8245 ADDITION/ ALTERATION TO OFFICERS/ SAILORS BATHROOM AND TOILETS AND CONNECTED WORK OF MWC (MBI)

Amount

Taking down cement plaster on brick / surfaces built in cement mortar including raking out joints, bading for key scrubbing down with water etc complete.

Dismantling floor hearth or wall tiling including cement mortat bedding but not backing), removing serviceable tiles to store and rubbish off the premises.

Taking down chowkats or frame with shutter ( without taking off shutter from frame) , n exc 1.5 sqm each complete all as specified.

Taking down chowkats or frame with shutter ( without taking off shutter from frame) exc 1.5 sqm but n exc 4 Sqm each complete all as specified.

Taking down 15mm bore, GI tubing and connections including cleaning for refixing or removal to store.

All as per item No 5 above but 20 mm bore GI Pipe.

S & F 20 mm bore UPVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, celing etc or in floors etc

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar all as specified.

S&F PVC Connections 15mm size with PTMT nuts of length 450mm

Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, etc

M & L for Pre cast Cement concrete block masonary (type B1 1:2:4 20 mm graded aggregate) with solid blocks exc 10 cm in width and setting in CM (1:6)

M&L brick work with sub class 'B' bricks old size, straight or curved on plan exc 6m mean radius in cement mortar 1:4 complete all as specified.

M & L for brick work with sub class 'B' bricks (old Size) straight or curved on plan to any radius in half brick thick wall built in CM 1:4.

Demolition of cement concrete in sunken floor and paving not exceeding 15cm thick below or above ground level un re-inforced complete all as specified and directed. .

M&L for PCC of type D2, 1:4:8 using (40mm graded stone aggregate) 100mm thick as in sub base complete all as specified and directed.

Material & labour for water proofing plaster for sunken portion in CM 1:3, 15 mm thick in two coats with integral water proofing compound at the rate of 3 % by weight of cement and finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge

Material & labour for water proofing treatment of sunken floor/wall surfaces by applying two coats of elastomeric coatings of BRUSHBOND RSX in FOSROC or TECKFORCE 2K STRONG in CHOWKSEY CHEMICALS or equivalent as a two component flexible elastomeric coating with minimum 2mm thickness layer complete all as per manufacture's instructions and as directed.

S&F 4mm thick backelite with decoratve choice laminated on both side complition as specified and as directed

S&F 4.8mm thick sheet glass froasted or obscured one side and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete all as specified and as directed

S&F 4mm thick sheet glass froasted or obscured one side and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete.

S & F 100 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11.

S&F Stainless steel butt hinges 100 mm.

S&F Aluminium anodised sliding door bolt 300m long, with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy .

S&F aluminium anodised Barrel tower bolts of extruded section, length of bolt 200mm.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified.

S&F Extrude aluminium anodised alloy handles, fabricated type 200mm size.

M & L for Floor door stopper of aluminium alloy body 150 mm long and tongue, anodised, with hard drawn steel spring, fixed in floor.

Rounding to edges of stone slabs on edge, such as in steps, cooking platform and making grooves for lining and other similar work complete all as specified and directed.

S&F hand dryer all as specified and directed.

S&F soap dispenser all as specified and directed.

S&F contactless fittings wherever applicable all as specified and directed.

S&F 15 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed complete all as specified and as directed.

As per item No 28 above but 20mm dia medium GI Pipe

S&F vitreous china wash down water closet pan ( pedestal pattern) , white (excluding fixing bolts, flushing cistern and flush pipe) but with & including plastic seat cover of approved colour with flat bottom , and cover and mild steel chromium plated or aluminised hinging device etc complete

S & F in repairs single piece WC with UF Soft close slim seat cover fixing accessories, accessories set and cistern fitting incl trap/connecting piece complete all as specified and directed.

S&F vitreous china soap tray embedded in wall with Soap dish vitreous china white appx size 160x160x90mm as fixed in repair complete all as specified and directed.

