BARC/TSD/15/2023-24 - Up-gradation of Civil and PH Works and Area Development in EBC Kharghar , Navi Mumbai

Amount

Removing flat back urinals system/ EWC/AIWC carefully along with the cast iron/ceramic/plastic flushing cistern including all its accesseries, items including removing bracket screws & existing C.P. fittings & stacking the same as directed by the Engineer-in-charge

Removing hand wash basin carefully alongwith bottle trap ,stop cock, pillar tap,brackets & PVC connections carefully & stacking the the same as directed in Civil Maint.Stores at TSH/NBH as directed by the Engineer-in-charge.

Surface dressing of the ground including removing vegetation and in equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m in all kinds of soil complete as per specifications and as directed by the Engineer-in-charge

Dismanteling plain cement concrete manually/by mechanical means carefully without damaging adjucent structures including disposal of debris within 200M lead as per direction of Engineer in charge.

Dismanteling of RCC works carefully manually without damaging adjucent structures excluding cutting of reinforcement including stacking of steel reinforcement bars and disposal of unserviceable materials within 100M lead as per direction of Engineer in charge.

DISMANTLING DOORS, WINDOWS & CLEAR STOREY WINDOWS (Steel or wood or aluminium) including shutters & chowkhats (frames), Architraves, holdfasts etc. complete and stacking within 100 mts. lead. as directed by the Engineer-in-charge

of area below 3 sq. m

of area beyond 3 sq. m

Dismantling G.I pipes of all diameter external work including excavation and refilling trenches after taking out pipes manually / by mechanical means including stacking of pipes within 100 m lead as directed by the Engineer-in-charge

Dismantling flushing cistern of any size including stacking of useful materials near the site and disposal of unserviceable materials within 100 m lead including cost of labour , scaffolding etc. all complete as directed by EIC.

DISMANTLING OLD PLASTER OR SKIRTING carefully, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100M lead as directed by the Engineer-in-charge.

Lead charges for lead exceeding 5 KM for every 1 KM or part thereof, by mechanical transport includinmg loading unloading, stacking / levelling etc. as directed by the Engineer-in-charge Note: The rates in respect of this Item is applicable for NET Quantities arrived at after making deduction for voids @ 20% in respect of Soil and 30% in respect of Debris from corresponding TRUCK Measurement.

Debris Beyond 5 km for every 1 KM or part thereof

Providing and fixing Rough Shahbad Stone of minimum 50 mm average thickness of size 600 X 600 mm (Approximate) over 150 mm thick (consolidated thickness) stone dust backing including setting in position in footpath to the required level and line Pointing with C.M 1:4 (using crushed sand). Joint shall be 20 to 25 mm wide including filling of joints with cement mortar and making grooves etc. complete as per the direction of Engineer-in-charge

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made with strong vibratory compaction and approved size, shape, design and make laid in required colour and pattern over and including 50 mm thick compacted bed of crushed sand, filling the joints with crushed sand etc. all complete as -per the direction of the Engineer-in-charge.

Labour charges for DISMANTLING EXISTING SHAHBAD STONE PAVEMENT OR PAVER BLOCK PAVEMENT in footpaths, in Plinth Protection etc. carefully without damaging and re-laying the same over a bed of stone grit 150mm consolidated thickness, to proper slope, including cutting the edges to proper lines and sunk pointing with Cement mortar 1:3 with 15mm x 10mm groove cross wire and longitudinally and curing etc. complete. (Grit to be provided by the Contractor)

Providing Structural steel work using angles, channels, joists and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge . Up to and including 300 mm Joists, 350 mm channels, and below sections Using materials manufactured confirming to IS: 2062. All test reports to be provided along with the supply of the materials. Notes : 1. Structural steel confirming to IS 2062 shall be supplied.2. Welding weights, connections, bolts and nuts shall not be measured for payment but the cost of which shall be deemed to have been included in the rates.3. Welding Electrodes manufactured by M/s. Advani Oerlicon / ESAB India & D& H of specified suitable grade only shall be used.4. Holes to be drilled only by Drilling machines and gas cutting of holes are not permitted .5. Rate inclusive of all consumables like GAS, welding electrodes and tools and tackles etc.

