Interior fit-out works at office space of Block B, 2nd floor, ISID Campus at 4 Vasant Kunj Institutional Area, New Delhi

S.NO. DESCRIPTION DSR AMOUNT DSR NDSR AMOUNT (RS) TOTAL (DSR+NDSR)

(RS) Correction

8 FURNITURE & CHAIR WORK 6,783,532.09 6,783,532.09

Grand Total Amount 39,028,787.0

Grand Total Amount 39,028,787.0

Digitally signed by AMIT

S.H. 1 ELECTRICAL WORK: SAGARMALA FINANCE CORPORATION LTD., NEW DELHI. ESTIMATE

ELECTRICAL WORK

S.NO DSR 2025 Ref. DESCRIPTION OF ITEM UNIT BOQ QTY DSR RATE NDSR Rate DSR AMOUNT NDSR Amount

A. INTERNAL WIRING

1 1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable in surface /

recessed pvc conduit medium with modular switch, modular plate, suitable G.I

box and earthing the point with 1.5 sqmm. FRLS PVC insulated copper

conductor single core cable etc as required.

2 1.55 Wiring for group controlled (looped) light point/fan point/exhaust fan point/

call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC

insulated copper conductor single core cable in surface/ recessed steel

conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper

conductor single core cable etc. as required.

3 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

FRLS PVC insulated copper conductor, single core cable in surface/ recessed

pvc conduit medium as required

c 1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 270.00 476.00 128,520.00

d 1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 50.00 652.00 32,600.00

e 1.7.5 2 X 10 sq. mm + 1 X 10 sq. mm earth wire Metre 50.00 778.00 38,900.00

f 1.7.9 4 x 6 sq.mm + 2 x 6 sq.mm. earth wire Metre 25.00 1,001.00 25,025.00

4 1.24 Supplying and fixing following modular switch/ socket on the existing modular

plate & switch box including connections but excluding modular plate etc. as

5 1.27 Supplying and fixing following size/ modules, GI box alongwith modular base &

cover plate for modular switches in recess etc. as required.

Digitally signed by AMIT

S.NO DSR 2025 Ref. DESCRIPTION OF ITEM UNIT BOQ QTY DSR RATE NDSR Rate DSR AMOUNT NDSR Amount

6 1.31 Supplying and fixing suitable size G.I box with modular plate and cover in front Each 90.00 545.00 49,050.00

on surface or in recess, including providing and fixing one 3 pin 5/6 amps

modular socket outlet and one 5/6 amps modular switch, connection etc. as

required. (For light plugs to be used in General purpose).

7 1.32 Supplying and fixing suitable size G.I box with modular plate and cover in front Each 10.00 659.00 6,590.00

on surface or in recess, including providing and fixing one 6 pin 5/6 & 15/16

amps modular socket outlet and one 15/16 amps modular switch, connection

etc. as required. (For power plugs to be used in General purpose).

8 2.18 Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole Each 5.00 1,806.00 9,030.00

and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in

sheet steel enclosure, on surface or in recess, with chained metal cover for the

socket out let and complete with connections, testing and commissioning etc.

9 MR Supply and fixing of 32 Amps industrial socket points as directed including Nos. 3.00 4,927.00 14,781.00

providing 32 A socket angled outlet and 32 amps interlocking socket with 32

amps "D" curve DP MCB 5 sided PSP thermoplastic for housing and L6-30 type

connector socket and MCB and earthing complete with connections, testing

and commissioning etc. as required.

10 MR Fabricating supplying installation on surface/cable tray 2.0 mm thick factory

fabricated GI Sheet raceways height 40 mm and of totally enclosed with 3mm

thick covered with screw/pushpit . Two lengths of channel / channel and

junction box shall be joined together to make it dust and water proof.

Chipping and removing screed to install the raceways in floor, including

removal and disposing of debris as per PMC instructions, finishing with PCC,

providing chicken mesh and making good as per Engineer in charge

11 4.5 Supplying and installing following size of perforated painted with powder

coating M.S. cable trays Reducer with perforation not more than 17.5%, joined

with connectors, suspended from the ceiling with M.S. suspenders including

bolts & nuts, painting suspenders etc as required.

a 4.5.10 450 mm width X 62.5 mm depth X 2.0 mm thickness RM 5.00 3,165.00 15,825.00

Digitally signed by AMIT

S.NO DSR 2025 Ref. DESCRIPTION OF ITEM UNIT BOQ QTY DSR RATE NDSR Rate DSR AMOUNT NDSR Amount

b 4.5.4 300 mm width X 50 mm depth X 1.6 mm thickness RM 10.00 1,876.00 18,760.00

c 4.5.2 150 mm width X 50 mm depth X 1.6 mm thickness RM 25.00 1,281.00 32,025.00

12 MR Fabrication. Supplying, installation, fixing in position GI Junction Boxes 2 mm

thick complete with 3 mm thick GI Covers with screw/push pit duly providing

rubber gaskets between the cover and the Junction Box, screws etc. as

required complete.

a 500 x 500 x 50 mm MS junction box. Nos. 2.00 1,245.00 2,490.00

b 350 x 350 x 50 mm MS junction box. Nos. 5.00 1,107.00 5,535.00

d 200 x 200 x 50 mm MS junction box. Nos. 15.00 900.00 13,500.00

e 150 x 150 x 50 mm MS junction box. Nos. 15.00 623.00 9,345.00

f 100 x 100 x 50 mm MS junction box. Nos. 10.00 484.00 4,840.00

13 1.17 Supplying and drawing following sizes of FRLS PVC insulated copper

conductor, single core cable in the existing surface/ recessed steel/ PVC

conduit as required.

14 MR Providing and fixing on work station/ partition of 3 Nos.6/13 amp flush type 3 Nos. 13.00 630.49 8,196.37

pin international socket and 1 No. 16 amps switch, cover plate in existing flap

box/ raceways/GI box for for housing switches and sockets and earthing

complete as required ( for ups power point)

15 MR Providing and fixing on work station/ partition of 2 Nos.6/13 amp flush type 3 Nos. 15.00 634.00 9,510.00

pin international socket and 1 No. 16 amps switch, cover plate in existing flap

box/ raceways/GI box for housing switches and sockets and earthing

complete as required ( For ups power points.)

16 MR Providing and fixing on work station/ partition of 1 No.6/13 amp flush type 3 pin Nos. 5.00 450.00 2,250.00

international socket and 1 No. 16 amps switch, cover plate in existing flap box/

raceways/GI box for housing switches and sockets and earthing complete as

required ( for ups power points.)

17 MR Providing and fixing on work station/ partition of 2 Nos.6/13 amp flush type 3 Nos. 10.00 623.00 6,230.00

pin international socket and 1 No. 16 amps switch, cover plate in existing flap

box/ raceways/GI box for housing switches and sockets and earthing

complete as required ( For raw power points.)

Digitally signed by AMIT

S.NO DSR 2025 Ref. DESCRIPTION OF ITEM UNIT BOQ QTY DSR RATE NDSR Rate DSR AMOUNT NDSR Amount

18 MR Providing and fixing on work station/ partition of 1 No.6/13 amp flush type 3 pin Nos. 13.00 450.00 5,850.00

international socket and 1 No. 16 amps switch, cover plate in existing flap box/

raceways/GI box for housing switches and sockets and earthing complete as

required ( for raw power points.)

19 1.21 Supplying and fixing of following sizes of pvc conduit medium along with

accessories in surface/recess including cutting the wall and making good the

same in case of recessed conduit as required.

c 1.21.3 32mm dia conduit Metre 65.00 209.00 13,585.00

20 ` Providing and fixing in position the following pvc flexible conduits including all

fixing accessories as required.

a 20 mm dia flexible conduit with end couplers RM 25.00 25.00 625.00

b 25 mm dia flexible conduit with end couplers RM 45.00 32.00 1,440.00

c 32 mm dia flexible conduit with end couplers RM 10.00 44.00 440.00

21 MR Supply, installation, testing and commissioning of the following sizes of PVC

trunking system with end caps, bends, elbows complete as required.

1 MR Providing and fixing of Gel-Chemical Earthing Electrode of G.I. made as pipe Each 2.00 39,371.00 78,742.00

in pipe technology(IS:3043 : 1987)duly CPRI Approved as per following

Length - (3000 mm)

DIA (outer) - (80 mm)

DIA (Inner) - (40 mm)

DIA-Terminal Strip Hole - (25 mm)

Space Inside Electrodes - (Filled with Conductive Mixture)

Hot Dip Galvanizing - (70 - 100 Microns)

And earth enhancing compound should be used to treat the soil for lowering

the effective ground impedance 50Kg for each earth pit to make it

maintenance free and to minimize the ground voltage potential rise and pit

covered with PVC Cover.

2 5.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including Each 2.00 8,351.00 16,702.00

accessories, and providing masonry enclosure with cover plate having locking

arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke

and salt as required.

Digitally signed by AMIT

S.NO DSR 2025 Ref. DESCRIPTION OF ITEM UNIT BOQ QTY DSR RATE NDSR Rate DSR AMOUNT NDSR Amount

3 5.10 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from Metre 60.00 1,638.00 98,280.00

earth electrode including connection with brass nut bolt, spring, washer

excavation and re-filling etc. as required.

4 5.11 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth Metre 60.00 755.00 45,300.00

electrode including connection with G.I. nut, bolt, spring, washer excavation

and re-filling etc. as required.

5 5.14 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess with all Metre 130.00 1,246.00 161,980.00

accessories for connections etc. as required.

6 5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess with all Metre 150.00 287.00 43,050.00

accessories for connections etc. as required.

7 MR Supplying ,laying, and making proper connections, end terminations, testing & 0.00

commissioning of the following sizes of 1.1 KV unarmoured PVC insulated

copper conducter cables heavy duty flexible cable (wires) in existing RCC

ducts/ laid in ground /laid on Cable Trays including clamping the cables to

supports in an approved manner as required complete with all accessories.

a 1 x 50 sq. mm PVC insulated copper conductor flexible cable (Green colour RM 50.00 664.00 33,200.00

for UPS Earthing)

b 1 x 25 sq. mm PVC insulated copper conductor flexible cable (wire) (Green RM 10.00 387.00 3,870.00

colour for UPS SDB Earthing)

c 1 x 16 Sq. mm PVC insulated copper conductor wire (Green Colour for UPS DB RM 10.00 263.00 2,630.00

Sub-main Earthing)

d 1 x 10 Sq. mm PVC insulated copper conductor wire (Green Colour for UPS RM 30.00 152.00 4,560.00

HUB DB Sub-main Earthing)

e 1 Nos x 6 Sq. mm PVC insulated copper conductor wire.(Green Colour for RM 70.00 77.00 5,390.00

false flooring earthing)

f 1 x 4 Sq. mm PVC insulated copper conductor wire (Green Colour) for server RM 70.00 48.00 3,360.00

8 MR Supply, installation, testing and commissioning of copper Earth Set 3.00 4,844.00 14,532.00

busbar(50X5X400)mm in MS sheet enclosure complete as required.

C SUPPLY & FIXING OF LIGHTING FIXTURES

Digitally signed by AMIT

S.NO DSR 2025 Ref. DESCRIPTION OF ITEM UNIT BOQ QTY DSR RATE NDSR Rate DSR AMOUNT NDSR Amount

8.5 LED Down lighter (COB Type) (System lumen efficacy ≥120 lm/Watt )Supplying,

Installation, Testing & Commissioning of LED Recessed/surface Down lighter

(Round / square/ Rectangular) COB Type of following body material and

construction as per IS : 10322 with driver as per the requirement with Driver

efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz,

Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV

with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 ,

UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5 %), life

time (LED, Driver & electrical circuitry), life time of minimum 50000 Burning

Hours with, 70% of initial Lumen maintained till life ends , CCT 3000°K /

4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour

Matching) <3, Maximum power consumption should not more than the

specified rating and Fixture shall be of relevant BIS standard. Manufactures

Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM

must have its own in house NABL lab setup for all testing facilities for

LED fixtures. "complete in all respect i/c external connections with 1.5 sq

mm FRLS/HFFR, PVC insulated copper conductor single core cable and

earthing etc. as required with Minimum 5 year OEM warranty. System lumen

efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report and all testing

required for LED fixtures as per BIS shall be submitted Shape size and CCT

shall be as approved by Engineer-in Charge as per requirement. (Thermal

management: heat sink of aluminium housing such that LED junction

temperature shall not rise above 90°C). Powder coated die cast /Extruded

aluminium Body including trim with Aluminium Reflector

Digitally signed by AMIT

S.NO DSR 2025 Ref. DESCRIPTION OF ITEM UNIT BOQ QTY DSR RATE NDSR Rate DSR AMOUNT NDSR Amount

LED Panel light 2x2 ft. (System lumen efficacy ≥120 <135 lm/Watt) Supplying,

Installation, Testing & Commissioning of Panel light 2x2 ft., of following body

material and construction as per IS : 10322 with driver as per the requirement

with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency

50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection

of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI

>80, UGR (Unified Glare Rating) <19, Flicker free, (flicker should be below 5 %),

life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours

with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K

/ 5700°K /6500°K (As per ANSI Bin), DCM(Standard Deviation Color

Matching) <3, Maximum power consumption should not more than the

specified rating and Fixture shall be of relevant BIS standard. Manufactures

Word Mark/ Name Engraved/ Embossing/ Screen printing on housing.

complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR,

PVC insulated copper conductor single core cable and earthing etc. as

required with Minimum 5 year OEM warranty. System lumen efficacy ≥120

<135 lm/Watt output .LM79 & LM80 Test report and all testing required for

LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as

approved by Engineer-in-Charge as per requirement. (Thermal management:

heat sink of aluminium housing such that LED junction temperature shall not

rise above 90°C). Powder coated die cast /Extruded aluminium Body

(Thickness > 1.20 mm)

19.4 RGB LED Strip Supplying Installation, Testing and Commissioning of LED Each 9,689.00

RGB/RGBWW/ RGBNW/ RGBA/RGBW suitable for exterior use having IP68 rating

(as per site requirement). Flexible light strip of 5 mtr standard

length with 12-15 Watt per meter. Luminaire shall be capable of producing

dynamic colour changing light for with 16 million colours by DMX/Ethernet

based control. Minimum System lumens 450 lumens/meter and System Lumen

Efficacy > 30lm/w. Luminaire light beam spread - 100-110°, The Strip should

have IP 68 protection and is offered IP 68 rated connectors to join the LED

Strips in continuity. The luminaire must be offered with Aluminium channel for

mounting the strip lights. The product should be complete with all

accessories and Driver. Lifetime of complete luminaire (LED, Driver, Electrical &

control circuitry) shall be at least L70:50000 burning hours at 50°C.

Luminaire shall be conforming to BIS (IS 10322) with dully R Number marked.

Luminaire shall be complete with replaceable driver and capable of

operating at line voltage without any separate power supply from 24 V

DC, Fixture shall be suitable to operate at an ambient temperature range of -

10°C to +50°C. The successful bidder shall submit the following

certifications/reports for approval before supply of materials: product data

sheets, LM79. report from NABL accredited lab, illuminance diagram, polar

curve & LM80 report issued by LED manufacturer & RoHS Compliance along

with CE certificate.

Digitally signed by AMIT

S.NO DSR 2025 Ref. DESCRIPTION OF ITEM UNIT BOQ QTY DSR RATE NDSR Rate DSR AMOUNT NDSR Amount

MR Supply of 5mtr IP20 flexible LED strip light made of Polymide double sided PCB, RM 80.00 900.00 72,000.00

Strip should have minimum efficacy at System level >=70lumens/watt with

nominal system lumens 700lm/mtr, Life of LED strip : 35000 burning Hrs. @ (ta 45

C) @L70 Lumen maintenance , CCT of 3000K, CRI Ra >=80, an operating

Voltage Range of 100 - 300 VAC, and surge protection of 3KV.

MR Supply of 9W recessed, deep inset COB LED Downlight luminaire having 1350 No. 150.00 900.00 135,000.00

lumens with dimensions of 62mm dia and height of 74mm.The cut out dia (Φ)

should not be more than 57mm. Luminaire shall be made up of pure polyster

powder coated pressure die cast Aluminium housing with inbuilt heat sink to

provide better thermal management to enhance LED life. The luminaire should

be equiped with the secondary optics of high efficiency white coloured

reflector. The luminaire should be available with multiple beam angle options

of 38° and 60°.LM 80-08 compliant ceramic / aluminium base LEDs from

reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Citizen should

be provided. LEDs used in the product shall comply with EN 62471 for Photo-

biological safety and certificate for the same from manufacturer shall be

provided. The luminaire should be IP20 rated. The LED shall be compliant with

LM80-08 standard with L70 life of 50000 Hrs tested at maximum current

(Complete LM 80 test report for LED should be submitted for 10000 hrs of

testing). The LEDs used should be with CCT of 4000 K and CRI of Minimum 80.

LED Driver shall be non-integrated type, Isolated, Constant Current operated

driver with range 100-265V AC. Driver Efficiency > 85% & 2.5 KV internal surge

protection, Power factor greater than 0.95 and total harmonic distortion (THD)

of less than 10% should be integral to the luminaire. Manufacturer shall have

inhouse lab approved by NABL or ministry of science of govt of India. LM 79

and LM80 reports need to be submitted from a NABL/UL accredited lab to

verify above parameters. Compliance to Indian Standards of IS10322 Part 5 /

1 MR Supply, laying and testing of under noted sizes of Aluminium conductor XLPE

insulated PVC sheathed & sleeved FRLS armoured and overall PVC sleeved 1.1

KV grade power distribution cables conforming to relevant IS code 7098 and

as per specification in ground or in existing trenches/ through pipe/ on wall /

on cable trays including dressing and clamping the cable with MS clamps

etc. as required.

Digitally signed by AMIT

S.NO DSR 2025 Ref. DESCRIPTION OF ITEM UNIT BOQ QTY DSR RATE NDSR Rate DSR AMOUNT NDSR Amount

2 11.1 Supplying and making end termination with brass compression gland and

aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE

aluminium conductor cable of 1.1 KV grade as required.

3 MR Supply fixing and making proper end termination with sutable accessories of

under noted sizes of copper conductor PVC insulated PVC sleeved 1.1 KV

grade power distribution flexible cable/wires heavy duty conforming to

relevant IS code and as per specification in ground or in existing trenches/

through pipe/ on wall / on cable trays including dressing and clamping the

cable as required.

a 1 x 50 sq.mm PVC insulated flexible copper conductor cables RM 25.00 664.00 16,600.00

b 1 x 25 sq.mm PVC insulated flexible copper conductor cables RM 35.00 443.00 15,505.00

c 1 x 16 sq.mm PVC insulated flexible copper conductor cables RM 80.00 346.00 27,680.00

d 1 x 10 sq.mm PVC insulated flexible copper conductor cables RM 80.00 235.00 18,800.00

e 1 x 6 sq.mm PVC insulated flexible copper conductor cables RM 165.00 213.00 35,145.00

f 1 x 4 sq.mm PVC insulated flexible copper conductor cables RM 170.00 97.00 16,490.00

4 MR Supply and fixing of ms angle/chanel support or frame work in position Kg. 250.00 125.00 31,250.00

including clamps,with fabrication work including cutting, bending, welding,

drilling bolting etc. as per design as required. One coat of primer and 2 coats

of enamel paint of approved shade shall be provided.

5 MR Supplying and fixing of following size of perforated G I cable trays with

perforation not more than 17.5%, in convenient sections, joined with

connectors, suspended from the ceiling with G I. suspenders including bolts &

a 450 mm width X 50 mm depth X 2.0 mm thickness RM 10.00 1,356.00 13,560.00

b 300 mm width X 50 mm depth X 1.6 mm thickness RM 50.00 1,079.00 53,950.00

c 150 mm width X 50 mm depth X 1.6 mm thickness RM 90.00 643.00 57,870.00

G L.T PANELS/ DISTRIBUTION BOARDS

Digitally signed by AMIT

S.NO DSR 2025 Ref. DESCRIPTION OF ITEM UNIT BOQ QTY DSR RATE NDSR Rate DSR AMOUNT NDSR Amount

MR Supply, installation, testing and commissioning of indoor floor mounted/ wall

mounted, IP42, factory built, modular, sectionalised, compartmentalized,

extendable type LT cubicle panel of suitable size suitable for operation on

433/415 volts, 50 Hz AC 3 phase 4 wire supply system fabricated from CRCA

sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plates

with stiffeners wherever required, having vibration free structure chemically

treated with seven tank process or better before painting for surface treatment

and powder coated in approved shade, with suitable electrolytic grade high

conductivity bus bars extensible, DMC/ SMC (whichever is superior) bus bar

supports, with short circuit withstand capacity as mentioned ,bottom base

channel of section not less than 100mmX 50mmX 5 mm thick, fabrication shall

be done in transportable sections, entire panel shall have a common earth

bar of required size at the rear with 2 Nos. earth stud, connections and

interconnection with solid conductor wires / copper strips, neutral links, control

wiring with 1.5 sqmm. & 2.5sqmm. PVC insulated FRLS copper conductor S/C

cable for voltage & current respectively, including providing and fixing

following switch gears and as per schedules ,technical specifications

etc.complete as required.

1 Electrical Panel-1 Nos 1.00 127,316.00 127,316.00

Surge arrester (1 No.)

2kVp,50kA rated surge arrestor suitable fo both lightning and switching

surges,complete with suitable protection fuse (inbuilt).

415V, 50Hz, 160A, 4P, 25kA for 1 sec rated thermal magnetic based MCCB

with inbuilt LSIG protection - 1 Nos.

Metering (1 No.)

Multifunction meter with inbuilt selector switch for measurement of current,

voltage, power factor, KVA, kVAh, KVArh, KVAR, frequency, ,KWHr (both line

and phase) complete as per specifications

Indication lamps

LED type phase indication lamps suitable for 230V,50Hz AC (red, yellow, blue) -

LED type Indication lamps for breaker, suitable for 230V,50Hz AC supply (on,

off, trip) - 1 set

415V ,160/5A, 10VA, CL-1 current transformer for metering

Busbar (1 Set - 4P + E)

Busbar made up of electrolytic grade high conductivity aluminium in

rectangular cross section and suitable for 415V, FP, 50 Hz, 200 A, 25 kA for 1 sec

of required length and cross sectional area.

2 Nos. 415V, 50Hz, 100A, 4P, 25kA for 1 sec rated Thermal magnetic based

7 Nos. 415V, 50Hz, 40A, 4P, 10 kA MCB.

Digitally signed by AMIT

S.NO DSR 2025 Ref. DESCRIPTION OF ITEM UNIT BOQ QTY DSR RATE NDSR Rate DSR AMOUNT NDSR Amount

4 Nos. 415V, 50Hz, 63A, 4P, 10 kA MCB.

Indication lamps

LED type phase indication lamps suitable for 230V,50Hz AC (red, yellow, blue) -

2 UPS Output Panel

415V, 50Hz, 160A, 4P, 25kA for 1 sec rated thermal magnetic based MCCB

with inbuilt LSIG protection - 2 Nos.

Metering (2 No.)

Multifunction meter with inbuilt selector switch for measurement of current,

voltage, power factor, KVA, kVAh, KVArh, KVAR, frequency, ,KWHr (both line

and phase) complete as per specifications

Indication lamps

LED type phase indication lamps suitable for 230V,50Hz AC (red, yellow, blue) -

LED type Indication lamps for breaker, suitable for 230V,50Hz AC supply (on,

off, trip) - 2 set

2 Nos.-415V ,160/5A, 10VA, CL-1 current transformer for metering

Busbar (1 Set - 4P + E)

Busbar made up of electrolytic grade high conductivity aluminium in

rectangular cross section and suitable for 415V, FP, 50 Hz,300 A, 25 kA for 1 sec

of required length and cross sectional area.