S&F in repairs waste coupling of PTMT (half or full threaded) (Minimum weight 32mm45gms/40mm-60 gms) (bore dia of discharge pipe is 32mm) complete all as specified and directed.

S&F PVC low level flushing cistern 10 Ltr capacity with complete fittings, flush pipe & float valves,handle incl brackets etc complete.

S&F in repair counter top wash hand basin incl chromium plated brass waste coupling and PVC waste pipe complete all as directed

S&F push tap any colour of PTMT screwed for iron pipe and fixed suitable for urinals, (Minimum weight 15mm-50gms) complete all as specified and directed.

S&F for health faucet ABS Body with 8 mm dia 1 mtr flexible tube and wall hook (Make - Jaquar CAT PART No-ALD-CHR-585) complete all as specified and as directed by Engr-in-Charge.

S&F 15 mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed.

S&F 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle handle screwed both ends .

S&F 15 mm dia fancy type pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes all as specified and directed.

S&F in repairs PVC Connections 15mm size with PTMT nuts of length 450mm screwed socket of brass on both ends and rubber washer.

M&L PVC SWR floor trap 75mm, plain with grating including setting and jointing with silvent cement

S&F of vitreous china urinal, half stall type complete including providing andfixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugswith and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, inlet ,outlet etc complete all as specified Fixed in repairs.

S&F brass CP towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F towel ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms)

S&F toilet paper holder of vitreous china box type white coloured fixed to walls with chromium plated (CP) brass screws

Supply only flush pipe of Polyethylene of low or high density or PVC 32 mm dia. Complete all as specified and directed.

S &F in repairs 160 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S &F in repair 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S &F in repair 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F for PVC (SWR) bends any radius 160mm bore complete all as specified and as directed

S&F for PVC (SWR) bends any radius 110mm bore complete all as specified and as directed

S&F for PVC (SWR) bends any radius 75mm bore complete all as specified and as directed by Engr-in-Charge.

S&F Solid PVC Door Frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed by EIC.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. M.S.frame shall be covered with heat moulded design with colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed by EIC.

S&F aluminium window, doors with shutters / frames / partitions made out of extruded powder coasted aluminium sections, with sliding or openable shutters including frame & necessary joining cleats, glazing clip, powder coated aluminium snap beading, screws etc; complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts hooks and eyes, peg syays and handles including connected items, with and including, making good to the disturbed portion with its original specification, complete all as specified and directed.

S&F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F Prelaminated particle board, 19 mm thick exterior grade, prelaminated both side with decorative choice lamination , fixed with screws to timber/Aluminium frame work. All as specified and directed.

S&F aluminium alloy wire cloth, 0.56mm dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staple complete all as specified and as directed

Removing bldg material to a distance of 30km or beyond the lead including in the rates, including loading, unloading and stacking at the destination all as specified and directed

M & L for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick(square/Rectanglar) area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floor including 15mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M & L for Coloured glazed ceramic tiles in vertical surface 450X350X7mm thick with and including 10 mm thick cm (1:4) backing coat and Triangular filliting at top of skirting, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets.

S&F Anodised aluminium snap grid size 605x605mm frame work for false ceiling all as specified.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M&L for false ceiling made out of 600x600x 4 mm thick ( non asbestos fiber cement designer/coloured)ceiliing board / tiles deep panel (Make -Armstrong/Chanakya/Everest.

S&F in repair 12mm thick, toughened glass for door shutters, partitions, shelves etc with and including fitting and fixtures such as glass handles ss studs, fittings for door pivots etc complete all as directed.

M&L in repairs for double action floor spring hydraulically regulated made up of minium 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as per manufacturer's instruction.

S & F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers

M&L 4 mm thick plain glass sheets ordinary quality in squares n.exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc all as specified and directed.

M&L 4 mm thick plain glass sheets ordinary quality in squares exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc all as specified and directed.

Supply only integral water proofing compound pidiproof LW+ of Dr Fixit or equivalent.

