INTEGRATED WELCOME MAINT INCLUDING E/M WORKS TO MD ACCN AT AGE AURANGABAD UNDER GE(S) AHMEDNAGAR

Amount

Taking down cement or cement lime plaster on brick wall, ceiling incl. raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for 10mm thick rendering on in cement mortar 1:6 fair faces of brick work or concrete surfacesfair surfaces of walls finished even and smooth w/o using extra cement complete all as specified and as directed.

M&L for 15mm thick plaster in cement mortar 1:4 on fair faces of brick work or concrete surface finished even and smooth w/o using extra cement complete all as specified and as directed.

M&L for 5mm thick rendering in cement mortar 1:3 as in ceiling surfaces finished even and smooth complete all as specified and as directed.

Demolition of stone/ brick masonry built in cement or cement lime mortar as in portion ordered and as directed.

M&L for brick work with old size sub class B bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Ditto above item except brick complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall over a coat of acrylic primer and applying two coats of acrylic emulsion distemper complete all as specified and as directed.

M & L preparation new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer complete all as specified and as directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and as directed

M&L for preparation of newly plastered surfaces and applying three coats of white wash on wall complete all as specified and as directed.

M&L for preparation of surface 1mm thick wall care putty complete all as specified and as directed.

M&L for preparation of old plastered surfaces of wall and applying two coat of white wash complete all as specified and as directed

M&L for preparing old plastered or unplastered old surfaces on ceiling applying one coat of white wash complete all as specified and as directed.

M&L for preparing of old surfaces of walls, pillasters, cornices etc by washing, rubbing down & stopping etc and applying one coat of acrylic emulsion distemper in any colour complete all as specified and as directed.

M&L for preparing of old surfaces of walls, pillasters, cornices etc by washing, rubbing down & stopping etc and applying two coat of acrylic emulsion distemper in any colour complete all as specified and as directed.

M&L for applying one coat of luster paint, interior grade on prepared old decorated surfaces of walls (plastered or unplastered) complete all as specified and as directed

M&L for applying two coat of luster paint, interior grade on prepared old decorated surfaces of walls (plastered or unplastered) complete all as specified and as directed

M&L for preparing of surfaces of walls by washing rubbing down & stopping of painted surfaces and applying one coat of cement base paint, in any colour complete all as specified and as directed.

M&L for preparing of surfaces of walls by washing rubbing down & stopping of painted surfaces and applying two coat of cement base paint, in any colour complete all as specified and as directed.

M&L for complete removal of existing treatment of old plastered or unplastered or old wall surfaces, preparation of surfaces and applying one coats of exterior acryclic emulsion weather coat paint, white or tinted complete all as specified and as directed.

M&L for complete removal of existing treatment of old plastered or unplastered or old wall surfaces, preparation of surfaces and applying two coats of exterior acryclic emulsion weather coat paint, white or tinted, over a coat of primer complete all as specified and as directed.

M&L for preparation of old painted wooden surface of any description and applying one coat of synthetic enamelled complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding, and rubbish off premises etc complete all as specified and as directed.

M&L for non-skid coloured ceramic tiles, 7 to 8 mm thick (square or rectangular), area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M & L for non-skid coloured ceramic tiles 7 to 8 mm thick ( square /Rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in cement mortar 1:6, complete all as specified and as directed.

All as per serial item No 27 above but as in dado / skirting or on vertical surfaces, laid over and including 10mm thick backing coat in cement mortar 1:4.

M&L for non-skid coloured ceramic tiles, 7 to 8 mm thick (square or rectangular), area of each tiles exc 0.18 Sqm but n exc 0.38 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over & including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

All as serial item No 29 above but as in dado / skirting or on vertical surfaces, laid over and including 10 mm thick backing coat in cement mortar 1:4.

M&L for vitrified tiles double charged (light shade), 8 to 9mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement to match with tile laid over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed.

All as serial item No 31 above but as in dado/skirting or on vertical surfaces but tile laid over 10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed.

M&L for vitrified tiles, 9-10 mm thick, any shade /Double charged/ ultracharged (Square or rectangular), area of each tile exc 0.42 Sqm but n exc 1.00 sqm as in floors, set and jointed in neat cement slurry & pointed in white or coloured cement to match colour of tiles, laid over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

All as per serial item No 33 above but as in dado / skirting or on vertical surfaces, laid over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified.

M&L for glazed ceramic tiles, coloured, (shade as approved by GE) of size 350mm x 250mm x 7mm/450mm x 300mm x 7 mm thick, as in dado, skirting, risers to step etc laid over and including 10 mm thick backing coat in cement mortar 1:4 in cement mortar on vertical surfaces, jointed in neat cement slurry and pointed in coloured cement to match with colour of tiles complete all as specified and as directed.