2 Nos. 415V, 50Hz, 40A, 4P, 10 kA MCB.

3 Nos. 415V, 50Hz, 63A, 4P, 10 kA MCB.

3 Light & Power Distribution Board

a MR Supply and installation of sheet metal enclosed double door 48modules TPN Nos. 1.00 20,149.00 20,149.00

DB, each phase consisting of 8 Nos. 10/20 AMP SP MCB’s and each phase

controlled by one number 100 mA sensitivity 63 AMPS DP RCCB backed up

with 63 Amps DP MCB and one number 63 A TPN MCB as incomer. all mcb's

shall be C-curve

b MR Supply and installation of sheet metal enclosed double door 56modules TPN Nos. 1.00 25,685.00 25,685.00

DB, each phase consisting of 10 Nos. 10/20 AMP SP MCB’s and each phase

controlled by one number 100 mA sensitivity 63 AMPS DP RCCB backed up

with 63 Amps DP MCB and one number 63 A TPN MCB as incomer. all mcb's

shall be C-curve

Digitally signed by AMIT

S.NO DSR 2025 Ref. DESCRIPTION OF ITEM UNIT BOQ QTY DSR RATE NDSR Rate DSR AMOUNT NDSR Amount

4 UPS Distribution Boards

a MR Supply and installation of sheet metal enclosed double door 56modules TPN Nos. 1.00 25,685.00 25,685.00

DB, each phase consisting of 12 Nos. 10/20 AMP SP MCB’s and each phase

controlled by one number 100 mA sensitivity 63 AMPS DP RCCB backed up

with 63 Amps DP MCB and one number 63 A TPN MCB as incomer. all mcb's

shall be C-curve

b MR Supply and installation of sheet metal enclosed double door 48modules TPN Nos. 1.00 20,149.00 20,149.00

DB,, each phase consisting of 10 Nos. 32/16 AMP SP MCB’s and each phase

controlled by one number 100 mA sensitivity 63 AMPS DP RCCB backed up

with 63 Amps DP MCB and one number 63 A 4P MCB as incomer. (For UPS

Power) all mcb's shall be D-curve.

H MR Supply, installation of 1.1KV grade rubber mat 900mm wide in electrical rooms. RM 6.00 2,020.00 12,120.00

I MR Supply & Fixing of danger notice board Nos. 2.00 1,709.00 3,418.00

J MR Supply of First aid box Nos. 1.00 493.00 493.00

K MR Supply & Fixing shock treatment chart Nos. 2.00 1,709.00 3,418.00

TOTAL ELECTRICAL WORK AMOUNT 2,053,126.00 1,398,777.37

Digitally signed by AMIT

S.H. 2 UPS WORK : SAGARMALA FINANCE CORPORATION LTD., NEW DELHI., ESTIMATE

S.NO DSR/ DESCRIPTION OF ITEM UNIT BOQ QTY. DSR Rate DSR Amount MR RATE NDSR AMOUNT

Online UPS- Input supply: Three Phase, Output supply: Three Phase

Supplying, installation, Testing & Commissioning of following capacity at full load (Unity Power

Factor) at operating temperature 0 to 40 0C, Relative humidity 0 to 95%, Online double conversion

true sine wave Uninterrupted hot swapable (allow for the replacement or addition of battery

modules without shutting down the entire system) modular Power Supply (UPS) system with N+1

modules (N denotes total number of modules required for rated capacity). The UPS shall include a

Rectifier, inverter, battery bank suitable for 30 minutes back up (Battery VAHcapacity shall not be

less than 1600 VAH per KVA of UPS rating per Hour backup time) on full load (Battery shall be VRLA,

SMF in ABS Container) and Static Bypass switch along with provision for manual bypass, suitable

isolation transformer for additional protection against neutral faults etc. UPS shall have inbuilt phase

sequence correction. The UPS systems offered are to be of the latest technology with Digital

Control Microprocessor based for reliable operation using Insulated Gate Bipolar

Transistor (IGBT)'s both for the rectifier & inverter

(3 Level) with PWM (Pulse Width Modulation). The quality of design, manufacturing and inspection

process should confirm to the relevant Inter-national standards such as IEC/EN/VDE. The operating

efficiency of the UPS systems shall be >96% while operating on battery mode and delivering quality

power to the 100% non-linear loads. Current total harmonic effect(ITHD) on the input grid shall be

<5% at 50 %load. (The required LC ( inductor (L) and a capacitor (C)) filters shall be included in UPS

cost), extreme power factor kit to be included to limit the input power factor (PF) to 0.99 and

output power factor shall be unity (i.e. kw rating of the UPS shall be kva rating x 1 ), however UPS

shall be suitable to take load at 0.7 laging to 0.7 leading power factor loads. UPS shall be suitable

for incoming supply AC : 3Phase 400V +/-20%, 50 Hz +/-5 Hz, AC Output voltage: 3Phase 415 Volt, 50

Hz +/- 0.2Hz, Overload capacity of 120% for 10 mins, Sine wave output. Non condensing, noise level

a 26.2.3 30KVA (Each Power module shall be < 10 KVA) No. 1 505748 505748 -

2 STATIC SWITCH MODULE FOR FLOOR DB

SITC of static switch module with microprocessor based control and suitable for liner and non linear

load at particulars distribution board of critical load in event of short circuit overload or any other

fatal condition with built-in Technical Protections like short circuit, Overload, High/Low Voltage

cutoff protection of load from source inclusive of Bypass facility Static Bypass Module is activated

during malfunctioning conditions of load like :-

• Short Circuit

• Bypassing of particular load if required

• Resulting in non tripping of main UPS unit

• Input Voltage (320-460VAC) 3 phase

• Input frequency 50Hz

Digitally signed by AMIT

Indication & Monitoring

• UPS Supply on/source I

• Load on UPS supply/source I

• Main supply on/source II

• Load on mains supply/Bypass

• Bypass Switch on

• Bypass Switch off

a Capacity: 63A 3 Phase Nos 1 62897.00 62,897.00

TOTAL UPS WORK AMOUNT 505,748.00 62,897.00

Digitally signed by AMIT

S.H. 3 FIRE DETECTION & ALARM SYSTEM WORK : SAGARMALA FINANCE CORPORATION LTD., NEW DELHI.

S.NO DESCRIPTION OF ITEM UNIT BOQ QTY. RATE NDSR AMOUNT

1 FIRE DETECTION & ALARM SYSTEM

1.1 Supply, Installation, Testing, and commissioning of existing fire alarm cable as Mtrs 650 33 21450.00

per site requirement complete as required

1.2 Supply, Installation, Testing, and commissioning of smoke detectors compatible Nos 75 2491 186825.00

with fire alarm system and as per site requirement complete as required

1.3 Supply, Installation, Testing, and commissioning of fault isolators compatible Nos 5 2975 14875.00

with fire alarm system and as per site requirement complete as required

complete as required

1.4 Supply, Installation, Testing, and commissioning of control/monitor module Nos 1 2560 2560.00

compatible with existing fire alarm system and as per site requirement

complete as required complete as required

1.5 Supplying, installation, testing and commissioning of micro processor based

intelligent addressable main fire alarm panel, central processing unit with the

following loop modules and capable of supporting not less than 240 devices

(including detectors) and minimum 120 detectors per loop and loop length up

to 2 km, network communication card, minimum 320 character graphics/ LCD

display with touch screen or other keypad and minimum 4000 events history

log in the non volatile memory (EPROM), power supply unit (230± 5% V, 50 hz),

48 hrs back-up with 24 volt sealed maintenance free batteries with automatic

charger. The panel shall have facility to connect printer to printout log and

facility to have seamless integration with analog/digital voice evacuation

system (which is part of the schedule of work under SH: PA System) and shall

be complete with all accessories . The panel shall be compatible for IBMS

system with open protocol BACnet/ Modbus over IP complete as per

specifications.

Note : Cost to inclusive of integration of fire alarm system with existing building

fire larm system.

Digitally signed by AMIT

2.1 Supply, Installation, Testing, and commissioning of speaker cable as per site Mtrs 650 34 22100.00

requirement complete as required

2.2 Supply, Installation, Testing, and commissioning of 6watt ceiling speaker as per Nos 50 1464 73200.00

site requirement complete as required

2.3 Supply, Installation, Testing, and commissioning of 10 watt wall mount speaker Nos 2 3404 6808.00

as per site requirement complete as required

2.4 Supply, Installation, Testing, and commissioning of 500watt amplifier as per site Nos 1 77576.00 77576.00

requirement complete as required complete as required

TOTAL FIRE DETECTION & ALARM WORK AMOUNT 541,013.00

Digitally signed by AMIT

S.H. 4 : LAN WORK SAGARMALA FINANCE CORPORATION LTD., NEW DELHI, ESTIMATE

S.NO DESCRIPTION OF ITEM UNIT BOQ QTY. RATE AMOUNT

1 PASSIVE LAN SYSTEM

1.1 Supply, Installation, Testing & Commissioning of 24 Port loaded Jack Panel 8 Nos 9301 74408.00

CAT 6A, Staggered 24 Port panel in 1U Rack Unit, Copper Alloyed Contact

Material, EIA 568A/B wired, PC + glass fiber, UL 94V-0, black color, Front Port

Labelling, 22-24 AWG Wire Accumulation complete as required

1.2 Supply, Installation, Testing & Commissioning of quad face plate having 65 Nos 177 11505.00

provision for four I/O along with spring type shutter for dust proof, made of ABS

PVC plastic complete as required

1.3 Supply, Installation, Testing & Commissioning of dual face plate having 20 Nos 206 4120.00

provision for one I/O along with spring type shutter for dust proof, made of ABS

PVC plastic complete as required

1.4 Supply, Installation, Testing & Commissioning of CAT 6A Information 65 Nos 206 13390.00

Outlet,Universal label permits T568A or B wiring, UL® Listed, meets all TIA and

ISO requirements.Complete in all respect as required by the site.

1.5 Supplying and drawing of LSZH UTP 4 pair CAT 6A LAN low smoke Cable in the 4500 Mtrs 64 288000.00

existing surface/ recessed Steel/ PVC conduit as required.

1.6 Supply, Installation, Testing & Commissioning of CAT 6A Patch Cord LSZH 2 Mtr, 65 Nos 193 12545.00

4 pair 26 AWG stranded copper wire, Pre-terminated with RJ45 plugs, Slim

clear anti-snag slip on boots, Suitable for EIA 568A or 568B wiring, UL® Listed,

meets all TIA and ISO requirements. Complete in all respect as required by site

1.7 Supply, Installation, Testing & Commissioning of CAT 6A Patch Cord LSZH 1 Mtr, 65 Nos 210 13650.00

4 pair 26 AWG stranded copper wire, Pre-terminated with RJ45 plugs, Slim

clear anti-snag slip on boots, Suitable for EIA 568A or 568B wiring, UL® Listed,

meets all TIA and ISO requirements. Complete in all respect as required by site

1.8 Supply, Installation, Testing and Commissioning of 42 U Networking Rack 1 Nos 64798 64798.00

(600*800), Front Glass Door Unit and Grilled back door unit, lockable Door unit,

Load Rating of Min 450 Kg. Pillar of frame must be aluminum and Rest plated

are steel, Powder Coated Rack with Castors (4nos.), Fan (4 Nos.), Cable

Manager (2Nos), Full Tray Unit (1 Nos.), PDU (1Nos.) complete in all respect as

Digitally signed by AMIT

1.9 Supply, Installation, Testing & Commissioning of 6 Core Armoured Multi Mode 120 Mtrs 156 18720.00

Fiber optic cable, Central Lose Tube With Jelly Compound, Corrugated steel

tape armoured, Heaving 1300 nm Wavelength in the existing surface/

recessed Steel/ PVC conduit as required.

1.10 Supply, Installation, Testing and Commissioning of Multi Mode fiber SC-LC 3 Nos 2056 6168.00

Duplex patch cord of 2 Mtrs. for Gigabit Connection between Patch Panel

and Switch complete as required.

1.11 Supplying, Installation, Testing and Commissioning of fiber optic SFP + fiber 2 Nos 6466 12932.00

patch cord of 3 meter length having SFP+ modules at both ends complete as

1.12 Supply, Installation, Testing & Commissioning of Fiber optic Mini GBIC SFP Trans 2 Nos 13408 26816.00

receiver 10G for network switch with Built-in spring latch for easy module

removal, Hot Swappable, Comply IFC and FDA Safety Standards complete as

1.13 Supply, Installation, termination & testing of 2 mtr length SC pigtails 9/125 5 Nos 648 3240.00

micron for Multi Mode Pigtails complete as required.

1.14 Supply, Installation, Testing & Commissioning of 12 Port Unloaded Line 1 Nos 11060.00 11060.00

Interface Unit LIU, 19",1u Rack Mountable unit with splice Tray Holder, Cable

Guide, Fiber Management and Splicing of Pigtails and Fiber Cables Including

Joints and Connectors complete as required.

TOTAL LAN WORK AMOUNT 561,352.00

Digitally signed by AMIT

S.H. 5 DATA CENTER WORK : SAGARMALA FINANCE CORPORATION LTD., NEW DELHI., ESTIMATE

S.NO DESCRIPTION OF ITEM UNIT BOQ RATE NDSR

1 Rodent Repellent System

SITC of Rodent Repellent System by using electronic transmitters of high

frequency sound waves, which will emit sound at very high decibel levels

painful to pests, as described in the specification given hereunder. The system

shall consist of a master console, satellites and its cable circuits These will be

electronic transmitters of high frequency sound waves (well above the 20KHZ

frequency which is the upper limit of the hearing range of the human ear.)

emitting sound at high decibel levels (sound pressure) that is audible and

painful to pests, but inaudible and harmless to humans. The system will consist

of one Master Console and twelve Sateliites / Transducers. The console will be

installed in the control room, or as directed and the satellites in the problem

areas as required. The powerful sound waves generated by the satellites shall

be within the hearing range of many pests ansd cause them pain and

discomfort. Satellites should be quiet and inaudible to humans

These will be electronic transmitters of high frequency sound waves (well

above the 20KHZ frequency which is the upper limit of the hearing range of

the human ear.) emitting sound at high decibel levels (sound pressure) that is

audible and painful to pests, but inaudible and harmless to humans. The

system will consist of one Master Console and twelve Sateliites / Transducers.

The console will be installed in the control room, or as directed and the

satellites in the problem areas as required. The powerful sound waves

generated by the satellites shall be within the hearing range of many pests

ansd cause them pain and discomfort. Satellites should be quiet and inaudible

Digitally signed by AMIT

Each Satellite will cover an open floor area of approximately 400 sq.ft. for an

average height of the ciling is 10 ft. As regards area of suspended ceilings or

raised floorings, it should cover an approximate area of 400 sq.ft. The satellites

1. Be able to mount in any angle to match the decor.

2. Possible to install in sensitive areas

3. Should withstand high temperature in suspended ceilings and low

temperature in cold storages and air locks

4. Should not require a power connection.

5. Should be able to test on an audible range with the help of a self-testing

facility or any other suitable means

Crystal: DM 44t 24V MAS Germany

Frequency: Peak frequency responses of the satellites are

i) 21.6 KHz + /- 3KHZ

ii) 31.6 KHz + /- 3KHz

iii) 50.4 KHz + /- 3 KHz

iv) 60 KHz + /- 3KHz

Nature of sound waves: The sound waves propagated should be linear sine

waves with constantly varying frequencies.

Operating environment: Range of -4 deg C to 60 deg C, 100 % humid

environment and under water.

Circuit: Signal generator should have full wave rectification, regulated 12V DC

power supply to withstand power fluctuations ranging from 170V AC to 270V

Amplifier should have a preamplifier stage coupled with signal generator for

dual transistor amplification having a push-pull configuartion

Uniform pressure output of 80 db to 110 db with 360 deg transmission angle.

Linear propagation of mixed / variable frequencies detectable at, or about 40

ft. distance from the source (Transducer/Satellite). Spatial average intensity-

Encluding following accessories as required.

5A Power Socket (230 V AC) will be provided for each VHFo as may be

required. Alternatively.

Digitally signed by AMIT

Operating frequency: Above 20 KHz (Variable), Sound output: 80 db to 110db

at 1.00 mts., Powre output: 800MW per satellite., Power Consumption: 15 Watt

Approx., Power Supply: 230 V AC, 50 Hz, Mounting: Wall / Table, Dimension: 16"

x 8" x 4", Weight: 5.5 Kgs approximately

Master Console of Rodent Repellent satellites/transducers

controller for all areas (Main DC + UPS) with communication port with BMS

Satellites/Transducers for all areas and voids

2 core 1.5 sq.mm Cu. Armored FRLS Cable

Make - C-System / Maser / Star Electronics

1.a. Complete Rodent Repellent System Job 1 104546.00 104,546

2 Water Leakage Detection System

SITC of Addresble Water leak detection sensing tape shall be installed in the

Server room. Events are clearly reported on LCD/LED display with full English

language description of the nature of the fault in the panel. Provision shall be

inbuilt for integrating with the Ibms system. Components of water leak

detection system The Water leak detection system shall comprise of Tape

Sensors, Water Leak detection modules, Condensation detectors, I/O modules

and sounders all connected to a Control Panel. Control Panel The control

panel shall be Computerized 2 zone multiplex controller with a facility to add

on dialer and speech processor. The system shall be programmed, armed or

disarmed through a control keypad. The control key pad shall have a 16

character LCD display for viewing various events.

Digitally signed by AMIT

The code to arm or disarm the system shall be changed only by entering a

master code. The system shall have 2 zones and all the detectors shall be

connected through a 2 core cable. The entire system shall be backed up by a

maintenance free rechargeable battery to take care of system's power

requirements whenever power fails. The system shall be totally tamper proof

and shall activate an alarm if the control panel is opened, the sensors

tampered with or if the system cables are cut even in the disarmed state. The

system shall log 500 events. The Detectors, I/O Modules, Remote Keypads and

other Devices shall be connected to a system on a single 2 Core Cable Bus to

avoid individual cabling of zones. The system shall have a Buffer memory of

minimum 250 events and log each event with exact date and time. The

controller shall have a Serial Port for connecting to a computer.

The system shall be totally tamperproof and shall activate an alarm if the

control panel is opened, the sensors tampered with or if the system cables are

cut even in the disarmed state. Tape Sensors UL listed Tape sensors are to be

used to detect water leaks under floors and the Tape sensors shall be covered

with plastic netting to prevent short circuits when used in metal trays or

conduits and enables the tape to be folded at right angles to allow easy

routing. Condensation detectors shall be able to provide early warning of the

condensing conditions in chilled beam/ceiling systems to avoid the possibility

of the indoor rain. The detector shall have relay output for direct connection to

the controller.

The sounder shall give audible alarm when any sensor operates. It shall be

complete with electronic oscillations, magnetic coil (sound coil) and

accessories ready for mounting (fixing). The sound output from the Hooter

should not be less than 85 decibels at the source point. Controller Technical

i) No. of Zones 2

ii) Events 500 event log

iii) Control keypad 20 button illuminated keypad

iv) Display 16 Character LCD on control keypad

v) Water leak Detector

vi) Response Time <1 Sec.

Encluding following accessories as required.

Digitally signed by AMIT

4 Zone WLD Control Panel along with Power Supply, In-built charger, Dry

Contact Relay with communication port for BMS

Detection/Sensing Cable 10 mtrs/length

Hooter with strobe

2C X 1.5 sq.mm copper Armored FRLS Cable for connecting Panel with

Make - C-System / Maser / Star Electronics

2.a. Complete Water Leakage Detection System Job 1 77,081 77,081

TOTAL DATA CENTER WORK AMOUNT 181,627.00

Digitally signed by AMIT

S.H. 6 HVAC WORK : SAGARMALA FINANCE CORPORATION LTD., NEW DELHI., ESTIMATE

DSR Rate after GST NDSR Rate

Sr.No DSR No. Description Unit Quantity DSR Rate Multiplication DSR Amount NDSR Amount

A CHAPTER-1: VARIABLE REFRIGERANT FLOW SYSTEM

1.a VRF/VRV OUTDOOR UNIT

Supply, Installation, Testing & Commissioning of Modular type Variable

Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units

suitable for cooling/heating having 100% hermetically sealed inverter type

twin Rotary/Scroll Compressor(s),minimum two compressors (with

individual separate PCB) for above 14HP modules, microprocessor based

Controller, top discharge type condensing unit(s), with R-410-A Refrigerant

or equivalent, vibration Isolators with suitable foundation etc. complete as

required. To have better efficiency condenser fan shall be capable to operate

at different speed with respect to load. The unit shall deliver the rated

capacity and in confirmation as per IS 18728:2024 and CPWD

Specifications and work even at 50°C ambient temperature without tripping.

The system shall be able to deliver 100% of the rated capacity upto 39

Degree Celcius.The unit shall be suitable to work on 400V +/- 10%, 3 Phase,

7.3 50Hz AC power supply and BMS compatible. The unit shall be filled with first

charge of the refrigerant and ready for use as required. The condenser

should be coated with a hydrophilic film to prevent water accumulation on

surface of the heat exchanger, enhance water dispersion, and reduce the

risk of degradation, thereby improving overall performance and durability.

The Indian Seasonal Energy Efficiency Ratio (ISEER) of the unit shall be as

per Energy Conservation and Sustainable Building Code (ECSBC) 2024 as

below and complete as per CPWD specification, connections, inter

connections etc. as required. (For capacity <40 kWr ISEER 7.4, Capacity >

40 and <70 ISEER 7.5, Capacity > 70 ISEER 7.6 for Super ECSBC

Supply, Installation, Testing and Commissioning of following minimum

capacity 4 way Cassette Type Indoor ceiling mounted unit equipped with

synthetic washable media pre-filter, fan section with low noise fan /

dynamically balanced blower, multispeed motor, coil section with DX Copper

coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary

supports, vibration Isolation, Corded remote control etc., suitable for

1.b 7.4 operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as

required. The Indoor units must shut down upon receiving a singal from the

BMS System/Fire Signals. The system shall be capable to adjust air flow as

per room requirement in auto mode. The cooling capacity of indoor unit will

be at air inlet conditions of 27 Degree C DB and 19 Degree C WB

temperature. (Make will be same as of Outdoor)

4-Way Cassette type

HI - WALLSPLIT SYSTEMS

Digitally signed by AMIT

Supply , Installation, Testing and Commissioning of Air Cooled Hi Wall split type

Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface /

concealed copper Refrigerant piping with insulation (closed cell elastomeric

nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power

cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R407 Green

Refrigerant, wireless Remote control, suitable for working between 180-260V

with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of

performing cooling, dehumidification, air circulation of following capacity

with Scroll / rotary compressor. The system shall be able to deliver 100% of the

rated capacity upto 42 Degree Celsius. Min 5 year Original Equipment

Manufacturer (OEM) warranty both compressor and Printed Circuit Board

(PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing

control IS /International Electro technical Commission (IEC) 60730, hermetic

compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS

12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The

system shall be able to operate up to 50 0C (out door ambient temperature).

1.b.2 8.2.3 1.5 TR with 5 Star BEE Rating Nos 2 42055 84110

1.b.3 MR Corded Remote controls Nos 1 3195 3195

1.b.4 MR Communication cable (1.5 sqmm X 2 Core) Rmt 350 331 115850

Supply, installation, testing and commissioning of MS fabricated outdoor unit

stand for placing outdoor unit of VRV system. The stand shall be

manufactured from MS C channel of minimum 3-4 mm thick. It shall be

finished with enamel paint as per client/architect approval.

2.0 REFRIGERANT PIPING

Supply, Installation, testing and commissioning including vaccumiazation

and Nitrogen testing of following nominal sizes of soft/hard drawn copper

refrigerant piping for VRV/VRF system, complete with fittings, with suitable

DSR adjustable ring type hanger supports, jointing/brazing including accessories,

2025 insulated with XPLE Class-O tubular insulation/with Class-O closed cell

VRF/VRV elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation

as given below for Suction and Liquid lines, all accessories as per

specifications etc. as required :

7.14.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Rmt 100 256.0 25600

7.14.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Rmt 100 346.0 34600

7.14.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Rmt 150 487.0 73050

7.14.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Rmt 150 615.0 92250

7.14.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Rmt 180 739.0 133020

7.14.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Rmt 110 904.0 99440

7.14.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Rmt 90 1068.0 96120

7.14.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Rmt 80 1157.0 92560

7.14.9 31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm Rmt 80 1222.0 97760

7.14.10 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm Rmt 50 1286.0 64300

7.13 Supply, Installation, Testing and Commissioning of Y/T/Multi Joints. Joints shall

be of same Original Equipment Manufacturer (OEM) make as of ODUs and

7.13.1 Indoor Units Each 87 4535.0 394545

7.13.2 Outdoor Multi Joint Each 5 8098.0 40490

CABLE TRAY FOR REFRIGERANT PIPING

Digitally signed by AMIT

Supplying and installing of following size of perforated hot dip galvanized G.I

cable tray with perforations not more than 17.5%, in convenient sections,

joined with connectors, suspended from ceiling with G.I suspenders including

bolts and nuts, etc. for carrying refrigerant pipe in outdoor application as

3.1. I 450 mm width x 62.5 mm depth x 2 mm thickness Rmt 450 1,186 533700

3.2 II 225mm width x 50 mm depth x 1.6 mm thickness Rmt 180 801 144180

4.0 CONDENSATE DRAIN UPVC PIPE

Supply, installation, testing and commissioning of uPVC Pipe ,complete with

fittings, supports,U trap arrangement,Clean Plug with 6mm nitrile insulation

and accessories as per specifications, drawings.