Providing, supplying, cutting, welding, fabricating, hoisting and fixing in position structural steel members like trusses, purlins, posts etc. using MS hollow / circular / square / rectangular tubular sections including appling a coat of Zinc chromate primer of approved make all as per specifications, drawings and as directed by the Engineer in charge Notes : 1. Structural steel confirming to IS 2062 shall be supplied.2. Welding weights, connections, bolts and nuts shall not be measured for payment but the cost of which shall be deemed to have been included in the rates.3. Welding Electrodes manufactured by M/s. Advani Oerlicon / ESAB India & D& H of specified suitable grade only shall be used.4. Holes to be drilled only by Drilling machines and gas cutting of holes are not permitted .5. Rate inclusive of all consumables like GAS, welding electrodes and tools and tackles etc.

Providing CEMENT SAND MORTAR 1:3, screed 20 mm thick,mixed with WATERPROOFING COMPOUND 2% by weight of cement, spread over existing siporex bat coba surface finished smooth, curing, etc. complete for obtaining required slopes. Note : Tentative / Suggested make for guidance of bidder(s) - M/s ACCOPROOF - WATERPROOFING COMPOUND

REPAINTING OF OLD PAINTED SURFACES with two coats of paint with premium plastic emulsion paint/ synthetic enamel paint of approved make to give an even shade over a coat of approved cement primer including preparing the surfaces, including removal of old paint, scraping if any, sand papering, entirely filling with acrylic wall putty and other cracks with repair mortar as required, including scaffolding & cleaning, cost of all materials, labour, all as per drawing, specifications and as directed by E-I-C. Note : Tentative / Suggested make for guidance of bidder(s) - M/s Roffe - Crack Seal/Repair mortar

Using PLASTIC EMULSION paint On plastered surface

Using SYNTHETIC ENAMEL paint On Wood/steel surfaces

Providing and Painting with Epoxy paint at all locations prepared and applied as per manufacturer' specifications including a priming coat if specified by the manufacturer , preparation of surface and etching with 10% commercial Hydrochloric acid wherever necessary and neutralizing the acid etched areas by washing with 5% solution of soda ash neatly and washing with sufficiant water, after first coat Epoxy based trowelling compound if required, including preparation of the surface by scrapping, applying sand paper, filling the holes, joints, cracks if any, etc. complete.all as per manufacturers Technical Data and as directed at site to acheive 200 micron dry film thickness (50 micron primer coat and 150 micron finishing coat).

Removing white or colour wash, distemper, external paint by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as directed at site including scaffolding, cleaning of the areas.

Providing and applying white cement based wall putty of approved make over concrete or Plastered surface up to 3 mm thick to get uniform surface free from undulation including cleaning complete all as directed by the Engineer-in-charge

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 of approved make. shade and colour of size ranging from 300 - 600 mm long and 300 mm - 600 mm wide and thickness not less than 6 mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.

Providing and fixing 1st quality ceramic glazed floor tiles of minimum 300 - 600 mm long and 300 - 600 mm wide and thickness not less than 6 mm conforming to IS 15622 of approved make in all colours and shades as approved by Engineer-in-charge over a bed of 20 mm thick bed of cement mortar 1:4 (using crushed sand) and jointing with grey cement slurry including pointing with white cement based Tile grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Enginner-in-charge

Providing and fixing 25 mm thick Colour PVC Integral Sheet door shutters flush door of approved colour, of approved make or equivalent, design, colour and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges, Fixing of Stoppers, tower bolts, baby latch, aldrop, handles etc.wherever required with S.S. screws (Stopper, Tower bolt, Baby latch, Aldrop, Handels etc Shall be supplied by department) etc. complete as per specifications and as directed by Engineer-in-charge. Note : The door should satisy the following technical parameters as under: 1. Density : 0.475 to 0.55 g/cc, 2. Hardness (Shore 'D'): min. 55, 3. Water absorption : max. 1 %, 4. Tensile strength : min. 13 MPa, 5. Elongation : min. 15 %, 6. Flextural Strength min. 30 MPa, 7. Compressive Strength at 10% Deformation : min. 3 MPa, 8. Vicat Softening Temperature: more than 75 Deg Celcius 9. Flammability: classification B : S3 : D0 (to be tested as per NF EN 13501-1 standard)

