SPECIAL REPAIR TO BUILDING NO. P-3 AND P-24 (ANIMAL FACILITY) AT OLD CAMPUS DRDE GWALIOR UNDER GE I RND DELHI

Amount

Taking down chowkats or frames exc 1.5 sqm but not exceeding 4 sqm each without taking off shutters from the frames complete all as specified and directed.

All as per item No.1.00 above but not exceeding 1.5 sqm.

Taking down shutter of any description exc 1 sqm but not exc 2 sqm each complete all as specified and directed.

Demolition of brick work built in cement mortar complete all as specified and directed.

Complete removal of existing roof treatment of any description and thickness complete, including removal of debris out of MoD land complete all as specified and directed.

Demolition of cement concrete unreinforced in roofs, floors, beams etc complete and removing debris out of MoD land complete all as specified and directed.

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing rubbish off the premises & removal of debris out of MoD land complete all as specified and directed.

Dismantling of ceiling board (Plup insulation or insulation etc) or insulation board any thickness including cover fillet complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Dismaltling water tanks and remove to store not exc 500 capacity complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) complete all as specified and directed.

Taking down AC rain water/PVC pipe (any size pattern) including all fittings, including complete all as specified and directed.

S&F mild steel flat iron hold fast complete all as specified and directed.

M&L preparing surfaces and treating backs of chowkats area tarred exc 0.1 sqm but nexc 0.5 sqm each complete all as specified and directed.

S&F 2nd class hard wood plain solid straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F partly pannelled and glazed or gauged shutters 35mm thick 2nd class HW, divided into squares with plain, chamfered or rounded, mitred and ribated with sash bars any numbers, provided with stiles and rails, sizes, members of shutters as specified in SSR Part I, Sec 8, clause 8.24(a) complete all as specified and directed.

S&F 35mm thick factory made plain framed panelled shutter (two panel) hard wood, with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F glazed and skeleton shutters 30mm thick 2nd class HW open rebated to receive glass gauge etc (with or without sash bars) fitted with cut and mitred beads for securing glass etc provided with stiles and rails, sizes, members of shutters as specified in SSR Part I, Sec 8, clause 8.20(b) complete all as specified and directed.

S&F PVC door frame of size 50mm x 47mm made out of 5 mm plain PVC sheet reinforced with MS tube complete all as specified and directed.

Supply & fix factory made solid PVC door shutter of 30mm thick(style) with 2,4 or 6 raised panel design with 2mm thick PVC moulded sheet on the front face and 2mm plain colour PVC sheet on back face complete all as specified and directed.

S&F butt hinges 100mm long mild steel medium weight complete all as specified and directed.

S&F Stainless Steel wire mesh, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staple wires complete all as specified and directed

S&F in repair Stainless Steel wire mesh, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staple wires complete complete all as specified and directed.

S&F aluminium tower bolt 150 mm long of anodised section complete all as specified and directed.

S&F Anodised aluminium alloy handles cast type, each 150mm long complete all as specified and directed.

S&F aluminium alloy anodized sliding door bolt 300mm long with hasp and staple fixing clips etc complete all as specified and directed.

S&F in repair of aluminium section to be used in door/sliding window frame and shutter including fabrication of frame/shutters and fixing to wall with necessary lugs, cleat etc including all accessories such as glazing clips and rubber beading for fixing of glass panes hinges etc complete all as specified and directed. Note : Glass panes will be measured and paid seperately

S&F sheet glass 5.50 mm thick ordinary quality in square n.exc 1.00 sqm in each pane and fixed with neoprene/rubber beads complete all as specified and directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25mm thick alluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part made of steel heavy duty and fixed in position complete all as specified and directed.

M&L Prelaminated particle board 9 mm thick exterior grade, prelaminated on both side with decorative choice fixed in position complete all as specified & directed

S&F Brass Mortice Lock 4 lever, vertical type, 100mm size fixed in position complete all as specified and directed.

S&F Aluminium anodised 100mm dia handle fixed in position complete all as specified and directed.

M&L Brick work with sub class 'B' brick straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

Cutting out cracks to V-section in existing roof or terracing,cleaning out, and filling solidly with a hot mixture of bitumen and clean dry sand 1:1(by weight) complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (using 12.50mm gradded crushed stone aggregate) as in roof padding, bed plates or mass concrete complete all as specifide and directed.