B CHAPTER-2: FRESH AIR DEMAND CONTROLLED ENHANCED VENTILATION

11.0 EXHAUST/FRESH AIR LOUVERS

Supplying, Installing, testing and commissioning of powder coated extruded

aluminium exhaust air louvers with min.60 % free area, with metallic frame

work & fixing accessories, to be fixed on external wall to exhaust air from

basement area to ambient , it shall be suitable for exhausting required air in

CFM . Louvers need to be suitable in order avoid rain water entry in to

basement @ 15 degree deflection with bird screen complete as per

specification approved drawings and schedules.

E CHAPTER 5: VENTILATION SYSTEM

22.0 INLINE FANS

Supply , installation , testing and commissoning , of duct mounted inline fans

complete with direct driven centrifugal fan , TEFC squirrel cage induction

motor , with efficiency class IE-3 whichever is higher , direct drive

22.1 MR arrangement , heavy gauge sheet metal casing , rubber isolator mounts and

other accessories.The fan shall be complete in all respect and should match

the specification ,Drawings and Schedule. Inline fans shall be of following

22.2 1100 CFM (15 mm Static Pressure) Nos. 5 16819 84095

23.0 MR CEILING MOUNTED EXHAUST FANS

Supply , installation , testing and commissoning , of ceiling mounted inline

fans complete with direct driven centrifugal fan , direct drive arrangement ,

heavy gauge sheet metal casing , rubber isolator mounts and other

accessories.The fan shall be complete in all respect and should match the

specification ,Drawings and Schedule. Inline fans shall be of following

G CHAPTER-7: ELECTRICAL WORK

Digitally signed by AMIT

Supply, installation, testing and commissioning of indoor/outdoor floor

mounted/ wall mounted, IP43/IP65, IS 61439 factory built, modular,

sectionalised, compartmentalized, extendable type LT cubicle panel of

suitable size suitable for operation on 433/415 volts, 50 Hz AC 3 phase 4 wire

supply system fabricated from CRCA sheet steel of 2mm thick for frame work

and covers, 3mm thick for gland plates with stiffeners wherever required,

having vibration free structure chemically treated with seven tank process or

better before painting for surface treatment and powder coated in

approved shade, with suitable electrolytic grade high conductivity bus bars

extensible, DMC/ SMC (whichever is superior) bus bar supports, with short

circuit withstand capacity as mentioned ,bottom base channel of section not

less than 100mmX 50mmX 5 mm thick, fabrication shall be done in

transportable sections, entire panel shall have a common earth bar of

required size at the rear with 2 Nos. earth stud, connections and

interconnection with solid conductor wires / copper strips, neutral links,

control wiring with 1.5 sqmm. & 2.5sqmm. PVC insulated FRLS copper

conductor S/C cable for voltage & current respectively, including providing

and fixing following switch gears and as per schedules ,technical

specifications etc.complete as required.

415V, 50Hz, 160A, 4P, 25kA for 1 sec rated microprocessor based MCCB with

inbuilt LSIG protection - 1 Nos.

Metering (1 No.)

Multifunction meter with inbuilt selector switch for measurement of current,

voltage, power factor, KVA, kVAh, KVArh, KVAR, frequency, ,KWHr (both line

and phase) complete as per specifications

Indication lamps

LED type phase indication lamps suitable for 230V,50Hz AC (red, yellow, blue) -

LED type Indication lamps for breaker, suitable for 230V,50Hz AC supply (on,

off, trip) - 1 set

415V ,160/5A, 15VA, CL-1 current transformer for metering

Busbar (1 Set - 4P + E)

Busbar made up of electrolytic grade high conductivity aluminium in

rectangular cross section and suitable for 415V, FP, 50 Hz, 300 A, 25 kA for 1

sec of required length and cross sectional area.

5Nos. 415V, 50Hz,63A, 4P, 10 kA MCB.

Supply,installation,testing and commissioning of 63A 4P,Isolator , heavy duty

solid neutral link in a sheet steel enclosure with required arrangement for

incoming and outgoing cable complete as required.(Weather Proof)

Supply,installation,testing and commissioning of 40A 4P,Isolator , heavy duty

solid neutral link in a sheet steel enclosure with required arrangement for

incoming and outgoing cable complete as required.(Weather Proof)

Digitally signed by AMIT

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. 143,450.00

pipe from earth electrode including connection with G.I. nut,

26.1. 5.11 bolt, spring, washer excavation and re-filling etc. as required.Providing and Metre 190 755

fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

Providing and laying earth connection from earth electrode with 6 SWG dia 10,955.00

26.2 5.12 G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection Metre 35 313

with G.I. thimble excavation and re-filling as required.

LT CABLE AND TERMINATION

Supplying, unloading, storing , laying, testing and commissioning of following

sizes of 1.1 kV grade XLPE insulated, FRLS (Heavy duty) Aluminium/copper

conductor armoured/unarmored cables suitable for working voltage upto

and including 1100 Volts, laid and tied on existing overhead cable trays; or

buried underground or laid and tied over MS supports in masonry trenches

including providing MS supports and clamps for fixing to supports in an

approved manner, providing fire retardant sealant where required complete

as required and as per specifications. Circuit identification tag should be

attached with the concerned cable alongwith the test report of following

sizes of cable to be submitted by the contractor at the time of delivery of

material at site. (Cable length may increse as per existing panel location).

Supplying and making end termination with brass compression gland and

28.0 9.1 aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE

aluminium conductor cable of 1.1 KV grade as required.

Supplying following 1.1kV grade, XLPE insulated, FRLS type control

cables,suitable for 415V, 50Hz, AC system, with inner and outer PVC sheath,

29.0 outer sheath provided with FRLS insulation and with all components as

mentioned in BOQ, specifications and schedule, complete as required.

29.1 MR 2C X 1.5 sqmm copper conductor Metre 39 196 7,644

29.2 MR 2C X 2.5 sqmm copper conductor Metre 85 247 20,995

Supplying and making end termination with single compression brass gland

and lugs for following size of 1.1kV grade, XLPE insulated, FRLS type control

cables,suitable for 415V, 50Hz, AC system, with inner and outer PVC sheath,

outer sheath provided with FRLS insulation and with all components as

mentioned in BOQ, specifications and schedule, complete as required. The

cost shall include the cost of crimping and all tools and accessories required

to complete the job in full respect.

Note : Al lugs shall be used for Al cable and cu lugs shall be used for copper

30.1 MR 2C X 1.5 sqmm copper conductor Each 5 177 885

30.2 MR 2C X 2.5 sqmm copper conductor Each 5 194 970

CABLE MANAGEMENT

31.0 SOCKET OUTLET POINT WIRING

Wiring including termination for 6 amp socket outlet point with 3 x 2.5 sq. mm

PVC insulated FRLS copper conductor wires in concealed/exposed 1.6 mm

thick in MS conduits including providing 6 amp switch,3 pin 6A shuttered

socket,anodised MS box for housing switches sockets, approved White

Polycarbonate modular cover plate and earthing.

Digitally signed by AMIT

Wiring including termination for 16 amp power socket outlet points with 3 x 4

sq. mm PVC insulated FRLS copper conductor wires for the 16 amp socket

outlet with 3 x 4 sq. mm PVC insulated FRLS copper conductor wires for the

second outlet of 650/1100 Volts grade in concealed/exposed 1.6 mm thick in

31.2 MR MS conduits as called for including providing 16 amp flush type combined 6 Set 16 6,019 96,304

pin shuttered sockets and switches, anodised MS outlet boxes for 16 A 6 pin

sockets and switches,approved White Polycarbonate modular cover plate

TOTAL HVAC WORK AMOUNT 4200569 1430923

Digitally signed by AMIT

S.H. 7 FIRE FIGHTING WORK : SAGARMALA FINANCE CORPORATION LTD., NEW DELHI., ESTIMATE

S.NO DSR 2025 DESCRIPTION OF ITEM UNIT BOQ QTY. RATE DSR Rate NDSR Rate DSR AMOUNT NDSR

after GST AMOUNT

A SPRINKLER SYSTEM

The main fire fighting sprinkler riser pipe including floor isolation valve, flow

indicating switch, inspectors-test-cum-drain assembly and drain pipe in vertical

shafts have already been installed by the main builder. The contractor needs

to make connections, alteration to existing main network only. All works to be

done after seeking permission from building manitenance agency.

1 27.7 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe

conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees,

flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling

with suitable clamp/support frame and painting with two or more coats of

synthetic enamel paint of required shade complete as required :

a. 27.7.1 25 mm nominal bore Metre 80 920.00 73,600.00

b. 27.7.2 32 mm nominal bore Metre 120 1039.00 124,680.00

c 27.7.3 40 mm nominal bore Metre 40 1259.00 50,360.00

d 27.7.4 50 mm nominal bore Metre 25 1557.00 38,925.00

e 27.7.5 65 mm nominal bore Metre 20 1955.00 39,100.00

f 27.7.6 80 mm nominal bore Metre 10 2277.00 22,770.00

g 27.7.7 100 mm nominal bore Metre 60 3077.00 184,620.00

h 27.7.8 150 mm nominal bore Metre 5 4299.00 21,495.00

2 27.21 Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type

sprinklers of rating 68 degree centigrade with required accessories :

27.21.1 Pendent Sprinkler Each 100 599.00 59,900.00

27.21.2 Upright Sprinkler Each 100 599.00 59,900.00

27.21.3 Horizontal side wall sprinkler Each 5 699.00 3,495.00

27.21.4 Concealed sprinkler Each 5 1553.00 7,765.00

3 27.22 Providing & fixing of pressure switch in M.S. pipe lineincluding connection etc. Each 2 1670.00 3,340.00

4 27.23 Providing & fixing flow switch in following sizes M.S. pipe including connection

etc as required.

Digitally signed by AMIT

5 27.25 Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL

Listed) of stainless steel complete with 15 NPT on reducer thread with maximum

working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet)

25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread

with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes

complete as required.

6 Making connection with existing main header including butterfly valve, flanges

and accessories required.

A.4.a 100 mm nominal bore Each 2 3958.00 7916

A.4.b 150 mm nominal bore Each 1 3806.00 3806

7 Providing, fixing, testing and commissioning Ball valve with hard chrome plated

ball inside PTFE (Teflon) seat and ring with chrome plated centre handle with

female BSP2 threads complete in all respect. Minimum working pressure 15

B PORTABLE FIRE EXTINGUISHERS:

1 Providing & fixing of clean agent gas based residue free stored pressure FE-36

Dupont- HFC-236fa (HEXAFLUOROPROPANE – CF3-CH2-CF3) multipurpose type

having 0% ODP with magnetic pressure gauge having the facility to check with

the magnetic pressure kit on site pressurised by dry nitrogen, can height 341MM,

diamater is 108 MM Gross weight 3.6Kg, empty weight 1.6 Kg, discharge time is

minimum 6 sec, controllable discharge machanisim, embossed fire rating as

per the BS EN 3 - 21B, BIS 15683 marked with EPDM Hose with helium leak

detection tested and certificate enclosed, range 4 mtr with plastic yellow

safety seal with pull marked on it.

B.1.a Capacity 2.0 kg Each 2 6310.00 12620

B.1.b Capacity 4.0 kg Each 2 10257.00 20514

2 Providing & Fixing of stored pressure Fire Extinguisher ABC powder type (Mono

Ammonium Phosphate Powder) Magnetic Pressure Gauge having the facility

to check at site, Discharge Time less than 9 Secs, Controllable discharge

mechanism, Range minimum 4 Meters, applicable on Class A,B,C and

A Rating- 21A, B Rating 55B as per BS EN-3 BIS 15683 marked, Can Construction :

Deep drawn & CO2 Mig welded, Valve Construction : Forging & Machining,

Internal Coating of Can : Epoxy Powder coating, External Coating ofCan :

Epoxy Polyster Powder coating, Sheet metal thickness : 1.60MM, Helium Leak

B.2.a. Capacity 2 Kg. Each 4 3952.00 15808

B.2.b. Capacity 6 Kg. Each 4 8873.00 35492

TOTAL FIRE FIGHTING WORK AMOUNT 1047601 97065

Digitally signed by AMIT

S.H. 8 FURNITURE & CHAIR WORK : SAGARMALA FINANCE CORPORATION LTD., NEW DELHI., ESTIMATE

Item No. Item Name Item Description Area Unit Qty Total Ref Image

The overall size of the table shall be 2400L x 950D x 760H with Side Unit Extension 1900L x 600D x 610H. The main table top shall be size of 2200L x 950D. The

tabletop shall be 65mm thick. The tabletop shall be resting on one side of the gable end with the same thickness of table top and other side on the side unit.

The table top and gable end shall have the sleek chamfer design of 15mm straight and the rest will be tappered. The Modesty of the table shall be come up

with same sleek chamfer with 15mm straight and rest will be tappered. In this one steel strip of 10mm wide shall be placed horizontally in front part of the

modesty which inhancing the looks of this executive table. The tabletop shall have a leather pad with size of 1145mm x 495mm that gives a premium look. The

table shall not have any sharp edges. The table shall have Pop up box access with cable cubby with size of 235mm x 125mm for easy wire access. The table

shall be made of MDF with veneer finish. One Aditional single shutter Compartment with push to open system shall be comes up, which directly connected to

the oposite side gable end of the side unit. The side unit shall be sized 1900L x 600D x 610H. It shall come with the configurations of 1 shutter 2 drawer and rest is

open for CPU. The side unit top shall be come up with same sleek chamfer design with of 8mm straight and the rest will be tappered. and the outer body

panel shall be come up with 15mm of thickness. The side unit shall have seven horizontal slotted cutout for air ventilation of size 170LmmX10Hmm for cooling

the CPU. Ventilation slotted cutouts shall covered with moulded plastic covers which provide smooth radius and looks. Drawer channels shall have soft close.

1 All the Drawer and shutters shall be operated by finger grove with the help of V shaped aluminium extrusion on the top of Drawer and shutter facia shall have MD CABIN eatch 1 479561 479561

overall size of 20 L x 34 H x 1.5mm thick. Back Unit:The overall size of theback unit shall be 2400L x 450D x 2000H. The Back unit top and side shall be 60mm thick.

The top and sides shall have the same sleek chamfer design of 10mm straight and the rest will be tappered.The back side pannel shall be come up with 15mm

thickness. All the corners shall be comes with 60mm Radius.The Right side portion of the back unit shall be come up with full height storage of size 750mm

width.Bottom side two compartments of this full height storage shall be come up with finger groove shutters and upeer side of this full height storage shall be

come up with finger groove Glass shutters. Full height storage shutters shall be comes with 15mm thickness and the inner shelves comes with 25mm thick thick.

same bottom sides two compartments shall be comes with on the other side of the back unit of 750mm wide.The rest Portion of the back unit shall be come

up with open compartments. Open compartments shelves shall be come up with 35mm thickness and the verticle twin supports shall be comes with 25mm of

thickness.Verticle support panel shall be comes with forward and reverse chamfered with 8mm thick of centric straight part. which provide smooth edges and

looks asthetically plasent.

High Back Chair (Leatherite)

High back Chair having overall height 1200-1300mm, back height of 790 mm from seat level and width of 460 mm from top & 520 from mid (lumbar) level. Seat

Depth shall be 490 mm and adjustable upto 530mm. seat width shall be 520 mm measured at centre of the seat. Seat height shall range between 430 mm to

520 mm. Armest shall be finished with foam & leatherite on the top & the structure of the armrest shall a die cast aluminium with buffed finish & fixed with the

seat below. The length of the top of the arm shall be 250 mm & width of 60 mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness

of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat, back & headrest shall be upholstered with Leatherette 75% PVC & 25% polyester – 640 GSM, Abrasion-

MD CABIN HB 100000 cycles over PU faom. The synchro mechanism shall be provided having 3 position multilocking & seat adjustable on the left hand side and height

2 MD CABIN eatch 1 25817 25817

CHAIR adjustment on the right hand side of the user.The mechanism shall allow 360 degree revolving feature along with height adjustablility. Aluminium die cast

pedestal having length 5 twin 60 mm wheel castors heavy duty shall be provided. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards.

tolerance of 25mm for seat & back size to be considered.

Medium Back Chair (Leatherite)

Medium back Chair having overall height 1050-1150mm, back height of 590 mm from seat level and width of 460 mm from top & 520 from mid (lumbar) level.

Seat Depth shall be 490 mm and adjustable upto 530mm. seat width shall be 520 mm measured at centre of the seat. Seat height shall range between 430

mm to 520 mm. Armest shall be finished with foam & leatherite on the top & the structure of the armrest shall a die cast aluminium with buffed finish & fixed

with the seat below. The length of the top of the arm shall be 250 mm & width of 60 mm. Seat should be made up of foam pre moulded at 55 kg/m3 density.

hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat and back shall be upholstered with Leatherette 75% PVC & 25% polyester – 640 GSM,

3 Abrasion-100000 cycles over PU faom. The synchro mechanism shall be provided having 3 position multilocking & seat adjustable on the left hand side and MD CABIN eatch 4 22371 89484

height adjustment on the right hand side of the user.The mechanism shall allow 360 degree revolving feature along with height adjustablility. Aluminium die

cast pedestal having length 5 twin 60 mm wheel castors heavy duty shall be provided. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards.

tolerance of 25mm for seat & back size to be considered.

2 seater Dimension (L)1590mm X (D)940mm X (H)970mm Supplying and placing in position of sofa as per photograph. The sofa is a stylish new sofa design that

melds smooth flowing lines with panelled seat cushions upholstered in our premium Leatherette.Contemporary Design with Combination of German Beech

Wood and Durian Plywood used in the Frame. Sturdy Frame Constructionwith Tufted Seat Cushioning and Panelled Backrest. The sofa having Scooped Seating

for added comfort with High Armrests and Sleek Wooden panel Inserts with warm brown polish.Material: Chocolate Brown Leatherette upholstery, Legs:Solid

wood Legs.The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has

a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke free & soft. The product shouldh have BIFMA

COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA

Certification, BIFMA LEVEL-1 Certification, GRIHA Certification, FSC Certification. The product should

be as per above given specification under theguidance of project architect & Engineer in charge. ( The Colour Shade and design shall be as per client

4 2 SEATER SOFA requirement and selection image is just a reference Image ) MD CABIN each 1 589882 589882

Digitally signed by AMIT

1 seater Dimension (L)1090mm X (D)940mm X (H)970mm Supplying and placing in position of sofa as per photograph. The sofa is a stylish new sofa design that

melds smooth flowing lines with panelled seat cushions upholstered in our premium Leatherette.Contemporary Design with Combination of German Beech

Wood and Durian Plywood used in the Frame. Sturdy Frame Constructionwith Tufted Seat Cushioning and Panelled Backrest. The sofa having Scooped Seating

for added comfort with High Armrests and Sleek Wooden panel Inserts with warm brown polish.Material: Chocolate Brown Leatherette upholstery, Legs:Solid

wood Legs.The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has

single SEATER a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke free & soft. The product should have BIFMA

5 COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA MD CABIN each 1 44132 44132

Certification, BIFMA LEVEL-1 Certification, GRIHA Certification, FSC Certification. The product should

be as per above given specification under theguidance of project architect & Engineer in charge. ( The Colour Shade and design shall be as per client

requirement and selection image is just a reference Image )( The Colour Shade and design shall be as per client requirement and selection image is just a

reference Image )

The overall size of the table shall be 1050 L x 525 D x 450 H mm. The top surface of the table shall be in boat shape design having maximum size at the middle &

lesser at the ends to form this unique shape. The table top shall be made up of 18mm thick Prelaminated particle board of E1 norms. The edges shall be sealed

properly with 2mm thick PVC edge banding on automatic machine. The understructure of the table shall be made from solid wood i.e properly treated &

seasoned kiln dried beach wood, finished with clear synthetic PU coating for the best resilence and high durability. The legs and the frame shall be joined

6 CENTER TABLE together by method of tenon and mortise for durability and better aesthetics. Four legs shall be provided and the cross section of leg at the bottom shall be MD CABIN eatch 1 10776 10776

35x35 and top shall be 55x35 provided in tappered finish for better looks. The outer side of the legs shall be rounded & inner side shall be corner edges. The

wooden frame shall be of size 55mm x 22mm thick with visible face of 55 mm front and 22mm shall be below the table top running at all four ends as well as

one support in the middle.( The Colour Shade and design shall be as per client requirement and selection image is just a reference Image )

Providing & fixing of The overall size of the table shall be 600 L x 600 D x 450 H mm. The top surface of the table shall be in boat shape design having maximum

size at the middle & lesser at the ends to form this unique shape. The table top shall be made up of 18mm thick Prelaminated particle board of E1 norms. The

edges shall be sealed properly with 2mm thick PVC edge banding on automatic machine. The understructure of the table shall be made from solid wood i.e

properly treated & seasoned kiln dried beach wood, finished with clear synthetic PU coating for the best resilence and high durability. The legs and the frame

7 SIDE TABLE shall be joined together by method of tenon and mortise for durability and better aesthetics. Four legs shall be provided and the cross section of leg at the MD CABIN eatch 2 9190 18379

bottom shall be 35x35 and top shall be 55x35 provided in tappered finish for better looks. The outer side of the legs shall be rounded & inner side shall be corner

edges. The wooden frame shall be of size 55mm x 22mm thick with visible face of 55 mm front and 22mm shall be below the table top running at all four ends

as well as one support in the middle. ( The Colour Shade and design shall be as per client requirement and selection image is just a reference Image )

Providing & fixing of The overall size of table shall be 2400L x 2000D x 750H. With side unit 2000L x 550D x 640H.The table top shall be 50mm thick at the edges of

the top.The table shall be made of prelaminate board in melamine finsih. Tabletop corner shall be round. The modesty panel of the main table 550mm height

shall be made up of 13mm thick Pre-laminate particle board E1 norms duly finished with 2mm pvc edge banding on automatic machine. The modesty panel

shall be connected through L-shape Bracket connector. At the front side of table LED light strip shall be provided. The LED light increase the overall look of the

table. The table top shall be rest on, one side of fixed pedestal and other side shall be on Extented return unit. Fixed pedestal shall have 2 equal drawer with

finger grove handle ( handless desgin ). Side unit - Side table shall be size 2000 L x 550 D x 640 H with 16mm thick E1 grade particle board with melamine finish

with 2mm pvc edge bending on automatic machine. Fixed side return with 2 drawers and 2 swing door, open shelf and open space for CPU, with holes for

DIRECTOR customer put their sockets. Fixed side return shall have flexibility to be placed left or right during time of first assembly.All the Drawer and shutters shall be DIRECTOR

TABLE operated by finger grove handle on the Drawer and shutter facia. For wire manegnment table shall be provided flipup size of 85W x 155L with provision of 2 CABIN

socket, 2 USB and 1 c-type port. The overall size of back unit shall be 2400L x 450D x 2000H. The back unit shall be made of prelaminate board with melamine

finish.The storage shall have one openable shutter with size of 600W x 390D x 1960H made of 15mm thick board with pvc edge band finish.The storage shall

have open cabinet. The open shelf shall be made of 25mm thick partical board and in middel compartment sliding door shall be provided.The top open

cabinet shall have have provision of LED strip light. storage shall have open shelves to keep the awards, trophies or documents. Storages shall have multiples

compartments with all other essential hardwares like hings, handles etc.( The Colour Shade and design shall be as per client requirement and selection

image is just a reference Image )

High Back Chair (Leatherite)

High back Chair having overall height 1200-1300mm, back height of 790 mm from seat level and width of 460 mm from top & 520 from

mid (lumbar) level. Seat Depth shall be 490 mm and adjustable upto 530mm. seat width shall be 520 mm measured at centre of the seat.

