Equipment

Type: Benchtop Laboratory Fume Hood without accessories; Application: Suitable for safe handling of chemical fumes, vapours, and low-to-medium hazardous laboratory applications; Size: Minimum 5 feet width benchtop fume hood; Design: Aerodynamic fume hood design with smooth airflow and minimum turbulence; Airflow Type: Auto-bypass/constant volume airflow design or equivalent; Face Velocity: Designed to maintain uniform face velocity of 0.4 to 0.6 m/s or equivalent as per laboratory safety requirement; Sash: Vertical sliding transparent toughened safety glass sash with smooth movement; Sash Mechanism: Counter-balanced sash mechanism for safe and easy operation; Work Chamber: Chemically resistant inner work chamber suitable for laboratory fume handling; Outer Construction: Powder-coated GI/MS/CRCA steel or equivalent corrosion-resistant construction; Inner Lining: Chemical-resistant liner such as compact laminate/phenolic resin/FRP/ceramic or equivalent; Work Surface: Chemical-resistant worktop with raised edge/spill containment provision; Airfoil: Front airfoil profile to improve airflow and reduce turbulence; Baffles: Rear baffle arrangement for uniform exhaust of fumes; Exhaust Connection: Exhaust collar/outlet provision for connection to external ducting system; Lighting: Inbuilt illumination provision, if part of standard fume hood supply; Safety Standard: Design should comply with ASHRAE 110/EN 14175 or equivalent fume hood safety standard; Power Supply: 230 V, 50 Hz power supply for inbuilt electrical provisions, wherever applicable; Excluded Accessories: Blower, ducting, exhaust stack, scrubber, base cabinet, sink, service valves, electrical sockets, gas cock, water tap, and other accessories are not included unless separately specified; Installation Requirement: Bidder shall indicate site requirements for exhaust ducting, blower, and utilities separately; Warranty: Minimum 1-year comprehensive warranty. Type: Laminar Air Flow Cabinet; Application: Suitable for providing a clean air working environment for sample preparation, media handling, microbiology, tissue culture, and general laboratory applications; Working Area: Minimum 6 ft × 2 ft × 2 ft; Internal Dimensions: Approximately 1828 × 610 × 610 mm or equivalent; Airflow Direction: Horizontal/vertical laminar airflow as per site and user requirement; Cleanliness Class: ISO Class 5/Class 100 or better; HEPA Filter: H13/H14 HEPA filter with minimum 99.97% efficiency at 0.3 micron particle size; Pre-Filter: Washable/replaceable pre-filter to protect HEPA filter and blower assembly; Air Velocity: Uniform airflow velocity of approximately 0.3 to 0.5 m/s or equivalent; Blower Assembly: Dynamically balanced low-noise blower suitable for continuous operation; Noise Level: Low-noise operation, preferably ≤65 dB; Work Surface: Stainless steel work surface, SS 304 or equivalent; Body Construction: Powder-coated MS/GI outer body with stainless steel work zone or equivalent laboratory-grade construction; Side Panels/Front Panel: Transparent acrylic/toughened glass panels as per cabinet design; Illumination: Inbuilt LED/fluorescent white light for work area illumination; UV Lamp: Germicidal UV lamp with safety interlock/timer provision; Pressure Indication: Magnehelic gauge/digital pressure indicator for filter condition monitoring; Electrical Socket: Internal electrical socket provision for small laboratory equipment; Control Panel: User-friendly control switches for blower, light, UV, and power; Power Supply: Suitable for operation on 230 V AC, 50 Hz, single-phase power supply; Stand: Suitable powder-coated/stainless-steel support stand to be supplied; Safety Features: UV safety provision, electrical protection, and airflow/filter monitoring provision; Validation/Test Report: Factory test certificate/validation report for HEPA filter efficiency, airflow velocity, and cleanliness class to be provided; Warranty: Minimum 1-year comprehensive warranty.