M&L for 10mm thick screed bed in CM 1:4 mixed with liquid water proofing compound @ 0.20 ltr per bag of cement over brushing neat cement slurry with 3.0 Kg of cement per sqm complete all as specified and directed. Note: WPC shall be measured and paid separetely.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for preparing RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particle and applying APP modified bituminous water proofing membrane with polyester reinforcement and plain finish of 3 mm thick (not less than 3.8 kg ± 5% per sqm) consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25° C, 0.87-0.89 kg/ litre and viscosity 70-160 cps over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc. and including applying bituminous aluminium paint on top after preparing the surface complete all as specified and as directed.

Taking down all loose plaster and concrete if any in RCC Columns, chajjas, beams, slabs or any other type of RCC members removing all loose rust/scale from reinforcement etc. by using wire brushes, sand paper or any other chemicals, applying one coat of epoxy coating on old reinforcement, tying IRC fabric of size 75x75 mm of 3mm dia and binding with mild steel wire annealed with existing reinforcement and applyig cement slurry uniformly to exposed surfaces and gunninting using CM 1:3 average thickness of gunniting not less than 30mm and finishing the surfaces with 10mm thick rendering in CM 1:4 finished even and smooth without using extra cement and removing the debris out side of MD land.

M&L Granite ( of any type ) 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over 15mm thick screed bed in CM 1:4 in including rubbing and polishing complete all as specified and directed

M&L for rendering 15mm thick on wall and concrete surfaces in cement mortor 1:4, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 and applying two coat of plastic emulsion paint over and including a coat of primer complete all as specified and directed.

M&L Rendering 5mm thick on fair faces of bricks or concrete in ceiling in CM 1:3 and applying three coat of white wash complete all as specified and directed.

M&L preparing old plastered surfaces and applying one coat white wash on ceilings including preparation of old surfaces complete all as specified and directed.

M&L complete removal of existing treatement of walls any description over 10cm width or girth and applying two coat plastic emulsion paint over one coat of peimer over two coat of wall care putty 1mm thick each coat of approved make to achive smooth surface complete all as specified and directed.

M&L Complete removal of existing treatment of wall and finishing the surface with two coats 1mm thick each coat of wall care putty to receive the smooth surface and applying two coats of exterior weather proof paint over a coat of Alkali resitant exterior wall primer complete all as specified and directed.

M&L preparation of new plastered surface of wall and finishing the surface with two coats wall care putty to receive the smooth surface and applying two coats of exterior weather proof paint over a coat of Alkali resitant exterior wall primer all as specified and as directed.

M&L preparing new wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for prepartion of old painted wood or wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint all as secified and as directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint all as Specified and as directed.

M&L for glazed ceramic coloured tiles of size 450x350x7mm thick set and jointed in neat cement slurry and pointed in coloured cement over and including 10mm thick rendering in CM 1:4 as in skirting/dado all as specified.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 15mm thick screed bed in CM 1:6 including rubbing and polishing complete all as specified and directed.

M&L for non skid coloured joint free tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L coloured fully vitrified tiles 10mm thick (Square/rectangular) polished area of each tiles n.exc 0.36 Sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles including 15mm thick screed bed in CM 1:6 complete all as specified and directed..

M&L for providing cement concrete type C-2, 1:3:6 (40mm graded stone aggregate), 75mm thick.in sub base complete all as specified & directed..

M&L machine pressed precast concrete interlocking paver block any shape and size glossy finish confirming to IS 15658 - 2006 of 60 mm thickness, M- 35 grade with grey cement and pigment including 40 mm thick sand cushioning layer complete all as directed and specified.

M&L providing cement concrete in coping /sides of interlocking cement concrete tiles type B-1 (1:2:4) 20mm graded stone aggregat incl form work complete all as specified and directed.

M & L Aluminium Anodised snap grid frame work for false ceiling size 605 x 605 mm complete including hangers 6 mm dia GI suspenders,expansion hold fasteners 12.5mm dia, fixed to timber frame work complete all as specified and directed.

M&L PVC coated gypsum ceiling board / tiles for insulation and accoustic purpose 60x60cmx10mm thick in size fixed in position complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated/semi corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F in repair rotational moulded polythylene water storage tank capacity 1000ltr cylendrical vertical with closed top,tripple layer wall construction hoisted and fixed in position complete all as specified and directed.

M&L for Grinding and polishing floors and verticle surfaces (terrazzo,marble, kota stone etc) and treating the surface with beeswax polish.

S&F in repair 15mm bore galvanised water tubing medium grade with all fittings complete fixed to wall and ceiling or laid in floor all as specified & directed.

S&F in repair 20mm bore galvanised water tubing mediam grade with all fitting complete fixed to wall and ceiling or laid in floors all as specified & directed

S&F in repair 25mm bore galvanised water tubing mediam grade with all fittings complete fixed to wall and ceiling or laid in floors all as specified & directed.