Dismantling of Kota stone slab, any type tile of any description in floor, laid, bedded & pointed in any mortar, all as specified and as directed.

M&L for 20-22 mm thick machine cut kota stone (size of Kota stone slab 22"x22") as in flooring, cooking platform etc including rounding to edges of stone slab, one edge such as cooking platform and other similar situation laid over and including 20 mm thick bedding layer of cement mortar 1:6, jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust complete all as specified and as directed.

All as per serial item No 37 above but as in risers to steps and staircase, skirting over and including 10mm thick backing coat in cement mortar 1:3 all as specified and as directed.

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as spd & directed. Note:- Colour/shade to be decided by GE/Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8, type D2, using 40mm graded stone aggregates as in sub base,flooring,paving complete all as specified and as directed.

M&L PCC (1:3:6) type C-2 using 20mm graded stone aggregate 75mm thick as in plinth protection finished fair even, laid in alternate bays n.exc 2m in length all as specified and as directed.

M&L for chequered cement concrete tiles glossi finish, rubberized 25cm x25cm x 25mm / 30cm x 30cmx25 mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigments over and including 15 mm thick screed bed in cement mortar 1: 6 complete all as specified & as directed.

Rounding to edges of stone slabs one edge,such as in steps, cooking platform, and other similar situations complete all as specified & as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames), area exc 1.50 sqm but n exc 4 sqm each and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames), area n.exc 1.50 sqm each and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and as directed.

Taking down shutters of any description, area exc 1 sqm & n.exc 2 sqm each leaf and complete all as specified & as directed.

M&L for rolled mild steel work angle iron as in door frame (Chowkhats) & cooler stand confirming to Fe-290 (Gde E165) including preparing back of chowkhat and simlar applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and as directed.

M&L for cement concrete type B-0 1:2:4 (12.5 mm graded agg ) as in bed block ,hold fast, coping and similar work etc complete all as specified and as directed.

S&F 30mm thick, flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both faces including teak wood beading 6mm thick all around complete all as specified and as directed.

S&F 35 mm thick second class hard wood, factory made, plain framed panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part I) kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 35mm thick second class hard wood glazed skelton shutters, factory made, open rebated and prepared to recive glass, guage etc, (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of sutters as specified in SSR part - I section - 8, clause 8.20 (a) and fixed to chowkhat complete all as specified and as directed.

S&F solid PVC door frame of size 50x47 mm, made out of 5mm PVC sheet reinforced with MS square tube as per specification drying as per manufacture instructions including all necessary fitting complete complete all as specified and as directed.

S&F 30mm thick factory made solid panel PVC door shutters made out of MS tubes of top and bottom rail MS frame shall be covered with heat moulded PVC "C" channel 5mm thick and having width of 50mm for from stiles and H section of 100mm wide for the rails, the inner panel 6mm thick PVC sheet insulated between frame and panel should be struck to the stiles and rails 50x30x5 mm, channel rails 100x30x5 mm H junction. The size, design and pattern of the paneled shutter shall be proceed by GE / Eng-in-Charge and all as per drawing / manufacture instructions complete all as specified including locking device and all necessary fitting etc here and after complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain moulded PVC Sheet Polyurethane painted on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S&F factory made steel windows with side hung shutter including box type hinges, steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F factory made steel windows with side hung shutter including box type hinges, steel handle and steel peg stay complete without glazing bars, complete all as specified and as directed.

S&F powder coated anodized aluminium frames for door, window , ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and as directed. Note :- Colour shall be decided by GE/Engineer-in-Charge.

S&F powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified. Note:- Colour shall be decided by GE/Engineer-in-Charge.

S&F powder coated aluminium anodized side hung type window/ventilators shutter without sash bars section weight not less than 0.55Kg/RM with extruded built up standard tubular and other sections of approved make according to IS(thickness of powder coating not less than 50micron including necessay glazing clips weight not less than 0.124Kg/Rm for fixing sheet glass anodized aluminium fittings/fixtures such as required number of roller of suitable size interlocking cleats/ plates etc as required for complete fixing window shutters complete all as specified and as directed. Notes:- (i) Only aluminium shutters for the window shall be measured in sqm. (ii) Sheet glass and wiremesh shall be measured and paid under respective item. (ii) Colour shall be decided by GE/Engineer-in-Charge.

S&F powder coated aluminum windows, three track, made out of aluminium sections (make Jindal or equivalent) including all necessary fittings, 5mm thick sheet glass, rubber/ neoprene beading, locking arrangements all as specified and as directed comprises of following sections :- (a) Window frame:- (i) Bottom- Section 20671 (Wt not less than 0.699 Kg/m) (ii) Top & Size - 20672 (Wt not less than 0.594 Kg/m) (b) Shutter:- (i) Vertical (end)- 20669 (Wt not less than 0.548 Kg/m) (ii) Vertical (lock) - 20689 (Wt not less than 0.481 Kg/m) (iii) Bottom - 20718 (Wt not less than 0.263 Kg/m) (iv) Top - 20668 (Wt not less than 0.377 Kg/m) Note:- Colour shall be decided by GE/Engineer-in-Charge.

