GE/Token-48/2025-26

Excavation in trenches n.exc 1.50 mtr width and n.exc 1.5 mtre depth in soft/oose soil and getting out.

M&L for providing plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation and mass concrete complete all as specified.

M&L for 15-20mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified.

Returning filling in.including spreading, levelling watering and well ramming in layers n.exe 25 cm each layer all as specified.

Removal of surplus exacavted soil to a distance n. exc 50m and depositing where directed at a level n.exc 1.5 m high from the starting point all as specified.

1. M&L Supplying and laying of Precast U-Shape Strom water Drainhaving in to in dimension 450mm x 450mm of top thickness 50mm and bottom thickness of 70mm of 2000mm long each from T6 load carrying capacity-4.8Ton axel load and 2.4 T wheel load confirming to BIS/JIS having high performance self-compacting concrete M-40 cylindrical strength / M-50 Grade cube strength and Fe500/Fe550D reinforcement. The product should be manufactured in wet-cast method and dully steam cured for accelerated curing.The product shall have tie shape joint 10-20mm with 25mm depth groove as per BIS/JIS on both side of each storm water drain for jointing two precast storm water drains using cement mortar or suitable non shrink grout. The precast utility duct must consists of special in-built inlet at appropriate location for fixing de-shackle for mechanical installation, including supply transportation, installation of specific location at site in line, level, gradient and plumb with necessary testing commissioning etc complete all as specified and directed. 2. Contractor shall submit MOU withPrecast/ Prefabricated manufacturer who has executed precast/ prefabricated building workstwo works with satisfactory performance subject to satisfactory remarks with performance in respect of works in hand as reflected in Workload return (WLR) or any other report circulated by competent engineer authority. The contractor should have possessed Provident Fund Code Number and GST Registration Number. Only MES Enlisted contractor is eligible with MOU. complete all as specified and directed by eng in charge Note -1- including crain or hydra for laying drains. 2-Sample as installed at Sena bhawan and display at CWE Delhi Cantt Sample Room. 3-Once the precaste drains are on site (+,-) 5% of Each lot will be subjected to rebound hammer test +compressive testing. 4- Certificate from OEM with each batch from Authenticity.

Providing and fixing factory made pre caste High strength precast draine covers with hole, having concrete of strength not less than M-40, size 500 x 550 x 70 (mm), are varied as for site requirement , reinforeced with as per structural requirement TMT Grade Fe 500/550D,all as specified as per direction of eng in charge. Note -1- including crain or hydra for laying drains 2-Sample as installed at Sena bhawan and display at CWE Delhi Cantt

Demolition of cement concrete of any description and in any position not otherwise specifically provided for.

M&L for PCC( 1:3:6 ) type C-2 using 20mm graded stone as in padding on roof correction of slope and roof kerbs all as specified and directed.

M&L providing and applying the plaster with single component ready to use repair mortar (SMART CARE REPAIR MORTAR or equivalent) capable of applying 15mm average thickness in single layer and finishing with trowel with a bond coat: SBR polymer (@ 10% of cement weight) modified cementious bond coat @ 2.2 kg cement/Sqm of surface area mixed with specified portion of AP SMARTCARE or equivalent Repair Polymer including taking down existing roof treatment of any type including raking out joints, hacking for key, scrubbing down with water etc., to receive further treatment, complete all as specified land as directed.Note: The application shall be executed on any type of surface and on horizontal/Vertical areas.