Providing and fixing viterious China wash basin of approved make and colour with C.I. brackets, 15 m C.P. brass pillar tap of approved make,15 mm x 600mm long PVC Inlet connection, 32 mm heavy quality C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge

White vitreous China wash basin size 550 x 400 mm/ 550 x 420 mm and equivalent sizes with single 15 mm C.P. brass pillar tap

Providing and fixing Indian water closet (Orissa pan) of approved make with 100 mm China ware P or S trap, One no. 10 litre High level or low level white PVC flushing cistern with flush pipe & bend with manually controlled device (handle lever) conforming to IS:7231, PVC 15 mm Inlet connection with all fittings and fixtures complete including all connection, embedding in position commissioning, cleaning etc. all as per drawings and specifications and as directed by the Engineer-in-charge.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm

Providing and fixing white vitreous china European type Water Closet with 'P' or 'S' Trap with solid seat and lid of approved make, 10 litre low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS:7231, flush bend, fixing EWC with C.P brass screws, 15 mm PVC heavy quality inlet connection of 450 mm long, including testing , commissioning & cleaning etc. complete all as per drawings and specifications and as directed by the Engineer-in-charge

E.W.C. pan in White colour with ISI marked white solid plastic seat and lid.

Providing and fixing white vitreous china flat back half stall urinal size 580 x 380 x350 mm / 610 mm Aquaseal model of approved make with approved make 32mm C.P flush value with standard flush pipe and C.P. brass spreaders, 32mm urinal waste coupling with dome grating and clamp etc. including making G.I water line connection complete as directed by the Engineer-in-charge Notes : 1. Only G.I. pipes will be paid under relevant Item. 2. For fixing flush valve 32 mm G.I water line provision to be made which will be paid under relevant Item .

Single half stall Urinal with C.P. brass flush Valve.

Providing and fixing Brass 15 mm C.P presstomatic series auto shut urinal flush cock of approved make and quality as directed by the Engineer-in-charge.

Providing and fixing C.P brass towel rail/rod of approved make 600 mm long complete fixed to walls with 30 mm CP brass screws with concealed fitting arrangement/ brackets all as directed by the Engineer-in-charge.

Providing and fixing PVC low level / high level flushing cistern 10 litre capacity of approved make in white colour with flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures etc. complete as per specifications and as directed by the Engineer-in-charge.

Providing & fixing approved type heavy duty liquid SOAP DISPENSER with S.S brackets, cap etc. fixed to wall with C.P. brass screws, & screwed on to wooden rawl plugs etc. complete. Note : Tentative / Suggested make for guidance of bidder(s) - M/s PERK / ESSCO

Providing and fixing STAINLESS STEEL mosquito proof wire mesh made from Stainless steel of grade 304/304L in aluminium windows, ventilators, shutters etc. with PVC / Neoprene gasket etc. complete including cost of wire mesh, neoprine gaskets, screws and other fitting materials comple as per the architectural drawings and directed by the Engineer-in-Charge (Cost of Aluminium snap beading shall be paid seperately under relevent item.)

S.S Mesh - (Mosquito net)- 0.50mm thick- 144 Apeture in Sq. Inch

Supplying C.P. Brass Foot operated Valve along with Swan neck Pillar Tap and two Nos. PVC connectors of approx. 0.90 m length each, of approved make and approved sample with necessary approved stainless-steel screw complete as per specifications and as directed by the Project Engineer, including transportation charges and delivery at site work, all taxes as applicable

Providing and fixing C.P brass bib cock of heavy quality of specified / approved make as per specifications and as directed by the Engineer-in-charge

15 mm dia bib cock of approved type and make .