Dismantling plain or corrugated steel sheeting, any gauge or thickness incl Nainital or similar pattern roof coverings all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M & L for Framed work such as grills, gratings, chequered/plain plate,beam,rolled section ,framed,truss purline,rafter sun shed etc with ends of bars shouldered and/or riveted or welded, or forged into spikes, framed guard bars, barred iron doors, ladders, farmed balastures, walk ways, railings, frame work of water tanks ,wind tie,and similar work conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

S & F for Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. complete

M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finishing the surface fair and even and smooth without using extra cement all as specified and directed.

M&L for rendering 20 mm thick pre polymer modified ready mixed cement based plaster in two coats 12 mm thick base coat and 8 mm thick finishing/final coat. Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces incl using richer mix for making corners if necessary incl making grooves of existing size and necessary two legged MS pipe scaffolding as wherever required incl curing required upto G plus 5rd floor bldg complete all as specified and directed.

M&L Plastering 5mm thick in CM 1:3 on concete surfaces as in ceiling finished even & smooth without using extra cement in ceiling complete all as specified and as directed .

M & L preparation of new plastered surfaces and applying three coat of white wash on ceiling

M&L for preparation of newly plastered surfaces of wall, applying two coats of oil emlusion distemper over a coat wall care putty of 3 mm thick and alkali primer.

M & L for New treatment of walls and applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall including preparation of newly plaster surface and necessary scaffolding upto G-3 storey complete all as specified and directed by EIC.

M&L prepration of old plastered / decorated surfaces of walls/ ceiling including complete removal of existing treatment by washing, rubbing down and stopping of distempered and painted surface and applying two coat of oil bound distemper over alkaline resistant primer with 3mm thK wall care putty on wall surfaces etc complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper all as specified and directed

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)®

Material & Labour for complete removal of old painted plastered surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over plastered surfaces.

S & F in repairs for aluminium anodised Deco grill 7.5 mm size DG-102, fixed to F/H frames, 1.5mm th, bar size 6.2mm and 7.5mm thick in required sizescomplete all as specified and as directed by Engr-in-Charge.

S&F rotational moulded polythylene water storage loft tank tank of 300 ltr capacity hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) all as specified in SSR Part I.

Removing bldg material exc. 1.50 km but n exc. 5 km and depositing where directed

M&L Plastering 5mm thick in CM 1:3 on concete surfaces as in ceiling finished even & smooth without using extra cement in ceiling complete all as specified and as directed .

M&L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L Kota stone slab 20-25mm thick in riser of steps,skirting,dado and pillar laid over cement screed and jointed with ditto with item no 7 incl. 15mm thick backing coat in cement mortar 1:4 complete all as specified.

M&L brick work with sub class 'B' bricks old size, straight or curved on plan exc 6m mean radius in cement mortar 1:6 complete all as specified.

M&L rendering 15mm thick in CM 1:4 on brick surfaces, finished even and smooth (without using extra lime or cement Neeru finish on walls complete all as specified and as directed.

S&F louver made up of 3mm thick aluminium composite panel (approved colour/shade) for ventilator and fixed to new or exishting aluminium frame as per site requirment including cutting, notching, bending to shape as required jointing with silicon gel of approved colour complete all as specified and directed.

S&F in repair aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 102, 7.5 mm thick all as specified and as directed by Engr- in- charge.

S&F 200 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

M&L for roughening surfaces of old concrete surfaces by picking, sweeping cleaning and washing down with water to remove dust etc including taking down tarfelt complete as specified.

M& L for 100mm thick PCC 1:3:6 type C2 using 40mm graded granite stone aggregate as in subbase including necessary formwork complete all as specified and directed by Engineer-in-Charge.

M&L for sand cushioning, under floors or in foundations including watering and consolidation, spreading and levelling in layers n exc 25 cm thick and well ramming including watering as required.

M&L for pre painted machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour incliuding filling the joints with rising surface vibrator etc complete all as specified.

