MTPS I CA CWS I Strengthening and reconditioning of Stop Log gate 2 Nos in outlet canal of stage I cooling tower

Amount

Charges for loading of required MS materials from Central Stores to work spot and loading, transporting the scrap materials for devolution at Central stores.

Charges for Petty Iron Works for Reconditioning and fabrication of two nos of stop log gate by marking and cutting the 10mm thick MS plate, MS angle to the required size and welding the frame and stiffeners with MS plate.

Charges for Drilling holes of dia 10mm and making M10 thread by using tap set in MS plate of 10mm thickness and MS angle of size 100x100x6mm in the 2 nos of stop log gates.

Charges for fixing of new musical note rubber and flat rubber on the side wall of the stop log gates by punching holes of dia 10 mm and tightening with MS plate & MS angle using M10x50mm bolts. (1 set - 2 Nos)

Charges for cleaning & painting with epoxy red oxide primer and one coat of epoxy high build coal tar one over the other with proper interval on the stop log gate and its stiffeners.

Cost of Epoxy red oxide Primer For Sl.No.2

Cost of Coal Tar Black Paint For Sl.No.2

Cost of Epoxy Thinner For Sl.No.2

Cost of flat rubber width: 100mm, thickness: 25mm for Top & bottom portion of the stop log gate.

Cost of Musical note rubber bulb dia: 500mm, width: 100mm, thickness: 25mm for side portion of the stop log gate.

Cost of SS 317 bolt of size M10 x 50 mm with nut and two washers for Sl.No.4

Cost of welding electrode for Sl.No.2

Cost of cutting Gas for Sl.No.2.

Cost of Consumable and T&P For Sl.No.1to 5.

SS ENGINEERING CONTRACTOR (BID ID -1073823)