Seat height shall range between 430 mm to 520 mm. Armest shall be finished with foam & leatherite on the top & the structure of the

armrest shall a die cast aluminium with buffed finish & fixed with the seat below. The length of the top of the arm shall be 250 mm & width

of 60 mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS

3400. Seat, back & headrest shall be upholstered with Leatherette 75% PVC & 25% polyester – 640 GSM, Abrasion-100000 cycles over DIRECTOR

PU foam. The synchro mechanism shall be provided having 3 position multilocking & seat adjustable on the left hand side and height ,CVO nos 3 25817 77450

adjustment on the right hand side of the user.The mechanism shall allow 360 degree revolving feature along with height adjustablility. CABIN

Aluminium die cast pedestal having length 5 twin 60 mm wheel castors heavy duty shall be provided. The Gas Lift used shall be class 4

tested as per ANSI BIFMA standards. tolerance of 25mm for seat & back size to be considered. ( The Colour Shade and design shall be as

per client requirement and selection image is just a reference Image )

Medium Back Chair (Leatherite)

Medium back Chair having overall height 1050-1150mm, back height of 590 mm from seat level and width of 460 mm from top & 520

from mid (lumbar) level. Seat Depth shall be 490 mm and adjustable upto 530mm. seat width shall be 520 mm measured at centre of the

seat. Seat height shall range between 430 mm to 520 mm. Armest shall be finished with foam & leatherite on the top & the structure of

the armrest shall a die cast aluminium with buffed finish & fixed with the seat below. The length of the top of the arm shall be 250 mm &

width of 60 mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming

to IS 3400. Seat and back shall be upholstered with Leatherette 75% PVC & 25% polyester – 640 GSM, Abrasion-100000 cycles over PU DIRECTOR

faom. The synchro mechanism shall be provided having 3 position multilocking & seat adjustable on the left hand side and height ,CVO nos 9 22371 201338

adjustment on the right hand side of the user.The mechanism shall allow 360 degree revolving feature along with height adjustablility. CABIN

Aluminium die cast pedestal having length 5 twin 60 mm wheel castors heavy duty shall be provided. The Gas Lift used shall be class 4

tested as per ANSI BIFMA standards. tolerance of 25mm for seat & back size to be considered. ( The Colour Shade and design shall be as

per client requirement and selection image is just a reference Image )

Digitally signed by AMIT

Supplying and placing in position of L-shape sofa as per image. Kiln-dried solid wood frame makes it warp and scratch-resistant.Tapered solid wood legs in

Coffee oak finish complement the design.Premium velvet upholstery in dark Blue adds a pop of colour to your space.Tested with high rub counts, velvet

ensures high abrasion resistance.Plush cushioned back and upholstered track arms offer comfortable seating.Complementary throw cushions add a layer of

comfort.Anti-sag construction offers the right level of support for maximum comfort.Leg Material:Solid Wood, The product should have BIFMA COMPLIENT

Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1 Certification, GRIHA Certification, FSC Director

11 L SHAPE SOFA each 2 16048 32096

Certification. The product should be as per above given specification under theguidance of project architect & Engineer in charge.Dimension(W)2180mm X Cabin

(D)1600mm X (H)960mm ( The Colour Shade and design shall be as per client requirement and selection image is just a reference Image ) ( The Colour Shade

and design shall be as per client requirement and selection image is just a reference Image )

Supplying and placing in position a modernist-design upholstered loral 2-seater lounge sofa with overall dimensions of (w)1350mm x (d)870mm x (h)710mm,

providing an approximate seating area of 1120 mm (w) × 570 mm (d). the internal framework shall be constructed from 12 mm thick, anti-termite-treated

plywood (tentatively grade 303 as per Indian standards for commercial, common, and moisture-proof plywood) with a controlled moisture content of less than

10–12% to ensure long-term structural stability and durability. the under-structure frame shall further incorporate 12 mm thick kiln-dried german steam beech

wood, selected for its superior strength and resistance to warping, thereby enhancing the overall durability of the sofa. the seating base is to be fitted with a

high-quality web suspension system that provides resilient support and ensures lasting seating comfort. all joints in the structure must be firmly bonded using

super bond adhesive and reinforced with star screws, wooden pins, and stapler pins to maintain long-term joint integrity under regular usage. the sofa design

features a panelled back and cushioned armrests to promote comfortable lounging, with the entire structure padded using high-resilience polyurethane (p.u.)

2 SEATER SOFA foam of 32 density. the seat shall include 40 mm thick stack foam, while the backrest and armrest cushioning shall also utilize 40 mm thick foam, all securely CVO Cabin each 1 88240 88240

fixed using adhesive super glue. the final foam assembly will be upholstered in premium yellow 54-pattern leatherette, selected for its premium feel, aesthetic

appeal, and ease of maintenance. the sofa shall be complemented by stylish sleek mild steel (ms) legs that have undergone the 11-tank powder coating

process. this premium, multi-stage metal pre-treatment includes comprehensive cleaning, rinsing, and a crucial zinc phosphating step, which ensures the final

powder coat offers superior adhesion, exceptional durability, and maximum corrosion resistance for a high-quality, long-lasting product.The product should

have BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1 Certification, GRIHA

Certification, FSC Certification. The product should be as per above given specification under theguidance of project architect & Engineer in

charge.Dimension(W)1350mm X (D)870mm X (H)710mm ( The Colour Shade and design shall be as per client requirement and selection image is just a

reference Image )

Centre table Size

The overall size of the Centre table shall be 1050 mm Length x 525 mm depth, 450 mm height. the table top shall be made up of 18mm

thick prelaminated particle board of approved shade All the edges of discussion surface shall be provided with machine pressed 2mm thick

PVC lipping glued with hotmelt Eva glue free from any VOC. Under Structure Support: Table top shall be supported on CRCA legs duly

12 CENTER TABLE powder coated. The understructure should be provided with 32mm by 1.6mm thickenss swaged tube from 32mm top and 19mm bottom. each 3 8959 26876

The edges of the table top shall be rounded & edges shall not be sharp. The legs shall be in angular design & thicker on the top & thinner

on the boattom side. ( The Colour Shade and design shall be as per client requirement and selection image is just a reference Image )

The overall size of the Centre table shall be dia 600mm, 450 mm height. the table top shall be made up of 18mm thick prelaminated

particle board of approved shade All the edges of discussion surface shall be provided with machine pressed 2mm thick PVC lipping glued

with hotmelt Eva glue free from any VOC. Under Structure Support: Table top shall be supported on CRCA legs duly powder coated. The

table understructure should be provided with 32mm by 1.6mm thickenss swaged tube from 32mm top and 19mm bottom. The edges of

the table top shall be rounded & edges shall not be sharp. The legs shall be in angular design & thicker on the top & thinner on the bottom DIRECTOR

13 SIDE TABLE each 4 7733 30930

side.( The Colour Shade and design shall be as per client requirement and selection image is just a reference Image ) CABIN

Providing & fixing of The overall size of the Recliner shall be 850 mm width x 1050 mm height & depth 895mm and 1575mm when reclined. Height of the armrest

from the ground level shall be 600 mm. overall width of the armrests including top flap shall be 130 mm. The recliner shall electrically operated and handheld

remote shall be provided along with the recliner attached with flexible wire. The user shall be able to recline fully with the help of remote and the foot resting

flap shall automatically come out from below to expand the body to give comfort. The recliner shall also have the lifting feature within remote to push the

body from back & enable the user to get up from the recliner easily if required. The user touch surface of the recliner shall be upholstered with Pure Leather

and the other one shall be in matching leatherite.Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and tolerance of 5% to

be considered in pipe thickness & Pipe sizes. ( The Colour Shade and design shall be as per client requirement and selection image is just a reference Image )

14 RECLINER DIRECTOR each 3 77465 232394

Digitally signed by AMIT

The overall size of table shall be 2200L x 900D x 750H. With side unit 2000L x 550D x 610H.The table top shall be 50mm thick at the edges of the top.The table shall

be made of prelaminate board in membrane finsih. Tabletop corner shall be round. The modesty panel of the main table 550mm height shall be made up of

13mm thick Pre-laminate particle board E1 norms duly finished with 2mm pvc edge banding on automatic machine. The modesty panel shall be connected

through L-shape Bracket connector. At the front side of table LED light strip shall be provided. The LED light increase the overall look of the table. The table top

shall be rest on, one side metal slant leg and other side shall be on Extented return unit. The metal slant leg shall be Size of at the Top 670 width to connect the

Aluminium corner and the bottom with 520mm width. Side unit - Side table shall be size 2000 L x 550 D x 610 H with 16mm thick E1 grade particle board with

melamine finish with 2mm pvc edge bending on automatic machine. Fixed side return with 2 drawers and 2 swing door, open shelf and open space for CPU,

with holes for customer put their sockets. Fixed side return shall have flexibility to be placed left or right during time of first assembly.All the Drawer and shutters

shall be operated by finger grove handle on the Drawer and shutter facia. For wire manegnment table shall be provided flipup size of 85W x 155L with

GM CABIN provision of 2 socket, 2 USB and 1 c-type port. The overall size of back unit shall be 2000L x 390D x 1980H. The back unit shall be made of prelaminate board with

15 GM CABIN eatch 2 94494 188989

TABLE combination of membrane & laminated finish.The storage shall have one openable shutter with size of 600W x 390D x 1960H made of 15mm thick board with

pvc edge band finish.The storage shall have open cabinet. The open shelf shall be made of 25mm thick partical board and in middel compartment sliding

door shall be provided.The top open cabinet shall have have provision of LED strip light. storage shall have open shelves to keep the awards, trophies or

documents. Storages shall have multiples compartments with all other essential hardwares like hings, handles etc. ( The Colour Shade and design shall be as

per client requirement and selection image is just a reference Image )

The overall size of Chair shall be height 1210 to 1350 +/-5 mm, Back Width 495 mm and above at Top, 385mm or more width at bottom

and 380mm and more at the lumber. Seat Width 500 +/-5 mm, Seat Depth 490 to 560 +/-5 mm and Seat height 480mm to 650 mm +/-

5mm range. And over all chair width should be 690 +/-5mm and Overall chair depth should be 630 to 690 +/-5mm. Seat should be made

up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf or more at 50% deflection conforming to IS 3400. Seat shall be

upholstered with Polyester & viscose- 380 GLM or more, Abrasion- > 45000 cycles. The chair shall be supplied with Lenear Mesh at the

back & shall be provided With 290mm width or more, 180mm height Headrest or more. Adjustable Lumbar Support full length of size 325

mm,105 mm height and 3mm thickness in contoured form can travel upto 30mm at the back . The Chair should be provided with Synchro

tilt Mechanism with Multi lock features. The mechanism shall allow 360 degree revolving feature along with height adjustablility. chair

GM CABIN shall have seat sliding mechanism.Three Way Adjustable Arms to be provied with height adjustment button made of Delrin P 500 and arm

height adjustability nob shall be provided under the armrest. The mechansim shall possess seat to back recline ratio of 3:7or more.Tension GM CABIN Each 2 23718 47436

adjustment knob shall be provided under seat. The Gas Lift used shall be class 4 or more tested as per ANSI BIFMA standards. Nylon Base

to be provied. Twin castors 60 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017 standards.The Back, Armrest and pedestal

shall be provided in same Grey colour.Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and tolerance

of 5% to be considered in pipe thickness & Pipe sizes.

Mid Back Chair: The overall size of Chair shall be height 1050 to 1170 +/-5 mm, Back Width 495 mm at Top and 385mm at bottom, Seat Each

Width 500 +/-5 mm, Seat Depth 390 to 450 +/-5 mm and Seat height 480mm to 600 mm +/-5mm range. And over all chair width should

be 690 +/-5mm and Overall chair depth should be 630 to 690 +/-5mm. Seat should be made up of foam pre moulded at 55 kg/m3

density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be upholstered with Polyester & viscose- 380 GLM,

Abrasion- > 45000 cycles. The chair shall be supplied with Lenear Mesh at the back & shall be provided With 290mm width. Adjustable

Lumbar Support full length of size 325 mm,105 mm height and 3mm thickness in contoured form can travel upto 30mm at the back . The

Chair should be provided with Synchro tilt Mechanism with Multi lock features. The mechanism shall allow 360 degree revolving feature

along with height adjustablility. chair shall have seat sliding mechanism.Three Way Adjustable Arms to be provied with height adjustment

GM CABIN button made of Delrin P 500 and arm height adjustability nob shall be provided under the armrest. The mechansim shall possess seat to

back recline ratio of 3:7.Tension adjustment knob shall be provided under seat. The Gas Lift used shall be class 4 tested as per ANSI GM CABIN 6 15044 90262

BIFMA standards. Nylon Base to be provied. Twin castors 60 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017

standards.The Back, Armrest and pedestal shall be provided in same Grey colour.Tolerance of +/- 5mm to be considered for product sizes

i.e Length, Depth & height and tolerance of 5% to be considered in pipe thickness & Pipe sizes.( The Colour Shade and design shall be as

per client requirement and selection image is just a reference Image )

Digitally signed by AMIT

Supplying and placing in position a modernist-design upholstered loral 2-seater lounge sofa with overall dimensions of (w)1350mm x (d)870mm x (h)710mm,

providing an approximate seating area of 1120 mm (w) × 570 mm (d). the internal framework shall be constructed from 12 mm thick, anti-termite-treated

plywood (tentatively grade 303 as per Indian standards for commercial, common, and moisture-proof plywood) with a controlled moisture content of less than

10–12% to ensure long-term structural stability and durability. the under-structure frame shall further incorporate 12 mm thick kiln-dried german steam beech

wood, selected for its superior strength and resistance to warping, thereby enhancing the overall durability of the sofa. the seating base is to be fitted with a

high-quality web suspension system that provides resilient support and ensures lasting seating comfort. all joints in the structure must be firmly bonded using

super bond adhesive and reinforced with star screws, wooden pins, and stapler pins to maintain long-term joint integrity under regular usage. the sofa design

features a panelled back and cushioned armrests to promote comfortable lounging, with the entire structure padded using high-resilience polyurethane (p.u.)

foam of 32 density. the seat shall include 40 mm thick stack foam, while the backrest and armrest cushioning shall also utilize 40 mm thick foam, all securely

fixed using adhesive super glue. the final foam assembly will be upholstered in premium yellow 54-pattern leatherette, selected for its premium feel, aesthetic

18 2 SEATER SOFA appeal, and ease of maintenance. the sofa shall be complemented by stylish sleek mild steel (ms) legs that have undergone the 11-tank powder coating GM CABIN eatch 2 88240 176481

process. this premium, multi-stage metal pre-treatment includes comprehensive cleaning, rinsing, and a crucial zinc phosphating step, which ensures the final

powder coat offers superior adhesion, exceptional durability, and maximum corrosion resistance for a high-quality, long-lasting product.The product should

have BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1 Certification, GRIHA

Certification, FSC Certification. The product should be as per above given specification under theguidance of project architect & Engineer in

charge.Dimension(W)1350mm X (D)870mm X (H)710mm ( The Colour Shade and design shall be as per client requirement and selection image is just a

reference Image )

Providing & fixing of The Main table shall be of size 2000 L x 800 D x 760 & Side table size shall be 1600 L x 550 D x 660 H. The worksurface of the main table shall

be made up of 38mm thick E1 grade particle board with melamine finish with reverse water fall edges. Tabletop corner shall be round. The modesty panel of

the main table 400mm height shall be made up of 18mm thick Pre-laminate particle board with edges shall be duly finished. The modesty panel shall be

connected through L-shape Bracket connector. The worktop shall be connected with the gable end with the help of aluminum corner shall have overall size

of 800 L x 49 W x 45 H. Size of gable end at the Top 800 width to connect the Aluminium corner and the bottom with 640mm width. Side unit - Side table shall be

size 1600 L x 550 D x 660 H with 16mm thick E1 grade particle board with melamine finish with 2mm pvc edge bending on automatic machine. Fixed side return

with 2 drawers, single swing door, open shelf and open space for CPU, with holes for customer put their sockets. Fixed side return shall have flexibility to be

placed left or right during time of first assembly. All the Drawer and shutters shall be operated by finger grove with the help of V shaped aluminium extrustion

Consultant on the top of Drawer and shutter facia shall have overall size of 20 L x 34 H x 1.5mm thick. Above the table top shall Aluminium flipup shall be provided for easy consultant

Cabin Table wire access. The switch socket provision shall be provided below the table top at side unit. Back Unit : The overall size of Low height storage shall be 1800 x 450 cabin

x 750 (WDH) mm. Top shall be made up of 18mm thick pre laminated particle board E1 norms and Back shall be made up of 9 mm thick pre laminated particle

board with 2mm PVC edge lipping, Shutters shall be made up of 18 mm thick pre laminated particle board. Shutters to be provied for compartment. The

storage shall have adjustable shelf. Edge: All exposed shall be sealed with 2mm thick PVC edge lipping. The hinged doors top shall be provided with finger

groove handle-less design for a streamlined look. Finger gAroove shall be created by providing a reverse tapered profile edge of 6mm straight surface & 12

mm tapered towards inside @ 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Cam Lock faciltity should be provided

for safe storage of documents. ( The Colour Shade and design shall be as per client requirement and selection image is just a reference Image )

Providing & fixing of The overall size of the table shall be 1050 L x 525 D x 450 H mm. The top surface of the table shall be in boat shape design having maximum

size at the middle & lesser at the ends to form this unique shape. The table top shall be made up of 18mm thick Prelaminated particle board of E1 norms. The

edges shall be sealed properly with 2mm thick PVC edge banding on automatic machine. The understructure of the table shall be made from solid wood i.e

properly treated & seasoned kiln dried beach wood, finished with clear synthetic PU coating for the best resilence and high durability. The legs and the frame

shall be joined together by method of tenon and mortise for durability and better aesthetics. Four legs shall be provided and the cross section of leg at the

24 CENTER TABLE GM CABIN eatch 2 13136 26272

bottom shall be 35x35 and top shall be 55x35 provided in tappered finish for better looks. The outer side of the legs shall be rounded & inner side shall be corner

edges. The wooden frame shall be of size 55mm x 22mm thick with visible face of 55 mm front and 22mm shall be below the table top running at all four ends

as well as one support in the middle. ( The Colour Shade and design shall be as per client requirement and selection image is just a reference Image )

then edges sealed with 2mm thick PVC Lipping on automatic machine. Leg: shall be made up of high pressure aluminum die casted 20 degree tapered,

number “7” shape & oblong cross section of about 55mm on top, 45mm at bottom and of 725mm length to get 750mm table height, it acts as vertical

structural support member, connected by a horizontal cross beams 50x25x1.6thk (16g) ERW tube & connected to the Aluminium diecast vertical legs through a

high pressure Aluminium diecast 90deg – 02 way connectors. The connector should have “V” / “U” shape tapered groove for sliding a Aluminium diecast slider

nut. The slider nut shall be an Aluminium diecast part that has same taper as of “V” / “U” shape in the diecast connector. Modesty Panel: 18mm thk pre lam

board with 2mm PVC edge lipping of 450mm Ht. Wire Management: 350mm Aluminium Flip Up and provision to mount swicthes and sockets on PVC cable

dump and Vertical wire entry cover. Cross Beam: Leg to Leg shall be connected using cross beams made from 50x25x1.60mm (16g) Rectangular tube and to

give floating look & to connect the table top with cross beams injection moulded polycarbonate spacers should be used of dia 61mm x 42.50mm H insert

moulded with M6x1P zinc blue plated bolt of 22mm L.Spacer height including bolt should be 64.50mm. Side Composite Storage (Openable Shutter +2D+1F)

Top & Sides : 18mm Thk pre laminated particle board Back E1 norms: 9mm Thk pre laminated particle board Shutters : 18mm Thk pre laminated particle board

26 CABIN TABLE Handle. Handless Finger groove shall be created on top edge of shutter doors by providing a reverse tapered profile edge of 6mm straight surface & 12 mm CABIN eatch 3 76942 230826

tapered towards inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Suitable number lock shall be provided.

Digitally signed by AMIT

The overall size of Chair shall be height 1210 to 1330 +/-5 mm, Back Width 495 mm at Top, 385mm at bottom and 380mm at the lumber.

Seat Width 500 +/-5 mm, Seat Depth 490 to 550 +/-5 mm and Seat height 480mm to 600 mm +/-5mm range. And over all chair width

should be 690 +/-5mm and Overall chair depth should be 630 to 690 +/-5mm. Seat should be made up of foam pre moulded at 55 kg/m3

density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be upholstered with Polyester & viscose- 380 GLM,

Abrasion- > 45000 cycles. The chair shall be supplied with Lenear Mesh at the back & shall be provided With 290mm width, 180mm height

Headrest. Adjustable Lumbar Support full length of size 325 mm,105 mm height and 3mm thickness in contoured form can travel upto

30mm at the back . The Chair should be provided with Synchro tilt Mechanism with Multi lock features. The mechanism shall allow 360

degree revolving feature along with height adjustablility. chair shall have seat sliding mechanism.Three Way Adjustable Arms to be

Cabin HB provied with height adjustment button made of Delrin P 500 and arm height adjustability nob shall be provided under the armrest. The

27 mechansim shall possess seat to back recline ratio of 3:7.Tension adjustment knob shall be provided under seat. The Gas Lift used shall be CABIN eatch 6 23718 142308

class 4 tested as per ANSI BIFMA standards. Nylon Base to be provied. Twin castors 60 mm dia with PA6 material complying to ANSI/

BIFMA X 5.1 2017 standards.The Back, Armrest and pedestal shall be provided in same Grey colour.Tolerance of +/- 5mm to be

considered for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe thickness & Pipe sizes. ( The Colour

Shade and design shall be as per client requirement and selection image is just a reference Image )

The overall size of Chair shall be width 600 +/-5mm, depth 640 +/-5mm. Total height shall be 980 to 1080 +/-5 mm, Back Width 425 mm at Top and 500mm at

bottom, Seat Width 500 +/-5 mm, Seat Depth 470+/-5 mm and Seat height 470mm to 570 mm +/-5mm range. Seat shall be made up of foam pre moulded at

55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be uplhostered with micro fabric 100% polyster 180 GSM abrasion >

50000 cycles. Fire rated fabric confirming to BS EN 1021 (match) should be used. The chair shall be supplied with Mesh Back rest. The back frame shall be made

up of Injection molded PPGF 20% in light grey shade, armest support also in light grey shade. PPGF Frame thickness shall be minimum 4.8mm. Adjustable

Lumbar Support made up of PU having size 365 mm x 110 mm x 25mm thick shall be provided for better comfort. Lumbar Support material Integrated one-

piece Molded PU. The Chair should be provided with Self Calibrating Multilock Mechanism (Bio Snchyro mechansim) that should adjust the tension of the back

sensing weight of the user. The mechanism shall allow 360 degree revolving feature along with height adjustablility. The OEM shall have prevalent quality

cabin MB certifications like ISO 9001, ISO 14001, ISO 45001, ISO 50001, BIFMA Level-2 for 5 or more furniture products, India Design Mark for 5 or more products, BIFMA

28 Compliant for 25 or more furniture products, IGBC Gold rated factory certification & Griha Certification . One Way Adjustable Arms (Height) to be provied with CABIN eatch 12 15044 180523

height adjustment button of size 73mm x 18mm made of Delrin P 500. Armrest Height shall be 170mm to 260mm adjustable from Seat The mechansim shall

possess seat to back recline ratio of 3:7. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Metal base shall be provided of light grey color

matching the chair back & armrest.The base shall be made up of mild steel powder coated in grey shade to match the entire grey theme of chair.Metal base

powder coated made up of sheet thickness 2mm.Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and tolerance of 5% to

be considered in pipe thickness & Pipe sizes. ( The Colour Shade and design shall be as per client requirement and selection image is just a reference Image )

The overall size of Conference Table shall be 9000LX1500X750Hmm .The main worktop size shall be made of 36mm thick pre laminate partical boards with E1

norms dully finish with 2mm pvc edge band all the side of worktop.Modesty shall be made of 18mm thick pre laminate partical boards with E1 norms with

2mm pvc edge band all the visible side .The OEM shall have prevalent quality certifications like ISO 9001, ISO 14001, ISO 45001, ISO 50001, BIFMA Level-2 for 5 or

more furniture products, India Design Mark for 5 or more products, BIFMA Compliant for 25 or more furniture products, IGBC Gold rated factory certification &

Griha Certification . The Height of the modesty shall be 450H mm.And the gable end shall be made of 25mm thick pre laminate partical boards with E1 norms

BOARD ROOM BOARD

29 dully finish with 2mm pvc edge band all the side.Wire Management: 450mm aluminium flip up, provision to mount switchesand sockets on PVC cable dump eatch 1 210775 210775

and Vertical wire entry cover for wire uptake from floor to cable dump. ( The Colour Shade and design shall be as per client requirement and selection image

is just a reference Image )

The overall size of the Mesh High back executive chair(Grey) shall be, Overall height- 1300mm to 1380mm (+/- 5mm), seat depth

