REPAIRS MAINT OF UTILITY SERVICES i e CRANES DG SETS AND OTHER MISC WORKS UNDER GE PULGAON

Amount

Maintenance and servicing of EOT cranes once in a month on rutine basis including attending faults on requirement basis at any time during contract period for normal repairs and replacement of defective & worn out parts by new spares for repairs, maintenance and complete overhauling of class II indoor duty double girder flame proof EOT cranes of capacity of 5 tonnes, installed in various locations of 'F' sub depot and 'B' sub depot complete including realignment of complete crane, guide wheels, girder, gears and testing of crane for load capacity for long travel, cross travel and deflection including, oiling, greasing of all movable parts such as steel ropes, gear drum, break units bronze wheels and checking all electrical circuits and finger contacts, fixed contacts arching contacts, auxiliary contacts situated in side crane control panel and cleaning thoroughly outer surface including marking crane details such as SM/MES Nos capacity, as directed by Engr-in-Charge complete alongwith the following :- (Note :- (a) Spare parts, electrical accessories and flexible cable etc require replacement shall be measured and paid separately under mentioned items as supply only and fixing is deemed to be included under this item. (b) Repair and rewinding of burnt out motor at workshop shall be measured and paid separately under respective items. (c) Labour and T&P required for lifting of crane to carryout the repairs of wheels and other misc works deemed to be inclusive in unit rate quoted.(d) Any other work required to make crane in perfect working condition though not specifically mentioned is also deemed to be included in unit rate quoted (e) All connected documents as required shall be maintained by the contractor and submit the same to Engineer-in-charge. (f) additional load testing of Crane if required as per user requirement shall be paid seperately (g) Total No of crane is 29 located at 'B' & 'F' subdepot.)

Disconnecting and removing the burnt out hoist electric motor flame proof carefully from the Crane and transporting the same to the work shop situated at Pulgaon and refixing the same in its original position after and including repair, Rewinding of motor winding with fine enameled beared copper conductor of same gauge, weight, turns along with insulating materials such as impregnated paper varnishing and keeping the rewinding in to the hot air oven till the moisture evaporates and achieving proper insulation resistance readings including testing and commissioning complete of capacity 5 HP, 415 Volts

All as per item No 2 ………….. but for 02 HP, 415 Volts.

All as per item No 2 …………. but for 01 HP, 415 Volts.

Supply only power contactor MNX type upto 32 Amp suitable for 5 ton crane 3 phase complete all as specified and directed by Engr-in-Charge . Make : BCH/L&T/Siemens/ Crompton Greaves.

Supply only spare kit, unit suitable for Power contactor upto 32 Amp 440 Volts complete all as specified and directed. Make : BCH/L&T/Siemens/Crompton Greaves.

Supply only push botton switches ON and Off inside the pendent/panel board of 5 Tons crane complete all as specified and directed. Make : L&T/Standard/Siemens

Supply only bimetalic overload relays suitable for Power Contactor upto 32 Amp 440 Volts with coil rating 110/230/440 volt coil complete all as specified and directed. Make BCH/L&T/ Siemens/ Crompton Greaves.

Supply only flexible FRLS copper cable PVC insulated multi stranded of size 4 core 2.5 Sqmm 1100 Volts grade complete all as specified and directed. Make :Finolex/Paragon/Plaza/ Anchor/ Havells or Polycab

Supply only flexible FRLS copper cable PVC insulated multi stranded of size 4 core 6 Sqmm 1100 Volts grade complete all as specified and directed. Make : Finolex/Paragon/Plaza/ Anchor/ Havells or Polycab

Supply only flexible FRLS copper cable PVC insulated multi stranded of size 4 core 4 Sqmm 1100 Volts grade complete all as specified and directed. Make : Finolex/Paragon/Plaza/ Anchor/ Havells or Polycab