Providing and fixing 15 mm C.P brass 2 in 1 bib cock and Angle cock combination of Heavy Quality of approved make as per specifications and as directed by the Engineer-in-charge

Providing and fixing heavy quality health faucet with 1.50 metres long flexible hose (hand shower) of approved make with wall brackets and type as per specifications and as directed by the Engineer-in-charge

Providing and fixing C.P brass Angle cock of heavy quality of specified / approved make, for wash basin inlet / flush cistern etc. as per specifications and as directed by the Engineer-in-charge

15 mm n.b CP brass Angle cock of approved make

Providing and fixing 125 mm dia. S.S./ C.I. Nahani trap Jali as directed by the Engineer-in-charge

Providing and fixing anodised aluminium baby latch of size 75 X 12 mm ISI marked of approved make transparent or dyed to requried colour or shade with necessary screws etc.

Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer of approved make with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts complete as per specifications and as directed by the Engineer-in-charge.

Providing and fixing following fittings as directed by EIC.

Providing and fixing ALUMINIUM HANDLES 175mm LONG INNER GRIP 125mm WITH 12mm DIA ROD PLATE TYPE BOW HANDLES ISI marked of approved make, anodised transparent or dyed to req. colour or shade with necessary screws etc. complete.

Providing and fixing pair of stainless steel "C" type door handles 10 mm dia, 250 mm long SS 304 grade solid rod , of specified size in steel doors/ wooden doors including screws / bolts etc. all as per drawings and specifications complete.

Providing and fixing stainless steel aldrops of size 300 X 14 mm of approved make with necessary screws, bolting from rear side complete as per specifications complete.

Providing and fixing 6 mm thick mirrors of size 600 x 450 mm of approved make with bevelled edges complete with 6 mm thick asbestos sheet back ground fixed to walls with C.P. brass screws and concealed washers complete. all as per specifications and as directed by the Engineer-in-charge .

Extra over for providing and fixing mirrors with stainless steel 304 grade STUDS (with wall spacers) complete all as per specifications and as directed by the Enginner-in-charge

Providing and fixing FRP door shutters flush door / panelled type with plain colour or wooden veneer finish of approved make, design & colour. made out of 1.5 mm thick FRP skin moulded over wooden frame work of 40 mm wide and required thickness wooden styles and minimum 100 mm wide lock rails and wooden blocks for door stoppers, tower bolts, baby latch, aldrop, handles etc. wherever required and core filled with Polyurethane Foam and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges with S.S. wood screws

35 mm thick panelled door type of approved colours including the cost of 100 mm ISI marked heavy quality stainless steel butt hinges with necessary screws.

Providing and fixing approved quality and shape star locks cum handle of approved make for sliding shutters

Providing and fixing approved quality stain less steel body or heavy duty pvc/ nylon roller wheels of approved make for sliding shutters

Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)

With clear float glass panes of 6.00 mm thickness

Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)

With frosted glass panes of 5.00 mm thickness

Providing and constructing brick work in cement mortar using Standard bricks of approved quality / class, make / brand in super structure above plinth up to Floor-II level in all shapes and sizes including curing, raking out joints complete as per specifications and as directed by the Engineer-in-charge

Brickwork in super structure with standard bricks in C.M 1:4 using crushed Sand

Providing 20 mm thick plastering using Ready mix external plastering compound of approved make for external faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning scaffolding up to 10 metres height complete.all as per specifications including forming drip moulds wherever necessary and as directed by the Engineer-in-charge

Providing, supplying and laying pre polished granite slab flooring / dado / Wall cladding with 15-17 mm thick granite slabs over 20 mm thick base cement mortar 1:4 (using crushed sand) laid and placed with grey cement slurry including filling the joints with matching white cement based tile grout complete all as per specifications and drawings.

Using approved black shade

Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately) Notes : 1) The rates for aluminium is inclusive of all fastners required for fabrication and fixing in the walls. 2) All joints shall be of mittered Joints 3) A long M.S rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom Horizontal members internally connecting Vertical members and fixed with M.S washers & nuts. 4) Only Aluminium members alone shall be measured and paid for.