M&L 20mm thick mirror polished Granite (of any type) work as in steps, jambs, pillars, cooking platforms, working table and like over 15 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

M&L rendering 20mm thick in two coats(15mm inner coat 5mm finishing coat) on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound on finishing coat in the proportion as mentioned in manufacturer's instructions including all as specified and directed. (Water proofing compound to be measured and paid for separately).

M&L for cement concrete 1:3:6 type C-1, (20 mm graded stone agg) as in guard wall, kerb and edges etc all as specified and directed.

Taking down carefully old U/S point wiring copper/Aluminum (light/ fan /sockets/power) complete with switches, sockets, fan regulators, ceiling roses, lamp holders, brackets, ,removing material for schedule of credit and making good to disturbed surfaces as directed by Engineer-in-Charge

M&L for concealed point wiring complete with 1.5 Sq.mm single core multistranded PVC insulated & sheathed copper conductors cable 1100 volts FRLS grade ISI make and drawn through & including PVC Conduit with Accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI make terminal boxes fixed on wall as per site requirement/metallic terminal boxes concealed in wall suitable for modular accessories with cover plate and frame including one PVC insulated & sheathed multistranded copper conductor 1.5 Sq. mm as earth continuity conductor connected to common earth dolly including modular box and cover plates all as specified.Notes: a) Colour coding shall be followed as given below:- i) Phase - Red ii) Neutral - Black iii) Earth - Green b) Make of wire : Polycab/ Havells/ Finolex/Plaza/Benlo c) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit. Note : - PVC Casing Capping will be used where PVC conduit not feasible.

(a) One light point controlled by one 5A switch

(b) One Fan point/Exhaust fan point controlled by one 5A switch

(d) One 5A flush type switch socket point on same board board

(e) One 5A flush type switch socket point on independent board

M&L for concealed point wiring complete with 2.5 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make drawn through & including PVC Conduit with Accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI make terminal boxes fixed on wall as per site requirement/metallic terminal boxes concealed in wall suitable for modular accessoriesi with cover plate and frame including one PVC insulated & unsheathed multistranded copper conductor 2.5 Sq. mm as earth continuity conductor connected to common earth dolly for single board having 1 x15 Amp switch socket point for independent board complete including required size and numbers moduler box and cover plate all as specified & directed. Note : - PVC Casing Capping will be used where PVC conduit not feasible.

M&L for concealed point wiring complete with proper colour coding using PVC insulated unsheathed multistranded copper conductor cable 4.0 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, ISI marked, not less than 25mm PVC Conduit with all accessories such as tee, bends, elbow, reducers, junction box etc fixed on wall/ceiling/truss with PVC non metallic ISI make terminal boxes fixed on wall as per site requirement/metallic terminal boxes concealed in wall suitable for modular accessoriesi with cover plate and frame and one run of PVC insulated unsheathed, multistranded copper conductor cable of 4.0 sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including required number and size of modular box with cover plate frame in any module complete necessary electric connection for each workstation point comprising of 03 Nos 6A sockets and 01 No 15A socket on same board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Switch socket measured & paid separately. Note : - PVC Casing Capping will be used where PVC conduit not feasible.

S & F ceiling rose surface bakelite 65 x 50mm, flush type, 3 terminals complete all as specified and directed by EIC.

S & F modular switch 1 way 6A all as specified and directed by EIC. Make: Roma/Legrand

S & F modular switch 1 way 16 A all as specified and directed by EIC. Make: Roma/Legrand

S & F modular socket, 6A - 2/3 pin combined 2 modules all as specified and directed by EIC. Make: Roma/Legrand

S & F modular socket outlet,6/ 16A,2 module all as specified and directed by EIC. Make: oma/Legrand

Supply and fixing in repair new generation ultraslim LED panel recessed LED 2X2 Luminaire 36 watt, CRCA powder coated body and high translucent diffuser provides high quality ecomonic energy saving lighting Suitable for 600 x 600 mm modular/POP/Gypsum ceiling. Make : Jaguar cat No LSVR01S036XC/Wipro/Bajaj/C&S

