REPAIR/REPLACEMENT OF PERIMETER LIGHTS, HIGH MAST LIGHT FITTINGS WITH ACCESSORIES INCLUDING REPAIR TO STREET LIGHT DG SETS, PANEL AND CONNECTED ACCESSORIES AT AKHNOOR UNDER GE (S) AKHNOOR

Amount

Dismantling and taking down deffective high mast light fittings with complete assembly by engaging suitable heavy duty crane/ Hydra machine from pole upto 20 mtr height using electrically operated winch, repairing and refixing after replacing all unserviceable parts/flood lights including internal wiring complete all as specified and directed by Engineer-in-Charge. (Note : (a) Light fittings shall be measured and paid for separately as supply only. (b) Spares such as steel wire, winch motor, cable etc shall be measured and paid for separately as supply Only. c) The entire work shall be carried out by well experienced professionals who has already carried out the high mast poles dismantling /repair works and similar works under the presence of High Mast Manufacturer's rep. d) Cost Minor fittings/fixtures such as screws, bolt/nuts, grease etc shall provided by the contractor without any extra cost to the Govt to make fucntional lights and testing thereto and nothing shall be admissible on this ground.

Supply only stainless steel rope twisted of size 10 mm dia with necessary connections proper binding on both sides from bottom drum to high mast top connection hook , complete all as specified and directed by Engineer-in-Charge.

Supply only fractional 1.5 HP motor 415 volts suitable for electrically operated high mast light, complete all as specified and directed by Engineer-in-Charge.

Supply only PVC insulated, PVC sheathed multistranded copper conductor cable of size 4.00 sqmm 4 core , complete all as specified and directed by Engineer-in-Charge.

Supply only LED Flood light, powder coated pressure die cast with aluminium housing & frame with heat resistant toughened clear glass fixed with SS screw. / Anti Dust Exposed Lens,sturdiness and embossed brand name/logo name of manufacturer on fixture. The fixture should have a minimum system efficacy of 150 lumen/Watt and a minimum system lumen output of 18000 lumens and maximum system wattage of 150 Watts.The fixture shall have a CRI of minimum 70. The fixture shall be designed for a system life of 50,000 hours @70% lumen maintenance. Ingress Protection of IP66 (lamp and gear Compartment) and Mechanical Impact Resistance Rating of IK >=07.The fixture driver should have an operating voltage range of 120-277 V, surge protection of internal 4KV and extral surge protection of10KV, PF >0.95 , THD<10%. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters , complete all as specified and as directed by Engineer-In-Charge. Make : Havells Model No Jeta Iris and cat part No . JETAIRISFLS150WLED757P2AV2WBLTG or Crompton Model No PLUTO NEO and cat part No LFLN-150-CDL/60-HPM or Equivalent makes in Wipro/Philips. Warranty certficate for 2 years to be provided by Employee of Organization of Terittory.

Supply only Integral LED aviation light fittings Integral LED aviation light comprising of aluminium housing with polycarbonate enclosure Make : Bajaj Cat Part No BGAV 302 LED or equivalent in Crompton/ Havells/Philips

Disconnecting and taking down the existing perimeter/street light fittings of any type and any specifications or any accessories related to tperimeter/street light fittings of any descriptions, fitted/ fixed on poles, buildings or watching towers of any heights and any location, and re-fixing the same after necessary repairs/ replacement of defective parts including rectifying the same as per directions by concerned JE E/M and Engineer-In-Charge, at various locations, complete all as specified and directed by Engineer-In-Charge. Note: (i) Cost of T&P, ladder or mechanical lift shall be deemed included in quoted rate. (ii) Supply of spare parts of timer switch shall be measured and paid separately under relevant items of Schedule ‘A’/ BOQ. (iii) Cost of connecting up with twin core twisted flexible copper conductor cable with suitable size shall also deem to be included in the quote rates.

Supply only electronic LED driver for LED light fittings, capacity 45/ 50 Watt, 50Hz, complete all as specified and directed by Engineer-In-Charge. Make: Havells/ Crompton /Wipro/ Phillips

Supply only electronic LED driver for LED light fittings, capacity 60 Watt, 50Hz, complete all as specified and directed by Engineer-In-Charge. Make: Havells/ Crompton /Wipro/ Phillips

S&F of high-quality integrated LED Street Light with a minimum system lumen of 6600 Lm and system wattage not exceeding 60W with a nominal efficiency 110 lumen/watt. CCT of 5700K with SDCM of < 5 and CRI >70. The housing should be of made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens with Toughned Glass having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK07 to with stand extreme environments with PF > 0.95. Lifetime of 50K hours @L70.The Ingress protection should be minimum IP 66 with an IK rating of 07. The Luminaire should have 4KV internal 10KV external surge protection in the Luminaire.Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters and including suitable size and length of flexible copper wire and making the connection including House service bracket for mounting light fittings House service bracket any type complete with 1.50mtr long galvanised iron pipe 40mm dia medium grade, bent to required shape including mild steel clamps of flat iron 40x6mm, hook, stay, nut, bolt and washer including painting with two coats of synthetic enamel paint over one coat of red oxide primer , complete all as specified, complete all as specified. Make : Havells model No ENDURA SUNDOWN TG , Cat Part No ENDURASUNDOWNSL60WLED765PASYBOTG or Crompton model No RAPTOR PRO - I , Cat Part No CRP-409-60-57-SL-GL-NSG or Equivalent makes in Philips/Wipro. Warranty certficate for 2 years to be provided by Employee of Organization of Terittory.