S&F factory made UPVC any colour sliding window, three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note: (i) The unit rate quoted by contractor shall includes all connected accessories but excluding glass sheets. Glass sheets shall be measured and paid under respective item. (ii) Net opening shall be measured for payment purpose. (iii) Area not exceeding 2.00 sqm each (iv) Colour shall be decided by GE/Engineer-in-Charge.

S&F in position 4.8 to 5mm thick clear float/frosted glass of ordinary quality and glazing with glazing clips including necessary rubber packing to aluminium frame exc 0.5 sqm in each pane complete all as specified and as directed.

S&F position 4.8 to 5mm thick float/frosted glass on one side quality and glazing with glazing clips including necessary rubber packing to aluminium framen n. exc 0.5 sqm in each pane all as specified and as directed.

M&L for framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors,ladders; framed baluster, railings and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed

S&F 0.9m to 1.5m bottom door seal brown aluminium frame 38 to 45mm width all as specified and as directed.

S&F in repair mild steel helical door spring 150mm ordinary rat tail type including roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and as directed.

M&L for preparing the new wooden surface & applying two coats of synthetic enamel paint (1st grade) over one coat of pink primer over 10 cm width or girth complete all as specified & as directed.

M&L for preparation of new steel surfaces over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed on wooden/steel frames with tinned tacks or galvanized wire staple & complete all as specified and as directed.

S&F in repair stailess steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed on wooden/steel frames with tinned tacks or galvanized wire staple & complete all as specified and as directed.

S&F in repair 150 mm long floor door stopper of Aluminium alloy body tongue, anodised, with hard drawn steel spring fixed to door complete all as specified and as directed.

S&F 300mm ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F 75 mm size stainless steel butt hinges, medium weight, cold rolled, ISI marked, complete all as specified and as directed.

S&F butt hinges medium weight cold rolled mild steel ISI marked size 100 mm size complete all as specified and as directed.

S&F butt hinges medium weight cold rolled mild steel ISI marked size 125 mm size complete all as specified and as directed.

S&F 125mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and as directed.

S&F 150mm aluminium handle fabricated type, anodised conforming to IS complete all as specified and as directed.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and as directed.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and as directed.

S&F in repairs aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 200 mm long complete all as specified and as directed.

S&F in repairs aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 150 mm long complete all as specified and as directed.

S&F in repair 150mm aluminium handle fabricated type, anodised conforming to IS complete all as specified and as directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolts with hasps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F in repair 300mm long aluminium alloy, anodised, sliding door bolts with hasps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F in repair stainless steel handle 100 mm size complete all as specified and as directed.

Resecuring or easing of door shutters exc 1 sqm but n.exc 2 Sqm for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and as directed.

Resecuring or easing of window shutters, kitchen cupboard shutters, show case shutter drawers incl fixing of screws adjusting handles, knobs,tightening piano hinges including small adjustments complete all as specified and as directed.

Taking up or down 15mm bore existing steel tubing and connections complete all as specified and as directed.

Taking up or down 20mm bore existing steel tubing and connections complete all as specified and as directed

S&F GI water tubing, 15 mm bore, medium weight, ISI marked with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and as directed.

All as per serial item No 91 above but 20 mm bore

Fixing only 15mm bore GI tubing to walls, ceiling or laid on floor including necessary cleaning, cutting, screwing with and including new fittings such as elbow, Tee, union, socket, reducer etc. complete all as specified and as directed. Note : Old retrived serviceable GI tubing only shall be reused.

All as per serial item No 93 above but 20 mm bore

M&L for brick wall or plaster cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

S&F in repairs, vitreous China wash basin, white, flat back, size 550x400mm including brackets, waste coupling 32mm of PTMT (half or full threaded) (Minimum weight 32mm 45gms), waste pipe complete all as specified and as directed.

S&F in repairs, vitreous China, squatting pan, Orissa pattern, size 580 x 440mm, white with integral foot rests (excluding flushing cistern and flush pipe ) with vitreous China ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe , including PCC (1:2:4) type B-1 for fixing of WC and making good the floor to match the existing complete all as specified and as directed.

S&F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, including plastic white seat cover closed pattern with flat bottom and mild steel chromium plated hinge device including connections to drain (or outgoing pipe ) and to flushing pipe anti-syphonage pipe etc complete all as specified and as directed

S&F in repairs, PVC valveless syphonic action type low level flushing cistern, 10 Ltrs capacity, white, with inlet ball valve, float, handle with 32mm PVC flush pipe, fixed on walls by driling holes and using PVC rawl plug of suitable size complete all as specified and as directed.

