Providing Flood Light to volley ball court and Cricket pitch near Staff Recreation Club Building, in NITK, Surathkal.

Amount

Supplying LTUG cable: Supplying LTUG cable having Aluminium conductor PVC insulated, sheathed, galvanised, steel wire/steel tap armoured cable with PVC outer sheathing 1.1 KV class. Earth work excavation .35sqmm 3.5 core

Supplying LTUG cable: Supplying LTUG cable having Aluminium conductor PVC insulated, sheathed, galvanised, steel wire/steel tap armoured cable with PVC outer sheathing 1.1 KV class. Earth work excavation .16sqmm 4core

Laying of cable: Laying of cable in the Existing trench/GI pipe /stoneware/RCC hume pipe using wooden/aluminium rollers. LT cable

Supplying and drawing: flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and PVC insulation sheathed suitable for working voltage up to 1100 volts. Make; Polycab, RRKable, Anchor.

Fabricating, Supplying and erection of ms long hot dip Galvanised pole with BSEN 10025 grade S35JO steel plate for shaft, IS2062 For base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCB as per IS 9595/IS 10178A WS having dimensions bottom mm, top mm with 3mm thick suitable base plate and 4nos of long J bolts along with template and the pole shall be hot dip galvanised in single dipping with not less than 65micron as per ASTM-A123 AND 153 etc(excluding foundation) as per drawing appended. 7m-Top 75mm and bottom 145mm dia

Supplying and fixing angle iron frame work fabricated out of MS angle iron and MS flat with bolts, washes etc, and painted with 2 coats of red oxide and then two coats of approved paint. 50 x50x6mm

Providing and fixing steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hosting, fixing in position and applying a priming coat of approved steel primer, including wielding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of plate.

Supplying, fitting and placing TMT FE 550/550D Steel reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, aping/welding joints, typing wit binding wire/soft annealed steel wire and other ancillary operations complete as per drawing and technical specifications.

Providing and laying in position cement concrete for all foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vbrators,including all lead & lifts, cost of all materials, quality conforming to the requirements of relevant IS codes,labour,usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications:M20 design mix using 20mm nominal size grade crushed coarse aggregates

Supply of LED flood light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti-glare clear diffuser with injection moulded polycarbonate/clear glass material, delivering superior light output rated life burning hours 50000 hr @ lumen maintenance of 70%, CCT>5500K,IP66 optical and electrical compartment & impact resistance of complete luminaire >IK 08.Power factor >0.9 with mains, surge protection-min5KV along with over voltage/over load, short circuit/mis wiring protection.Compitable for pole mauling with outer dia of40mm to 50mm universal voltage driver to operate wide voltage range from100v to 270v application. Compliance to IS10322/IEC60598, LM79 & LM 80 adherence with RoHS.UL approved MCPCB.Top access street light with single screw to ensure ease of maintenance at the sight site location with minimised minimal tools, LED light fixture with W system power consumption LED efficiency.1310m/w, nominal CRI>75. Luminaire manufacturer should have in house facility. LED Flood light 150W

Supplying and fixing MCCB over the existing panel board using necessary screws, bolts nuts necessary phase separators handle and wiring complete protection of overload and short circuit with adjustable thermal magnetic release, microprocessor release shall have earth fault as per IS/IEC 60947-2.Inn 4 pole MCCB all poles should have protection for short circuit/over;load.For microprocessor MCCB facility for segregating priority and non-priority loads must be available in the MCCB.MCCB shall be provided with double insulation.Multippole breakers shall be 4 pole. 100A 25kA

Supplying and fixing Regular MCCB distribution panel confirming to IS/IEC 61439-3 and IK09 tested as per IS/IEC62262 with minimum IP43 protection provided with PUR gasket with suitable earthing system on wall /wood board/flush mounting using required cl A bolts ,nuts etc with provision for fixing of suitable type capacity MCCB’s as an incomer for 3 phase double door with necessary busbar completely wired to use on 440v powder coated painting etc complete with a provision n for fixing of single /3 phase suitable capacity MCB’s as outgoings confirming to IS/IEC. 4way Make: Legrand, ABB, Havells,

Route and joint indicating slab with MS anchor rod for cable routing.

Fixing Halogen/metal halide/SVL/LED flood light fitting over existing pole/wall ceiling including clamps, bolts. nuts and wiring using suitable capacity wires including scaffolding and ladders

Supplying and fixing following miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and ‘C’ Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC 60898. Make: Legrand, ABB, Havells, Schinder, Anchor -- 63A TPN MCB

Supplying and fixing following miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and ‘C’ Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC 60898. Make: Legrand, ABB, Havells, Schinder, Anchor -- 32A DP MCB----

Supplying and fixing chemical earthing for grounding, conduits cut-outs & other equipment’s backfill compounds which is noncorrosive, thermally conductive, potential to permissible limits superior fault conduction capacity, nontoxic weather resistance &capable of achieving ohmic value less tan one ohm.

GI/Copper strips for grounding connections, using necessary fixing materials as required. 25×3mm GI strip for earthing

Raaj power solutions and facilities (BID ID -3180598)