REPAIRS TO JOINERY, ROOFING, CEILING, FLOORING AND ALLIED SERVICES AT BIKRAM ENCLAVE, IFA (NC) AND NODE UNDER AGE B/R-II, GE (SOUTH) UDHAMPUR

Amount

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt. ) , all as specified and directed.

Description all as per item No 01 above but area exceeding 1.50 square metre and not exceeding 4 square metre each.

Taking down shutters of any descriptions area exceeding 1 square metre and not exceeding 2 square metre each complete all as specified and as directed.

Pressed steel frames for doors, made out of 1.25 mm thick MS sheet, with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete, of frame size 125 mm x 60 mm, including one shop coat of red oxide zinc chrome primer, including filling voids with PCC 1:3:6 type C-0 complete all as specified and as directed.

Description all as per item No 04 above but frame size 105 x 60mm.

35 mm thick, factory made, 2nd class hard wood (Sal/Hollock), plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

35mm thick, factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete, all as specified and directed.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 50 x100mm/ 65 x125mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter/ wire mesh door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge.

Mild steel framed work as in frames to manhole covers of angle iron or other section including holdfast conforming to Fe 290-0 or Gde-E-165, complete all as specified and as directed.

19mm thick ISI, termite proof , chemically well pressed, prelaminated particle board exterior grade prelaminated, one side with decorative choice lamination and other side balancing white lamination fixed with screws to frame work for kitchen cabinetstand & cup boards etc includimg 6mm th teak wood beading all around complete all as specified and directed.

Pre-laminated 18mm thick lead free factory made 100% solid WPC (wood polymer composite) sheet having high natural fiber conter 25 to 30% wood colour sheets with density not less than 500 kg/cum and the weight of sheet of 1 Sqm should be 11 kg (+/- 5%) manufactured by ISO 9001-2015 certified company. the sheet should be 100% water proof, ermite proof, fire ratardant, manufacured by single layer extrusion process with exellent screw holding capacity and shore D hardnes, compete as per direction by Engr-in-Charge.

Steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all specified and as directed. Notye : i) The window shall be fabricated as per Drg No CEUZ/TD/1517/15 Sheet 1/3 to 3/3 (ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

Description all as per item above No. 13 but without glazing bar complete all as specified and as directed.

Factory made mild steel ventilators box type with upper top hung shutters and bottom fixed type shutters including pintol hinges, steel peg stay and one shop coat of red oxide primer complete all specified. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3. ii) MS fillets, glazing, wire gauge shall be measured and paid for separately.

Door seal for wooden/Aluminium/steel door shutter complete all as specified and as directed.

Brass magic eye suitable for 180 degree fixed to wooden door shutter, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar, barred iron doors; ladder, framed balusters; railing; frame work for water tanks, etc and similar work conforming to FE 290-0 or Gde-E-165, complete all as specified and as directed.

Granite stone 20mm thick (table rubbed and polished) in window cills, cooking plateforms and the like not less than 1 sqm (in one piece0, laid over 15mm thick layer of cement mortar 1:3 after roughning of existing concrete surface and applying a layer of neat cement slurry @ 3kg/sqm including pointing in white cement 1:2 using marble dust with admixture of pigments to match with shade of stone, including demolition of stone slabs and tiles of any description or thickness in floors etc. laid, bedded and pointed in any mortar complete all as specified and as directed.

Machine cut kota stone slab flooring 18-20 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including Screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4, complete all as specified.

Harrison , rails drapery rod powdered coated including brackets and necessary fitting as directed.

150 mm aluminium handles, cast type anodised complete all as specified and directed. (ISI Mark)

150mm long, aluminium anodised, barrel tower bolts (ISI Marked) of extruded section and fixed, complete all as specified and directed.

Stainless steel cold rolled butt hinges medium weight 100 mm long, including fixing to pressed steel door frame if required complete all as specified and directed.

Stainless steel cold rolled butt hinges medium weight 75 mm long, including fixing to pressed steel door frame if required complete all as specified and directed.

Stainless steel cold rolled butt hinges medium weight 50 mm long, including fixing to pressed steel door frame if required complete all as specified and directed.

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed.

2nd class soft wood beads, straight (any size) for glazed or gauzed joinery, renewed, including miters etc., complete all as specified and as directed.

MS helical door spring 300mm size incl roller and roller plate fixed to wooden or steel frames with welding etc. complete all as specified and as directed.

Hasp and staple, 100 mm size safety type aluminium anodised with mild steel hinges pin, including bolt to hinge plate and fixed with screws, complete all as specified and as directed.

20mm dia brass chromium plated tubular towel rails, D type,60 cm long between flanges fixed in repairs complete all as specified and as directed

200 mm long stainless steel barrel tower bolts, stove enameled black, with bright bolt, complete all as specified and as directed.

Stainless steel sliding door bolt plate type 250 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified.

Stainless steel sliding door bolt plate type 300 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified.