S&F in repairs, plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as spd and as directed.

S&F in repairs, Stainless steel Jet with flexible tube upto 1 metre long with Stainless steel triangular plate fixed to European type W.C. complete all as specified and as directed.

S&F in repairs PVC connection, heavy duty 15 mm bore, 45 cm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and as directed.

S&F in repairs PVC waste pipe 32mm bore 600mm long with one end socketed complete all as specified & as directed.

S&F in repairs grating square 100mm size of Stainless steel with centre hole movable or side hole for fix to waste pipe complete al as specified and as directed

S&F in repairs grating square 100mm size of Stainless steel complete all as specified & as directed.

S&F in repair soap dish, any type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as specified & as directed.

S&F in repairs, health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and as directed.

S&F in repairs 15mm bore brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed in repair complete all as specified and as directed.

S&F in repair 15mm bore brass CP center hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

S&F Half/quarter turn chromium plated 15mm bore kitchen sink mixture 2 in 1 complete with bend pipe and wall flange, complete all as specified & as directed.

S&F in repair brass Chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified & as directed.

S&F in repairs, stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.

S&F in repairs, bib tap 15mm dia, cast copper alloy, fancy type, chromium plated, with crutch or butterfly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs 15mm bore chromium plated two way angle cock, screwed down,high pressure,with crutch or butterfly handle for iron pipe and fixed, complete all as specified & as directed.

S&F in repairs 15mm bore, fancy type pillar taps, cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with orwithout lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair tubular towel rail aluminium anodised 20mm dia 'D' type 60cm long between flanges complete all as specified & as directed.

S&F in repair sheet glass assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets guard and railing 60cm long complete all as specified and as directed.

S&F in repair sheet glass assembly consisting of 5.5mm thick sheet glass corner shelf complete all as specified and as directed.

S&F in repairs sink made of stain less steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union overall size not less than 495x420mm, bowl size 410x330x 160mm complete all as specified and as directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

M&L in repairs for 32 mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specifed and as directed.

S&F in repair bevelled edge looking mirror 5.5mm thick of size 60cmx 45cm mounted on commercial plywood 6 mm thick including PVC beading all round and fixed to wooden plugs with chromium plated screws complete all as specified and as directed.

Dismantling of existing unserviceable water tank of any description capacity exc 250 Ltr but n.exc 500trs capacity each complete all as specified and as directed

Dismantling water tanks of capacity exc 500Ltr and n.exc 1000Ltr and removing to store all as specified and as directed

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), 500 litres capacity, tripple layered, hoisted and fixed in position all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), 1000 litres capacity, tripple layered, hoisted and fixed in position all as specified and as directed.

M&L for cleaning of service tank upto 500 ltrs by removing all scale, dirt, silt, mud etc, from tanks and from mouths of circulating pipes including washing of tank internally with bleaching powder after removing scale dirt mud ec from tank and removing algae outside from tank from below bottom of tank and disinfecting tank by soraying sodium hypo chlorite solution in tank writing down date of cleaning on tank by synthetic enamel paint size of alphabet/numerical shall be minimum 7 cm using stencils complete all as specified and as directed. Note:- The quoted rate shall include dismantling and refixing of water tank and check float valve refixed or provide new as applicable as etc complete all as specified and as directed.

M&L for cleaning of service tank upto 1000 ltrs by removing all scale, dirt, silt, mud etc, from tanks and from mouths of circulating pipes including washing of tank internally with bleaching powder after removing scale dirt mud ec from tank and removing algae outside from tank from below bottom of tank and disinfecting tank by soraying sodium hypo chlorite solution in tank writing down date of cleaning on tank by synthetic enamel paint size of alphabet/numerical shall be minimum 7 cm using stencils complete all as specified and as directed Note:- The quoted rate shall include dismantling and refixing of water tank and check float valve refixed or provide new as applicable as etc complete all as specified and as directed

S&F in repair cover/lid for PVC any type water storage tank covers suitable for 500/1000 litre capacity all as specified and as directed

S&F in repair ball valves PTMT high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe, 20mm bore compete (Minimum weight 210 gm) complete all as specified & as directed.

S&F in repair 15mm ball valve high pressure of PTMT with apoxi coated aluminium rod and high density plastic ball screwed for iron pipe all as specified and as directed

S&F in repairs gun metal globe or gate valve, wheel head cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 20 mm dia, ISI marked complete all as specified & as directed.

S&F in repairs gun metal globe or gate valve, wheel head cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 25 mm dia, ISI marked complete all as specified & as directed.

S&F in repairs, harrison curtain rails 20mm dia, mild steel, plastic coated, fancy type with fixing brackets, stops with knob etc complete all as specified and as directed.

S&F in repairs toilet paper holder of chromium plated fixed to walls with chromium plated brass screws complete all as specified and as directed.

