Loading…
Loading…
Tender Value
₹35.1 L
EMD Value
₹35,500
Closing Date
16 Mar 2026, 5:00 pmClosed
Superintending Engineer, MB Circle, Mahabubnagar
O/o Superintending Engineer, MB Circle Mahabubnagar, Kidwaipet, Opp: Police guest house, near Old Bus Stand Road, Mahabubnagar-509001
Laying of pipeline to provide bulk supply connection to Double Bedroom Housing Scheme Telangana at Dooskal (V) of Farooqnagar (M) Rangareddy District
683246
T4/Tenders/16/2025-26, Dated: 25-02-2026 of Mission Bhagiratha, Circle, Mahabubnagar
OPEN
Water Supply
RANGAREDDY
13 documents required · 13 mandatory
₹1,243
₹35,500
27 Feb 2026
27 Feb 2026
28 Feb 2026
Construction of pipelines for water supply with HDPE PE-100 grade pipes as per IS 4984:2016 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work, but excluding GST
Construction of pipelines for water supply with HDPE PE-100 grade pipes as per IS 4984:2016 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work, but excluding GST
Construction of pipelines for water supply with HDPE PE-100 grade pipes as per IS 4984:2016 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work, but excluding GST
Supply and delivery of single chamber DI Air valve of PN 1.6 rated with body and cover in Ductile Iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S 3896-Part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and out side colour blue, drilled as per IS:1538, with supply and delivery, laying true to alignment jointing with flanges of of PN 1.6 grade with body bonnet of Ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per IS.3896-Part2-1985 and sub sequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be vaccum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538, including supply of DI/MS Tee t suit the man hole cover with locking arrangements etc. complete for finished items of work but excluding GST.
Supply, Transportation and Installation of 3Hp / Three phase open well ISI submersible motor pumpset------------- Makes: Texmo / CRI / KSB / Aryan Varsha / Lubi / Falcon at 2 BHK Sumps THREE PHASE OPEN WELL SUBMERSIBLE PUMP SETS.
Supply and Transportation of control panel for three phase submersible motors up to 5 HP @ 415V 50Hz operating fitted with supply and fixing of Direct - on - Line LTLK /BCH/ SIEMENS / CROMPTON make, 0-500V Volt meter and 0-30A Ammeter, Indication lamps, selector switches, CTS, 32A TP MCB, Single phase preventor,suitable contactor to with stand low voltage pick up and high voltage resistant, with ISI marked capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete.
Supply, Transportation and fixing of -----------------------90 °C bend withlength of 20cm (Center to face) galvanised GI bends heavy duty with threaded at both ends for installing the pump set including cost and conveyance of all materials,taxes etc., complete. 50mm dia
Supply, Transportation and fixing of following MS threaded Flanges 2 Nos with nuts and bolts including cost and conveyance of all materials, taxes etc., complete.50mm dia MS flanges set (2 Nos) 150mm dia OD, 12mm thick each flange with required dia bolts and nuts.
Supply, Transportation and fixing of seamless cast iron adopter assembly (Two Nos at bottom of the pipe to coupling to the pump set and the other at top end of the pipes) for installing the pump set with pipes including cost and conveyance of all materials, taxes etc., complete. OD 60mm
Supply of 3 Core 4.0Sqmm - Flat Copper cable of ISI for Submersible Motors. Makes : Finolex / RR Kabel / Havells / KEI / LK (L&T) / Pawancab
Design, Supply, installation, testing & commissioning of Horizontal Split casing centrifugal pump motor set of specified duty parameters & guaranteed efficiency of following MOC with specified capacity, horizontal foot mounted TEFC squirrel cage induction motor, working on three phase AC supply with 50 Hz ± 3%, 415 V ± 10%, rated speed 1450 RPM along with fabricated MS base frame, coupling, coupling guard, foundation bolts etc. as per relevant IS. M.O.C.: Impeller & Wearing Rings: CF8M, Casing: Cast Steel WCB , Shaft: SS 410, Shaft Sleeve: SS 410, Mechanical Seal (above 30 kW), Base Frame: MS as per specifications . The prices are excluding 12% GST. Discharge of 543 LPM with Head - 36mts for Each Pump - 10HP (1+1) HSC Pumpset
Design, Supply, Installation, Testing, Commissioning of Diaphragm sealed Pressure Gauge, ±1% accuracy, Direct bottom 1/2" NPT (M) process connection, IP 67, Glycerine filled, SS304 Case with Bayonet Type Bezel, SS316 L Diaphragm, SS316 Bottom Housing Material, SS 316 Movement material, Aluminium dial with black graduation on white background, Micro Zero adjustable pointer, neoprene gasket, Blow out disc, shatter proof glass, SS tag plate etc as per IS 3624. 150 mm Dial Size, 0 to 21 Kg/cm2.
