Repair and maintenance of Mini power pump and supply of submersible motor to mini power pump in Tiruvarur Municipality.

Charges for developing the borewells with air compressor of 300 CFM capacity (minimum 8 Hours)including transportation labour and fuel charges for compressor as directed by the departmental officers and conducting yield test by "V" notch method etc., complete as per standard specifications.

Supply and delivery and fixing of HDPE tank as per IS12701/1996 including loading ,unloading ,transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc

1000 Liter

Supply and delivery and fixing of HDPE tank as per IS12701/1996 including loading ,unloading ,transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc

32mm dia,UPVC Column pipe

20mm dia.UPVC pipe

20mm dia UPVC Elbow

20mm dia UPVC Tee

20mm dia UPVC Union

25x20 Reducer Elbow

20x15 Reducer Elbow

25x20 Reducer Tee

20x15 Reducer Tee

20mm dia UPVC Ball Valve

20mm PVC Tap

2.50 sq.mm Flat copper cable (Twad P.No.116)

1 HP single phase Starter (Twad P.No.111)

50 MFT condenser

65mm" GI Fork Clamp

2 pole main switch 16 A

16 Amps fuse unit

100 uf condenser

50 uf capacitor

15 Amps MCB

20 A Double Pole

Double Pole 16A MCB

Double Pole 20A MCB

200/250 uf cabasitor

20Amps MCB Switch

3/4" Non Pressure Valve

63 Amps Triple Pole MCB Switch

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mmdia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains ( SD - 363)

Supply and delivery of clear water vertical wet type 1 Hp submersible pump conforming to IS 8034/2002 and as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor suitable for operation in AC single phase 230 V+/- 10 %,50 HZ +/-5 % (20x80 -LPM x m) (WD-M1594)

Supply and delivery of direct online 1 Hp starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/single Phase/50HZ(± 5%) and 230 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately).WD-M1905

Labour charges for erection of submersible pump set upto3 HP in borewell / open well including fixing and jointing the submersible cable with proper clamps upto the starter to the required depth and also fixing or riser pipes to the required depth and also fixing of riser pipes to the required depth, valves, erection clamps, pressure gauges upto the exterior wall of the pump room and erection of panel board consisting of TPICN switch starter, voltmeter, Ammeter three pilot indicating lamps capacitor single phasing preventing water level guard laying and jointing the cables, and twin earthing as per I.E. rules, etc., complete and testing the pumpset on trial run as directed by departmental officers.(Up to 5 HP) WD-W0871

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand,silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering, and baling out water wherever necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and completed depositing the surplus excavated soil with in the compound in places shown by the departmental officers with intial lead and lifts and cleaning and levelling the site etc.,complete

Cement Concrete 1:4:8 mix (One cement four sand and eight metal) using 40mm ISS HBG metal including cost and conveyance of all materials and labour etc complete as per standard specifications.

Supplying fabricating and placing in position of MS/RTS rods including cutting, bending into shape, tying and placing the grill in position including cost of binding wire including cost and conveyance of all materials and labour etc., complete as per standard specifications

Providing and laying in position Standardised Concrete Mix M-30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 400Kg/ cum and maximum water cement ratio of 0.45 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards.

Brickwork in Cement Mortor 1:5 (One cement five sand) mix using country burnt of standard size 8 3/4"x4 1/4"x2 1/4" including cost and conveyance of all materials and labour etc complete as per standard specifications

Dadooing walls with ceramic tiles of sizes 300mm X 450mm X 8mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Plastering with cement mortar 1:5(One cement and five sand) 12mm thick in all floors including cost and conveyance of all materials from an approved quarry to site and including all labour charges for finishing ,curring etc,complete as per standard specifications

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Please Enable Macros to View BoQ information