Construction of Girls Common Room with attached Washroom under PM-USHA 2025-2026 (Gender Inclusion and Equity Initiatives) at S.S. Gourgobind Girls College, Imphal East, Manipur

Amount

SH: Construction of Girls' Common Room

Earth work in excavation by mechanical means (Hydraulic Excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

a) All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Supplying and filling in plinth with sandy soil under floors including, watering,ramming consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level.

a) 1 : 4: 8( 1 cement : 4 c/sand : 8 graded stone aggregate. 40mm. nominal size).

b) 1:3:6 ( 1 Cement: 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

c) 1:2:4 ( 1 Cement: 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level :

a) 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level upto floor five level excluding cost of centering,shuttering, finishing and reinforcement :

a) 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with

a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level.

a) Thermo-Mechanically Treated bars.

Centering and shuttering including strutting, propping etc. and removal of form for:

a) Foundations, footings, bases of columns, etc. for mass concrete.

b) Columns, Pillars, Piers, Abutments, Posts and Struts.

c) Lintels, beams, plinth beams, girders, bressumers and cantilevers.

d) Suspended floors, roofs landing balconies and access platform with water proof ply 12mm thick.

Brick work with Ist class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in..Cement mortar 1 : 4 (1 cement : 4 coarse sand).

Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately :

a) Local best quality Tolhao wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.

a) Local Best quality Tolhao wood 35 mm thick shutters.

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :

Providing and fixing ISI marked oxidised M.S.sliding door bolts with screws etc. complete

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10 x 15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Fixed to steel windows by welding.

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete.

a) Hot finished welded type tubes

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with.

a) Precoated galvanised iron profile sheets 0.35 mm thick.

Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete: Ridges plain (500-600).

a) Precoated galvanised iron profile sheets 0.35 mm thick.

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.

a) 40mm thick with 20mm nominal size stone aggregate.

12 mm cement plaster of mix: 1:4 (1 cement : 4 fine sand).

15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the roughside of single or half brick wall.

With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture

Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade.

New work (two or more coats) over and including priming coat with cement primer:-

SH: Providing WS & SI

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

a) 100mm nominal outer dia Pipes (External work)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

a) 50 mm nominal outer dia Pipes (Internal work - Exposed on wall)

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:

a) White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :

a) Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-

a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass

Providing and fixing toilet paper holder:

a) C.P. brass

Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete

a) 10 litre (full flush) capacity-white

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.

a) 15 mm nominal outer dia Pipes (Internal work)

b) 40mm dia nominal bore (External work)

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

a) 15 mm nominal bore

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

a) 40 mm dia

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

SH: Providing IEI

Wiring for light point/Fan point/Exhaust Fan point/Call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in PVC casing and caping with modular type switch modular plate size G.I box and earthing the point with 1.5mm2 PVC insulated copper conductor single core cable

a) Group A

b) Group B

c) Group C

Wiring for light power plug pt. with 2 x 4 mm 2 PVC insulated copper s/c cable in PVC casing capping along with 1 no. 4 mm 2 PVC insulated copper cond S/C cable for loop earthing etc. as reqd.

Wiring power plug with 2 x 6 mm2 FR, PVC insulated copper conductor single core cable in PVC casing and caping along with 1 no. of 6 mm2 FR, PVC insulated copper conductor single core cable for loop earthing etc.

Wiring for circuit sub aim wiring along with earth wire with (the following size) of PVC insulated copper conductor single core cable in PVC casing and capping as reqd.

1) 2 x 1.5mm2 + 1 x 1.5 mm2 earth wire

2) 2 x 4 mm2 + 1 x 4 mm2 earth wire

3) 2 x 6 mm2 + 1 x 6 mm2 earth wire

S/F 63 amp double pole 240 V isolater in the existing MCB DB complete with connection testing & commissioning as reqd.

S/F 5 amp to 32 amp rating 230 V B series MCB for lightning and other load for (following poles) in the existing MCB DB complete with connection testing and commissioning etc. as reqd.

Single pole and neutral

S/F (following modular type switch/sockets) on the existing mudular plate and switch box i/c connection but excluding modular plate etc. as reqd.

1) 3 pin 5/6 amp switch outlet

2) 5/6 amp switch

3) 6 pin 15/16 amp sockets

4) 15/16 amp sockets

S/F brass battern/angle holder i/c connection etc. as reqd.

S/F CFI bulk head luminaries deep down annodised A1 body heat resistant prismatic glass cover. (Ref 021240, BIBE - 19, S - type CFL, 1 x 9W)

S/F 48" sweep (1200mm) A.C. ceiling fan complete with sown rod, canopy, 3(three) blades but without regular etc. as reqd. (Make Bajaj/Usha or similar)

S/F stepped type electronic fan regulator on the existing modular plate switch box i/c connection but excluding modular plate etc. as reqd.

S/F (following rating) double pole 240 V isolator in the existing MCB DB complete with conneciton, testing and commissioning as reqd.

10 sq. mm ISI marked FR PVC insulated, single core copper conductor cable

S/F of metal Boxes with phenoloc laminated sheet cover in front.

(i) 180mm x 100mm x 60mm deep

(ii) 250mm x 300mm x 60mm deep

(ii) 250mm x 300mm x 100mm deep

Earthing with GI earth pipes 4.5m long 40mm dia i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) as reqd.

Extra for using salt and charcoal for pipe earth electrode as reqd,

P/L earth connection from earth electrode with 4mm dia copper wire in 15 mm dia G.I. pipe as reqd.

100 amp/63 amp 500 V procelain fuse unit (kit kat)

S/F Bus bar chamber with 4 strips copper bus bar of length 300mm suitable for 100 amo capacity complete with all accessories i/c connection earthing the body etc as reqd.

S/F 305mm sweep exhaust fan complete with all accessories i/c connection etc. as reqd.

S/F 15 W LED Bulb Hevells

NINGTHOUJAM BIMOL (BID ID -10374)

Awungshi Aring (BID ID -10377)