S&F in repairs gate valves cast copper alloy screwed down, high pressure with crutch or butterfly handle,scrwed both ends for iron pipe of 20mm bore complete all as specified and directed.

S&F in repair gate valves cast copper alloy screwed down, high pressure with crutch or butterfly handle,scrwed both ends for iron pipe of 25mm bore complete all as specified and directed.

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed of 20mm dia complete all as specified and directed.

S&F fancy type bib taps cast copper alloy chromium plated with fancy handle screwed down or iron pipe for brass ferrule (15mm bore) fixed in repairs complete all as specified and directed.

S&F in repair brass chromium plated angle valve high pressure screwed for iron pipe and fixed, 15mm bore of pipe complete all as specified and as directed.

S & F wash hand basin,oval type, vitreous china ware white of 550 x 400mm size including bracket, PVC waste pipe, PVC connection, CP waste couping fixed in repair complete all as specified and directed.

S & F in repairs pillar tap of 15 mm dia, chromium plated fancy type, screwed for iron pipes complete all as specified and directed.

S&F in repair PVC connection with brass socket on both side 45cm to 60cm for 15mm dia pipe complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches with PVC clamp and GI screws complete all as specified and as directed.

S&F 110mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F PVC (SWR) Single 'T' equal or unequal 110 mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius, 110mm dia complete all as specified and directed.

S&F in repair PVC flushing cistern 10 ltrs and flush pipe syphonic action type low level with inlet ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair wash down water closet pedestal pattern / vitreous china wash down water closet pan, white excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F in repair viterous china IWC squatting pan " Orissa pattern" size 580 x 440 mm white with itegral foot rest incl 'P' or 'S' Trap ( Excluding flushing cistern) and connecting to out let and flush pipe complete all as specified and directed.

S&F in repair plastic water closet seat, white colour closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply and fixing in repairs of soap-dish chromium plated complete all as specified and directed

S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm long fixed with two plugs (Gutties) of 2nd class hard wood embeded in cement mortor 1:3 with MS screws complete all as specified.

S&F in repairs toilet paper holder vitreous china complete all as specified and directed.

S&F in repair vitreous china urinal Half stall type white including flushing cistern, flush pipe and waste pipe all fiting for urinal complete all as specified and directed..

S&F in repairs creamic lab sink white colour of size 45 x 30 x 15 cm of including waste cuplings and waste pipes complete all as specified and directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part made of steel heavy duty and fixed in position complete all as specified and directed.

S&F in repairs floor door stopper, 150mm in length of aluminium alloy body tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed

Taking down and refixing of auminium door shutter after renewal of un serviciable parts such as aluminium fillets rubber beading , aluminium mongrey and tightening of nuts and bolts and edging or cutting of door easy to open and closed etc complete all as specified and directed.

Taking down and refixing of auminium windows glass after renewal of un serviciable parts such as aluminium fillets rubber beading , aluminium mongrey and tightening of nuts and bolts and edging or cutting etc complete all as specified and directed.

S&F in repair Aluminium (extruded section) body door closer hydraulically regulated, designation No.3, universal type, suitable for door shutter of 851 to 1000mm in width complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light, fan, light socket or power socket) complete, including fixture and fittings such as switches ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good disturbed surface of walls, floors etc.complete all as specified and directed

M&L for Point wiring with FRLS insulated and unsheathed multistranded copper conductor single core cable, 1100 volts grade (ISI marked) of size 1.5 Sq mm drawing into PVC conduit 20mm dia concealed type medium grade ISI marked terminating in modular metal flush box for one light/fan point/ bell point controlled by one switch including provision of 1.5 Sq mm FRLS insulated unsheathed copper conductor cable, multistranded single core as earth wire to common earth & connecting to earth dolly complete all as specified and directed. Note: Rate are inclusive cutting chases of brick and making good to disturbed surfaces when ever required.

All as per ser item No. 97.00 above but with one 5 pin socket outlet 5 amps on independent board.

All as per ser item No. 97.00 above but with one 5 pin socket outlet 5 amps on the same board with other switches.

All same as per serial item No.97.00 above but controlled by 2 way switch

M&L Point wiring with FRLS insulated and unsheathed multistranded copper conductor cable, 1100 volts grade (ISI marked)of size 2.5 Sq mm drawing into PVC conduit 20mm dia, concealed type medium grade ISI marked terminating in modular metal flush box for one switch socket 15 amp point controlled by one switch including provision of 2.5 Sq mm FRLS insulated unsheathed copper conductor cable, multistranded single core as earth wire to common earth & connecting to earth dolly complete all as specified and directed. Note: Rate are inclusive cutting chases of brick and making good to disturbed surfaces where ever required.