Anodised Aluminium sections (Minimum anodizing thickness of 15 micron)

Extra for colour anodizing

Providing & Applying SEAMLESS ACRYLIC BASED CHEMICAL WATERPROOFING SYSTEM with minimum 1 mm DFT (Dry Film Thickness) including surface preparation as per general notes, primer coat, reinforcing membrane (minimum 45 GSM) and multiple layers of chemical coat (2 to 3 coats as per manufacture specification), removing the existing damaged water proofing treatment, if any, all complete as per the manufacturers specifications and as directed by Engineer-in-Charge, using Smartcare Damp Proof of M/s. Asian Paints all conforming to the following technical specifications or standard to satisfy the site requirements. Chemical properties: (i) Physical/chemical parameters such as specific gravity, solid contents, Tensile strength, viscosity etc. shall be tested as per relevant test method of IS/ASTM/DIN and shall conform to the approved manufactures product and specification. (ii) Elogation: 100% minimum (iii)UV Resistant: Continuous 500 hrs (min) as per ASTM D4587.

Over terrace slab, top of water tank and parapet etc. at all levels.

Providing and fixing double tubular scaffolding system using H- frames with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding .

Providng and fixing at and near ground level precast cement concrete 1:2:4 in kerbs, edgings etc. as per approved patterns and setting in position with C.M 1:3 (using crushed sand) including consolidation, curing, cost of required centering, shuttering, finishing smooth with 6 mm thick cement plaster 1:3 (using crushed sand) on exposed surfaces complete as per specifications and as directed by the Engineer-in-charge.

Providing and laying in position cement concrete of 1:2:4 (1 cement, 2 crushed sand, 4 graded stone aggregate of nominal size 20 mm) / M-15 with min cement content 320 Kg/m3 including consolidation, finishing, curing etc. complete as per specification and drawings but excluding the cost of Formwork shuttering, centering and steel reinforcement at all Levels

Providing and fixing in position Suspended false ceiling system using 600 x 600mm Calcium Silicate Ceiling tiles having 15mm densified edges and 100% humidity resistance, incombustible as per BS476 part IV with thermal conductivity of 0.043 w/m KC and approved surface design and edge profile (TEGULAR/ SPINTONE) placed in a suspended grid of size of 600 x 600mm made of hot-dipped G.I steel sections having an exposed surface capping of pre-finished baked polyester painted coil wherein the main tee of size 24mm x 38mm x 0.33mm shall be suspended at 1200 mm centres along the length of ceiling with 4mm dia G.I wire with necessary level adjusters and cross tees of size 24 x 28 x 0.33mm x 1200 mm shall be inserted in to slots between the main tees at 600mm centres and thereafter in direction vertical to the longer tees, cross tees of size 24 x 28 x 0.33mm x 600mm shall be inserted to form a grid size of 600 x 600 mm resting on the perifery walls on wall angles of size 20mm x 20mm x 3000 mm x 0.40 mm thickness. The rate shall include providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings. The work shall be carried out as per directions of Engineer-in-charge. The main tees to be suspended from the ceiling/ soffit with the help of matal dash fastners of 6mmx50mm, soffit clits of 25mmx35xxx1.60mm and 4mm dia G.I wire with galvanised spring steel levelling clips. the entire grid system shall be designed to bear a distributed load of minimum 15 kg/Sq.m (Only calcium silicate false ceiling area will be measured for the purpose of payment) Note : Tentative / Suggested make for guidance of bidder(s) - M/s AEROLITE ceiling systems Model : Cosmos / Spintone / Hexa / Quadra Models with micro look system

False Ceiling- tiles

Providing and fixing 12 mm thick pre-laminated particle board flat pressed 3 layer or graded wood particle board conforming to IS 12823 Grade-I, Type - II in panelling fixed in aluminium doors, windows, shutters and partition frames with C.P Brass / Stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge Prelaminated particle board with decorative lamination on both sides

Providing and fixing precoated Galvalume Roofing profile sheets of approved size, shape and pitch up to and including single length of 12.00 M. The sheet shall be fixed using self drilling / self tapping screws of size (5.5 X 55 mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete upto any pitch in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as directed by the Engineer-in-charge

Galvalume sheet roofing 0.50 mm Thickness in Single sheet

Providing & fixing in position heavy pattern screw down gun metal gate valve with handles and wheels of approved make including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge

Providing, laying , jointing, fixing and testing heavy quality ( (ISI Marked C-Class) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing teflon tape, chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint for all concealed lines / two coats of synthetic enamel paint for all exposed lines, all as directed by the Engineer-in-charge. Pipes with ISI marked 'C' -Class heavy quality pipes of approved make.