S&F MCCB 4 pole, 125 Amp, 415 V,25 KA adjustable thermal & magnetic settings in to the existing panel board including taking out old one complete all as specified and directed. make L&T/Havels/ Legrand/Crompton Greaves

S&F MCCB 4 pole, 100 Amp, 415 V,25 KA adjustable thermal & magnetic settings in to the existing panel board including taking out old one complete all as specified and directed. make L&T/Havels/ Legrand/Crompton Greaves

S&F MCCB 4 pole, 63 Amp, 415 V,25 KA adjustable thermal & magnetic settings in to the existing panel board including taking out old one complete all as specified and directed. make L&T/Havels/ Legrand/Crompton Greaves

S&F MCCB 3 pole, 125 Amp, 415 V, 25 KA adjustable thermal & magnetic settings in to the existing panel board including taking out old one complete all as specified and directed. make L&T/Havels/ Legrand/Crompton Greaves

S&F MCCB 3 pole, 100 Amp, 415 V,16 KA adjustable thermal & magnetic settings in to the existing panel board including taking out old one. make L&T/Havels/ Legrand/Crompton Greaves

S&F MCCB 3 pole, 63 Amp, 415 V,16 KA adjustable thermal & magnetic settings in to the existing panel board including taking out old one. make L&T/Havels/ Legrand/Crompton Greaves

Supply and fixing in repairs steel wire rope of tensile strength more than 6.5 tonne to 8 tonne capacity EOT Crane with proper locking arrangements complete all as specified and as directed.

M&L for repair and overhauling flame proof thrustor brake system of crane any type/make complete all as specified and as directed.

Supply and fixing in repair flame proof Limit Switch of existing size and make cranes with new one of same size and capacity complete of make Sudhir or equivalent as approved.

Supply only bearing of suitable size of capacity 1/2/3 HP for long travel motor

Supply only bearing of suitable size of capacity 1/2/3 HP for cross travel motor

Supply only bearing of suitable size of capacity 1/2/3 HP for hoist motor

Supply only bearing of suitable size of capacity 1/2/3 HP for main gear box including oil seal

Dismantling, lowering down of LT and CT wheels for cleaning , greasing, overhauling of wheel shaft, wheel bearing and replacement of LT and CT wheels bearing complete set (Set of 08 wheel ) and refixing all the wheel after servicing complete all as specified and directed by Engineer-in-Charge.

M&L for repair VVVFD (Variable voltage variable frequency drive) suitable for 5 tonnes crane of existing size and capacity along with all connected items and testing complete all as specified and directed by Engineer-in-Charge.

Supply only veriynt grade ISO68 hydraulic oil for topup suitable for break system of EOT crane complete all as specified and directed by Engineer-in-Charge.

M and L for carrying out load Test of crane 5 tonnes capacity under 120% of full load capacity of cranes on hoisting , long travel and cross travel for checking the performance including deflection test with necessary manpower , instruments, necessary internal transportation required complete all as specified and directed by Engineer-in-Charge.

Maintenance and servicing of DG sets once in a month on rutine basis including attending faults on requirement basis at any time during contract period for normal repairs including replacement of defective & worn out parts by new spares such as filters, gaskets, V belts, Engine oil, rubber hoses, worm drive clamps, nut bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc and greasing of bearings of engine and alternator, checking of batteries, adding distilled water, checking of oil and coolant levels as directed by engineer-in Charge. ( Note : - 1. Spare parts require replacement shall be measured and paid separately under mentioned items as supply only and fixing is deemed to be included under this item. 2. Servicing to be carried out as per manufacturer instruction 3.The rates includes dismantling and taking out DG set from position and trasporting it to the workshop if required & return same location and fixing the serviceable parts in position and replacement of unserviceable parts with new parts. The new replaced parts shall be measured and paid for separately under respective item of Sch `A’ as `supply only ‘ but quoted rates are inclusive of replacement of small/minor parts such as nuts, bolts, washers, locking nuts, small springs, screws/studs.