M&L for special treatment to sunken slab floor incl WC trap etc including cleaning and preparing the surface area for carrying out membrane water proofing treatment, then injection grouting the weak areas on the concrete surface with cementitious grout and applying 10mm thick cement plaster in CM 1:4. Then providing and laying Mineral Top APP (Atactic Polypropylene Polymer) modified prefabricated 5 layer 4mm thick water proofing membrane, black finished reinforce with non woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 Litre per Sqm by the same membrane manufacturer of density at 25ºC, 0.87-0.89 Kg per litre and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc and preparing the surface complete. and providing PCC 1:5:10 type E2 using 40mm graded mechanically crushed stone aggregates in sunken slab and 75mm thick PCC 1:4:8 type D2 using 40mm graded mechanically crushed stone aggregates as base, 40mm bore GI pipe, light grade of length not less that 50 cm as spout, non-skid glazed tiles as per existing pattern/size/tint with and incl WC vitreous china squatting pan 580x440mm with integral footrests/pedestal pan incl seat cover, white, area of WC n exc 1.50 Sqm etc after dismantling the existing sunken floor etc complete all as specified and as directed. Note : Work shall be carried out strictly by the authenticated applicator of the manufacturer and as per manufacturers specification as approved by GE.

All as per above item here-in-before but floor area of WC/bath-room/toilet exc 1.5 Sqm but not exceeding 3.0 Sqm.

S&F in repairs, 75 mm dia PVC(SWR) nahani/floor trap with grtaing including jointing to waste pipe with solvent cement, , complete all as specified and as directed.

Hacking out of old broken glass (any thickness ,size quality or description/ any height of bldg ) from wooden / metal frames including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or beads in square n.exc 0.50 sqm in each pane, of any description complete all as specified and as directed.

S&F 3 mm thick frosted/figured glass, pin headed type and glazing with oil putty in square n exc 0.5 Sqm in each pane to steel windows including glazing pins etc. complete all as specified and as directed.

S&F in repairs 18/19mm thick prelaminated particle board, interior, grade prelaminated one side with decorative choice lamination and other side balancing white, including teak wood lipping 19 x 6mm thick fixed with nails in shelves, Cupboard shutter and similar works all as spepcified and as directed.

S&F continous (Piano) hinges, brass finish of when open 30mm width of flaps complete all as specified and as directed

S&F 100mm size hasp and staple, aluminium anodised safety type, fixed with screws complete all as specified and as directed

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed

S&F in repair magnetic catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed

Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., and removal complete and all as specified and as directed.

S&F for 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & as directed.

S&F for 110 mm bore PVC (SWR) pipes single socketed with rubber ring joints, laid in trenches or in floors complete all as specified & as directed.

S&F for 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & as directed.

S&F for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & as directed.

S&F for 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified & as directed.

S&F for 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified & as directed.

S&F for 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

Supply only stack clamp out of 50mm by 3mm flat iron and 16 mm dia round iron stays fixed to pipe of bore 110mm complete all as specified and as directed.

S&F PVC bend/ shoe of dia 110mm complete all as specified including taking down old unserviceable complete all as specified.

Taking down carefully copper/Aluminum point wiring (Light, Fan, Socket or power) complete fitting such as switches, ceiling, regulator, sockets etc removing materials to be store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors etc and matching with existing surface complete all as specified and as directed.

M&L for point wiring complete with and including single core FRLS (H) PVC insulated unsheathed flexible bright annealed multi stranded copper conductor cables 1.5 Sqmm (22/0.30 mm) 1100 volts grade drawn through and including heavy grade PVC casing and caping on walls/ceiling including all accessories/fittings/ etc; ISI marked with and including factory made terminal boxes with cover plates suitable for modular type switches, sockets, fan regulators etc including 1.5 Sqmm (22/0.30 mm) 1100 V grade FRLS (H) PVC insulated, unsheathed flexible multi stranded copper conductor cable as continuous earthwire connected to metallic bodies of luminaires/fans etc; at one end and to common earth dolly at other end all as specified and as directed for one light point or one fan point controlled by one, one way switch.

All as per serial item No 158 but for one bell / buzzer point controlled by one push button on the same board with other or independent board

All as per serial item No 158 but for one 3/5 pin 5 Amp Socket outlet point on same board with other switches including earth wire as per description given above and connected to common earth and earth terminals.

All as per serial item No 158 but for one 5 pin 5 Amp Socket outlet point on independent board including earth wire as per description given above and connected to common earth and earth terminals

All as per serial item No 158 but for one light point controlled by two way switches

All as per serial item No 158 but with 2.5 Sqmm cables for one 15A, 6-Pin ( mulipurpose) socket outlet point on independent board with & including 2.5 Sqmm FRLS (H) cable as earth wire complete all as specified and as directed.