S&F Modular switch 1 way 6 Amp, 1 module AC 230 volts complete all as specified.

S&F Modular switch 2 way 6 Amp, 1 module AC 230 volts complete all as specified.

S&F Modular switch 1 way 16 Amp, 1 module AC 230 volts complete all as specified.

S&F Modular Socket 6 Amp ,2/3 pin combined 2 module AC 230 volts complete all as specified.

S&F Modular Socket 6 A / 16 A ,6 pin combined 2 module AC 230 volts complete all as specified.

S&F ceiling rose 65 x 50mm 3 terminal AC 230 volt complete all as specified.

S&F Modular step fan regulator, electronic type 120 watt , 2 module AC 230 volts suitable for 1200mm/ 1400mm sweep ceiling fan, hum free complete all as specified and directed.

S&F Modular white cover plate with metal flush box with 2 module

S&F Modular white cover plate with metal flush box with 3 module

S&F Modular white cover plate with metal flush box with 4 module

S&F Modular white cover plate with metal flush box with 8 module

M&L for Sub main wiring / metal socket wiring with colour coding 4 single core PVC insulated FRLS cable 6 sqmm (Nominal dia) copper conductor multistrand and drawing in existing surface/ concealed conduit including 2*6 sqmm multistrand copper conductor FRLS green unsheathed cablefor earth continuity including taking down complete all as specified.

M&L Sub main wiring / metal socket wiring with colour coding 2 single core PVC insulated cable 4 sqmm (Nominal dia) copper conductor multistrand and drawing in and including concealed PVC conduit 25mm dia including 4 sqmm multistrand copper conductor PVC green unsheathed cablefor earth continuity including taking down complete all as specified and directed.

S&F in repair of sheet metal enclosures Single pole and neutral with two pin earth plug and socket with plug top including Single pole MCB 20 Amps complete all as specified and directed.

S&F in repair of sheet metal enclosures Triple pole and neutral with three pin earth plug and socket with plug top including triple pole MCB 32 Amps complete all as specified and directed.

S&F in repair of sheet metal enclosures double door for DBs when MCB used in 12 way, 230 Volts complete all as specified and directed.

S&F in repair of sheet metal enclosures double door for DBs when MCB used in 8 way, 230 Volts complete all asspecified.

S&F in repair MCB SP 6 to 32 Amps 10 KA all as specified. Make:- Havells cat part no.DHMGCSPF006-032 or equivalent approved

S&F in repair MCB SPN 40 Amps 10 KA all as specified. Make :- Havells cat part no.DHMGCSNF040 or equivalent approved make.

S&F in repair MCB TP 32 Amps 10 KA all as specified. Make :- Havells cat part no.DHMGCTPF006-032 or equivalent approved Make.

S&F in repair MCB TPN 63 Amps 10 KA all as specified. Make :- Havells cat part no.DHMGCTNF063 or equivalent approved

S&F in repair of sheet metal enclosures for DBs when MCB to used TPN 4 way double door powder coated, 415 Volts, provision for four pole MCB /isolator /RCCB as incommer ands SP/DP MCBs as outgoing fixed on wall/metal board/ wooden board all as specified.

S&F in repair Sheet metal enclosure TPN DBs DPX 160 MCCB DBs 4 Way 415 Volts , vertical double door type powder coated with busbar neutral link earth rail & din rail, ISI marked for incorporation of MCB/ ISOLATOR/ RCB etc. testing & commissioning complete all as specified. Make:- Havells cat part no.DHDLVDRWGOFO04 or equivalent approved make.

S&F in repair Sheet metal enclosure TPN DBs DPX 160 MCCB DBs 8 Way 415 Volts , vertical double door type powder coated with busbar neutral link earth rail & din rail, ISI marked for incorporation of MCB/ ISOLATOR/ RCB etc. testing & commissioning complete all as specified. Make:- Havells cat part no.DHDLVDRWGOFO08 or equivalent approved. Note for item No 124 & 125 : MCCB, MCB shall be measured & paid seperately.

S&F in repair of MCCB 3 pole , 125 Amps, 415 Volts, 36 KA breaking capacity and connection on existing DPX box complete all as specified.