510mm(+/- 5mm) and seat width 450mm(+/- 5mm). The chair height shall be 500mm to 560mm(+/- 5mm). The chair Seat, Back and

Headrest shall be provided in Grey mesh. The chair shall have 2D headrest with height & angle adjustment. The chair shall have height

adjustable backrest with tension adjustable 6D flexible lumbar support. The chair shall have Floating drift recline mechanism with glass

fiber offers more smooth tilt & effective recline tension adjustment. The chair shall have Single lever control for seat height, seat depth,

BOARD back recline (segment locking) adjustments.The chair shall have 5D armrest with arm angle, height, depth, width and tilt-up adjustments. BOARD

ROOM HB The Chair should be allowing 360 degree revolving movement along with height adjustablility & tilt tension.The Gas Lift used shall be class Each 1 100706 100706

CHAIR 4 tested as per ANSI BIFMA standards. Aluminium die cast pedestal having length of prongs 310 mm with 50 mm height towards centre

& 25 mm height outside. Twin wheel castors to be provided. Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth &

height and tolerance of 5% to be considered in pipe thickness & Pipe sizes. ( The Colour Shade and design shall be as per client

requirement and selection image is just a reference Image )

Digitally signed by AMIT

The overall size of Chair shall be width 600 +/-5mm, depth 640 +/-5mm. Total height shall be 980 to 1080 +/-5 mm, Back Width 425 mm at Top and 500mm at

bottom, Seat Width 500 +/-5 mm, Seat Depth 470+/-5 mm and Seat height 470mm to 570 mm +/-5mm range. Seat shall be made up of foam pre moulded at

55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be uplhostered with micro fabric 100% polyster 180 GSM abrasion >

50000 cycles. Fire rated fabric confirming to BS EN 1021 (match) should be used. The chair shall be supplied with Mesh Back rest. The back frame shall be made

up of Injection molded PPGF 20% in light grey shade, armest support also in light grey shade. PPGF Frame thickness shall be minimum 4.8mm. Adjustable

Lumbar Support made up of PU having size 365 mm x 110 mm x 25mm thick shall be provided for better comfort. Lumbar Support material Integrated one-

BOARD piece Molded PU. The Chair should be provided with Self Calibrating Multilock Mechanism (Bio Snchyro mechansim) that should adjust the tension of the back Board

ROOM MB sensing weight of the user. The mechanism shall allow 360 degree revolving feature along with height adjustablility. One Way Adjustable Arms (Height) to be Each 24 15044 361046

CHAIR provied with height adjustment button of size 73mm x 18mm made of Delrin P 500. Armrest Height shall be 170mm to 260mm adjustable from Seat The

mechansim shall possess seat to back recline ratio of 3:7. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Metal base shall be provided of

light grey color matching the chair back & armrest.The base shall be made up of mild steel powder coated in grey shade to match the entire grey theme of

chair.Metal base powder coated made up of sheet thickness 2mm.Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and

tolerance of 5% to be considered in pipe thickness & Pipe sizes.

lasting seating comfort. All joints in the structure must be firmly bonded using super bond adhesive and reinforced with star screws, wooden pins, and stapler

pins to maintain long-term joint integrity under regular usage. The sofa design features a panelled back and cushioned armrests to promote comfortable

lounging, with the entire structure padded using high-resilience polyurethane (p.u.) foam of 32 density. The seat shall include 40 mm thick stack foam, while the

backrest and armrest cushioning shall also utilize 40 mm thick foam, all securely fixed using adhesive super glue. The final foam assembly will be upholstered in

premium burgundy-pattern leatherette, selected for its premium feel, aesthetic appeal, and ease of maintenance. Completing the design, the sofa will

feature a sleek polished base frame paired with solid wood legs that have undergone a borate-based liquid treatment or a protective wood finishing process.

3 seater This premium multi-stage treatment ensures superior adhesion, exceptional durability, and maximum corrosion resistance, resulting in a high-quality, elegant, BOARD

and long-lasting product suitable for modern interiors.The product shouldhave BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Each 5 138768 693840

Certification, AIOTA

Certification, BIFMA LEVEL-1 Certification, GRIHA Certification, FSC Certification. The product should

be as per above given specification under theguidance of project architect & Engineer in charge. The Colour Has to be coustmised as per the Client is

required Selection

Supplying and placing in position a modernist-design upholstered loral 3-seater lounge sofa with overall dimensions of (w)1965mm x (d)870mm x (h)710mm,

providing an approximate seating area of 1710 mm (w) × 570 mm (d). the internal framework shall be constructed from 12 mm thick, anti-termite-treated

plywood (tentatively grade 303 as per indian standards for commercial, common, and moisture-proof plywood) with a controlled moisture content of less than

10–12% to ensure long-term structural stability and durability. the under-structure frame shall further incorporate 12 mm thick kiln-dried german steam beech

wood, selected for its superior strength and resistance to warping, thereby enhancing the overall durability of the sofa. the seating base is to be fitted with a

high-quality web suspension system that provides resilient support and ensures lasting seating comfort. all joints in the structure must be firmly bonded using

2 SEATER super bond adhesive and reinforced with star screws, wooden pins, and stapler pins to maintain long-term joint integrity under regular usage. the sofa design BOARD

features a panelled back and cushioned armrests to promote comfortable lounging, with the entire structure padded using high-resilience polyurethane (p.u.) 1 111357 111357

foam of 32 density. the seat shall include 40 mm thick stack foam, while the backrest and armrest cushioning shall also utilize 40 mm thick foam, all securely

fixed using adhesive super glue. the final foam assembly will be upholstered in premium yellow 54-pattern leatherette, selected for its premium feel, aesthetic

appeal, and ease of maintenance. the sofa shall be complemented by stylish sleek mild steel (ms) legs that have undergone the 11-tank powder coating

process. this premium, multi-stage metal pre-treatment includes comprehensive cleaning, rinsing, and a crucial zinc phosphating step, which ensures the final

powder coat offers superior adhesion, exceptional durability, and maximum corrosion resistance for a high-quality, long-lasting product.The product

shouldhave BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1 Certification,

GRIHA Certification,

Providing FSC overall

& fixing of The Certification. The product should

size of Conference be as

Table shall beper above given specification

2900LX1200X750Hmm .The main under theguidance

worktop size shall of

made ofarchitect & Engineer

36mm thick in charge.

MEETING partical boards with E1 norms dully finish with 2mm pvc edge band all the side of worktop.Modesty shall be made of 18mm thick pre laminate partical boards

ROOM TABLE with E1 norms with 2mm pvc edge band all the visible side .The Height of the modesty shall be 450H mm.And the gable end shall be made of 25mm thick pre MEETING

29 laminate partical boards with E1 norms dully finish with 2mm pvc edge band all the side.Wire Management: 450mm aluminium flip up, provision to mount eatch 1 92807 92807

attached With ROOM

CMD Cabin switchesand sockets on PVC cable dump and Vertical wire entry cover for wire uptake from floor to cable dump. ( The Colour Shade and design shall be as

per client requirement and selection image is just a reference Image )

High Back Chair (Leatherite)

High back Chair having overall height 1200-1300mm, back height of 790 mm from seat level and width of 460 mm from top & 520 from

mid (lumbar) level. Seat Depth shall be 490 mm and adjustable upto 530mm. seat width shall be 520 mm measured at centre of the seat.

Seat height shall range between 430 mm to 520 mm. Armest shall be finished with foam & leatherite on the top & the structure of the

armrest shall a die cast aluminium with buffed finish & fixed with the seat below. The length of the top of the arm shall be 250 mm & width

Meeting HB of 60 mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS MEETING

3400. Seat, back & headrest shall be upholstered with Leatherette 75% PVC & 25% polyester – 640 GSM, Abrasion-100000 cycles over nos 1 25817 25817

PU foam. The synchro mechanism shall be provided having 3 position multilocking & seat adjustable on the left hand side and height

adjustment on the right hand side of the user.The mechanism shall allow 360 degree revolving feature along with height adjustablility.

Aluminium die cast pedestal having length 5 twin 60 mm wheel castors heavy duty shall be provided. The Gas Lift used shall be class 4

tested as per ANSI BIFMA standards. tolerance of 25mm for seat & back size to be considered. ( The Colour Shade and design shall be as

per client requirement and selection image is just a reference Image )

Digitally signed by AMIT

Medium Back Chair (Leatherite)

Medium back Chair having overall height 1050-1150mm, back height of 590 mm from seat level and width of 460 mm from top & 520

from mid (lumbar) level. Seat Depth shall be 490 mm and adjustable upto 530mm. seat width shall be 520 mm measured at centre of the

seat. Seat height shall range between 430 mm to 520 mm. Armest shall be finished with foam & leatherite on the top & the structure of

the armrest shall a die cast aluminium with buffed finish & fixed with the seat below. The length of the top of the arm shall be 250 mm &

width of 60 mm.Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to

Meeting MB IS 3400. Seat and back shall be upholstered with Leatherette 75% PVC & 25% polyester – 640 GSM, Abrasion-100000 cycles over PU Meeting

faom. The synchro mechanism shall be provided having 3 position multilocking & seat adjustable on the left hand side and height nos 8 22371 178967

adjustment on the right hand side of the user.The mechanism shall allow 360 degree revolving feature along with height adjustablility.

Aluminium die cast pedestal having length 5 twin 60 mm wheel castors heavy duty shall be provided. The Gas Lift used shall be class 4

tested as per ANSI BIFMA standards. tolerance of 25mm for seat & back size to be considered. ( The Colour Shade and design shall be as

per client requirement and selection image is just a reference Image )

Providing & fixing of The overall size of the Centre table shall be dia 600mm, 450 mm height. the table top shall be made up of 18mm thick prelaminated

particle board of approved shade All the edges of discussion surface shall be provided with machine pressed 2mm thick PVC lipping glued with hotmelt Eva

glue free from any VOC. Under Structure Support: Table top shall be supported on CRCA legs duly powder coated. The table understructure should be BOARD

33 SIDE TABLE provided with 32mm by 1.6mm thickenss swaged tube from 32mm top and 19mm bottom. The edges of the table top shall be rounded & edges shall not be eatch 2 7732 15465

sharp. The legs shall be in angular design & thicker on the top & thinner on the bottom side.( The Colour Shade and design shall be as per client requirement

and selection image is just a reference Image )

The overall size of the meeting Table shall be 1800LX900X750Hmm .The worksurface of the table shall be made up of 25mm thick Pre-laminate particle board

as per E1 norms and its edges duly sealed with 2mm PVC Lipping on automatic machine at visible sides. Two Long sides of the work surface shall be provided

with reverse tapered edge design created by chamfering the board at 45 degree inside for 17mm length & keeping 8mm straight & then edges sealed with

2mm thick PVC Lipping on automatic machine. Leg: shall be made up of high pressure aluminum die casted 20 degree tapered, number “7” shape & oblong

cross section of about 55mm on top, 45mm at bottom and of 725mm length to get 750mm table height, it shall acts as vertical structural support member,

34 MEETING TABLE connected by a horizontal cross beams 50x25x1.6thk (16g) ERW tube & connected to the Aluminium diecast vertical legs through a high pressure Aluminium eatch 1 36214 36214

diecast 90deg – 02 way connectors. Wire Management: 450mm Aluminium Flip Up and provision to mount swicthes and sockets on PVC cable dump and

Vertical wire entry cover made up of steel sheets. ( The Colour Shade and design shall be as per client requirement and selection image is just a reference

The overall size of Chair shall be width 600 +/-5mm, depth 640 +/-5mm. Total height shall be 980 to 1080 +/-5 mm, Back Width 425 mm at Top and 500mm at

bottom, Seat Width 500 +/-5 mm, Seat Depth 470+/-5 mm and Seat height 470mm to 570 mm +/-5mm range. Seat shall be made up of foam pre moulded at

55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be uplhostered with micro fabric 100% polyster 180 GSM abrasion >

50000 cycles. Fire rated fabric confirming to BS EN 1021 (match) should be used. The chair shall be supplied with Mesh Back rest. The back frame shall be made

up of Injection molded PPGF 20% in light grey shade, armest support also in light grey shade. PPGF Frame thickness shall be minimum 4.8mm. Adjustable

Lumbar Support made up of PU having size 365 mm x 110 mm x 25mm thick shall be provided for better comfort. Lumbar Support material Integrated one-

piece Molded PU. The Chair should be provided with Self Calibrating Multilock Mechanism (Bio Snchyro mechansim) that should adjust the tension of the back

sensing weight of the user. The mechanism shall allow 360 degree revolving feature along with height adjustablility. . One Way Adjustable Arms (Height) to be

37 Meeting Chair WKS eatch 4 15044 60174

provied with height adjustment button of size 73mm x 18mm made of Delrin P 500. Armrest Height shall be 170mm to 260mm adjustable from Seat The

mechansim shall possess seat to back recline ratio of 3:7. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Metal base shall be provided of

light grey color matching the chair back & armrest.The base shall be made up of mild steel powder coated in grey shade to match the entire grey theme of

chair.Metal base powder coated made up of sheet thickness 2mm.Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and

tolerance of 5% to be considered in pipe thickness & Pipe sizes. ( The Colour Shade and design shall be as per client requirement and selection image is just a

reference Image )

The Overall size of the L shape workstation shall be 1500-1500LX600DX750/1200H. workstations of overall panel thickness 65 mm (+/-5mm) and height of 1200mm

(+/- 5mm). The worktop shall be made up of 25mm E1 norm PLPB with matching PVC edge band 2mm thick. The worktop shall be provided with 65mm gromet

cut & shall be supported on CRCA bracket with one side fixed on rectangular slot of frame vertical and other side to worksurface. The partition frame shall be

made up of nonferrous 6063 grade alum alloy confirming to DIN ISO-2768-1 & fabricated through weldless technology & fitted with pre moulded M8 levellers

zinc passivated for height adjustment. Frame shall have vertical & horizontal members, vertical channels have inbuilt groove with rectangular slots to fix

cantilever / gable end brackets. Frame to frame shall be attached through male/ female hook mechanism pressure die casted parts made in zinc alloy

Mazak5. Adequate ribs to be given in extrusion profiles having variable thicknesses of 1.10mm to 2.50mm for better durability. Frame to post shall be attached

by male/female hooks made up of 2mm thick CRCA material zinc passivated to 10-12 microns. Each frame shall be fitted with tiles, Fabric Tile shall be

provided at above of the table top, one writing board with one fabric magnetic tile shall be provided at front side and Prelaminated tile shall be provided at

below of the table top with skirting. male & female hooks, two end cap at top and bottom. Bottom caps shall be provided with leveller fixing arrangement. all

36 L SHAPE WKS caps shall be of aluminium ADC-12 pressure die cast. top trip shall be flat aluminium confirming to DIN ISO-2768-1. The data & power cables provision to be WKS eatch 6 45199 271192

given at different levels. skirting raceways shall be designed for snap fitting for data cables and for power cables raceway below worktop shall be provided.

Tiles of overall thickness 6mm thickness constructed out of PLPB E-1 norms upholstered with fabric or Laminated tile should be slide to the grooves provided in

aluminium frame vertically, two tiles on either side of the frame to complete the assembly. Mobile Drawer Unit : It shall be of size of 400 x 450 x 600 (WDH) mm

made up of 18mm thick Pre-laminate particle board as per E1 norms and its edges duly sealed with 2mm PVC Lipping on automatic machine at visible sides.

Drawer front & sides shall be made up of 18mm, back 9 mm thick pre laminated particle board of E1 grade with visible edges sealed with 2mm PVC edge

band. The drawer top surface shall be provided with finger groove handle-less design. Finger groove shall be created by providing a reverse tapered profile

edge of 6mm straight surface & 12 mm tapered towards inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine.

Suitable lock shall be provided. The axle pin shall be rust protected zinc passivated. ( The Colour Shade and design shall be as per client requirement and

selection image is just a reference Image )

Digitally signed by AMIT

The overall size of Chair shall be width 600 +/-5mm, depth 640 +/-5mm. Total height shall be 980 to 1080 +/-5 mm, Back Width 425 mm at Top and 500mm at

bottom, Seat Width 500 +/-5 mm, Seat Depth 470+/-5 mm and Seat height 470mm to 570 mm +/-5mm range. Seat shall be made up of foam pre moulded at

55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be uplhostered with micro fabric 100% polyster 180 GSM abrasion >

50000 cycles. Fire rated fabric confirming to BS EN 1021 (match) should be used. The chair shall be supplied with Mesh Back rest. The back frame shall be made

up of Injection molded PPGF 20% in light grey shade, armest support also in light grey shade. PPGF Frame thickness shall be minimum 4.8mm. Adjustable

Lumbar Support made up of PU having size 365 mm x 110 mm x 25mm thick shall be provided for better comfort. Lumbar Support material Integrated one-

piece Molded PU. The Chair should be provided with Self Calibrating Multilock Mechanism (Bio Snchyro mechansim) that should adjust the tension of the back

sensing weight of the user. The mechanism shall allow 360 degree revolving feature along with height adjustablility. . One Way Adjustable Arms (Height) to be

37 guard chair, WKS eatch 8 15044 120349

provied with height adjustment button of size 73mm x 18mm made of Delrin P 500. Armrest Height shall be 170mm to 260mm adjustable from Seat The

reception chair

mechansim shall possess seat to back recline ratio of 3:7. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Metal base shall be provided of

light grey color matching the chair back & armrest.The base shall be made up of mild steel powder coated in grey shade to match the entire grey theme of

chair.Metal base powder coated made up of sheet thickness 2mm.Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and

tolerance of 5% to be considered in pipe thickness & Pipe sizes.

Reception table : The overall size of the reception table shall be 1800 mm length, 750 mm depth & 1050 mm height. On the front side

both ends shall be provided with groove design strips to enhance the overall look. At the centre of the front side L shape surface shall be

provided fixed up with hinges to paste logo of the University. The entire table shall be made up of 25mm / 18mm thick pre laminated

particle board of E1 norms. Inside of table a working height shelf should be provided or height 750 mm to keep desktop/ laptop and

RECEPTION normal working with sitting. the edges of the visible surface shall be sealed with 2mm thick PVC lipping on automatic machine. Unless

39 RECEPTION eatch 1 108966 108966

TABLE specified tolerance of +/- 5mm to be considered for product dimensions Length, Depth & height and tolerance of 5% to be considered in

thickness & size of material & components used.( The Colour Shade and design shall be as per client requirement and selection image is

just a reference Image )

The overall size of workstation shall be 1500L x 600D x 750H.The worktop shall be made of 25mm thick pre laminate partical boards with

E1 norms dully finish with 2mm pvc edge band all the side of worktop. Modesty shall be made of 18mm thick pre laminate partical boards

with E1 norms with 2mm pvc edge band all the visible side and connected with 2 nos L-shape pressure aluminium die casted connector.

The height of the modesty shall be 450mm. The understructure will feature vertical legs made of 50 mm x 50 mm x 1.6 mm steel tubing,

while the horizontal frame will be constructed from 50 mm x 25 mm x 1.6 mm steel. A cross beam, sized 40 mm x 20 mm x 1.6 mm

across the length of the table, will be installed beneath the tabletop to provide additional support. This cross beam shall be connected on

both sides with pressure die cast connectors of 50 mm height, 70 mm width & 35 mm depth designed in a shape acting as spacer between

GUARD horizontal frame & worksurface.Wire Management: Grommet shall be provided for easy wire acces. Mobile Drawer Unit : It shall be of size GUARD

TABLE of 400 x 450 x 600 (WDH) mm made up of 18mm thick Pre-laminate particle board as per E1 norms and its edges duly sealed with 2mm TABLE

PVC Lipping on automatic machine at visible sides. Drawer front & sides shall be made up of 18mm, back 9 mm thick pre laminated

particle board of E1 grade with visible edges sealed with 2mm PVC edge band. The drawer side surface shall be provided with finger groove

handle-less design. Finger groove shall be created by providing a reverse tapered profile edge of 6mm straight surface & 12 mm tapered

towards inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Suitable lock shall be provided.

Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe thickness

& Pipe sizes ( The Colour Shade and design shall be as per client requirement and selection image is just a reference Image )

supplying and placing in position a modernist-design upholstered berry 2-seater lounge sofa with overall dimensions of (w)1410mm x

(d)890mm x (h)870mm, providing an approximate seating area of 900 mm (w) × 510 mm (d). the internal framework shall be

constructed from 12 mm thick, anti-termite-treated plywood (tentatively grade 303 as per Indian standards for commercial, common, and

moisture-proof plywood) with a controlled moisture content of less than 10–12% to ensure long-term structural stability and durability. the

under-structure frame shall further incorporate 12 mm thick kiln-dried german steam beech wood, selected for its superior strength and

resistance to warping, thereby enhancing the overall durability of the sofa. the sofa seat base shall be fitted with a durable elastic strip

suspension system, consisting of high-tensile elastic webbing securely fastened to the internal frame. this system provides flexible support,

enhances seating comfort, and ensures long-term durability by evenly distributing weight and reducing pressure on the foam. the elastic

strips are arranged in a criss-cross pattern to maintain consistent tension and prevent sagging over time. all joints in the structure shall be

firmly bonded using super bond adhesive and reinforced with star screws, wooden pins, and stapler pins to maintain long-term joint RECEPTIO

2 SEATER integrity under regular usage. the sofa design features a panelled back and cushioned armrests to promote comfortable lounging, with the N each 3 89892 269677

SOFA entire structure padded using high-resilience polyurethane (p.u.) foam of 32 density. the seat shall include 40 mm thick stack foam, while WAITING

the backrest and armrest cushioning shall also utilize 40 mm thick foam, all securely fixed using adhesive super glue. the final foam

assembly shall be upholstered in premium black-pattern leatherette, selected for its premium feel, aesthetic appeal, and ease of

maintenance. completing the design, the sofa shall be supported by high-quality 3 inch pvc legs designed for durability and stable load-

bearing performance. the legs feature a smooth, uniform finish, are resistant to moisture, corrosion, and everyday wear, and provide a

lightweight yet sturdy support system suitable for long-term use. The product should have BIFMA COMPLIENT Certification, INDIAN

DESIGN MARK Certification, GREEN PRO Certification, AIOTA

Certification, BIFMA LEVEL-1 Certification, GRIHA Certification, FSC Certification. The product should

be as per above given specification under theguidance of project architect & Engineer in charge.Dimension:(w)1410mm x (d)890mm x

(h)870mm ( The Colour Shade and design shall be as per client requirement and selection image is just a reference Image )

Digitally signed by AMIT

Supplying and Placing in potision of Leatherette Sofa .sofa showcases curved arms and plush backrest perching on sleek metal legs.

