Construction of drain from the H/o Sh. Krishan Chand upto Nallah in ward No. 13 Hiranagar.

Amount

Labour to be engaged for site clearance by way of removal of malba and drain clearance before execution of work.

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms , incl. disposal or filling of excavated earth wherever required as per the directions of Engineer-in-charge .

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) incl. all leads, lifts & carriage of material by MT / H.L.

Providing and laying damp proof course 40 mm thick with cement concrete 1 : 2 : 4 ( 1 cement : 2 coarse sand : 4 graded crushed stone aggregate 12.5 mm nominal size) including all leads, lifts and carriage of material by MT / H.L

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone agg. 20 mm nominal size) incl. all leads, lifts & carriage of material by MT/ H.L.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars including all leads, lifts & carriage of material by MT / H.L.

Centering & Shuttering incl. removal of formwork

Foundations, footings, bases of columns etc. for mass concrete.

Suspended floors, roofs, landings, balconies and access platform.

12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand) incl.all leads, lifts & carriage of material by MT / H.L.

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110 mm diametre

M/S KULJEET SINGH

yash paul