All as per serial item No 158 but with 4.0 Sqmm cables for one 15A, 6-Pin socket outlet point on independent board with & including 4.0 Sqmm FRLS (H) cable as earth wire complete all as specified and as directed.

M&L for point wiring complete with and including single core PVC insulated unsheathed flexible bright annealed multi stranded copper conductor FRLS (H) cables 1.5 Sqmm (22/0.30 mm) 1100 volts grade drawn through and including heavy grade PVC rigid conduits 20/25 mm or higher dia as reqd at site, totally concealed in walls/floors/ceiling including all conduit accessories/ fittings/ junction boxes/ inspection covers etc; of heavy grade, ISI marked and sunken terminal boxes of factory made 16 SWG pressed steel housing, totally concealed in walls with 3 mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk/cup washers, for mounting of switches, sockets fan regulates etc; including 1.5 Sqmm (22/0.30 mm) 1100 V grade PVC insulated, unsheathed flexible multi stranded copper conductor FRLS (H) cable as continuous earth wire connected to metallic bodies of luminaries/fans etc; at one end and to common earth dolly at other end, all as specified & as directed for light point or one fan point controlled by one, one way switch. (Note: The unit rate quoted shall deeemed to be included cutting chases in walls for concealed wiring & making good disturbed surfaces .

All as per serial item No 165 but for one light point controlled by two way switches

All as per serial item No 165 but for one bell / buzzer point controlled by one push button on the same board with other or independent.

All as per serial item No 165 but for one 3 pin 5 Amp Socket outlet point on same board with other switches including earth wire as per description given above and connected to common earth and earth terminals.

All as per serial item No.165 but for one 3 pin 5 Amp Socket outlet point on independent board including earth wire as per description given above and connected to common earth and earth terminals.

All as per serial item No 165 but for one but with 2.5 Sqmm cables for one 15A, 6-Pin socket outlet point on independent board with & including 2.5 Sqmm FRLS (H) cable as earth wire complete.

S&F modular switch single pole one way 6/5 Amps 1 module complete all as specified and as directed.

S&F modular switch single pole one way 16 Amps 1 module complete all as specified and as directed.

S&F of modular bell switch 5/6 Amp 1 Module complete all as specified and as directed.

S&F modular Switch 2 way 1 module complete all as specified and as directed.

S&F modular socket 6 Amp-2/3 pin combined 2 module complete all as specified and as directed.

S&F modular socket 6 A/16 Amp -2/3 pin combined 2 module complete all as specified and as directed

S&F modular fan regulator Step Type, 120W-2 Module Complete all as Specified and as directed.

S&F ceiling rose surface bakelite three terminal type complete all as specified and as directed.

S&F in replacement decorative ultra slim square profile LED lighting fixture with extruded polycarbonate,environmental friendly, energy efficient of capacity 18/20 Watt , 6500 K with inbuilt driver complete fitting and all other accessories fitting arrangements including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F in replacement decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient of capacity 10 Watt , 3000 K with inbuilt driver complete fitting and all other accessories fitting arrangements including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F LED light fitting 1x 9W / 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F lamp LED 9/10 Watt, 230 volts 50 Hz AC complete all as specified and as directed.

S&F in replacement MCB DB double door 4 way TPN with suitable rated busbar 240 V complete all as specified and as directed.

S&F in replacement MCB DB double door 16 way SPN with suitable rated busbar 240 V complete all as specified and as directed.

S&F in replacement MCB DB double door 12 way SPN with suitable rated busbar 240 V complete all as specified and as directed.

S&F in replacement MCB DB double door 8 way SPN with suitable rated busbar 240 V complete all as specified and as directed.

S&F in replacement MCB DB double door 4 way SPN with suitable rated busbar 240 V complete all as specified and as directed.

S&F in replacement MCB DB single door 2 way SPN with suitable rated busbar 240 V complete all as specified and as directed.

S&F in replacement single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp 240 Volts complete all as specified and as directed.

S&F in replacement of MCB SP, C Curve, 6 to 32 Amps 10 KA single pole AC 230 volts complete all as specified and as directed.

S&F in replacement of MCB SPN, C Curve, 40-63 Amps 10 KA single pole AC 230 volts complete all as specified and as directed.

S&F in replacement of MCB C Curve TPN 40-100 Amps, 415 V complete all as specified and as directed.

S&F in replacement of MCB C Curve TPN 16-32 Amps, 415 V complete all as specified and as directed.

S&F in replacement of bell multi music type, AC, 230 volts, single phase complete all as specified and as directed.

