SPECIAL REPAIR REPLACEMENT MAINT OF WATER INSTALLATION WATER PIPE LINE AND ALLIED WORKS IN FORT AREA AND OTHER SANCTONED WORK UNDER GE (WEST) FEROZEPUR CANTT

Amount

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and not exc 10 Sqm on plan, for laying of cable/pipe, shafts, wells, cesspits, manholes pier holes etc and getting out soft/loose soil, compete all as specified and directed.

Returning, filling in, earth including spreading, leveling watering and well ramming in layers each not exceeding 25cm thick each layer, complete all as specified and directed.

Removal of surplus soil to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.5 metre above the starting point complete all as specified and directed.

Taking up HDPE/PVC watermains (including all fittings) of 150 mm dia complete all as specified and directed.

Taking up cast iron watermains (including all fittings),with spigot and socket ends and lead joints including burning out joints and recovering lead 150 mm dia complete all as specified and directed.

Taking up HDPE/PVC watermains (including all fittings) of 100 mm dia complete all as specified and directed.

Taking up GI watermains (including all fittings), 100 mm dia complete all as specified and directed.

Taking up HDPE/PVC watermains (including all fittings) of 80 mm dia complete all as specified and directed.

Taking up existing steel water tubing, 80 mm bore alongwith connections complete all as specified and directed.

Taking up existing steel water tubing, 40 mm / 50 mm bore aalongwith connections complete all as specified and directed.

Taking up or down existing steel water tubing, 25mm bore alongwith connections complete all as specified and directed.

Taking up or down existing steel water tubing, 20 mm bore alongwith connections complete all as specified and directed.

Taking up Old unserviceable sluice valves and NRV of dia 150, 100, 80 mm complete all as specified and directed.

Taking up Old unserviceable gate valves of dia 40 to 50 mm complete all as specified and directed.

Taking up Old unserviceable gate valves of dia 25 mm complete all as specified and directed.

Taking up Old unserviceable gate valves of dia 20 mm complete all as specified and directed.

Supply and lay in replacement of Centrifugally cast (spun) ductile iron pressure pipes with spigot & socket end, 150 mm dia class K-7 conforming to IS: 8329/2000 complete with (push-on) rubber gasket jointing and centrifugally applied inside cement mortar lining with portland slag cement as per IS: 455:1989 and external metallic zinc coating as per annex A of IS 8329 with finishing layer of Bitumen coating as per Annex C of IS: 8329. The standard lengths of the pipes are 5.50 meter (subject to tolerance as per clause 15.5.1 of IS: 8329:2000). Pursuant to clause 15.5.1 of IS8329, 10% of pipes in each size, may be supplied in shorter lengths, complete all as specified and directed.

Supply and lay in replacement of Centrifugally cast (spun) ductile iron pressure pipes with spigot & socket end, 100 mm dia class K-7 conforming to IS: 8329/2000 complete with (push-on) rubber gasket jointing and centrifugally applied inside cement mortar lining with portland slag cement as per IS: 455:1989 and external metallic zinc coating as per annex A of IS 8329 with finishing layer of Bitumen coating as per Annex C of IS: 8329. The standard lengths of the pipes are 5.50 meter (subject to tolerance as per clause 15.5.1 of IS: 8329:2000). Pursuant to clause 15.5.1 of IS8329, 10% of pipes in each size, may be supplied in shorter lengths, complete all as specified and directed.

S&F in replacement of galvanised iron steel tubing 80 mm (3") bore ISI marked medium grade with all fittings (ISI marked) duly laid in trenches complete all as specified and directed.

S&F in replacement of galvanised iron steel tubing 50 mm (2") bore ISI marked medium grade with all fittings (ISI marked) duly laid in trenches complete all as specified and directed.

S&F in replacement of galvanised iron steel tubing 40 mm (3/2") bore ISI marked medium grade with all fittings (ISI marked) duly laid in trenches complete all as specified and directed.

S&F in replacement of galvanised iron steel tubing 25 mm (1") bore ISI marked medium grade with all fittings (ISI marked) duly laid in trenches complete all as specified and directed.

S&F in replacement of galvanised iron steel tubing 20 mm (3/4") bore ISI marked medium grade with all fittings (ISI marked) duly laid in trenches complete all as specified and directed.

S&F in replacement of Valves, Sluice, flanged of class PN 1.6, 150 mm (6”) dia complete with steel spindle complete all as specified and directed.

S&F in replacement of Valves, Sluice, flanged of class PN 1.6, 100M dia (4") complete with steel spindle complete all as specified and directed.

S&F Stop valves 20 mm dia pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F Stop valves 25 mm dia pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F Stop valves 40 mm dia pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F Stop valves 50 mm dia pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

M&L CI fittings for spigot & socket pipes, bends (any type radius and angle) Tapers any type(straight bend increasing,decreasing or double socket etc) Tee pieces single branch junction double branch cross(all sockets or sockets & spigot. Collars,caps and plugs etc suitable upto 150 MM bore pipe complete all as specified and directed.