D G Set 320 KVA, Engine make:Cummins, Location : F subdepot

D G Set 250 KVA, Engine make:Cummins, Location :F subdepot

D G Set 200 KVA, Engine make:GREAVES,Location: Cotton market pump house

D. G . Set 200 KVA, Engine make:GREAVES,Location: Cotton market pump house

D. G . Set 160 KVA, Engine make:GREAVES,Location:Main gate depot

D. G . Set 82.5 KVA, Engine make:GREAVES,Location:Gunjkheda pump house

D. G . Set 82.5 KVA, Engine make:GREAVES,Location:Gunjkheda pump house

D. G . Set 62.5 KVA, make: Kirloskar,Location: No 1 substation

D. G . Set 62.5 KVA, make: Kirloskar,Location: B sub depot

D. G . Set 62.5 KVA, make: Kirloskar,Location: B sub depot

D. G . Set 62.5 KVA, make: Kirloskar,Location: B subdepot

D. G . Set 62.5 KVA, make: Kirloskar,Location: B sub depot

D. G . Set 62.5 KVA, make: Kirloskar,Location: B sub depot

D. G . Set 15 KVA, make: Kirloskar,Location: D sub depot

D. G . Set 15 KVA, make: Kirloskar,Location:DSOI

D. G . Set 12.5 KVA, make: Kirloskar,Location:MAP Pump house

D. G . Set 10 KVA, make: Kirloskar,Location:A sub depot

D. G . Set 10 KVA, make: Kirloskar,Location:B sub depot

D. G . Set 10 KVA, make: Kirloskar,Location:C sub depot

D. G . Set 10 KVA, make: Kirloskar,Location:C subdepot

D. G . Set 10 KVA, make: Kirloskar,Location:D sub depot

D. G . Set 10 KVA, make: Kirloskar,Location:D sub depot

D. G . Set 10 KVA, make: Kirloskar,Location:D sub depot

D. G . Set 10 KVA, make: Kirloskar,Location:E sub depot

D. G . Set 10 KVA, make: Kirloskar,Location:Main fire station

Supply only piston (TD piston+ Pin ) as standard size, of DG set 160KVA to 320 KVA, 1500 RPM (Note :- Fixing element of these items is included under the rates quoted by the contractor for Schedule `A' item No 29.

All as per item No 30 ...but cylinder liner

All as per item No 30 ...but piston rings set

All as per item No 30 ...but Inlet & Exhaust valves

All as per item No 30 ...but Valve guide

All as per item No 30 ...but valve spring inner & outer

All as per item No 30 ...but oil sump packing kit complete

All as per item No 30 ... for gasket kit complete set

All as per item No 30 ...but lubricating oil filter with o'ring element

All as per item No 30 ...but diesel filter with o'ring element

All as per item No 30 ...but air filter element

All as per item No 30 ...but by pass filter element

All as per item No 30 ...but set of hose pipe with clamps complete set

All as per item No 30 ...but RPM and hrs meter complete with chain.

All as per item No 30 ...but oil pressure gauge

All as per item No 30 ...but water temperature gauge

All as per item No 30 ...but oil temperature gauge

All as per item No 30 ...but turbo Charger

All as per item No 30 ...but Fan belt

All as per item No 30 ...but belt for alternator unit

All as per item No 30 ...but flexible pipe set

All as per item No 30 ...but fuel steel braided pipe with benjo bolts and washers etc complete of suitable length

Supply only piston (TD piston+ Pin ) suitable for existing DG set 62.5KVA to 82.5 KVA, 1500 RPM, (Note:Fixing element of these items is included under the rates quoted by the contractor for BOQ item No 29 )

All as per item No 52 but cylinder liner as standard size,

All as per item No 52 ...but piston rings set

All as per item No 52 ...but Inlet & Exhaust valves

All as per item No 52 ...but valve guide

All as per item No 52 ...but valve spring inner & outer

All as per item No 52 ...but oil sump packing kit complete

All as per item No 52 ...but gasket kit complete set

All as per item No 52 ...but lubricating oil filter with o'ring element

All as per item No 52 ...but diesel filter with o'ring element

All as per item No 52 ...but air filter element

All as per item No 52 ...but by pass filter element

All as per item No 52 ...but set of hose pipe with clamps complete set

All as per item No 52 ...but RPM and hrs meter complete with chain.