Supply and fixing in repalcement bracket made out of GI pipe 1.5 Mtr long, 40 mm dia light grade bent to shape as directed including clamps made out of 40 mm x 6 mm flat for fixing bracket suitable for PCC poles including nuts and bolts, washers and other connected items of required size including painting with one coat of aluminium paint over a coat of red oxide/primer all as specified and as directed.

Disconnecting and taking down the existing unserviceable post top lantern/ gate/ garden light fittings from gates/ poles of any type or any make for cleaning by removing the dusts, insects from the inside of compartment, repair/replacement of unsv spares and re- fixing the same complete all on the directed by Engr-in-Charge Note - (a) Spare parts will be measured and paid for seperately. (b) Note: (Cost of necessary PCC work in M-15(1:2:4), type B-1 (using 20mm graded crushed stone aggregate), form work and demolition of existing PCC as diretced & touch up work if required to make existing surface as existing etc shall be deemed to have inlcuded in quoted ratesshall deemed to be included in the quoted rates.

Supply Only IP65 Rated LED Bollard of 10 W with robust design and efficient light distribution including grouting (Foundation) in M-15 Nominal mix PCC type B-1 using 20mm graded crushed stone aggregate 30CMx30CMx30CM and making connetion, complete all as specified and directed by Engineer-In-Charge. Make: Crompton cat part No- LBLTW-10-WW or Equivalent Makes in Havells/Philips/Wipro

Supply Only LED Post Top with a system lumen output of 1625 lumens and a minimum system efficacy of 70 lm/W. The luminaire should have a color temperature of 3000K to 5700K and CRI > 70. The luminaire shall meet IP65 & IK07 protection with THD < 10% and PF > 0.95. The luminaire shall have Cast aluminium spigot housing with Opal acrylic diffuser. The total power consumption should not exceed 20W (including driver), complete all as specified and as directed by Engineer-In-Charge. Make : Havells cat part No LHDC11126099 or Equivalent makes in Crompton/Wipro/Philips. Warranty certficate for 2 years to be provided by Employee of Organization of Terittory.

Supply only New generation, IP 65 LED post-top family, energy saving, environmental friendly, The total power consumption should not exceed 15W, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. Clear Cover offers bright illumination for different applications clear suitable for mounting on existing Brick pillar gates/ poles of existing pipe of 40/50 mm dia all as directed Make : Havells Cat No RUBYMINIPT15WLED757PSYMTOPC or equivalent in Crompton/ Philips/Wipro

Supply only GI pipe light grade of size 40 mm dia of any height mounted on PCC fdn at existing position all as directed by Engr-in-Charge

Supply only GI pipe light grade of size 50 mm dia of any height mounted on PCC fdn at existing position all as directed by Engr-in-Charge

Taking down existing solar street light fittings with solar panel from poles, cleaning the solar panel, removing burnt/ damage sensor, battery and auto system from battery box, repair the wiring with copper wire of suitable size including replacement of spares all as directed (Spares parts will be measured and paid separately

Supply only Solar plate of capacity 200 watt in suitable size as per existing panel, complete all on the directed by Engr-in-Charge

Supply only LMLA battery, 12 Volts 60 AH with end terminal of suitable size, complete all on the directed by Engr-in-Charge

Supply only automatic time sensor including internal connection cable of suitable size, complete all on the directed by Engr-in-Charge

Supply, laying commissioning, testing of the XLPE LT cable 1100 volts grade of size 50 Sqmm 3.50 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches/fixing on wall in PVC conduit pipe with the help of clamp/shadels, under road crossing through protection pipe etc after taking out existing under ground cable complete all as specified and directed.

Supply, laying commissioning, testing of the XLPE LT cable 1100 volts grade of size 10 Sqmm 2 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches/fixing on wall in PVC conduit pipe with the help of clamp/shadels, under road crossing through protection pipe etc after taking out existing under ground cable complete all as specified and directed.

Supply, laying commissioning, testing of the XLPE LT cable 1100 volts grade of size 6 Sqmm 2 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches/fixing on wall in PVC conduit pipe with the help of clamp/shadels, under road crossing through protection pipe etc after taking out existing under ground cable complete all as specified and directed.

Excavation in trenches in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable,erection of poles, stays, pipes etc and not exceeding 10sqm on plan and getting out all as directed.

Returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm all as specified.

Removal of excavated material n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above in starting point.

Sand cushioning to protection of underground cables, laid 8 Cm before laying and 15 Cm after laying of cable, and punned to form an overall layer of 18 Cm thick, complete all as specified and directed by Engineer-In-Charge. Note: Punned thickness shall be measured.

