Bhusawal(CZ) - Proposal for renovation/repairs of officer colony swimming pool work. (ZBB-25-26)

colony swimming pool.

Item- 1 DSR 2023 items

S No. Item Description of Item Unit Qty Rate Amount

2.0 EARTH WORK

2.1S General

Earth work in excavation by mechanical means

(Hydraulic excavator)/manual means over areas

(exceeding 30 cm in depth, 1.5 m in width as

well as 10 sqm on plan) including getting out

and disposal of excavated earth lead upto 50 m

and for all lift, as directed by Engineer-in-charge.

4.0 CONCRETE WORK

4.1S CEMENT CONCRETE (CAST IN SITU)

Providing and laying in position cement concrete

of specified grade excluding the cost of

centering and shuttering - All work up to plinth

derived from natural sources : 6 graded stone

aggregate 20 mm nominal size derived from

natural sources)

5.0 REINFORCEMENT CEMENT CONCRETE

5.1S CAST IN SITU

Providing and laying in position specified grade

of reinforced cement concrete, excluding the

cost of centering, shuttering, finishing and

reinforcement - All work up to plinth level :

derived from natural sources : 3 graded stone

aggregate 20 mm nominal size derived from

natural sources)

5.9S FORM WORK

Centering and shuttering including strutting,

propping etc. and removal of form for

5.9.2 Walls (any thickness) including attached Sqm 12 842.5 10110

4 pilasters, buttresses, plinth and string courses

5.22S STEEL REINFORCEMENT

BHUSAWAL DIVN-ENGINEERING/CENTRAL RLY

Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in

position and binding all complete upto plinth

5.22.6 Thermo-Mechanically Treated bars of grade Fe- Kg 100 107.85 10785

8.0 CLADDING WORK

8.1S General

Providing and fixing 18 mm thick gang saw cut,

mirror polished, premoulded and prepolished,

machine cut for kitchen platforms, vanity

counters, window sills, facias and similar

locations of required size, approved shade,

colour and texture laid over 20 mm thick base

cement mortar 1:4 (1 cement : 4 coarse sand),

joints treated with white cement, mixed with

matching pigment, epoxy touch ups, including

rubbing, curing, moulding and polishing to edges

to give high gloss finish etc. complete at all

8.2.2 Granite stone slab colour black, Cherry/Ruby red

10.0 STEEL WORK

10.1S General

10.28 Providing and fixing stainless steel ( Grade 304) Kg 750 772.4 579300

railing made of Hollow tubes, channels, plates

etc., including welding, grinding, buffing,

polishing and making curvature (wherever

required) and fitting the same with necessary

stainless steel nuts and bolts complete,

including fixing the railing with necessary

8 accessories & stainless steel dash fasteners ,

stainless steel bolts etc., of required size, on the

top of the floor or the side of waist slab with

suitable arrangement as per approval of

Engineer-in-charge, (for payment purpose only

weight of stainless steel members shall be

considered excluding fixing accessories such as

nuts, bolts, fasteners etc.).

13.0 FINISHING

13.1S CEMENT PLASTER (IN FINE SAND)

13.1 12 mm cement plaster of mix :

15.0 DISMANTLING AND DEMOLISHING

15.1S General

Dismantling tile work in floors and roofs laid in

15.23 cement mortar including stacking material

within 50 metres lead.

22.0 WATER PROOFING

22.1S General

BHUSAWAL DIVN-ENGINEERING/CENTRAL RLY

Providing and applying integral crystalline slurry

of hydrophilic in nature for waterproofing

treatment to the RCC structures like retaining

walls of the basement, water tanks, roof slabs,

podiums, reservoir, sewage & water treatment

plant, tunnels / subway and bridge deck etc.,

prepared by mixing in the ratio of 5 : 2 (5 parts

integral crystalline slurry : 2 parts water) for

vertical surfaces and 3 : 1 (3 parts integral

crystalline slurry : 1 part water) for horizontal

surfaces and applying the same from negative

(internal) side with the help of synthetic fiber

brush. The material shall meet the requirements

as specified in ACI-212-3R-2010 i.e. by reducing

permeability of concrete by more than 90%

compared with control concrete as per DIN 1048

and resistant to 16 bar hydrostatic pressure on

negative side. The crystalline slurry shall be

capable of self-healing of cracks up to a width of

0.50 mm. The work shall be carried out all

complete as per specification and the direction

of the engineer-in-charge. The product

performance shall carry guarantee for 10 years

against any leakage.

22.23.1 For vertical surface two coats @ 0.70 kg per sqm Sqm 125 472.9 59112.5

22.23.2 For horizontal surface one coat @1.10 kg per Sqm 425 362.8 154190