All as per item No 52 ...but oil pressure gauge

All as per item No 52 ...but water temperature gauge

All as per item No 52 ...but oil temperature gauge

All as per item No 52 ...but turbo Charger

All as per item No 52 ...but Fan belt

All as per item No 52 ...but belt for alternator unit

All as per item No 52 ...but flexible pipe set

All as per item No 52 ...but fuel steel braided pipe with benjo bolts and washers etc complete of suitable length

Supply only valve guide suitable DG set 10 KVA to 15 KVA, 1500 RPM of Existing make Note :- Fixing element of these items is included under the rates quoted by the contractor for Schedule `A' item No 29 above

All as per item No 74 ...but valve spring alongwith seating washers

All as per item No 74 ...but piston .

All as per item No 74 ...but gasket set complete

All as per item No 74 ...but piston sleeve standard

All as per item No 74 ...but piston rings set

All as per item No 74 ...but Inlet & Exhaust valves

All as per item No 74 ...but valve spring inner & outer

All as per item No 74 ...but oil sump packing kit complete

All as per item No 74 ...but lubricating oil filter with strainer o'ring element

All as per item No 74 ...but diesel filter with o'ring element

All as per item No 74 ...but air filter element

All as per item No 74 ...but set of hose pipe with clamps complete set

All as per item No 74 ...but RPM and hrs meter complete with chain.

All as per item No 74 ...but oil pressure gauge

All as per item No 74 ...but water temperature gauge

All as per item No 74 ...but oil temperature gauge

All as per item No 74 ...but turbo Charger

All as per item No 74 ...but Fan belt

All as per item No 74 ...but belt for alternator unit

All as per item No 74 ...but flexible pipe set

All as per item No 74 ...but fuel steel braided pipe with benjo bolts and washers etc complete of suitable length

All as per item No 74 ...but Crank shaft with connected accessories

M&L for servicing, repair, rewinding of Armature of DG Set 10KVA to 15 KVA capacity complete all as specified and as directed.

M&L for Servicing Repair, Field winding DG Set 10KVA to 15 KVA capacity complete all as specified and as directed.

Material and labour for replaement of Crank shaft with connected accessories of DG set 10 KVA to 15 KVA capacity of existing make all as specified and directed.

Calibaration of fuel injection pump including replacement of service kit, bearing, spring washers, copper washers, benjo bolt, gasket complete for the capacities of DG set 160 KVA to 320KVA of size complete as specified and as directed. [ Note : (i) Spares parts as per exisiting DG set of required for replacement will be measured and paid as supply only under respective items hereinafter (ii) A Certificate to the effect that the calibration and repairs has been carried out by the authorised dealer shall be submitted by the contractor.]

Supply only Nozzle for DG set 160 KVA to 320KVA

Supply only FIP Element for DG set 160 KVA to 320KVA

Supply only FIP overflow valve for DG set 160 KVA to 320KVA

Supply only FIP screen filter for DG set 160 KVA to 320KVA

Calibaration of fuel injection pump including replacement of service kit, bearing, spring washers, copper washers, benjo bolt, gasket of DG set 62.5 to 82.5KVA complete all as specified and as directed. (Note : (i) Spares required for replacement as per exisiting DG set under respective items hereinafter will be measured and paid as supply only). (ii) A Certificate to the effect that the calibration and repairs has been carried out by the authorised dealer shall be submitted by the contractor.

