Renovation of TF at Site-1 Yelahanka, Bangalore

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: Of area 3 sq. metres and below

Dismantling tile work in floors and dados laid in cement mortar including stacking materials within 50 meters lead : for thickness of tiles 10mm to 25 mm

Providing and laying double charged polished finish Vitrified tiles of size 600x600x 10 mm thick in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

Supplying and laying approved make and shade anti skid ceramic tile of thickness upto 6mm and size 300 x 300mm for flooring laid on 20 mm thick cement mortar 1:4 jointing with grey cement slurry @ 3.30 kg/Sqm, including curing and pointings with white cement and matching pigment etc., Complete all as directed by the Engineer-in-Charge

Providing and fixing 1st quality ceramic glazed wall tiles of size 300x450x7mm thick conforming to IS 15622 (thickness to be specified by the manufacturer), of approved make in all colours shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.30kgs per sqm , including pointing in white cement with mixed pigment of matching shade complete

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red

18 mm thick cement plastering on external surfaces of brick or concrete surfaces in two layers of 6 mm thick cement mortar 1:3 ( 1 cement 3 fine sand ) top coat mixed with integral water proofing compound over a base coat 12 mm thick cement mortar 1:5 (1 cement : 5 coarse sand), finished sand face etc; complete at all levels and locations.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing and fixing 2nd class teak wood panelled or panelled and glazed shutters 30 mm thick for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately)

Providing and fixing the following hardware fittings of approved make.

a) ISI marked oxidised MS pressed butt hinges with necessary screws etc., complete.

i) 100x58x1.9 mm

ii) 125x65x2.12mm

b) Aluminium handles, powder coated, ISI marked to required colour or shade with necessary screws etc., complete. - 125 mm

c) Powder coated ISI marked tower bolt to required colour or shade with necessary screws etc., complete.for following sizes.

ii) 150x10mm

d) Aluminium hanging floor door stopper ISI marked powder coated to required colour or shade with necessary screws etc., complete.

i) Twin rubber stopper

e) Providing & fixing Aldrop 300mm long with 16mm dia rod, required colour or shade with necessary screws etc., complete

f) Brass CP mortice lock six levers handles of Godrej / Dorset or equivalent make with necessary screws etc., complete for single door.

g) Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

Providing and fixing 30 mm thick Fiber glass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.

Removing the all kinds of sanitary fittings like EWC, Urinals,Wash hand basins including stacking of items within 50 meters lead as per direction of Engineer-in-Charge

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.

Providing and fixing toilet paper holder : C.P. brass 15mm dia

Supplying & fixing in position best quality & approved make C P soap container necessary including C P screws and washers fixed to wall etc., complete all as specified and directed.

Supplying and fixing in position cast iron Nahani traps with CP grating including connection with CI waste pipe including 150mm dia thick CC 1:2:4, for embedding the trap, plastering curing etc.,complete all as specified and directed.

Supplying and fixing of CP Health faucet of Parryware or equivalent make with 8mm dia and flexible tube wall hook, and angular stop cock etc., complete.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

Providing and fixing CP Brass Single lever telephonic wall mixer 15 mm dia of quality & make as approved by Engineer in charge.

Providing and fixing in position best quality of approved make 15mm CP brass stop cock for geysers with necessary screws etc.complete.

Supplying and fixing in position best quality and approved make heavy quality screws down gun metal gate valves with hand wheel of the following sizes fixed to service lines including testing, making good the leakages, if any etc.,

Supplying and fixing in position best quality CP towel rod of length 600mm long with a pair of brackets flanges fixed to wall with necessary plugs screws , washers etc., complete.

Providing and fixing Towel Ring circular of Parryware 215 mm dia, with minimum distances of 3 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms

Providing and fixing brass curtain rods of 25 mm diameter wall thickness 1.25 mm with two brackets fixed with brass screws and wooden plugs etc; wherever necessary complete

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm With second class teak wood beading 62X19 mm all complete.

SCHEDULE OF CREDIT

Unservicable doors and windows area not exceeding 3.0 sqm each including chowkhats/frame.

Dismantling tile work in floors and dados laid in cement mortar including stacking materials within 50 meters lead : for thickness of tiles 10mm to 25 mm.

Removing the all kinds of sanitary fittings like EWC, Urinals,Wash hand basins, towel rail, soap dish, health faucet, pillar tap stop cock, bib taps, wall mixer, shover etc including stacking of items within 50 meters lead as per direction of Engineer-in-Charge.

PUNDER CONSTRUCTION ENGINEER (BID ID -3147939)

SRI LAKSHMI CONSTRUCTIONS (BID ID -3144630)

M.R. ENTERPRISES (BID ID -3149009)