M&L cutting existing road straight by manual, depth and width not less than 45cm for pipes upto 150 mm dia & filling back with excavated soil upto 75% road portion & 25% shall be made with cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate complete all as specified and directed

M&L valve pit of size 125cmx125cmx125cm in brick masonry for sluice valves constructed completely with 3.15 mm thick mild steel sheet cover, angle iron frame and locking arrangement including earth work, PCC, plastering and painting etc. suitable for 150mm to 200 mm dia valves complete all as specified and directed.

M&L for Valve pit of size 120cmx120cmx120cm in brick masonry for sluice valves constructed completely with 3.15 mm thick mild steel sheet cover, angle iron frame and locking arrangement including earth work, PCC, plastering and painting etc. suitable for 100 mm dia valves complete all as specified and directed.

M&L valve pit size 75cmx75cmx75cm in brick masonry for sluice valves constructed completely with 3.15mm thick mild steel sheet cover, angle iron frame and locking arrangement inclduing earth work, PCC, plastering and painting etc. etc suitable upto 80 mm dia valves complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L PCC 1:4:8, type D2 (using 40mm crushed stone agregate) as in foundation filling and mass concrete, complete all as specified and directed.

M&L for RCC 1:1½:3, (using 20mm graded stone aggregate) as in roof slab complete all as specified and directed.

M&L use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick complete all as specified and directed.

M&L RCC1:1½:3, (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span and similar work complete all as specified and directed.

M&L use and waste of formwork to sides and soffits of floor or roof beams, beam similar work to rough finish surface of concrete flat complete all as specified and directed.

M&L fine aggregate (sand) for concrete and spreading leveling watering & well ramming in layers not exceeding 25 cm thick of soil complete all as specified and directed.

S&F mild steel bars 10mm dia and over, cut to length, bent to shape as required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L TMT mild steel bars 6mm to 8mm dia,as in stirrups cut to length, bent to shape as required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.

Demolition of brick work built in cement mortar of any specification and in any position complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exceeding 6 meter mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base, sub floor 75 mm thick complete all as specified and directed.

M&L 50mm thick PCC 1:2:4, type B-2 (using 40 mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M&L non-skid coloured ceramic tiles of 7mm to 8 mm thick, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match the colour over a screed layer of 15 mm thick in cement mortar 1:6, complete all as specified and directed.

M&L non-skid ceramic tiles 7mm to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour over a screed layer of 15 mm thick in cement mortar 1:6 including demolition of old tiles, complete all as specified and as directed.

M&L non-skid coloured ceramic tiles of 7mm to 8mm thick, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in skerting/dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match and backing with 10 mm thick in cement mortar 1:4 including demolition of old tiles, complete all as specified and as directed.

M&L 350mmX 250mm/ 450mmX 350 and 7mm thick glazed coloured (digital colour) ceramic tiles on vertical surface of such as skirting, dados and risers to steps etc., including 10mm thick rendering in cement mortar 1:4 on brick or concrete surface finished rough to received dado/ skirting, set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade with cement mortar bedding complete all as specified and directed.

M&L rendering 12 mm thick on wall in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement and preparation of newely plastered surfaces of wall and applying three coat of white wash complete all as specified and directed.

M&L rendering 15 mm thick in cement mortar 1:4 on external fair faces of brick/concrete work surfaces finished even and smooth (without using extra cement) including and preparation of newely plastered surfaces of wall and applying two coats cement based paint over one coat alkali resistant priming paint complete all as specified and directed.

M&L rendering 5mm thick in cement mortar 1:3 on ceiling surfaces and finished even and smooth without using extra cement and preparation of newely plastered surfaces of ceiling and applying three coats white wash complete all as specified and directed.

M&L complete removal of old existing treatment on walls, cornices etc by brooming down or steel wire brushing scrapping down smoke soot moulds, moss and efflorescence salt and trading oil decorated surface of walls and applying a coat of wall care putty of approved make as on wall surface and two coats of oil based distemper (white or tinted) complete all as specified and directed.

S&F 18 mm thick Celuka ply of grade 1 quality of one side prelaminated and other side plain white colour to make kitchen cabinet/ drawer/ cub board shutters in repair complete as specified and directed. Make: Rajshri or equivalent

S&F 18 mm thick Celuka ply of grade 1 quality of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as specified and directed. Make: Rajshri or equivalent

S&F 12 mm thick Celuka ply of grade 1 quality of both side plain white colour fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides in repair complete as specified and directed. Make: Rajshri or equivalent

S&F auto closing hinges 35 mm of 0 crank OR 8 crank openable at 110 degree for kitchen cabinet shutters, complete as specified and directed. Make: KAFF or equivalent

S&F 30mm continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete as specified and directed.