Supply only Nozzle for DG set 62.5 to 82.5KVA

Supply only FIP Element for DG set 62.5 to 82.5KVA

Supply only FIP overflow valve for DG set 62.5 to 82.5KVA

Supply only FIP screen filter for DG set 62.5 to 82.5KVA

Calibaration of fuel injection pump including replacement of service kit, bearing, spring washers, copper washers, benjo bolt, gusket complete for the capacities of DG set 10 to 15KVA complete as specified and as directed. (Note : (i) Spares as per exisiting DG set of 10 KVA to 15 KVA required for replacement will be measured and paid as supply only). (ii) A Certificate to the effect that the calibration and repairs has been carried out by the authorised dealer shall be submitted by the contractor.

Supply only Nozzle of DG set 10 to 15KVA

Supply only FIP Element for DG set 10 to 15KVA

Supply only FIP overflow valve for DG set 10 to 15KVA

Supply only FIP screen filter of DG set 10 to 15KVA

Disconnecting and taking down old unserviceable self starter, 12Volt DC and dismantling complete for repair, servicing, cleaning, varnishing, oiling, reassembling & testing including replacement of the Following parts :- (a) Rewinding of armature – 01 No (b) Solenoid switch – 01 No. (c) Field coils – 01 No. (d) Commutator – 01 No. (e) Carbon brush – 02 Nos (f) Bendex assembly – 01 No

Disconnecting and taking down old unserviceable self starter, 24 Volt DC and dismantling complete for repair, servicing, cleaning, varnishing, oiling, reassembling & testing including replacement of the Following parts :- (a) Rewinding of armature – 01 No (b) Solenoid switch – 01 No. (c) Field coils – 01 No. (d) Commutator – 01 No. (e) Carbon brush – 02 Nos (f) Bendex assembly – 01 No

M & L for repairing of battery charging alternator engine mounted with replacement of any of the unserviceable part such as rectifier with voltage regulator , diode plate , carbon brushes for the following capacities and as directed by engineer-In- Charge :-(Note : Nuts , bolts, wahers and included in above rates and spare parts shall be measured and paid separately).

24 volts capacity

12 volts capacity

Supply & pouring of coolent suitable for radiator as per the requirement of time to time as directed by Engr-in-charge for various capacities of DG Set (Make : SERVO/CASTROL/PUROCOOL)

Preparation of existing surface of D.G. Set including radiator and fuel tank at various locations capacity 200 KVA to 320 KVA by scraping out the old existing peeled off paint layer, filling the cavities with suitable filler, making the surface smooth and applying two coats of synthetic enameled paint any approved colour complete set including writing necessary details of D.G. Set SM and MES No. in the pattern and style with stencil using synthetic enameled white paint all as directed by Engineer-in-Charge.

Preparation of existing surface of D.G. Set at including radiator and fuel tank various locations capacity 62.5 KVA to 82.5 KVA by scraping out the old existing peeled off paint layer, filling the cavities with suitable filler, making the surface smooth and applying two coats of synthetic enameled paint any approved colour complete set including writing necessary details of D.G. Set SM and MES No. in the pattern and style with using synthetic enameled white paint all as directed by Engineer-in-Charge.

Preparation of existing surface of D.G. Set including radiator anf fuel tank at various locations capacity 10 KVA to 15 KVA by scraping out the old exiting peeled out paint layer filling the cavities with suitable filler, making the surface smooth and applying two coat of synthetic enameled paint any approved colour complete set including writing necessary details of D.G. Set SM and MES No. in the pattern and style with using synthetic enameled white paint all as directed by Engineer-in-Charge.

Supply and fix in repair lead acid battery 12 Volts 180 AH for DG set with initial charging and having indicators to know the status of level of electrolyte complete. Make- Exide/ standard Furukawa/AMCO/Amaron. Note: Contractor shall provide guarantee card as supplied by the manufacturer for additional period of guarantee of service in addition to defects liability period.