Wrapped in breathable, family-friendly leatherette, it lets you enjoy worry-free every day. Sofa frame made of Kiln-dried solid wood

ensures durability. Breathable leatherette upholstery keeps your body cooler for longer. Sleek metal legs make the sofa airy and light. Soft

cushioned back and seat for comfortable seating. Curved padded arms add to your comfort. Decorative stitch details complement the

design. Anti-sag construction offers the right level of support for maximum comfort. Comfortable seat depth & height, designed for modern

Indian lifestyle. Sofa frame made of Kiln-dried solid wood ensures durability

Breathable leatherette upholstery keeps your body cooler for longerSleek metal legs make the sofa airy and lightSoft cushioned back and

single seat for comfortable seating Curved padded arms add to your comfort Decorative stitch details complement the designAnti-sag

SEATER construction offers the right level of support for maximum comfort.Comfortable seat depth & height, designed for modern Indian lifestyle. waiting each 2 95816 191632

SOFA The product should be from manufacturer(OEM) which have BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN

PRO Certification, AIOTA Certification, BIFMA LEVEL-1 Certification, GRIHA Certification, FSC Certification. The product should be as per

above given specification under theguidance of project architect & Engineer in charge. ( The Colour Shade and design shall be as per

client requirement and selection image is just a reference Image )

The overall size fo the Lounge Chair shall be 610WX590DX810H. The Lounge chair shall be comes with Single Moulded Foam design Including Seat,back with

Aremrest. The height of the seat 460mm from the ground, seat width shall be 410mm and the Depth of the seat shall be 420mm, Similarly the back width shall

be 320mm at bottom and 410mm at top and the Height shall be 380mm from the seat. The chair seat, back & armrest shall be made up of single Foam

moulded design. Armrest shall be comes with tapered design with maximum height at back with minimum height at front. The seat, back & armrest shall be

made up of PU molded foam with desired support structure and upholstered with fine fabric , The fabric used for upholstery is 450 glm, has abrasion resistance

more than 50K rubs, colour fastness to light better than 5, colour fastness to rubbing 4-5, high quality polyester fabric to offer the best feel & comfort. The

40 LOUNGE CHAIR Moulded shell comes with back and armrest thickness of 50-55mm and the seat comes with 60-65mm of thickness.. The understructure of the chair shall be WAITING eatch 6 19040 114241

made up of ERW round tapered 4 legs of size upper Ø32mm and the bottom Ø20mm.This Tapered leg design aesthetically appealing. The legs shall be joined

with each other with the help of the ERW rectangular Tube of size 40x20mm for better durability on which the seat & back shell is fixed. Leg shoe shall be

provided. Understructure shall powder coated upto 40 to 60microns. ( The Colour Shade and design shall be as per client requirement and selection image is

just a reference Image )

Centre table Size

The overall size of the Centre table shall be 1050 mm Length x 525 mm depth, 450 mm height. the table top shall be made up of 18mm thick prelaminated

particle board of approved shade All the edges of discussion surface shall be provided with machine pressed 2mm thick PVC lipping glued with hotmelt Eva

glue free from any VOC. Under Structure Support: Table top shall be supported on CRCA legs duly powder coated. The understructure should be provided with

41 CENTER TABLE 32mm by 1.6mm thickenss swaged tube from 32mm top and 19mm bottom. The edges of the table top shall be rounded & edges shall not be sharp. The legs WAITING eatch 3 8959 26876

shall be in angular design & thicker on the top & thinner on the boattom side. ( The Colour Shade and design shall be as per client requirement and selection

image is just a reference Image )

The overall size of the Centre table shall be dia 600mm, 450 mm height. the table top shall be made up of 18mm thick prelaminated particle board of

approved shade All the edges of discussion surface shall be provided with machine pressed 2mm thick PVC lipping glued with hotmelt Eva glue free from any

VOC. Under Structure Support: Table top shall be supported on CRCA legs duly powder coated. The OEM shall have prevalent quality certifications like ISO

42 SIDE TABLE 9001, ISO 14001, ISO 45001, ISO 50001, BIFMA Level-2 for 5 or more furniture products, India Design Mark for 5 or more products, BIFMA Compliant for 25 or more WAITING eatch 3 7732 23197

furniture products, IGBC Gold rated factory certification & Griha Certification .The table understructure should be provided with 32mm by 1.6mm thickenss

swaged tube from 32mm top and 19mm bottom. The edges of the table top shall be rounded & edges shall not be sharp. The legs shall be in angular design &

thicker on the top & thinner on the bottom side. ( The Colour Shade and design shall be as per client requirement and selection image is just a reference

Designed for neck alignment and long-hour support. Nylon frame with mesh to keep your back pressure-free and cool ,Buil In Lumbar Maasager -Targeted

kneading massage + heating function in the lumbar region to relieve strain and stiffness, Soft contoured pads move up, down, forward & backward for added

support(7D adjustable arm rest). SMart Grid+ Foam Seat -For even weight distribution, coolness and pressure-free sitting. Multi Lock recline mEchnaism-Sit, relax

& work with 90-135° recline mechanism and 3-point lock system.Class-IV Samhongsa gas lift - Long-lasting BIFMA certified gaslift, tested for 250 kgs load. Meeting

Massager Chair Chrome Wheel Base. Warranty: 3-year warranty on tilt mechanism, hydraulic gas lift, wheelbase, armrest mechanism Overall Dimensions (LxWxH): 46 x 65 x 120- Each 1 26679 26679

Minimum Seat Height: 43 cms

Maximum Seat Height: 53 cms . Construction:

Basic Total 6,783,532

Digitally signed by AMIT

S.H. 9 CIVIL & INTERIOR WORK: SAGARMALA FINANCE CORPORATION LTD., NEW DELHI. ESTIMATE

S.NO DSR Ref. No. DESCRIPTION OF ITEM

UNIT DSR RATE NDSR Rate DSR AMOUNT NDSR AMOUNT

1 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of cum 8.00 6347.75 50,782.00 0.00

centering and shuttering - All work up to plinth level :

1.1 4.1.5A 1:3:6 (1 Cement : 3 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 0.00 0.00

6 graded stone aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA)).

2 IPS FLOORING 0.00 0.00

2.1 11.4 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm sqm 25.00 978.45 24,461.25 0.00

thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement

hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening

compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This

includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

B FLOORING 0.00 0.00

B.1 VITRIFIED TILE 0.00 0.00

11.49 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the 0.00 0.00

manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of

approved brand & manufacturer, in all colours and shade, laid with cement based high

polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6

mm thickness, including grouting of joints (Payment for grouting of joints to be made

11.48 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 0.00 0.00

kg of organic coated filler of desired shade(0.10 kg of hardener and 0.20 kg of resin per kg),

including filling/grouting and finishing complete as per direction of Engineer-in-charge.

B.2 CARPET TILE FLOORING 0.00 0.00

Providing & fixing of Tufted / Textured / Graphic Loop Pile Carpet Tile flooring of approved 0.00 0.00

make & shade for Medium- Heavy duty Commercial applications, having pile height of

9mm, tufted Weight of 24-26 oz/yd2, average density >7,000 oz/yd3 , 100% Solution Dyed, 8.0

Stitches per Inch, 0.112 in Finished Pile Thickness, Primary Backing of non-woven Environment

friendly, Recyclable, PVC Free, with high recycled content material. Fiberglass Reinforced

Thermoplastic Composite Secondary Backing containing not less than 39% post consumer

and/or post industrial material content, Soil Protection, Class I Radiant Panel confirming to

ASTM E 648, NBS Smoke < 450 confirming to ASTM E 662, Must pass both Part 2 and Part 3 of

AATCC 174 with a minimum of 90% reduction both gram negative and gram positive

bacteria and no macroscopic growth against the fungi., Built-in Permanent Conductive Fiber

Electrostatic Propensity of Less Than 3.5 kV, including covering of the laid carpet with 1mm.

Thk plastic sheets, with proper taping of the joints and shampooing of the carpet prior to

handover all complete as per the approved manufacturers specification and as per the

direction of Engineer-in-charge.

Digitally signed by AMIT

B.3 LAMINATED WOODEN FLOORING 0.00 0.00

Supplying and fixing of 10mm thk laminated wooden flooring. Tiles to be fixed on 6mm thk sqm 192.50 2,466.00 0.00 474,705.00

underlay. The floor should be cleaned before laying. Edges of tiles to be fixed with molding of

approved colour and design. To be fixed as per manufacturers specifications. AC V Grade,

B.4 ITALIAN MARBLE 0.00 0.00

11.51 Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in 0.00 0.00

required pattern in linear portion of the building all complete as per architectural drawings,

with 18 mm thick stone slab laid over 20mm (average) thick base of cement mortar 1:4 (1

cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including

pointing with white cement slurry admixed with pigment to match the marble shade

including rubbing, curing and polishing etc. all complete as specified and as directed by the

Engineer-in-Charge.

11.51.1 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc sqm 37.00 6603.35 244,323.95 0.00

5 FALSE RAISED FLOORING FOR SERVER ROOM 0.00 0.00

11.54 Providing and fixing removable raised/false access flooring with system and its components 0.00 0.00

of approved make for different plenum height with possible height adjustment upto 50 mm,

comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame

work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and

as directed by Engineer-in-charge consisting of:

(a) Providing at required spacing to form modular framework, pedestals made out of GI tube 0.00 0.00

of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base

plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head

of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with

two GI Check nuts screwed on the stud for level adjustment upto 50mm, locking and

stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to

the subfloor (base) through base plate using epoxy based adhesive of approved make or

the machine screw with rawl plug.

(b) Stringers system in all steel construction hot dipped galvanized of rectangular size 0.00 0.00

570x20x30x0.80mm thick having holes at both ends for securing the stringers on to the

pedestal head using fully threaded screws ensuring maximum lateral stability in all directions,

the grid formed by the pedestal and stringer assembly shall receive the floor panel, this

system shall provide adequate solid, rigid support for access floor panel, the system shall

provide a minimum clear uninterrupted clearance between the bottom of the floor for

electrical conduits

(c) Providing and Access

and fixing wiring etc. allpanel

Floor complete as per themm

of 600x600x32 architectural drawings,

medium grade asSteel anti

Filled 0.00 0.00

static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel

welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical

cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused

spot welded together (minimum 64 welds in each dome and 20 welds along each flange).

Digitally signed by AMIT

The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed 0.00 0.00

by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious

core mixed with lightweight foaming compound. The access floor shall be factory finished

with Anti-static High Pressure laminate with Non Warp technology upto 1mm thickness for

superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a

Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre

of the panel which is placed on four steel blocks. The panel will withstand and Uniformly

Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as

per the approved manufacturers specification and as per the direction of Engineer-in-

charge. All specification must be printed on the side of the panel to ensure the quality of the

B.5.a 11.54.1 product.

300MM FINISHED FLOOR HEIGHT (FFH). sqm 18.00 5623.95 101,231.10 0.00

C FALSE CEILING WORK 0.00 0.00

GYPSUM BOARD CEILING 0.00 0.00

C.1 12.52 Providing and fixing false ceiling at all height including providing and fixing of frame work 0.00 0.00

made of special sections, power pressed from M.S. sheets and galvanized with zinc coating

of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25

mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre,

one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia

bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length

with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I.

channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the

ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each

having lips of 10.5 mm, at 450 mm centre to centre,

shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips 0.00 0.00

made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter

channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter

of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long

dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and

perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c,

including jointing and finishing to a flush finish of tapered and square edges of the board with

recommended jointing compound , jointing tapes , finishing with jointing compound in 3

layers covering upto 150 mm on both sides of joint and two coats of primer suitable for

board, all as per manufacturer's specification and also including the cost of making openings

for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed,

all complete as per drawings, specification and direction of the Engineer in Charge but

excluding the cost of painting with :

12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board sqm 385.00 1355.80 521,983.00 0.00

with BIS certification marks)

MINERAL FIBRE GRID CEILING 0.00 0.00

C.2 26.27 Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of 0.00 0.00

approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%,

Light Reflectance > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as

per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all

round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T

runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and

secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of

size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised @ 80

gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded

hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm,

Digitally signed by AMIT

spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery 0.00 0.00

walls /partitions with the help of GI perimeter wall angle of size 24x24X3000 mm made of 0.40

mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to

centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in

false ceiling support system shall be pre-painted with polyester baked paint, for all heights.

The work shall be carried out as per specifications, drawings and as per directions of the

engineer-incharge.

26.27.2 With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7) sqm 450.00 2671.20 1,202,040.00 0.00

D PARTITION 0.00 0.00

GYPSUM BOARD PARTITIONS 0.00 0.00

D.1 9.105 Poviding and fixing partition upto ceiling height consisting of G.I. frame and required board, 0.00 0.00

including providing and fixing of frame work made of special section power pressed/ roll

form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and

ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the

floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm

dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the

studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick

fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610

mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of

partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at

spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25

mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm

centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid

through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5

mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal

to metal flat head screws, including jointing and finishing to a flush finish with recommended

jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint

finisher and two coats of primer suitable for board as per manufacture's specification and

direction of engineer in charge all complete.

9.105.1 75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced sqm 50 2131.10 106,555.00 0.00

Gypsum (GRG) plaster board conforming to IS: 2095: (part 3) (Board with BIS certification

9.105.2 75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain sqm 400 1818.15 727,260.00 0.00

Gypsum plaster board conforming to IS: 2095: (part 1) : 2011 (Board with BIS certification

GLASS WOOL BETWEEN PARTITION (FOR 100 MM THK PARTITION) 0.00 0.00

D.2 MR Providing and fixing Glass wool insulation with Resin Bonded conforming to IS: 8183 having sqm 500.00 147.00 0.00 73,500.00

density 36 kg/m3, for 75mm thick partition wrapped in 200G Virgin Polythene Bags fixed to

wall with screw, rawel plug & washers and held in position by criss crossing GI wire etc.

complete as per directions of Engineer-in-Charge.

GYPSUM BOARD FOR 100 MM PARTITION 0.00 0.00

Digitally signed by AMIT

D.3 MR 12.5 mm Standard board (conforming to IS 2095 Part1 1996; BS 1230: Part1: 1985 for Gypsum sqm 300.00 1,096.00 0.00 328,800.00

Board Type 1 & BS EN 520: 2004 Type A) is screw fixed to metal system on both sides using

“type S” Boral Self tapping 3.5 x 25mm corrosion resistant drywall screws spaced at 200mm

centers on all joints and 300mm centers in the field of boards. Screw fixing is done

mechanically. Finally, boards and screw heads are to be jointed and finished so as to have a

flush look which includes filling tapered edge and square edges of board with Rapid Joint

Compound, Paper Tape (As per recommended practice). All perimeters and penetrations to

be sealed with Acrylic sealant as per manufacturer’s specifications.

12MM PLYWOOD 0.00 0.00

D.4 MR Providing and fixing 12mm thick commercial ply conforming to IS : 1328 type with necessary sqm 100.00 3,868.00 0.00 386,800.00

screws/nuts & bolts/ nails, including a coat of approved primer and anti-termite on one

face, and fixed on wooden / steel frame work, complete as per direction of Engineer-

incharge (Frame work shall be paid for separately).

4MM MDF SHEET 0.00 0.00

D.5 MR Providing and fixing of 4mm MDF sheet on existing plywood partition / panelling with 4mm sqm 100.00 286.00 0.00 28,600.00

wide grooves in approved pattern complete in all respects with adhesive and all accessories

as required.The grooves to be finished using paint of approves shade.

Demountable SINGLE GLAZED ACOUSTIC PARTITION 0.00 0.00

D.6 MR Supply & Installation of Single Glaze Partition with aluminium profile of Clip-on of size 30mm x sqm 90.00 9,560.00 0.00 860,400.00

21mm in Matt Black / Natural Alu finish. Profiles to be provided with suitable gaskets for

insertion of 10mm thick clear toughened glass. It consists of two-way Polycarbonate I

profiles, 90 Degree L Junction and T Junction profiles. Polycarbonate transparent profiles to

be provided on glass to glass joineries with double sided adhesive tape. Polycarbonate

profiles to be inserted in the joint to give continuity glass effect and suitable fasteners to be

used for fixing of profiles. Costs should be inclusive of necessary Hardware for fixing of profiles

& installation charges.

D.7 MR Supply & Installation of Stile Door with aluminium profile of frame size 82X40mm along with Nos. 21 65000 0.00 1,365,000.00

Door rebate 55x48mm with seals in matt black / natural anodized finish with aluminium

Hinges (4 No. minimum) & Lever Handle with Lock 35mm backset, oval escutcheons , strike

plate, EPC One Side Key other side knob-70mm and Exposed Door closer with Hold Open unit

along with 10mm toughened glass. Necessary seals to be provided all around the door

frames and drop down seal. Cost should be inclusive of installation charges for Doors. Size of

Door = 1200/1000x2400mm The Door should have standard make locking arrangment along

with the handles and other accessorcies all in complete

3M & EQUIVALENT SCOTCH PRINT CONTROLTAC & COMPLY WALL GRAPHICS 0.00 0.00

Digitally signed by AMIT

D.10 MR Providing & Fixing Digitally reproduced 3M & equivalent Scotch print decorative graphics on sqm 65.00 2,850.00 0.00 185,250.00

IJ180C (with controltac & comply feature for direct, bubble-free application on walls) with

UV protective matte over laminate 8520 with a polyethylene-coated paper liner. Customized

imagery & the thickness of 2 mil (0.05mm) without adhesive & 3-4mil (0.8-0.10mm) with

adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). the

adhesive should be Pressure activated, position able, with air release channels. MCS

warranty of 5yrs must be endorsed by 3M & equivalent India Limited Architectural Market

Application - WALL MURAL-Directly pasted on POP finish wall Conformable & durable

decorative graphics directly applied on walls, ceilings, elevator doors, partitions, pillars,

aluminum cladding etc.Note : Cost of approved image included.

E WALL FINISHING 0.00 0.00

LAMINATE 0.00 0.00

E.1 MR Providing and fixing 1mm thick Laminate(as approved) and with painted horizontal and sqm 120.00 1,563.00 0.00 187,560.00

vertical grooves to match colour of laminate (as approved), for plain lining / cladding with

surface as per drawings & directions of Engineer In Charge.

VENEER BOARD 0.00 0.00

E.2 MR Providing and fixing 4mm thick coir veneer board, ISI marked IS : 14842, plain lining with sqm 90.00 3,872.00 0.00 348,480.00

necessary screws, priming coat on unexposed surface etc., complete

ACOUSTIC WALL PANEL 0.00 0.00

E.3 MR Wall Panel produced from recycled and recyclable PET (approximately 60% post consumer sqm 45.00 5,164.00 0.00 232,380.00

waste sourced from recycled PET).The base fiber be certified to Oeko-tex Standard 100 for

meeting human ecological requirements. Certified by TEST ex Zurich, Swiss Textile Institute.

Enables dematerialization through thee lamination of combined fabric and wood panel

screens, partitions, tiles and other substrates. Strong focus on waste avoidance, resource

recovery and Product Stewardship. Extreme light weight allows diverse range of applications

without the need for structural support and/or substrates. Wall Panel is certified to carry the

Good Environmental Choice Australia label.

Available in sizes of 1200x2400x9mm thk, 1210x2700x9mm thk, 500x500x9mm thk. Avalilable in 0.00 0.00

many colors Grey / Dark Grey, Orange, Red, dark Grey etc.

CERAMIC GLAZED WALL TILE 0.00 0.00

E.4 MR Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to Sq.m 144.00 1,470.00 0.00 211,680.00

be specified by the manufacturer), of approved make, in all colours, shades except

burgundy, bottle green, black of size 600x300mm as approved by Engineer-in-Charge, in

skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement :

3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in

white cement mixed with pigment of matching shade complete.

E.5 PLASTER WORKS 0.00 0.00

E.5.a 13.1 12 mm cement plaster of mix : 0.00 0.00

Digitally signed by AMIT

E.6 PUTTY PUNNING 0.00 0.00

E.6.a 13.80 Providing and applying white cement based putty of average thickness 1mm of approved sqm 65.00 156.05 10,143.25 0.00

brand and manufacturer over the plastered wall surface to prepare the surface even and

smooth complete.

DIGITALLY PRINTED FILM ON GLASS AND DOOR PARTITION 0.00 0.00

E.7 MR Providing & Fixing 3M Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL- sqm 56.00 2,073.00 0.00 116,088.00

effect film to reproduce Sand-blasting effect on glass with customised designs, thickness of 2

mil (0.05mm) without adhesive & 3mil (0.8)with adhesive having minimum tensile strength of

3.5 pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of installation should be 4

pounds/inch (0.7 kg/cm) on Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if exposed to

direct sunlight) to 15yrs (indoors) must be endorsed by 3M India Limited Architectural Market

Department. Contractors payment wouldn't be released until & unless he/she produces

orginal warranty certificate from the manufacturer.

MR ROLLER BLINDS 0.00 0.00

E.8 Supplying and fixing Roller Blinds to the following specifications , Fabric shade as approved, sqm 189.00 2,044.00 0.00 386,316.00

sunscreen, dense basket weave 5 % openness factor. Operation: - Manual. Offset side-

mounted metal chain operated Mounting: Pocket mounted. Shade Orientation: Regular roll,

shade cloth falls at window side of roller. Configuration: Single band AVERAGE LENGTH OF

BLIND is 2.0 M to 2.5 M. The fabric to be Fire Retardent certified.

E.8a MR BLACKOUT ROLLER BLINDS 0.00 0.00

Supplying and fixing of Blackout blinds to the following specs. sqm 17.28 2,416.00 0.00 41,748.48

Black-out material fibre-glass coated fabric, 12 mils thick, 62 threads per sq in., 0.750 lbs per 0.00 0.00

sq in. (441g per sq mt.)

Operation: - Manual. Offset side-mounted metal chain operated 0.00 0.00

Mounting: Closure Box in metal 0.00 0.00

Shade Orientation: Regular roll, shade cloth falls at window side of roller 0.00 0.00

Configuration: Single band 0.00 0.00

The Fabric to be as per approved sample (Fabric should be Fire Retardent Certified). 0.00 0.00

WALL PAPER 0.00 0.00

E.10 MR Providing and fixing decorative wall paper on to partitions and wall etc. with approved sqm 35.00 1,726.00 0.00 60,410.00

adhesive over panelling in any shape, length etc. including preparing surfaces for wall paper

(rate to include wastage due to various sizes)

1) - Front vinyl and back is non voven

2) - washable 100%

4)- fire retardant

5)- moisture resistant

6)- ac controlling capacity

Marshall Factory series or equivalent

E.11 ACRYLIC EMULSION PAINT 0.00 0.00

13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile 0.00 0.00

Organic Compound ) content less than 50 grams/ litre. of approved brand and

manufacture, including applying additional coats wherever required to achieve even shade

Digitally signed by AMIT

E.12 13.68 French spirit polishing : 0.00 0.00

E.12.a 13.68.1 Two or more coats on new works including a coat of wood filler sqm 90.00 446.25 40,162.50 0.00

E.13 MR Providing and fixing 6 mm thick frameless toughened lacqure glass on existing partition/ sqm 15.00 7,546.00 0.00 113,190.00

coloums all complete as per Direction of Engineer-in-charge.

E.14 8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and 0.00 0.00

prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and

similar locations of required size,approved shade, colour and texture laid over 20 mm thick

base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed

with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing

to edges to give high gloss finish etc. complete at all levels.

E.14.a 8.2.2 Granite stone slab colour black, Cherry/Ruby red 0.00 0.00

F DOOR AND ACCESSIORES 0.00 0.00

F.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid 0.00 0.00

door/window/Clerestory windows & other Frames / Chowkhat comprising of virgin PVC polymer of K value 58-

60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non

toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with joints after applying PVC solvent

cement and screwed with full body threaded star headed SS screws having minimum frame density of 750

kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58

N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of

being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold

fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In-Charge. (M.S hold

fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door / window frames, minus

5mm tolerance in dimensions i.e. depth and width of profile shall be acceptable. Variation in profile dimensions

on plus side shall be acceptable but no extra payment on this account shall be made.

2HOURS FIRE RATED METAL DOOR 0.00 0.00

F.3 MR SITC of fire door of rating for 120 Minutes, Conforms to IS3614 (PART-2)1992, BS476 (PART 20 0.00 0.00

& 22) and ISO834.

Material: Door Frames and Leaves are made from Galvanized Steel 0.00 0.00

Door Leaves: Constructed from 1.0mm thick galvanized steel sheet formed to provide a 0.00 0.00

48mm thick fully flush, double skin door shell with seamless welding joint all around. The

internal construction of the door shall be specially designed with infill to give 2 hours fire

Infill: All the doors will have Honey Comb Crafted Paper or equivalent infill. 0.00 0.00

Door frame: Produced from 1.6mm galvanized steel sheet formed to single rebate profile of 0.00 0.00

size125mm x 57mm (+/- 0.3mm) with a maximum bending radius of 1.4mm. The necessary

fixing arrangements should be provided to mount the doorframes to the gypsum partition.

Vision Glass: 2 hours Fire Rated Vision Glass with 6mm thick clear glass in rectangular shape 0.00 0.00

dimensions of 200mm x 300mm to be fixed as per the given design.

Digitally signed by AMIT

Finish: The door frames and shutters are Zinc Phosphate with epoxy primer and finish with PU 0.00 0.00

All doors should have suitable locking mechanism with 3 keys each. 0.00 0.00

• Automatic door closures, Seals for Air Tightness and Automatic Door Bottoms should be 0.00 0.00

* Contractor shall obtain and submit certificate 0.00 0.00

F.3.a Single Shutter, width 1.2m, ht. 2.4m sqm 5.76 26,390.00 0.00 152,006.40

9.21 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non- 0.00 0.00

decorative type, core of block board construction with frame of 1st class hard wood and

well matched commercial 3 ply veneering with vertical grains or cross bands and face

veneers on both faces of shutters:

F.4.a 9.21.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 27.00 2,172.10 58,646.70 0.00

F.4 SITC OF FOLLOWING DOOR FITTINGS 0.00 0.00

F.4.a MR 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in SSS finish. Suitable for nos. 48.00 616.00 0.00 29,568.00

door weights upto 120kgs.