S&F Ceiling fan complete with electronic type regulator and accessories 230 V,1400 mm sweep. White color,400 rpm speed complete set all as specified and directed. Make: Havells-Pacer White or equivalent in Bajaj,Crompton

Supply & fix Exhaust fans AC single phase 230/ 240 V of size 300 mm sweep Metallic grey, heavy duty with louvers ,complete all as specified and directed. Make : Bajaj -SKU Code 70003 or equivalent in Havells,Crompton

Supply & fix Exhaust fans AC single phase 230/ 240 V of size 200 mm sweep low noise with low power consumption,complete all as specified and directed. Make : Bajaj -SKU Code 250402 or equivalent in Havells,Crompton

Supply & fix Wall fans 230 volts single phase oscillating 400 mm sweep suitable for wall mounting with low power consumption,complete all as specified and directed. Make : Bajaj -SKU Code 250542 or equivalent in Havells,Crompton

S&F in repair surface and wall mounted 18 Watt LED tube light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver input voltage AC 230 V, 50 HZ complete all as specified and directed. Make Havells CAT PART No. LHEXBTP7IN1W018/Philips/Bajaj/CG

S&F in repair decorative recess mounted 34 watt LED lumaire , full output luminair for modern offices with CRCA powder coated body and new generation high effciency diffuser to provide soft glare free light suitable for 600 x 600 mm modular Armstrong/Grid ceiling complete including disconnecting and taking out old U/S light fittings all as specified. Make: Havells CAT PART NO.PLUTONEO2X2PLR34WLED857S / Philips/Bajaj/CG

S&F in repair ecorative recess mounted 34 watt LED lumaire , full output luminair for modern offices with CRCA powder coated body and new generation high effciency diffuser to provide soft glare free light suitable for 600 x 600 mm modular Armstrong/Grid ceiling including 30 v LED Driver complete including disconnecting and taking out old U/S light fittings all as specified. Make:- VENUS NEO 2x2 PLR18-48W LED+LED DRIVER 30V 34W DALI

S&F in repair Modular LED Dimmer switch, electronic type, 400 W , 2 module AC 230 volts complete all as specified. Make:Havells CAT PART NO.AHLDEBW040 / Philips/CG

S&F in repair LED bulk head luminarie with high brightness LEDs, 10 watt , 6000 K, decorative oval shaped, surface mounting IP 65 protection watt lamps decorative type with engineering plastic housing and frame with opal PMMA defuser complete including disconnecting and taking out old U/S light fittings all as specified. Make: Havells CAT PART NO.EXAFT10WLED857SSYMBOPC / Philips/Bajaj/CG

S&F in repair decorative light holder PVC / polycorbonate type with back plate suitable for batten fittings

S&F in repair recessed mounted LED downlighter 25 W with pressure die cast aluminium heat sink, & PC diffuser in white powder coated finish with integrated driver. Make:Havells CAT PART NO.ENDURANEODLR25WLED857MOD / Philips/CG

S&F in repair Integral Post Top lantern 25 W, 5700K , energy saving, envioremental friendly, long life aesthetically designed with symmentrical light distribution, spun alluminium landscape lumenaire with high power LEDs as light source complete all as specified. Make Havells CAT PART NO.PLUTONEO2X2PLR34WLED857S / Philips/Bajaj/CG

S&F in repair time switch 250 V single Phase of 20 Amp rating with contactor fitted inside steel enclosure, complete all as specified and directed. Note:- In item No. 139.00, the enclosure includes MCB Single pole 20 Amp rating for incoming and outgoing, connectors and three position toggle switch for auto and manual control.

S&F in repairs for LED domestic bulb 9 Watt type 240 volts complete all as specified and as directed. Make - Havells/Crompton/ Bajaj

M&L for earthing complete with Copper earth plate electrode of size 600 x 600 x 3.15mm buried directly in ground earth pit not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level connected to copper earth strip 20 x3 mm by means of copper bolts, nuts, check nuts including earth work in any type of soil, charcoal salt 15 cm alternate layer and around the earth plate as shown in electrical plate no 3 of SSR Part I 2010, 20 mm dia watering pipe medium grade 1.70 mtr long, GI protection pipe light grade 32 mm dia from earth pit to main board including necessary PCC 1:3:6 type C1 (using 20mm graded stone aggregate) pit and RCC 1:2:4 type B1 (using 20mm graded stone aggregate) pit cover reinforced with 6mm dia MS bar 75mm centre to centre 10mm dia handle complete all as specified.

Supply and fixing of Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawm in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 20 X 3 mm copper strip complete all as specified and directed.

M/S SANJAY AGARWAL

M/S YOGANSH CONSTRUCTION CO.

M/s Himgiri construction

Allied Agencies