M&L for sub main wiring with 2 runs of 6.0 sqmm, single core, PVC insulated & unsheathed cable, conforming to IS-694, 1100 volts with copper conductor, multi stranded, drawn in and including suitable size PVC Cassing Capping (ISI marked) with all accessories such as Tees, Elbows, junction box etc as requied alongwith one run of 6.0 sqmm single core PVC insulated & unsheathed copper conductor as continuous earth wire dolly and connecting to existing main switch board / distribution board of each building as ordered and testing on completion including taking down old submain wiring and any type of casing/caping/Conduit complete all as specified and as directed. Note : Two runs of 6.0 Sqmm cable, one run of 6.0 Sqmm cable and one run of PVC casing/caping will be measured as one unit.

M&L for sub main wiring with 2 runs of 4.0 sqmm, single core, PVC insulated & unsheathed cable, conforming to IS-694, 1100 volts with copper conductor, multi stranded, drawn in and including suitable size PVC Cassing Capping (ISI marked) with all accessories such as Tees, Elbows, junction box etc as requied alongwith one run of 4.0 sqmm single core PVC insulated & unsheathed copper conductor as continuous earth wire dolly and connecting to existing main switch board / distribution board of each building as ordered and testing on completion including taking down old submain wiring and any type of casing/caping/Conduit, complete all as specified and as directed. Note : Two runs of 4.0 Sqmm cable, one run of 4.0 Sqmm cable and one run of PVC casing/caping will be measured as one Rm unit.

M&L for sub main wiring with 2 runs of 2.5 sqmm, single core, PVC insulated & unsheathed cable, conforming to IS-694, 1100 volts with copper conductor, multi stranded, drawn in and including suitable size PVC Cassing Capping (ISI marked) with all accessories such as Tees, Elbows, junction box etc as requied alongwith one run of 2.5 sqmm single core PVC insulated & unsheathed copper conductor as continuous earth wire dolly and connecting to existing main switch board / distribution board of each building as ordered and testing on completion including taking down old submain wiring and any type of casing/caping/Conduit, complete all as specified and as directed. Note : Two runs of 2.5 Sqmm cable, one run of 2.5 Sqmm cable and one run of PVC casing/caping will be measured as one unit.

M &L for sub main wiring with 2 single core FRLS PVC insulated unsheathed, multi stranded flexible copper conductor 1100 volts grade cables 4.0 Sqmm drawn through concealed/surface conduit and including PVC conduit with and including 1 single core 4.0 Sqmm 1100 V grade FRLS PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals including taking down old sub main wiring complete all as specified and as directed. Note: Two runs of 4.0 Sqmm cable, one run of 4.0 Sqmm cable and one run of PVC Conduit will be measured as one unit.

M &L for sub main wiring with 2 single core FRLS PVC insulated unsheathed, multi stranded flexible copper conductor 1100 volts grade cables 6.0 Sqmm drawn through concealed conduit and including PVC conduit with and including 1 single core 6.0 Sqmm 1100 V grade FRLS PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals including taking down old sub main wiring complete all as specified and as directed. Note: Two runs of 6.0 Sqmm cable, one run of 6.0 Sqmm cable and one run of PVC Conduit will be measured as one Rm unit.

M &L for sub main wiring with 2 single core FRLS PVC insulated unsheathed, multi stranded flexible copper conductor 1100 volts grade cables 2.5 Sqmm drawn through concealed/surface conduit and including PVC conduit with and including 1 single core 2.5 Sqmm 1100 V grade FRLS PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals including taking down old sub main wiring complete all as specified & directed. Note: Two runs of 2.5 Sqmm cable, one run of 2.5 Sqmm cable and one run of PVC Conduit will be measured as one unit.

S&F in replacement 1100 Volt grade, heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire one twin core cable flat of stranded multistrand conductor of size 4.0 Sqmm complete all as specified and as directed.

S&F in replecement 1100 Volt grade, heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and over all pvc sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire one twin core cable flat of stranded multistrand conductor of size 6.0 sqmm complete all as specified and as directed.

S&F in replacement 1100 Volt grade heavy duty cable PVC insulated aluminium Stranded conductor served with inner sheathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire one twin core cable flat of stranded multistrand conductor size 10.0 sqmm complete all as specified and as directed.

S&F in replacement 35/40 Watt building mounted LED security light fitting complete made up of pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07 & 10KV external SPD, including GI bracket made out of GI pipe 40/50 mm bore, medium grade pipe 1.2m long bend to shape required fixed to pole / wall with 02 Nos MS clamps made out of flat iron 40x5 mm including nuts, bolts and washer, painting with two coats aluminium paint over a coat of primer, suitable for LED fitting complete all as specified and as directed.