150 mm long stainless steel pressed steel handle, oval type, stove enameled black complete all as specified.

Hacking out old broken glass panes (any thickness size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips complete all as specified.

3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified.

4mm thick figured glass (frosted) ,pin head type and glazing with oil putty not exc 0.50 Sqm in each pane fixing to window/ventilator complete all as specified and as directed.

2nd class hard wood small fittings such as shaped door & window stops, cleat including all necessary labours, articles not exceeding 200 cubic centimeter each complete all as specified.

Supply and fixing glass self 600mm long including CP supporting clamps, screws etc, complete all as specified and as directed. Make : Jaquar Cat part No AKP-35771P or equivalent as per specifed in PS.

Corner Glass shelf with chromium plated guard rails complete all as specified and as directed. Make Jaquar Cat No ACN-1171N

1mm thik plate rack made of stainless steel, 600x750x250 mm (Wt not less than 7.5 Kg) including brackets and embedded in brick wall all as specified and as per manufacturers instruction complete all as specified and as directed.

Providing 40 mm thick cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregates as in floor and finished even and smooth without using extra cement complete all as specified and as directed.

Providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (not exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints through out the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.

Plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregates) as in steps, seismic and other similar bands, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, cills, lintels upto 1.50 metre clear span, copings etc. and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form works, all as specified and directed.

Plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in surface channels and drains including necessary formwork, complete all as specified and as directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, removing all type of vegetation (like peeple tree etc) scrubbing down with water complete, all as specified and as directed.

15 mm thick rendering on fair faces of brick or stone/concrete surfaces in cement mortar 1:4 and finished surface even and smooth without using extra cement complete with water proofing compound all as specified.

15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified.

10 mm thick rendering on fair faces of brick /concrete surfaces as in ceiling in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified.

Rendering 15 mm thick cement plaster 1:4 on wall/ ceiling/ chajja/ facia/ beam/ coloumn including taking down, cleaning using preservative material and match the existing surface with white wase, cement base paint/ appex and distemper which is required exceeding 0.50 Sqm but not exceeding 1.0 Sqm complete all as specified and directed.

Applying one coat of oil bond distemper on walls including preparation and complete removal of existing treatment from old decorated plastered or unplastered surfaces of walls, tint and shade as approved by Engr-in-charge, complete all as specified.

Applying two coat of oil bond distemper on walls after preparation of newly plastered surfaces complete all as specified.

Preparation of new plastered surfaces of ceiling and applying two coats of white wash, complete all as specified and as directed.

Preparation of new plastered or concrete surfaces of wall and applying two coats of cement base paint, complete all as specified.

Preparation of old plastered or concrete surfaces of wall and applying one coat of cement base paint, complete all as specified.

Preparation of old decorated plastered surfaces of ceiling and applying one coat of white wash, complete all as specified and as directed.

Preparation of old decorated plastered surfaces of walls and applying one coat of white wash, complete all as specified and as directed.

Applying one coat of wall putty on walls to give uniform surface complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

25 mm thick, Plain cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in sub base for laying floor finishes including finishing the surfaces even and rough without using extra cement, complete all as specified and as directed.

Glazed Coloured Ceramic tiles in vertical surface 300x450x7mm thick incl laid over 10 mm thick screed bed in CM 1:4, set and joint in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

M&L for Non skid coloured tiles (square/rectengular) 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes under floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified.

Non skid coloured tiles (square/rectengular) 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes under floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified.

All as per serial item No. 66 here in before but on vertical surfaces as in skirting/dado over and including 10 mm thick screed bedding/ backing layer in CM 1:3, complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.

Brick work with old size sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and as directed.

Walling of random rubble stone masonry uncoursed, with best quality locally available stones, well bonded, bedded and solidly hearted , built in cement mortar 1:6 complete all as specified and as directed.

Flush pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:4, complete all as specified & directed.

Preparation of new wooden or wood based surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

Preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide/zink chrome primer complete, complete all as specified and as directed.

Plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) for filling in the pressed steel door frame/hold fast complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets, any thickness, including cover fillets, complete all as specified and as directed.

AC designer composite ceiling board 4mm thick in 600mmx600mm panel confirming to IS-14682 type-B category-3 including GI frame work with size of grid 605x605mm for seemless ceiling comprising of GI perimeter , holdfast & suspenders and all accessories complete all as specified and as directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings incl ridges, all as directed complete all as specified and directed.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

Mild steel Rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails guides for sliding doors, and vertical posts of pipes sections fixed with angle cleats or other connecting plates, Fe-410-W (Gde - E -250), complete all as specified and as directed.

s l sharma and sons (BID ID -3456125)

M/S SUSHEEL KUMAR Govt. CONTRACTOR (BID ID -3456359)

khajuria builders (BID ID -3455992)

SINGH CONST CO (BID ID -3459209)

TULSI RAINA AND SONS (BID ID -3461972)

VARDHMAN INTERNATIONAL (BID ID -3461526)