Supply and fixing in repair new generation walll/surface mounted 1x 20W LED batten fitting, 4 feet surface mounted provides high quality ecomonic energy saving lighting complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round block-02 Nos including connecting up with twin core twisted flexible copper conductor cable with suitable size and all as directed by Engr-in-Charge. Make : C&S/Wipro/Jaguarcat No LGLZ01x020XC/Bajaj

Supply and fixing in repair new generation walll/surface mounted 1x 10W LED batten fitting, 2 feet surface mounted provides high quality ecomonic energy saving lighting complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round block-02 Nos including connecting up with twin core twisted flexible copper conductor cable with suitable size and all as directed by Engr-in-Charge. Make : C&S/Wipro/Jaguarcat No LGLZ01x020XC/Bajaj

Supply and fixing in repair new generation Down light 15/18 Watt LED PDC aluminium housing downlights, high quality ecomonic energy saving light complete all as specified and directed. Bajaj/Wipro/Jaguar/Wipro/Bajaj/C&S

M&L for concealed sub-main wiring with 2 runs of 1.5 sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC conduit of suitable size with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 2.5sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex

M&L for concealed sub-main wiring with 2 runs of 4.0 sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC conduit/casing capping of suitable size with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 4.0 sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex

M&L for concealed sub-main wiring with 2 runs of 6.0 sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC conduit/casing capping of suitable size with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 6.0 sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex

S & F in repair MCB DB double door SPN 8 Way with 200 Amps rated copper bus bar, IP 43, IK 09 suitable for flush mounting and surface mounting complete etc all as specified and directed. Make: Legrand / Seimens/GE

S & F in repair MCB DB double door SPN 12 Way with 200 Amps rated copper bus bar, IP 43, IK 09 suitable for flush mounting and surface mounting complete etc all as specified and directed. Make: Legrand/ Seimens/GE

S & F in repair MCB SPN 40 A to 63 Amps,10KA , 'C' curve Make: Legrand/ Seimens/GE

S & F in repair MCB SP 6-32 Amps,10KA, 'C' curve, Make: Legrand/ Seimens/GE

M & L in repair for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to DBs or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire all as specified and directed by Engr-in-Charge.

M&L in repair JEF ECO SAFE Maintenance Free Grounding Solution set comprising of High tensile low carbon steel rod of 3 Mts length & 32 mm dia with 250 micron ( average ) molecularly bonded copper on the outer surface to confirm with requirements of UL467 along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr as per Clause 14.5D of IEEE : 80 standard. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. JEF ECO SAFE compound shall be supplied in 50 Pound Bag. ( 1 Bag required per earthing set). Back-fill comound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground. A suitable earth terminaton clamp should also be supplied along with the set incl Supply of Eco Friendly weather proof High Density Polyethylene Earth Pit Chamber. Note : Back-fill compund shall not be mixed with any soil while pouring in the bore hole.

S& F GI in repair cable tray perforated type 2 mm thick of size 600x50mm ( Including pre fabricated GI clamp suitable for fixing/supporting ) with 0.71mm thick aluminium sheet cover, alloy 31000 H4 in ridges, Hips vally gutter cable trucking for plain to be fixed on any wall (brick/stone) vertically/horizontally including all accessories complete bending,shaping,drilling,welding, cutting & all fixing arrangement complete etc all as directed Note : The cost of taking down existing cables of any size from any position and refixing on the cable tray including required material for the fixing of cables and cable tray is deemed to be included in the quoted rates.

Supply and fixing of touch free infrared hand dryer with minimum 1150 watt, single phase, 230 Volt complete all as specified and directed.

S&F heavy duty exhaust fan of size 300mm sweep 240V complete set with metallic body and louvers connecting up including provn of three core flexible copper wire of size 1.5 sqmm from ceiling rose to exhaust fan complete all as specified and directed. Make: Havells or equivalent

A.R. ENTERPRISE (BID ID -3504966)

GANGAJAL (BID ID -3492881)