Sub class ‘B’ bricks, modular size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning for mechanical protection of cable, with width equal to the length of the brick, complete all as specified and directed by Engineer-In-Charge.

S&F of high-quality integrated LED Street Light with a minimum system lumen of 4950 Lm and system wattage not exceeding 45W with a nominal efficiency 110 lumen/watt. CCT of 5700K with SDCM of < 5 and CRI >70. The housing should be of made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens with Toughned Glass having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK07 to with stand extreme environments with PF > 0.95. Lifetime of 50K hours @L70.The Ingress protection should be minimum IP 66 with an IK rating of 07. The Luminaire should have 4KV internal 10KV external surge protection in the Luminaire.Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters and including suitable size and length of flexible copper wire and making the connection including House service bracket for mounting light fittings House service bracket any type complete with 1.50mtr long galvanised iron pipe 40mm dia medium grade, bent to required shape including mild steel clamps of flat iron 40x6mm, hook, stay, nut, bolt and washer including painting with two coats of synthetic enamel paint over one coat of red oxide primer , complete all as specified, complete all as specified. Make : Havells model No ENDURA SUNDOWN TG , Cat Part No ENDURASUNDOWNSL45WLED765PASYBOTG or Crompton model No RAPTOR PRO - I , Cat Part No CRP-409-45-57-SL-LM-NSR or Equivalent makes in Philips/Wipro/. Warranty certficate for 2 years to be provided by Employee of Organization of Terittory.

Supply and fixing in replacement of PVC junction box of size 250MMx200MMx105MM (Inside Dimn) mounted on GI pipe with MS clamp made out of 40 mm x 6 mm flat for fixing box on pole/wall including terminal point mounted on epoxy insulator for cable connection with 01 No MCB SP 10 amps complete all as directed. Make: Sintex/Havells/L&T.

Replacement of automatic timer switch astronomical type of capacity 32 amps 230 volts suitable for controlling of light fittings all as directed by Engr-in-Charge. Make : Indoasian cat No TL032ASO or equivalent in Legrand /L&T/ABB

S&F in replacement of Earthing complete with galvanised steel earth plate electrode 60 cm x 60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level. connecting to the GI wire 4 mm dia by means of bolls, nuts, check nuts and washers of galvanised iron and earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and handle of 6mm dia MS bar made to shape, GI medium grade 20mm bore pipe for watering , perforated at bottom. 1.75 metre long placed on top edge of earth plate. charcoal and common salt filling with fixing arrangement, funnel wire mesh and earth work in soft soil returning filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate 3 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion. NOTE :- (i) Item of earthing includes cost of 7.5 m long GI wire of size 4 mm dia with protection pipe of 15mm dia GI medium grade, any variation in length shall be adjusted through deviation order based on SSR rates enhanced by (-40)%. (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost.

Disconnecting all electric connections from alternator and fuel connection from engine, decoupling of engine and alternator, strip opening of diesel driven generator of capacity 30 KVA for repair, complete for carrying out overhauling after de-assembling the engine assembly, cleaning/washing the engine block and other spares parts replacement defective parts with new spare parts as required for smooth functioning of diesel engine and strip opening of alternator for repair and replacement of old defective spare parts, metalling, welding, grinding, lathe machine work required at workshop including re-assembling the engine in existing position or a location as directed complete and testing on load all as specified and as directed by Engr-in-Charge. Note : (a) New spare parts will be measured and paid separately as supply only under the respective items. (b) Cost of cleaning, welding, minor repair and special tools and plants required for dismantling engine will deemed to be included in quoted rate. (c) Transportation cost of diesel engine/ alternator to workshop and return back shall deemed included in quoted rate.

Supply only following new spare parts required for DG set and alternator of capacity 30 KVA (a) Linear piston Ring set

(b) Valve guide set

(c) Main Le Bearing

(d) Big end Bearing set

(e) Engine packing kit

(g) Engine oil

(h) Diesel filter

(j) Lub Oil filter

(k) Oil pump set complete

(l) Oil seal set

(m) Head gasket

(n) Fan belt

(o) Thrust washer set

(p) Self starter assy

(q) Connecting rod bush

(r) Charging alternator

(s) Hose pipe set

(t) ignation switch

(u) Volt meter

(v) ammeter

(w) Coolant fluid suitable for radiator of DG set

SPECIAL NOTE FOR DG SETS AND VOLTAGE STABLIZER'S & REPAIR OF PUMPS: The contractor will submit a copy of Memorandum of under standing from OEMs ( or authorized dealers) for the respective E/M installations before start of repair work. The details of OEMs are as under:- (a) DG Set (i) Kirlosker Green/Cummins (ii) Crompton Greaves (iii) Sudhir (iv) Mahindra (b) Servo Voltage Stablizer (i) Vinitek (ii) Electric field (c) Submersible and Centrifugal Pumps (i) Kirloskar (ii) KSB (iii) Jyoti

Amount of Schedule of credit of for Rs 59,020.00 shall be deducted from quoted amount.

M/S DC CONSTRUCTIONS

sahni construction co