Supply and fix in repair lead acid battery 12 Volts 150 AH for DG set with initial charging and having indicators to know the status of level of electrolyte complete.Make-Exide/standard Furukawa/AMCO/Amaron. Make- Exide/ standard Furukawa/AMCO/Amaron. Note: Contractor shall provide guarantee card as supplied by the manufacturer for additional period of guarantee of service in addition to defects liability period.

Supply and fix in repair lead acid battery 12 Volts 100 AH with initial charging and having indicators to know the status of level of electrolyte complete.Make-Exide/standard Furukawa/AMCO/Amaron. Make- Exide/ standard Furukawa/AMCO/Amaron. Note: Contractor shall provide guarantee card as supplied by the manufacturer for additional period of guarantee of service in addition to defects liability period.

S & F in repair Copper 12V battery Terminals (Positive and Negative - one set) suitable for 100 / 120/ 180 AH as per existing complete all as specified and directed by Engr-in Charge.

S & F in repair Battery led (Positive and Negative - one set) copper not less than one metre each with suitable for 100 / 120/ 180 AH as per existing complete all as specified and directed by Engr-in Charge.

Disconnecting and taking out carefully old unserviceable "AVR with Diode" of 10KVA to 15 KVA of DG set and supply and fix new AVR with Diode as per existing make complete all as specified and directed.

Disconnecting and taking out carefully old unserviceable "AVR with Diode" of 62.5KVA to 82.5 KVA of DG set and supply and fix new AVR with Diode as per existing make complete all as specified and directed.

Disconnecting and taking out carefully old unserviceable "AVR with Diode" of 160KVA to 320 KVA of DG set and supply and fix new AVR with Diode as per existing make complete all as specified and directed.

Supply and filling lubrication oil SAE-40 ( 20 W- 40 grade) of Make SERVO, IOC/HINDUSTAN PETROLEUM/BPCL/ CASTROL) as approved by GE.

Supply and filling lubrication oil SAE-40 ( 15 W- 40 grade) of Make SERVO, IOC/HINDUSTAN PETROLEUM/BPCL/ CASTROL) as approved by GE.

Supply and applying Petroleum jelly.(1 kg plastic sealed container.) complete all as specified and directed.

Supply and fill in batteries distilled water for topping up complete all as specified and directed.

Supply & Fill Electrolyte of suitable Sp gravity for lead acid batteries in sealed container complete all as specified and directed.

S & F in repair Indicator lamps with holder 15 mm screw type complete all as specified and directed.

S & F in repair CT cast resin type of ratio 200/5 amps, of suitable VA burden, complete all as specified and directed. Make : AE / L&T / Nutech / Amol

S & F in repair CT cast resin type of ratio 100/5 amps, of suitable VA burden, complete all as specified and directed. Make : AE / L&T / Nutech / Amol

Replacement of asbestos ropes with new asbestos rope of existing size of exhaust pipe 10 KVA to 15 KVA D.G. Set complete all as specified and directed.

Replacement of asbestos ropes with new asbestos rope of existing size of exhaust pipe 62.5 KVA to 82.5 KVA D.G. Set complete all as specified and directed.

Replacement of asbestos ropes with new asbestos rope of existing size of exhaust pipe 160 KVA to 320 KVA D.G. Set complete all as specified and directed.

Dismantling of oil sump and drainingout old engine oil from DG set from 160 KVA to 320 KVA capacity and cleaning the oil sump chamber by removing settled particals, sludge etc for pressure vacuum including rectifying the leakage by welding including refixing the same by replacement of new nuts, bolts clamps all as specified and directed.

All as per item No 132…………..but for DG Set of capacity 62.5KVA to 82.5 KVA.

All as per item No 132…………..but for DG Set of capacity 10 KVA to 15 KVA.

Disconnecting, and taking out carefully old unserviceable rectifier of any make and capacity,supplying and fixing new rectifier of existing make suitable for 160 KVA to 320 KVA DG set complete all as specified and directed.

All as per item No 137…………..but for DG Set of capacity 62.5KVA to 82.5 KVA.

All as per item No 137………..but for DG Set of capacity 10 KVA to 15 KVA.