Supply and Run of 25mm x 6mm G.I Strip including cost of all accessories and labour charges etc. complete. (1.18Kgs1Mtr)(Data No. 141527.1.5)
UG cable mains Supply and run of 240 Sqmm 3.5 Core XLPE insulated 1100V grade armoured alluminium cable as per specification confirming to IS7098 (Part I) in exsting trenchwall including providing end terimations with glands. lugs crimping job etc complete for finished item of work.
Supply and run of 70 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) in exsting trench/wall including providing end terimations with glands. lugs , crimping job etc complete for finished item of work.
Supply, Transportation, and Installation of 150mm x 50mm x 2mm thick GI Ladder type cable tray along with required coupler plates, T's, Bends, Reducers, Anchor bolts, nuts, washers and slotted channels / Angle Iron Channels etc complete and the tray should be fitted on the wall / Ceiling etc. complete for finished item of work. (Makes: DEC/MNR/ H FAB or equivalent)
Supply, Transportation, and Installation of 300mm x 50mm x 2mm thick hot dip GI perforated cable tray without cover along with coupler plates, T's, Bends, Reducers, Anchor bolts, nuts, washers and slotted channels / Angle Iron Channels etc complete and the tray should be fitted on the wall / Ceiling etc. complete for finished item of work. (Makes: DEC/MNR/ H FAB or equivalent)
Supply installation testing and commissioning of 3 phase and neutral 415V free standing floor mounted MV panel made out of No.14/16 gauge CRCA sheet steel after 7 tank process and painting with powder coating. The panel shall consists of suitable rating TPN with suitable bus bars (with rating of 0.8A/ Sqmm) supported with DMC /SMC barriers and colour coaded with heat shrinkable sleeves. The metering shall be provided as specified. The panel shall have short-circuit with standing capacities of minimum 50KA and consists of switchgear as mentioned below.The panel shall be got manufactured from the manufacturers of CPRI test certificate only. The panel shall be mounting on U channels including supply and fixing including painting with powder coating including internal connections cost and conveyance of all materials & labour charges.
Providing supply delivery erection testing and commissioning of 150 mm dia. Dual plate DI check valves PN16 rated confirming to API 5946D including required SS nut boltsSBR gasketetc.
150mm dia PN 16 Providing Supply and delivery erection testing and commissioning of DI DF Butterfly Valves of following sizes with Equivalent grade as per I.S.3896part 2 double eccentrically Disc. with renewable soft seal on the disc and Body seat face of stainless steel nickel weld overlay with powder or liquid Epoxy coating with minimum thickness of 250 microns applied on both body and disc inside and outside. Face to face dimensions as per AWWA C 504 or BS 5155 or IS13095. Drilled as per IS1538ISO including required SS nut boitsSBR gasketetc. Valve shall be operated by electric actuator of suitable rating for smooth opening and closing of valve.
Providing supply delivery erection testing and commissioning of 150 mm dia. Dual plate DI check valves PN16 rated confirming to API 5946D including required SS nut boltsSBR gasketetc.
Supplying, installation, testing & commissioning equivalent make as desired by the department of Deluge valve with wet pilot trim (hydraulicrelease), electric release trim test and alarmtrip complete with all accessories, fittings,pressure guages, valves, actuator manifold etc.alarm gong including upstream anddownstream main header. The valve shall beUL listed / FM approved.Makes : HD / TYCO / NEWAGE or its equivalent make as desired by the department 150mm Dia
150MM dia Providing Supply and Delivery erection testing and commissioning of C I Dismantling Joints of following sizes with both side flange end suitable for installation in between flanged end pipes. Thickness as per IS 7322 including required SS nut boitsSBR gasketetc. for delivery sluice valve
Providing laying testing & Commissioning of MS pipes of 150 mm dia 8mm thick conforming to IS 3589 and 1239 including fittings like elbows tees flanges tapers nuts bolts gaskets etc. completeincluding providing & applying single coat Thickness 6mm
150MM dia Providing Supply and Delivery erection testing and commissioning of M.S. Dismantling Joints of following sizes with both side flange end suitable for installation in between flanged end pipes. Thickness as per IS 7322 including required SS nut boitsSBR gasketetc.
Providingsupplying & installing DI Kinetic Air Release Valve conforming to IS14845 with flanges as per IS 1538.Valve should be electrostatically powder coated from inside & outside.With CI resilient seated Isolatingglanded gate valve as per IS 14846 with rising spindle.The valves should be PN 1.6 rating. Size 100 mm dia.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Schedule.xlsx
TENDER_DOCUMENT • 0.11 MB
Vol-I Dooskal 2.doc
TENDER_DOCUMENT • 0.71 MB
Download all tender documents and submit your bid