F.4.b MR 55mm backset, 20mm square forend prepared for euro profile cylinder including strike plate. nos. 12.00 4,872.00 0.00 58,464.00

and EPC 60mm Length both side key operation & Escutcheons in SSS Finish (278a Dead Lock

Type 1 Package)

F.4.c 14.40 Providing and fixing chromium plated brass butt hinges with necessary chromium plated 0.00 0.00

brass screws etc. complete.

F.4.e MR Providing and fixing OF 55mm backset, 20mm square forend prepared for euro profile nos. 12.00 4,872.00 0.00 58,464.00

cylinder including strike plate. and EPC 60mm Length both side key operation & Escutcheons

F.4.f 9.74 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. 0.00 0.00

F.4.h 9.76 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a nos. 12.00 854.65 10,255.80 0.00

pair of lever handles of approved quality with necessary screws etc. complete.

F.4.i 9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic door nos. 12.00 983.15 11,797.80 0.00

closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to

80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with

necessaryaccessories and screws etc. complete.

F.4.j 14.34 Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, nos. 12.00 271.45 3,257.40 0.00

necessary brass screws etc. to suit shutter thickness complete .

G DISMANTALING AND DISPOSAL OF EXISTING INTERIOR INFRASTRUCTURE 0.00 0.00

15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking material 0.00 0.00

within 50 metres lead.

G.1 15.23.2 For thickness of tiles above 25 mm and up to 40 mm SQM 65.00 113.35 7,367.75 0.00

G.2 MR Dismantaling of existing wooden flooring including stacking of serviceable material and SQM 0.00 149.00 0.00 0.00

disposal of unserviceable material within 50 metres lead.

Digitally signed by AMIT

G.3 MR Based Dismantling tile work in Wall dado laid in cement mortar including stacking material within 50 SQM 10.00 113.35 1,133.50

on 15.23.2 metres lead.

G.4 15.25 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable SQM 10.00 266.45 2,664.50 0.00

material and disposal of unserviceable material within 50 metres lead.

G.5 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster SQM 15.00 54.65 819.75 0.00

including disposal of rubbish to the dumping ground within 50 metres lead.

G.6 15.7 Demolishing brick work manually / by mechanical means including stacking of serviceable 0.00 0.00

material and disposal of unserviceable material within 50 metres lead as per direction of

Engineer-in-Charge.

15.12 Dismantling doors, windows and clerestory windows (steel or wood) shutter including 0.00 0.00

chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:

G.8 15.12.1 Of area 3 sq. metres and below EACH 5.00 367.20 1,836.00 0.00

G.9 15.12.2 Of area beyond 3 sq. metres EACH 5.00 502.75 2,513.75 0.00

G.10 15.57 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling SQM 0.00 56.35 0.00 0.00

including disposal of unserviceable material and stacking of serviceable material with in 50

meters lead as directed by Engineer-in-charge.

15.2 Demolishing cement concrete manually / by mechanical means including disposal of 0.00 0.00

material within 50 metres lead as per direction of Engineer-in - charge.

G.11 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) CUM 5.00 2434.25 12,171.25 0.00

15.45 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, 0.00 0.00

manually / by mechanical means breaking lead caulked joints, melting of lead and making

into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of

Engineer-in-Charge:

G.13 15.44 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking 0.00 0.00

out the pipes, manually / by mechanical means including stacking of pipes within 50 metres

lead as per direction of Engineer-in-Charge:

G.14 15.52 Dismantling of flushing cistern of all types (C.I. /PVC/Vitrous China) including stacking of useful Nos 6.00 112.05 672.30 0.00

materials near the site and disposal of unserviceable materials within 50 metres lead.

G.15 MR Based Dismantling o Wash basins, Urinals, WC including stacking of useful material near the site and Nos 5.00 112.05 560.25

on item No disposal of unservicable materials within 50 metres lead

G.16 15.3 Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars cum 10.00 3551.25 35,512.50 0.00

and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-

G.17 15.5 Extra for cutting reinforcement bars manually / by mechanical means in R.C.C. or R.B. work sqm 5.00 1147.20 5,736.00 0.00

(Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of

Engineer - in -charge.

G.18 15.6 Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work. kg 12.00 9.05 108.60 0.00

Digitally signed by AMIT

1.1 Carriage of material by mechanical transport including loading unloading and stacking 0.00 0.00

1.1.1 Lime, murrum, building rubbish 0.00 0.00

H 6.47 Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 cum 18.00 8333.65 150,005.70 0.00

mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band

at sill level and lintel level with approved block laying polymer modified adhesive mortar all

complete as per direction of Engineer-in-Charge. (The payment of RCC band and

reinforcement shall be made for seperately).

I SKIRTING & TRIM 0.00 0.00

I.1 MR Providing and fixing 1.5 to 2mm thick 50mm high extruded black/ anodized aluminium skirting Rmt 210.00 562 0.00 118,020.00

as per IS standard pasted/fixed over 12 mm thick BWP ply with aluminium strip as per

Architects approval.

I.2 MR Providing and fixing Window Cill of upto 450 mm wide, in 19mm thick pre-polished granite Rmt 90.00 1,583 0.00 142,470.00

slabs of approved shade, fixed on a bed of cement mortar 1:4, not more than 25mm thick,

flushed with the finished surface of wall, inclusive of pointing joints with neat cement slurry

with pigmented additives to match the shade of the tile, 6mm groove in the wall at the

junction of granite and finished surface of wall etc complete. Cost of pre-Polished Granite

Rs.1,300/- per Sqmt.

J COUNTER WORK 0.00 0.00

J.1 MR Meeting Room Credenza: Meeting Room Credenza of size 450 deep x 3000 avg. length 800 Nos 3.00 45,600 0.00 136,800.00

high made up of 20 mm thk laminate finished top and sides,shutters etc. complete with

necessary hardaware and fittings as design & Drawing.

MR Providing and constructing full height storage of width and size as per drawings, with top, 0.00 0.00

sides and bottom in 19 mm thick commercial ply, back in 8mm thick commercial ply,

intermediates in 19 mm thick commercial ply, shutter hollow core with framework as per

drawings in 19 mm thick commercial ply, with 4mm thick commercial ply panel. All external

surfaces to be finished in approved laminate, with balancing laminate on the interior surface.

All exposed edges to be finished in approved PVC edge binding. Rate to include hardware

such as approved locks, auto closing hinges for shutters, approved handles, door stop, tower

bolt, etc. complete.

Digitally signed by AMIT

MR 700 MM DEEP VENDING COUNTER :- Providing and fixing vending counter at pantry, counter 0.00 0.00

made of 20 mm thk. (finished) granite top over BWP with 20x20 groove,base cabinet made

of laminated shutter of 19mm thick BWP(100% Gurjan with CCP technology) with shelves and

partitions in balancing laminate with edge lipping, 50mm high aluminium skirting, The rate

inclusive of necessory hardwood & ply backing, laminate finished, Sink with necessaary cut-

outs,Hardware- SS Anodised Hettitch shutter pulls 045206, self-closing hinges, spring loaded

shutter latch inside, all cabinet hardware to be HETITCH make & as/Architects approval

Complete as per design and drawing. (Cost of Polished Granite Rs. 1,200/- per Sqm.)

K CEILING COVE 0.00 0.00

K.1 MR Ceiling Coves: Providing and making ceiling coves in 12mm thick gypboard/ply including Rmt 350.00 199 0.00 69,650.00

necessory support etc. complete with plastic emulsion paint and as per drawing.(Size-150 x

L PELMET 0.00 0.00

L.1 MR Providing and fixing pelmets to Blinds made of 19 mm thick commercial ply, having clear Rmt 125.00 866 0.00 108,250.00

internal dimensions as 250 x 300mm, finished in approved laminate on all exposed surfaces

from all external surfaces and balancing laminate on all internal surfaces, supported from

RCC ceiling slab by necessary framework, giving additional supports in MS angles etc.

complete. All exposed edges to be finished in 6mm thick TW beading and finished in

approved colour.

M MR COMPANY LOGO:- Providing and fixing three dimensional signage in Acrylic Sheet finish to nos 2.00 30,452 0.00 60,904.00

match brand colour shade of size approx. 450 mm x 1800 mm as per clients artwork.

Average thickness of Signage letter 25 mm acrylic & laser cut as per design and shop

drawing ( Meeting Room , Board Room reception )

N Reception Table 2400x750x1050mm 0.00 0.00

N.1 MR Providing and fixing of reception desk lower level at 750mm height formed out of 19mm ply nos 1.00 74,552 0.00 74,552.00

framework, exposed internal surface shall be finished in approved shade of 1mm thick

Laminate, as per details and Designs. The table shall be cladded with 1mm thick Laminate

along the edges/Fascia made of 50mm thick ply boxing frame work bent to shape as per

design and drawing. This shall also consist of Ply Box of Size 650mmx800mm @ 750mm level

height from FFL. Made using 19mm thick ply box frame work, finished with 1mm thick

Laminate.The internal surfaces and table top shall be finished with laminate surface as per

300mm wide upper counter top at 1050mm level - Table top shall be formed out of 50mm 0.00 0.00

thick ply boxing frame work bent to shape as per design and detail and finished with 12mm

thick Solid Acrylic Surfaces of approved shade as per design and details.

The facia to be finished in Solid Acrylic Surfaces as per approved sample in curved profile. 0.00 0.00

The table to have in built 1 no drawer pedestal finished with laminate of approved colour 0.00 0.00

and shade as per details.Drawer to be complete with hardware installed as directed to

consist of the following: 1 no multi purpose lock as specified, Telescopic channel, etc.,

complete as per details and Consultant's approval.

O SIGNAGES 0.00 0.00

Digitally signed by AMIT

O.1 MR Supplying and fixing of Toilet signages: Size: 150mmx 150mm imp.aluminum profile with 3 mm nos 7.00 555 0.00 3,885.00

acrylic Gents/Ladies pictograph printed on canvas: GENTS, PHYSICALLY CHAL., LADIES,

PANTRY, MEETING ROOM ETC.

O.2 MR Providing and Fixing the Fire Exit Signages made up of Rigid integral PVC Cladded with Photo nos 10.00 880 0.00 8,800.00

luminiscent (Glow in Dark) material with computer cut vinyl lettering on it. Double sided and

Single sidded.As per architects Instruction. Fire makes and codes- readily available Make:

O.3 MR FIRE EVACUATION SIGNAGE - Fire Evacuation Signage: Material Clip-on (Aluminum Frame) nos 4.00 3,384 0.00 13,536.00

with digital print with lamination Fire Plan as per your Specification and Pasted the double

sided 3M Tape. Size A3

O.4 MR Providing and fixing PUSH/PULL signage for all doors nos 32.00 244 0.00 7,808.00

O.5 MR IN CASE OF FIRE USE STAIRS' photo luminescent sign size: 200 x 200mm nos 2.00 440 0.00 880.00

O.6 MR Providing and fixing Manual Call Point signage 'TO BE ACTIVATED ONLY DURING EMERGENCY' nos 2.00 32,500 0.00 65,000.00

made of mirror art paper 220 GSM with self adhesive (MCP signage)

O.7 MR Providing & Fixing of Main Logo in Aluminium Sheet, Router cyt, Stove enamel finish to match nos 2.00 32,500 0.00 65,000.00

shade of size approx. 300 mm x 1800 mm as per clients artwork.

O.8 MR Three dimensional stainless steel signages complete as per design and drawings. Average Sqinch 2,400.00 30 0.00 72,000.00

thickness of Signages letter 25 mm SS, laser welded signage in given artwork & approved

sample (Average size 1050 x 450mm).

O.9 MR Providing and fixing Fire Extinguisher signage on 3mm PVC foam sheet of size 300x150mm with nos 12.00 1,850 0.00 22,200.00

self sticking adhesive

O.10 MR Supplying and fixing of FIRE EXIT direction signs: Size: 380 x 125mm, Acrylic 3mm thick base nos 15.00 640 0.00 9,600.00

Double sides sign, matter self luminance Green base signs, to be hung by SS chain.

O.11 MR Providing & Fixing of 50 x 250 mm sliding plate with SS Base to accommodate name tags of nos 19.00 2,000 0.00 38,000.00

cabins fixed to all enclosed area as per approved sample.

P Providing & Fixing Passive Fire Stop Treatment as per: 0.00 0.00

P.1 MR Providing Fire expanding foam with minimum 2 hours fire rating when tested in accordance sqm 5 12451 0.00 62,255.00

with BS 476 part 20 and UL 1479 for horizontal openings in fire rated floors or slabs and vertical

openings in walls made of concrete/ masonry or Gypsum for passing service shafts. The

expanding foam expands seven times its volume to fill the cavity at the time of dispensing

the material and shall fully cure within two minutes after dispensing. The service lines could

be of various types like electrical cables, cable trays or metal pipes etc. The product shall

be age tested for 30 years as per Dafstb and DIBT standards. The product shall provide water

tightness when tested for W rating as per UL standards and shall be tested for providing a

sound insualtion of 50 when tested in accordance with ASTM E 90. packing.

The Application area should be cleaned. A suitable backing material should be used around 0.00 0.00

metal pipes or electrical cables and then the FireStop sealant should be dispended, the first

few drops such that only properly mixed materials will be used inside the opening (This can

be known when the color of the foam is red and not pale yellow).

UL Classified, FM,LPCB,BS 476-20,pr EN 1366-3 0.00 0.00

P.2 MR Supplying & Placing of 24" High brid Polymer planters box as per approved sample by client, nos 18.00 6,090 0.00 109,620.00

including Planter boxes to have filling with white pebbles, as app. by Architect.

Digitally signed by AMIT

TOTAL CIVIL & INTERIOR WORK AMOUNTS 4,303,316.20 7,416,303.63

Digitally signed by AMIT

S.H.10 PLUMBING WORK: SAGARMALA FINANCE CORPORATION LTD., NEW DELHI, ESTIMATE

S NO. DSR NO. DESCRIPTION OF ITEM UNIT BOQ DSR RATE DSR Rate after GST NDSR Rate DSR AMOUNT NDSR AMOUNT

2019 QTY. Multiplication

1 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.

waste fittings complete.

a MR 32mm flexible pipe Each 7.00 65.00 455.00

2 Providing and Fixing soil, waste and vent pipes

a 17.35.1.2 100mm dia Centrifugally cast (spun) iron socketed pipe as per IS: 3989 M 30.00 1,180.75 1,255.49 37,664.74

b 17.35.2.2 75mm dia Centrifugally cast (spun) iron socketed pipe as per IS: 3989 M 30.00 1,186.00 1,261.07 37,832.21

3 17.70.2 Providing and fixing PTMT Bottle Trap for Wash basin and sink. Each 8.00 375.65 399.43 3,195.43

Bottle trap 38 mm single piece moulded with height of 270 mm, effective

length of tail pipe 260 mm from the centre of the waste coupling, 77 mm

breadth with 25 mm minimum water seal, weighing not less than 263 gms

4 Providing and Fixing trap of self cleansing design with screwed down or hinged

grating with or without vent arm complete, including cost of cutting and making

good the floor and walls

a 17.60.2.1 100mm inlet and 75mm outlet Sand cast iron S&S as per IS - 3989 Each 12.00 1,975.15 2,100.18 25,202.12

5 Painting sand cast iron/centrifugally cast (spun) iron soil, waste vent pipes and

fittings with paint of any colour such as chocolate grey or buff etc. over a coat

of primer (of approved quality) for new work.

6 Providing and fixing MS holder-bat clamps of approved design to Sand Cast

iron/cast iron (spun) pipe embedded in and including cement concrete blocks

10x10x10 cm of 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate

20mm nominal size) including cost of cutting holes and making good the walls

7 Providing and fixing bend of required degree with access door insertion

rubber washer 3mm thick bolts and nuts complete

a 17.38.1.2 100mm Sand Cast iron S&S as per IS-3989 Each 9.00 705.20 749.84 6,748.55

b 17.38.2.2 75mm Sand Cast iron S&S as per IS-3989 Each 8.00 522.80 555.89 4,447.15

8 Providing and fixing plain bend of required degree

a 17.39.1.2 100mm Sand Cast iron S&S as per IS-3989 Each 5.00 570.05 606.13 3,030.67

b 17.39.2.2 75mm Sand Cast iron S&S as per IS-3989 Each 3.00 390.50 415.22 1,245.66

9 Providing and fixing heal rest sanitary bend

a 17.40.1.2 100mm Sand Cast iron S&S as per IS-3989 Each 9.00 548.70 583.43 5,250.89

b 17.40.2.2. 75mm Sand Cast iron S&S as per IS-3989 Each 8.00 504.30 536.22 4,289.78

Digitally signed by AMIT

10 Providing and fixing single equal plain junction of required degree with access

door, insertion rubber washer 3 mm thick, bolts and nuts complete.

11 Providing and fixing collars

a 17.57.1.2 100mm Sand Cast iron S&S as per IS-3989 Each 9.00 513.15 545.63 4,910.69

12 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron

pipes & fittings of dia

13 17.59 Providing and fixing MS stays and clamps for sand cast iron/ centrifugally cast

(spun) iron pipes of diameter.

14 18.51 Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 gms.

15 Providing and fixing C.P. brass stop cock (concealed) of standard design and

of approved make conforming to IS : 8931.

16 Providing and fixing C.P. brass angle valve for basin mixer and gyser points of

approved quality conforming to IS : 8931

17 17.61 Cutting chases in brick masonry walls for following diameter sand cast

iron/centrifugally cast (spun) iron pipes and making good the same with

cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate

12.5 m nominal size) including necessary plaster and pointing in cement mortar

1:4 (1 cement : 4 coarse sand) :

18 18.76 Cutting holes upto 30 X 30 cm in walls including making good the same.

18.76.1 With common burnt clay F.P.S. (non modular) bricks Each 4.00 416.80 443.18 1,772.73

19 18.78 Making chases upto 7.5 X 7.5 cm in walls including making good after housing M 5.00 202.90 215.74 1,078.72

20 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain & brass

threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.

This includes jointing of pipes & fittings with one step CPVC solvent cement and

the cost of cutting chases and making good the same including testing of joints

complete as per direction of Engineer in Charge.

Concealed work including cutting chases and making good the walls etc.,

a 18.8.1 15mm nominal outer dia pipes M 120.00 497.80 529.31 63,517.29

b 18.8.2 20mm nominal outer dia pipes M 80.00 537.60 571.63 45,730.41

Digitally signed by AMIT

c 18.8.3 25mm nominal outer dia pipes M 90.00 627.25 666.95 60,025.94

21 Providing and fixing gun metal gate valve with C.I. Wheel of approved quality

22 Providing and fixing unplasticised PVC connection pipe with brass unions.

a 18.21.1.1 30cm lengh &15 mm nominal bore Each 5.00 85.00 90.38 451.90

23 MR Providing and fixing white vitreous china clay wall mounted European type Each 8.00 23,411.00 187,288.00

Water Closet (EWC) with dual flush concealed cistern of approved make, of

approved shade similar to Jaquar Kubix KUS-WHT-35953BI or equivalent

including matching shade of plastic seat and lid cover, fittings, connectors,

necessary hanging arrangement, rubber buffers etc. including cutting and

making good the wall and floors wherever required, making connections to soil

/ vent pipe etc., complete in all respects inclusive of cost of all required fittings,

fixtures, materials, labour, tools, tackles etc. as per specifications and direction

of Engineer-in-Charge.

24 MR Providing and fixing glazed vitreous China rectangular wash basin of 560x410

mm size of approved make similar to Jaquar Kubix KUS-WHT-35935 or similar

equivalent make with MS or CI brackets painted white, C.P. brass chain with

rubber plug, 32 mm CP brass waste coupling of standard pattern, 32 mm CP

brass bottle trap and union, 32 mm dia C.P. pipes to wall flange etc. including

cutting and making good the walls & floors where required complete in all

respects inclusive of cost of all required fittings, fixtures, materials, labour, tools,

tackles etc. as per specifications and direction of Engineer in Charge

24.a a) White colour Each 7.00 7,385.00 51,695.00

25 17.10 Providing and fixing stainless steel sink of approved make with 40mm dia CP

brass waste coupling of standard pattern, CP brass chain & plug, 40 mm dia

PVC waste, CP grating including fixing under counter top, cutting and making

good the walls & floors where required complete in all respects inclusive of cost

of all required fittings, fixtures, materials, labour, tools, tackles etc. as per

specifications and direction of Site Engineer.

25.a 17.10.1 a) Stainless steel sink single bowl with drain board of overall size Each 1.00 6,945.60 7,385.26 7,385.26

510mmx1040mm, 250mm deep

26 MR Providing and fixing ivory coloured vitreous china flat back urinal basin set of Each 3.00 24,409.00 73,227.00

Urinals similar to Jaquar URS-WHT-132530 or equivalent approved make with

auto sensor flushing system with built in sensor including spreader, all fittings,

brackets for wall fixing, connection pipe, waste pipe etc. for individual urinal

including cutting and making good the walls and floors wherever required etc.,

complete in all respects inclusive of cost of all required fittings, fixtures, materials,

labour, tools, tackles etc. as per specifications and direction of Site Engineer.

Digitally signed by AMIT

27 MR Providing & fixing 6mm thick, copper back finish, looking mirror of required size, Sqm 10.00 3,067.00 30,670.00

made of float sheet glass of best quality & approved make, over 12 mm thick

marine board fixed to rawl plug with round head screws and washers including

teak wood beading with melamine polish all around, complete in all respects

inclusive of cost of all materials, labour, tools, tackles etc. as per specifications

and direction of EIC.

28 MR Providing and fixing CP Central hole single lever wash basin tap with tuchfree Each 8.00 8,923.00 71,384.00

senser & popup waste system with 2 nos. 10 mm dia. 450mm long copper pipes

and brass nuts, size 15mm including cutting and making good the walls where

required complete in all respects as per direction of Engineer-in-Charge.

29 MR Providing and fixing CP brass tap with CP brass flange including cutting and Each 8.00 7,631.00 61,048.00

making good the walls where required complete in all respects inclusive of cost

of all materials, labour, tools, tackles etc. as per specifications and direction of

Site Engineer. Two way Bib Cock with wall flange.

30 MR Providing & fixing health faucet/ hand shower ABS body with 1 meter long PVC Each 8.00 1,468.00 11,744.00

tube and wall hook with flexible tube 8mm dia 1.5 m long.

31 22.5 Providing and laying water proofing treatment in sunken portion of WCs, Sqm 120.00 617.05 656.11 78,733.11

bathroom etc., by applying cement slurry mixed with water proofing cement

compound consisting of applying : a) First layer of slurry of cement @ 0.488

kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This

layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement

@ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm.

This layer will be allowed to air cure for 4 hours followed with water curing for 48

hours. The rate includes preparation of surface, treatment and sealing of all

joints, corners, junctions of pipes and masonry with polymer mixed slurry.

32 22.14.1 Grading roof for water proofing treatment with cement concrete 1:2:4 (1 Cum 10.00 8,042.30 8,551.38 85,513.78

cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

33 MR Providing & fixing Twin Toilet Paper Holder - Steel Twin Toilet Paper Holder - Nos. 8.00 2,649.00 21,192.00

Steel,Application : WC Cubicle Area

34 MR Provoding & fixing Automatic Hand Sanitiser Dispenser floor standing- High Traffic Nos. 6.00 26,488.00 158,928.00

Providing & Fixing of Automatic Hand Sanitizer , EHST3S or equivalent

35 MR Providing & fixing AUTO SOAP DISPENSER similar to pluto PSD101 or equivalent Nos. 6.00 3,579.00 21,474.00

36 MR Providing & fixing SS finish sensor based hand dryer Nos. 6.00 26,660.00 159,960.00

37 MR Providing & fixing SS waste receptable bin of similar to Kinox KWR or equivalent. Nos. 10.00 6,472.00 64,720.00

38 MR Providing & fixing Manual Paper Dispenser finish in Stainless Steel. Size 250(L)x Nos. 6.00 8,508.00 51,048.00

92(W)x 370(H) similar to modle no. Trimax P2 or equivalent.

Digitally signed by AMIT

39 MR Supply and Installation of modular WC cubicles of width and depth as per Nos. 4.00 36,940.00 147,760.00

specifications/ drawings. Cubicle height to be upto 2100 mm.

ITEM DESCRIPTION

Made from solid grade compact high pressure laminate as per

IS:2046 manufactured under high specific pressure > 5 MPa and temperature

>120oC with bunch of kraft papers impregnated with thermosetting phenolic

resin and decorative papers made of Alpha cellulose fiber impregnated with

thermosetting melamine resin which provide superior scratch, abrasion, heat,

chemical, impact, graffiti & moisture resistance along with anti-bacterial

properties. Panels have a black core that when machined, presents a

distinctive black edge. Panel thickness 12 mm. Design no. as specified by Arch.