M&L in repairs/replacement earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground( earth pit not less than 2.25 mtrs deep below normal ground level) with the top edges of plate not less than 1.5 mtrs below normal ground level connected to GI wire 4mm by means of GI nuts, bolts check nuts and washers earth lead protected by 15mm dia GI pipe light grade and connected to main distribution board/earthing test point all as shown in electrical plate No 5 of SSR part 1 and all as specified including testing on completion. Notes:-The unit rate also including for excavation, earth work in any type of strata, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix, type B1 cover reinforced with 8mm dia TMT bars @150mm C/C both ways ,GI funnel with watering pipe, wire mesh, protection pipe for earth lead upto 7.50m long complete in addition to item No. 1(a) to (e) preamble (notes) under sub heading earthing, specified in SSR Part ll. Earth strip beyond 7.5m shall be measured and paid separately.

Taking down electric water heater (geyser) of any type/capactiy for repairs, dismantling the accessories carefully after disconnecting the water/electric connection and transporting to workshop (if required) for repairs and refixing the same in original position after repairs and connecting up the water/electric connections including testing complete all as specified and as directed. Note : Replacement of unserviceable parts shall be measured and paid seperately.

S&F heating element, triangular or square type, 1500watts, 230 volts, suitable for geyser and as per approved sample all as specified and as directed.

S&F heating element, triangular or square type, 2000watts, 230 volts, suitable for geyser and as per approved sample all as specified and as directed.

S&F thermostat, auto cut with thermal setting upto 80 degree centigrade, 230 Volts, suitable for existing geysor(25/35/50 lit) of various capacities all as specified and as directed.

S&F inner copper, water storage tank of 25 ltr capacity geyser existing at site all as specified and as directed.

S&F psyphon assembly suitable for 25 ltr capacity geyser existing at site all as specified and as directed.

S&F in replacement indicator, lamp red/green for geyser all as specified and as directed.

S&F in replacement for mild steel hold fast/fasteners fixing to wall, suitable for hanging of geyser of any capacity including making good surface with cement mortar 1:4 and surface finished as per existing surfaces including taking down old existing hold fasts/brackets complete all as specified and as directed.

S&F in replacement, heat resistant, PVC, flexible connection pipe, 450 mm long, suitable for 15 mm dia pipe with brass creamed nipple and nuts, heavy duty pressure grade 6 Kg/cm2 all as specified and as directed.

Taking out the old thermostat/heating element and refixing the same after descaling/ cleaning and making electrical connection and calibrating/adjusting to a temperature rating as per manufacturer recommendations all as specified and as directed.

Taking down unserviceable ceiling fan of any sweep and make from site, transporting to local workshop, cleaning external portion with washing soda for removing oily stain, opening and cleaning internal portion with Kerosene oil, drying it out, oiling / greasing properly, replacing unserviceable bearing / bush / rubber bush for arm with nuts & clamp / flexible wire and reassembling ensuring speedy and noiseless run and hanging the same at site complete all as specified and as directed. Note :- (i) Spares if required shall be measured and paid separately under respective items as supply only, however cost for fixing in repairs/replacement shall deemed to be included in the unit rate quoted. (ii) Repairs to winding is not included in this item.

Taking down unserviceable exhaust fan of any sweep and make from site, transporting to local wksp, cleaning external portion with washing soda for removing oily stain, opening and cleaning internal portion with kerosene oil, drying it out, oiling / greasing properly, replacing unserviceable bearing / bush / rubber bush for arm with nuts & clamp / flexible wire and reassembling ensuring speedy and noiseless run and hanging the same at site complete all as specified and as directed. Note :- (i) Bush, bearing, capacitor and canopy, shackle insulator with nuts, bolts and sockets shall be measured and paid separately as supply only but fixing in repairs/replacement shall deemed to be included in the unit rate quoted against the item. (ii) Repairs to winding is not included in this item.

Supply only capacitor 2.50 mfd to 3.15 mfd complete all as specified and as directed.

Supply only capacitor 4 mfd, for exhaust fan/wall mounted fans etc of 300mm / 450mm / 600 mm sweep complete all as specified and as directed.

Supply only canopy for ceiling fan (top and bottom), any size & make complete all as specified and as directed.

Supply only mild steel fan rod and clamps with rubber seal including nuts and bolts, split pin, suitable for ceiling fan 1200 / 1400 mm sweep complete all as specified and as directed.

Supply only ceiling fan blade set of 3 piece of aluminium sheet suitable for 1200 mm sweep, matching with the existing colour brown / white etc. complete all as specified and as directed.

M&L for preparation of surfaces and spray painting to ceiling fans (in situ) of any type, size and make, with super enamelled heat resistant synthetic white paint duly filling the cavities with filler and rewriting the MES number in black paint in appropriate size and shape all as specified and as directed.

M/s kishor M Lalwani (BID ID -3099860)

ASHWAMEDH ENGINEERS (BID ID -3100412)

kgn associate (BID ID -3095762)

D V Engineers and Contractors Pvt Ltd (BID ID -3098280)

M/S Tirupati Goroba Shendge (BID ID -3100415)

M/S. M.A. Sharief engineers and contractors (BID ID -3100323)

B.R.ANAND (BID ID -3099550)