15 mm dia G.I pipe

20 mm dia G.I pipe

25 mm dia G.I pipe

32 mm dia G.I pipe

40 mm dia G.I pipe

Providing and injecting non cementitious grout in proportion recommended by the manufacturer into cracks/holes/gaps/honey-comb area of concrete of concrete/masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-charge. Note: The measurement will be made on the basis of actual weight of approved grout powder utilized for grouting.

Providing structural repairs in old damaged concrete structures / surfaces with approved Polymer with following operations 1) Removal of loose/Spalled or damaged concrete by chipping and cleaning the concrete surface and reinforcement steel with wire brush and with water 2) Cleaning the re bars with Acetone for complete rust removal and washing with water to make the surface clean. 3) Applying protective coat / bond coat using polymer and cement in the proportion of 1; 1.5 (1 part of polymer and 1.5 parts of cement in synthetic enamal paint like consistancy with brush 4) Reinstate the area with polymer modified mortar in layers of maximum 20 mm with the proportion of Cement 50 Kg : washed and dried river sand 87.50 kg ; silica sand 37.50 Kg. mixed with 10 litres of Polymer (or 1 Kg cement : 1.75 kg washed and dried river sand ; 0.75 Kg silica sand : 200 ml polymer) 5) If thickness of repair exceeds 20mm, after every 20 mm thick repair, bond coat as per 2 above to be applied and further thick of repair to be continued for each layer. This work is inclusive of all materials, labour, complete all as directed at site using polymer suitable for structural repair shall be used. Note: Scaffolding will be paid separately under relevant item.

Providing and painting walls with Two coats of approved shade of high build protective, elastomeric water proof exterior grade paint of approved make of required shade, minimum dry film thickness of 250 microns acheived in two or more coats / as per manudacturer's specifications including preparation of the surfaces by scrapping / wire brush , scaffolding complete. Primer coat will be with approved make with water in ratio of 1:2 and 2 coats of finishing coat without water all as directed by Engineer-in-charge.

Credit to the Department for removing scrapped items outside BARC as directed by the Engineer-in-charge. Aluminium Scrap

Providing and constructing Random Rubble masonry using approved Rubble stone in foundation and plinth in C.M 1:6 (using crushed sand) including raking out joints or simultaneous flush pointing below ground level / plinth level, curing etc. complete as per drawings and specifications.

Providing FLUSH pointing on stone masonry with cement moratr 1:3 using crushed sand as per specifications and as directed at site by the Engineer-in-charge

Painting road surface marking with Thermoplastic paint hot applied to give uniform finish with Glass beeds / power Topping, on bituminous surface in white / yellow shade including cleaning the surface of all dirt, scales, oil, grease and other foreign material etc complete as directed by the Engineer-in-charge

Thermoplastic paint on bitumen sufaces

Providing and fixing decorative high pressure 1.5 mm thick laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S including cost of adhesive, labour etc. complete as directed

Providing and fixing 12mm thk BWP marine on existing partition frame / wall / etc. with necessary hardware with 1mm laminate / veneer of approved shade / colour all complete as per architect's instructions & Detail Drawings and as directed by Engineer-in-Charge.

Providing wood work in frames of doors, windows, clear story openings and other frames, wrought framed and fixed in position of required size and shape including sawing, jointing,making rebates for shutters, making grooves as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 40 mm X 3 mm thick, 200 mm long / with coach screws including protective painting to the suface that will come in contact with walls, joining materials, labour etc. complete all as per specifications and as directed by the Engineer-in-charge

Second class teak wood

Meena Enterprises

MARUTI ENTERPRISES

ANS Constructions.com