Dismantling radiator assembly complete from 160KVA to 320KVA DG set carefully taking it to workshop if required and cleaning with acid/descalling solution in copper tubes & fins including repairing of botton plate & rectify the leakage by soldering welding and re-fixing the same and testing complete all as specified and directed.

All as per item No 140…………..but for DG Set of capacity 62.5KVA to 82.5 KVA.

All as per item No 140…………..but for DG Set of capacity 10 KVA to 15 KVA.

Taking down old unserviceable changeover switch off size 4 pole 100 Amp for various DG Set and supply and fix of Onload change over with rotary handle complete all as secified and directed by Engr-In-Charge.

All as per item No 143 … but for 04 pole 200 Amp

M&L for rewinding 3 HP motor of DG Set with existing size super enamelled copper wire including heating,vernishing and required insulating materials

Supply and fix in repairs AMF panel toggle switch complete all as specified and directed.

Supply and fix in repairs Start and Stop push button complete all as specified and directed.

Supply and fix in repairs Relay Card complete all as specified and directed.

Supply and fix in repairs LED Lamp with holder (RYB) complete all as specified and directed.

Supply and fix in repairs AH meter complete all as specified and directed.

Supply and fix in repairs Fuel indicator meter complete all as specified and directed.

Supply and fix in repairs Test Lamp complete all as specified and directed.

S & F in repair Time delay relay suitable for 10 to 15 KVA DG Set complete all as specified and directed.

S & F in repair Time delay relay suitable for 62.5 to 82.5 KVA DG Set complete all as specified and directed.

S & F in repair Time delay relay suitable for 160 to 320 KVA DG Set complete all as specified and directed.

Supply and fix in repair control wiring of the DG set up to 125 KVA complete incl provision of additional auto cables heavy duty suitable for Gen set application complete all as specified and directed.

Supply and fix in repair control wiring of the DG set above 125 KVA up to 320 KVA complete incl provision of additional auto cables heavy duty suitable for Gen set application complete all as specified and directed.

Supply and fix in repair single phase preventer suitable for operation on 415 volt 50 HZ AC supply complete all as specified and directed. (Make- L&T/Minilec)

M&L for tap setting of following capacities of DG sets complete all as specified and directed.

D. G . Set 10 to 15 KVA

D. G . Set 62.5 to 82.5 KVA

D. G . Set 160 to 320 KVA

S & F in repair Power contactor 415v, 50Hz, AC suitable for following DG set Control panel / AMF Panels for the following capacities complete all as specified and directed

All as per item 163 D. G . Set 62.5 to 82.5 KVA

All as per item 163 D. G . Set 160 to 200 KVA

All as per item 163 D. G . Set 250 to 320 KVA

Supply and fix in repairs fuse base suitable for cylindrical / DIN fuse link for following capacities complete all as specified and directed

All as per item 167 125 Amps capacity

All as per item 167 160 Amps capacity

All as per item 167 250 Amps capacity

All as per item 167 400 Amps capacity

Supply and fix in repair DIN type HRC fuse link type HN of capacity 125 Amps complete all as specified and directed

Supply and fix in repair DIN type HRC fuse link type HN of capacity 160 Amps complete all as specified and directed

Supply and fix in repair DIN type HRC fuse link type HN of capacity 250 Amps complete all as specified and directed

Supply and fix in repair DIN type HRC fuse link type HN of capacity 400 Amps complete all as specified and directed

SHRI RANI SATI TRADERS

SHREE SIDDHIVINAYAK TRADERS

M/S Maa Durga Constructions,Pulgaon

M/S JAI BHAWANI CONSTRUCTIONS

Bidder Name

SHRI RANI SATI TRADERS

SHREE SIDDHIVINAYAK TRADERS

SHUBHAM SALES AND ENGG WORKS

M/S Maa Durga Constructions,Pulgaon

M/S JAI BHAWANI CONSTRUCTIONS