/ Engr. in suede finish. Size of panels to be as per drawing and verified as per site.

HARDWARE & ACCESSORIES

• Rectangular head frame structure made from Stainless steel grade 304.

Surface finish to be brush type. A thin plastic film pasted for surface protection.

Size to be 55mmx42mmx1.6 mmT.

Corner joinery section made from Stainless steel grade 304. Surface finish to be

brush type. A thin plastic film pasted for surface protection. Size to be

35mmx15mmx0.8 mmT.

Wall joinery section with hamming profile made from Stainless steel grade 304.

Surface finish to be brush type. A thin plastic film pasted for surface protection.

Size to be 21mmx16mmx0.8 mmT.

• Adjustable Palm Design Pedestal Footing of base diameter 64 mm made from

Stainless steel grade 316 giving a clearance height of 150 mm. Surface finish to

• Spring loaded Butt Hinges made from Stainless steel grade 304. Surface finish

to be matt type. Covers to be lacquer coated.

• Conical shape Coat hook with rubber stopper made from Stainless steel

grade 304. Surface finish to be matt type.

• Round Door knob diameter 30 mm with grooves for better hand grip made

from Stainless steel grade 304. Surface finish to be matt type.

• Rotating Thumb-turn locking system with privacy indicator made from Stainless

steel grade 304. Surface finish to be matt type.

• Anti-noise rubber padding of thickness 2 mm and width 10 mm

• Stainless steel grade 304 screws.

Partition system made out of Aluminium Extrusions around 2mm thick and

anodised around 15 micron.Size 25x45mm at top and bottom .The Partition to

have vertical portals to house the service cable.The portals to be on the door

side as well as on the corner and junction with solid wall.

The wall starter shall be 105/more x105mm/more.The partition sections to be

suitale to be clubbed with any type of door frame and door shutter(Sliding or

hinged door). The sections to be stable enough to accept glass thickness 10mm

toughened glass also.The partition sections to be available in anodized finish in

any RAL color as approved by the architects.The Partition should be

demountable and easy to install and maintain.The glass joints to be finished with

matching aluminium alloy I,T and corner sections suitable for 10mm thick

Cubicles: Std Sizes (W x D x H)- 900 mm x 1550 mm x 1980 mm ( Height is

including 150 mm gap from bottom) Door Size- 600 mm

40 MR Providing and fixing urinal divider panel made up of 12mm thk. Compact Nos. 4.00 3,866.00 15,464.00

laminate using baracket.

Digitally signed by AMIT

41 MR PUMP For the Wash Room of the cabin with one no. standby unit ( Total 8 no. Pair 4.00 6,500.00 26,000.00

TOTAL PLUMBING WORK AMOUNT 514,997.55 1,154,057.00

Digitally signed by AMIT

Schedule of Quantities: IP BASED CCTV SYSTEM

S No Description Unit Qty Rate DSR Amount NDSR Amount

SITC of 5MP IR Vandal Proof Dome Network Camera Lens Size:

3.0mm – 13.5mm motorized vari-focal lens, Aperture F1.4 – F3.2,

NDAA Compliance must approved, Security: SSL Encryption, Multi-

User Authority, IEEE802.1x, IP Filtering, HTTPS , IR Distance : 30M

IR, Memory Support : Micro SD 512 GB, Two-way Audio

Communication supported, Audio Compression Algorithm: ADPCM

16K, G.726, G.711 u-Law, G.711 a-Law DC12V/PoE, IP67 and K10

rating, Image Sensor: 1/2.8” CMOS Maximum Resolution: 2592 x

1944, 11, Video Resolution: 4:3 : 2592x1944, 1920x1440,

640x360, Video Compression : H.265, H.264, Dynamic Range:

120dB, True Day & Night: Yes (ICR) MJPEG Scanning Mode:

Progressive Scan COLOR : 0.15 lux @ F2.0 B/W : 0 lux (IR LED

ON), Shutter Speed (Auto) 1/10000s~1s, True day/night, WDR

120db, 3D DNR, HLC & BLC, Quadruple streams, Four Streams

individually configurable, Privacy Masking: 8 Zone, Camera shall

confirm ONVIF Profile S, Smart codec by ROI, MTBF time 1,25,000

Hours @40 degree (Report to be submitted), Inbuilt Analytics

Motion Detection, Alarm in, Tampering and Trip Zone, Shall provide

Quadruple streams, Object , SSL Encryption, Multi-User Authority,

IEEE 802.1x, IP Filtering, HTTPS , Operating Temperature: -40°C ~

+55°C (-40°F ~ +131°F) , Operating Humidity: 0% to 90% non-

condensing, Certification: BIS/UL, FCC, CE approval. MAC

Address: The MAC address of the proposed IP cameras must be

registered in the same name of the OEM. The IP Camera OEM

must confirm that the MAC address of the surveillance cameras;

OUI must be in the name of the OEM. etc complete as per

specifications of this and directions of Engineer-in- Charge

Digitally signed by AMIT

Supply, Installation, Testing & Commissioning of 32 Channel IP

network video recording capability Rack mount NVR with

Redundant Power Supply and minimum 4 Slots, should support

H.264/H.265 compression, network incoming throughput of 850

Mbps and 12MP recording resolution, time division multiplexing,

real time recording of multiple cameras, storing digitized and

compressed images on internal hard disk drives for fast search and

retrieval either locally at the unit, or from a remote workstation using

a Graphical User Interface (GUI), should allow all connected

cameras to be discovered and configured automatically,

simultaneous live view, record, play back, data transmission in real

time, maximum throughput of 400 Mbps, UHD 1920 ips, support

H.264/H.265 compression, 2X – 12X digital zoom in live view

3 mode, 2X – 12X digital zoom in playback mode, time lapse, event, Nos. 1 275,529.00 275,529.00

time lapse + event, pre / post-event, panic recording schedule,

recording bitrate control mode: CBR and VBR, alarm, audio, motion,

trip zone, video loss, text-in, system event triggering, fan error,

record failure, storage related alerts and alarm in error, email,

remote notification (call back) to remote work stations, mobile

device push notification, Time-lapse, Event log, Motion, Thumbnail,

Text-in search options, SSL, Password encryption options, network

keyboardfor controlling the NVR and PTZ, 1 Gigabit Remote Client

port, 4 Gigabit ports, ONVIF compliant , output interface 1 HDMI (up

to 4K), 4 internal SATA ports (10TB per SATA) with recording

capacity up to 40 TB. etc complete as per specifications of this and

directions of Engineer-in- Charge.

Supply Installation Testing & Commissioning of 43 inch Full HD LED

5 monitor including wall mount brackets/ clamps/ desk mounting Nos. 1 39,195.00 39,195.00

6 Supply and fixing of RJ45 Connector Nos. 34 20.00 680.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - IPPBX & DISPLAY

S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

Supply, Installation, Testing & Commissioning of Server based Communication System

with all the required Software licenses and Hardware - IP-PBX/IP Telephony

Communications Server: The IP Telephony Solution shall support the following Services -

Voice, IM, Presence and Audio Conference The IP Telephony Solution should support

H.323 and SIP The Solution should support the following Trunks - FXO, E1 PRI and SIP

The IP Telephony solution should incorporate all licenses for the Phones and Trunks

Solution should support all Extensions from Day 1 with future scalabilityupto 500 users.

Licenses for all Phones supplied should be provisioned on Day1 Solution should support

Hard 70 IP Phones, Rack mount architecture, complete as required and as per technical

specifications.or its equivalent specifications

Supply, Installation, Testing & Commissioning of Color display—2.8 inches x 2.1 inches

(7.0 cm x 5.3 cm)—Diagonal width: 3.5 inches (8.8 cm)▪ 8 buttons with dual LEDs (red,

green)▪ 4 softkeys▪ Hard buttons for phone, messages, contacts, history, home, navigation

cluster,headset, speaker, volume, mute▪ LEDs for speaker, mute, headset, message,

history▪ 24 administrative buttons▪ Wideband audio in handset and headset▪ Full duplex

speakerphone ▪ Ergonomic hearing aid compatible handset supports TTD acoustic

coupler▪ Message waiting indicator▪ Mute indicator with optional mute alerting▪ IC call

alerting with 360-degree visibility▪ Rich, classic, alternate, and downloadable ringtones▪

2 Dual-position stand, optional wallmount stand▪ Gigabit Ethernet (10 / 100 / 1000) line Nos 10 ₹ 18,554.00 ₹ 185,540.00

interface▪ Second Ethernet interface 10 / 100 / 1000 Mbps▪ PoE Class (IEEE 802.3af)

registers as class 1 device and supports 802.3az▪ Optional AC to 5 volt adapter▪ Order

Custom Bezels / Faceplates▪ SIP & H.323 protocol support▪ Standards-based codec

support: G.711, G.726, G.729A / B, G.722, Opus.▪ Zero touch deployment via Device

Enrollment Services Support▪ Supports the following languages: Arabic, Brazilian

Portuguese, Simplified Chinese, Dutch, English, Canadian French, Parisian French,

German, Hebrew, Italian, Japanese, Korean, Polish, Latin American Spanish, Castilian

Spanish,Thai, Turkish, and Russian. or its equivalent specifications

Landline Phone with 16 Digit LCD Display & Adjustable contrast,10 One Touch Memory

Buttons,2Ways SpeakerPhone 1 year manufacturer warranty for device and 6 months

manufacturer warranty

Supply, Installation,Testing and commisioning of IP phone license complete as required

Digitally signed by AMIT

S. No. Item Description Unit Qty Rate Amoint

Supply, installation, testing, and commissioning of smart-managed

network switch, which should have the following features or better: 48 RJ-

45 auto sensing 10/100/1000 Mbps Gigabit Ethernet ports, a PoE+ power

budget of 270 W, (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-

TX, IEEE 802.3ab Type 1000BASE-T, or better), 4 SFP/SFP+ uplink ports

supporting 1/10GbE fiber transceivers (or better), a switching capacity of

176 Gbps or more, and a forwarding rate of 130.95 Mpps or higher. The

switch must utilize an ARM Cortex-A9 processor at 800 MHz or faster, with

at least 512 MB SDRAM and 256 MB flash memory, and a packet buffer of

1.5 MB or more. It should support Layer 2+ features, including VLANs

1 48 Port POE Switch (minimum 256 or more), link aggregation, Spanning Tree Protocol, IGMP Nos 1 ₹ 255,720.00 ₹ 255,720.00

snooping, Quality of Service (QoS), port mirroring, rate limiting, auto

MDI/MDI-X, and advanced security features such as IEEE 802.1X

authentication, ACLs, and automatic denial-of-service (DoS) protection.

The unit should offer web-based, cloud, and SNMP management, with

support for management via Aruba Instant On portal, mobile app, or local

web GUI, and provide multiple privilege levels with password protection.

The MAC address table should support at least 16,000 entries or more. The

switch must be rack-mountable (1U form factor)

Supply, Installation, Testing and Commissioning of 24 Port POE+ Access

Switch to provide 24 nos. 1G Base-T ports with minimum PoE budget of

270W and 4x 1/10GbE uplink ports. with at least 512 MB SDRAM and 256

2 24 Port L2 Poe Switch MB flash memory, and a packet buffer of 1.5 MB or more, It should Nos 1 ₹ 110,370.00 ₹ 110,370.00

support Layer 2+ features, including VLANs, Should have static, RIPv1,

RIPv2, RIPng,OSPF, MACSEC,802.1x , PBR and VRRP from day 1 &

upgradable to support IS-IS, VXLAN & VRF. Common Criteria Certification

NDPP and Ipv6 Certification from day-1

Digitally signed by AMIT

NAS Server Bundle 5 Bay (16GB RAM, 40TB Storage) - 5 x 8TB NAS Hard

Drives, High Desktop Network Storage Device Enterprise-class 40TB

storage: Pre-installed with 5 x 8TB NAS drives for 24/7 reliability and

• 16GB RAM: Seamlessly manage large files, mul task across applica ons,

and enjoy faster indexing with error-fixing memory.

512GB External SSD Included - Use it for quick backups or as a cache

amplifier to speed up workflows.

Powerful quad-core CPU: Designed for heavy-duty workloads like

virtualization, surveillance, and high-volume file sharing.

3 NAS System ( Hard Disk) Dual NVMe Cache Support - Future-proof design with 2 M.2 slots for ultra- ₹ 473,798.92

fast internal SSD caching (NVMe not included).

Expandable up to 15 drives: Easily expand storage with Synology expansion

units; perfect for growing businesses or media libraries.

Advanced Operating System – Access secure apps for backup, streaming,

syncing, file sharing, and remote access, from anywhere.

Loaded with connectivity: 4 x 1GbE LAN ports, 3 x USB 3.2 ports, 2 x eSATA,

ready for any workflow or network configuration. Plug-and-Play

configuration: comes pre-configured and ready for deployment

Compa ble DevicesServer, Desktop, Laptop ( including all the paasive

and active component as required including sofware, warranty and

Digitally signed by AMIT

S.No. Item Specifications Qty Unit Price Total Price

4K Utra HD AI Smart LED Smart TV Features: Google TV | Watchlist | Google

Assistant | Chromecast Built In | Built In Mic |Game menu | ALLM/eARC (HDMI 2.1

Compatible) | Additional Features: Apple Airplay | Apple Homekit | Alexa

Resolution: 4K Ultra HD (3840 x 2160) | Refresh Rate: 60 hertz | LED

Connectivity: 4 HDMI ports to connect set top box, Blu Ray players, gaming console

| 2 USB ports to connect hard drives and other USB devices

Sound : 20 Watts Output | 2ch |Bass Reflex Speaker | Dolby Atmos | Ambient

Optimization |2 Full Range (Bass Reflex) | 2 Subwoofers

Smart TV Features: Google TV | Watchlist | Google Assistant | Chromecast Built In |

Built In Mic |Game menu | ALLM/eARC (HDMI 2.1 Compatible) | Additional

Features: Apple Airplay | Apple Homekit | Alexa

Display : 4K LED | 4K HDR Processor X1 | Triluminos PRO | 4K X-Reality PRO |

MotionFlow XR 200 | HDR10/HLG

Warranty Information: 1 Year comprehensive warranty on product provided by the

brand from the date of purchase, including remote for technical issue| Contact

Brand Support for assistance.

Supply, installation, testing and commissioning of 98 inch display which should

feature a 98-inch 4K Ultra HD (3840 x 2160) LCD panel with Direct LED backlighting,

16:9 aspect ratio, and support for 24/7 professional operation. The display should

have a typical brightness of at least 780 cd/m², a contrast ratio of 4400:1 or higher,

and a wide viewing angle of 178° both horizontally and vertically. It should support

HDR10 and HLG formats, X1 4K HDR Processor, TRILUMINOS Pro technology for

wide color gamut, and 10-bit color depth for lifelike image reproduction. The unit

must provide advanced features such as anti-glare and anti-reflection coating with a

98" Led Display haze value of 47%, X-Wide Angle technology, and a minimum response time of 6 ms 1 ₹ 954,000.00 ₹ 954,000.00

(G to G). Connectivity should include at least 4 HDMI inputs (HDCP 2.3), 1

DisplayPort 1.2a, 1 USB Type-C, 3 USB-A, LAN (RJ45), RS-232C, IR in, audio out, and

Wi-Fi/Bluetooth for wireless connectivity. The display should run on Android 10 OS

with Pro Mode, support HTML5, 4K upscaling, integrated media player, and offer

flexible installation in landscape, portrait, or tilt orientations. The enclosure should

be robust yet lightweight, with a symmetrical, slim bezel design and VESA mounting

(600 x 400 mm). Power consumption should not exceed 564W (typical), and the

unit must operate reliably in temperatures from 0°C to 40°C

Digitally signed by AMIT

4K Ultra HD Smart QLED TV Resolution: QLED 4K Ultra HD (3840 x 2160) | Refresh

Connectivity: Enjoy seamless integration with 3 HDMI Ports for connecting your Set-

Top Box/DTH, Soundbar, Home Theater, Gaming Console, and more. Plus, stay

flexible with 1 USB-A Port for easy access to Hard Drives and other USB-A

compatible devices. Stay connected with Wi-Fi 5, Bluetooth 5.3, and HDMI eARC,

along with an Ethernet LAN Port for stable wired internet. Additional features

include Anynet+ (HDMI-CEC) for unified control and RF In for Terrestrial/Cable input.

Sound Features: Powerful 20 W Sound Output | Object Tracking Sound lite | Q-

Symphony | Bluetooth Audio | Adaptive Sound

Smart TV Features: Works with external Alexa/Google Assistant Devices| Endless

Content with Samsung TV Plus (Access 100+ free TV Channels) | Web Browser |

SmartThings Hub | Matter Hub | IoT Sensor Support | Quick Remote | Mobile-to-TV

Mirroring | TV initiate mirroring | Sound Mirroring | Wireless TV On | Multi View

(upto 2 videos) | Connect Apple Devices with AirPlay | Universal Guide | Workspace

for Remote Access | Generative Wallpaper | Karaoke mic (connect your phone to

use as a mic) | Buds Auto Switch | Workout Tracker | Daily+ | Multi Control |

Storage Sharing | Storage Sharing | Energy Rating: 2 Star | Annual Energy

Consumption: 264.99 kWh |

Display Features: Q4 AI Processor | Quantum HDR | Quantum Dot Display | HDR

10+ Support | 4K Upscaling | HDMI Black Level | Color Booster Pro | HLG (Hybrid

Log Gamma) | Mega Contrast | Supreme UHD Dimming | Motion Xcelerator | HDR

Brightness Optimizer | Filmmaker Mode | Film Mode

Warranty Information: 1-year manufacturer warranty and 1 year additional on Panel

from date of purchase on the television set and 12-month warranty on the remote

control. Warranty claims can be processed using the Amazon e-invoice

Additional Information : Brand Warranty can be availed using invoice. User manual

can be accessed from brand website under About this item/ Product details section.

Digitally signed by AMIT

Supply, Installation, testing and commissioning of 8 Channel Amplifier

Amplifier Type:Amplifier and Speakers should be from the same OEM to avoid any

compatibility and functional challenges. Built in DSP, Dante Enabled.

Number of Channel:Should support minimum four Input & four output channel

Frequency Response:Should be 20Hz - 20Khz or be er

Power Output:Should support minimum 125W or more, with power sharing. Also

8 Channel should work on both 4/8 ohms and 70/100V.

Amplifier Input Sensi vity:Should be 1.58V or be er

THD+ N Ra o:Should be .1% (max.)

SNR (A-weighted):113dB or be er

Damping FactorShould be be er than 100

Digital Signal Processing48khz or be er

Opera ng Mains Voltage Should support 230V(±10%) 50Hz

MAF must be submitted from OEM

Supply, Installation, testing and commissioning of two-way coaxial Ceiling Speakers

lLF Drivers: 6 inch or be er

HF Drivers: 1 inch or be er

Frequency Range (-10 dB):Should be 50 Hz – 18 kHz or be er

Power Ra ng:Should support Minimum 300W Peak and 75W Con nuous

Transformer Taps:"70 V: 60 W, 30 W, 15 W & 7.5 W

4 Ceiling Speakers 6 ₹ 19,500.00 ₹ 117,000.00

Direc vity:4 or Be er

Impedance:Should be 8 Ohms

Coverage Angle (H):120° conical

Maximum SPL (pk):Should be 115dB @1m or be er

Sensi vity @1m:Should be 90dB or be er

Enclosure Material: Bezel-less Grill should be Paintable; Backcan: Powder-coated

formed steel Baffle: PC/ABS, flammability rated UL 94 5VB; RoHS; UL 2043, NFPA

90A & NFPA 70; Operating temperature: 0° C to 45 °C

MAF must be submitted from OEM

Digitally signed by AMIT

Supply, Installation, testing and commissioning of two-way coaxial Column Speakers

LF Drivers: Should have Minimum Two 4.5-inch x 2-inch woofers

HF Drivers: Should have atleast One x 1-inch tweeters

Frequency Range (-10 dB):Should be 75 Hz – 18 kHz or be er

Frequency Response (±3 dB):Should be 110 Hz – 18 kHz or be er

Power Ra ng:Should support Minimum 300W Peak and Minimum 150W or be er

Continuous Program Power

Transformer Taps (70V / 100V):Should support tapping at 20W, 10W, 5W @ both

70V & 100V with Less than 1 dB Transformer Insetion loss for all taps

Impedance:Should be 8 Ohms

Coverage Angle (H):Should be in range of 150°- 180°

Coverage Angle (V):Should be in range of 100°- 120° with flexibility of 8°-10° down-

tilt to vertical aiming or better

5 Column Speakers Maximum SPL (pk):Should be 110dB @1m or be er 2 ₹ 35,600.00 ₹ 71,200.00

Sensi vity @1m:Should be 85dB or be er

Direc vityShould be in range of 7-8 with a Direc vity Index in range of 8- 9db

Enclosure Material: Should be PC + ABS, UL94-V0 flammability ra ng,

Moun ng:Should be supplied with Swivel (Pan) / Tilt WALL BRACKET which

provides Horizontal left-right swivel: ±95° degree; adjustable +0°/-10° Vertical tilt;

WALL and SPEAKER sections of WALL BRACKET ASSEMBLY attach together via

included M6 x 12 mm bolts, flat washers, and lock washers. L-brackets that can be

positioned on either top & bottom as per the requirement at site.

Ra ngs:Should haveTransformer UL recognized, RoHS, IEC62368-1

Deliverables:"SPL: Considering ambient noise levels to be 65-70 db, proposed

speaker solution shall operate at +80db max going up to 95db. Ease reports need to

be submitted to support the results.

MAF must be submitted from OEM

Digitally signed by AMIT

Video StandardsLatest video standards H.264, H.265

Video Frame RateShould support 60 fps with 1080p resolu on.

Video FeaturesAbility to send and receive two live simultaneous video sources in a

single call, so that the image from the main camera and PC or document camera can

be seen simultaneously. Presentation should be supported with resolution upto

4K15fps and 1080p60fps.

Should support H.239 and BFCP protocols

Video InputShould have at least 1 x HDMI inputs to connect 4K cameras at

4Kp30fps. Camera should connect directly to the codec.

Must have 2 addi onal HDMI inputs to connect two laptops/PC/Camera for

presentations supporting upto 4K30fps Resolution including 1080p60fps. In Case of

2nd additional Camera, it should connect directly to the codec without requirement

of any additional device/switch.

Video Addi onal 1x USB-C input supports formats up to maximum 3840 x 2160 at 30 fps

6 Conferencing VC Unit should support 2 x Video over IP PTZ Cameras from same OEM. 1 ₹ 1,150,000.00 ₹ 1,150,000.00

Camera & Codec Should support the ability to view and share presenta ons at a resolu on upto

4K15 and 1080p60 resolution

The VC Unit should support Wireless Presenta on sharing via Airplay and Miracast.

Video OutputShould have at least 3 no.'s of 4K HDMI output to connect 4K display

devices such as plasma and projectors for both Video and Content.(Triple Monitor

Support). The codec should support upto 4K60fps resolution on all 3 Video Outputs.

PTZ Camera4K or be er PTZ Camera with 12x Op cal Zoom and 5x Digital Zoom

It should support Pan range: +/-170 degrees and Tilt range: -20 degrees to +90

Camera should have 80° horizontal field of view.

All Camera and codec should be from the same manufacturer.

Auto focus, brightness, and white balance

MAF must be submitted from the OEM

Digitally signed by AMIT

In order to provide a good user experience, the unit must be equipped with an

intuitive min 10" Touch Screen/Panel for controlling the VC unit.

Must have ability to browse the directory, serach a contact, change layouts, mute/

unmute, increase-decrease volume.

The user should have the ability to select between two presentation sources such as

a fixed PC and a laptop from the user interface. Users should also have the ability to

share presentation wirelessly.

Audio InputsShould support 3 Microphone inputs on the codec to connect 3

microphones. The Microphones should connect directly to the VC codec. Three Mic

should be supplied in day one along with minimum 15mtr cable.

The pick up of the microphones should be at least 10 feet from the microphone.

Echo Cancella on for every input must be available.

7 1x HDMI Audio Input for content audio 1 ₹ 650,000.00 ₹ 650,000.00

Audio standards supportedG.711, G.722, G.722.1, 64 kbps MPEG-4 AAC-LD

standard must be supported..

Other Desirable Audion featuresNoise Reduc on, Automa c Gain control, Acous c