S&F mild steel guard bars/ grills fixed to wooden frames or welded to steel frames including cutting, drilling & weldind as required complete as specified and directed.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm complete all as specified and directed.

M&L for 125mm x 60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F solid PVC door frame of size 50mm X 47mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010).

S&F mild steel work as in hold fasts, bands supports, clamps, wall ties hooks including nut and bolts etc. conforming to Fe-410-0 or Fe-310-0 including welding etc. complete as specified and directed.

M&L PCC 1:2:4, type B-0 (using 12.5mm graded stone aggregate) as in holdfast including necessary form work, filling of eaves gap, filling of pressed steel chowkhats, etc. complete as specified and directed.

S&F factory made 35mm thick second class hard wood plain framed panelled shutters (any number of panels ), with panels of timber flat on both sides (feather edge), or of veneered particle board medium density wood wood particle board with commericial face veneers and fitted to chowkats complete as specified and directed.

S&F factory made 35mm thick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze, etc (without sash bars), edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S&Fing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and directed. Make: Rajshri or equivalent as approved.

M&L preparation of newly steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide complete as specified and directed.

M&L preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality with oil putty in square not exceeding 0.5m in each pane complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks,or galvanised wire staples as in repair complete all as specified and directed.

S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified and directed.

S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and directed.

S&F PTMT handle 125mm long fixed with steel screws complete all as specified and directed.

S&F 200mm long Aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed.

S&F 150mm Extruded Aluminium alloy handle complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 300mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-Aluminium alloy and fixed complete all as specified and directed.

S&F 100mm butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F brass chromium plated bib tap for iron pipe of 15mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and directed.

S&F Brass chromium plated wash hand basin mixer including Copper nipple for connecting with PVC connection 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F chromium plated cast Copper alloy one-way angle cock with flange suitable for 15mm bore pipe, complete all as specified and directed.

S&F cabinet mirror (400mm x 500mm) complete all as specified and directed. Make : Prayag Cat No.554 or techno-commercially equivalent in approved makes

S&F PVC connection 450mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and directed.

S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified and directed.

S&F vitreous China wash down water closet pan (Pedestal pattern) white including 'P' or 'S' trap and making good the disturbed surface to match with the existing complete all as specified and directed.

S&F vitreous China wash hand basin, white flat back size 550x400mm (excluding taps, waste, pipe chain and plug) but including porcelain stopper and a pair of mild steel bracket etc complete all as specified and directed. Make : 1st quality Hindware/Cera

S&F Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60gms) complete all as specified and directed.

S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement 75 mm dia outlet complete all as specified and directed.

S&F PVC waste pipe of standard pattern, not less than 75cm long , 32/40mm dia for steel sink waste coupling or urinal of suitable size complete all as specified and directed.

S&F galvanised steel tubing, medium grade, with all fitting and fixed to walls, ceilings or laid in floors 15 mm dia complete all as specified and directed.

S&F galvanised steel tubing, medium grade, with all fitting and fixed to walls, ceilings or laid in floors 20 mm dia complete all as specified and directed.

S&F ball valves of 20 mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed 20 mm dia complete all as specified and directed.

S&F gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed 15 mm dia complete all as specified and directed.

M&L white colour rotational molded triple layer polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity of the tank 500 litre including GI tank nipple of size 20/15 mm dia including dismantling of old water tank complete all as specified and directed.

M&L machine cut Kota stone slab flooring 20mm - 25mm thick over 15 mm thick cement screed 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish complete all as specifed and directed.

M&L Kota stone slab 20mm-25mm thick in skirting, etc over 15 mm thick cement screed 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish, complete all as specifed and directed.

Excavating in post holes in soft/loose soil each not exceeding 0.5 Cum, getting out, and returning filling in and ramming with concrete around, and removing surplus soil to a distance not exceeding 50 m complete all as specifed and directed.

M&L PCC 1:3:6 type C-2 using 40 mm grade stone aggregate as in foundation , filling and mass concrete all as specified and directed.

M&L mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wir etc., flat iron fillets for securing wire mesh etc) including all necessary drilling bolting or riveting etc and similar work confirming to Fe 290 Gde E-165, complete all as specifed and directed.

M&L steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240; purlins where connected to common rafters and running rails fixed with angle cleats or other connecting plates complete all as specified and directed.

S&F pre- painted galvalume Aluminium Zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

M&L point wiring complete with 1100 Volts grade PVC insulated unsheathed FRLS cable of Copper conductor, multi stranded of size 1.5 Sqmm, single core, in and including rigid non-metallic PVC conealed conduit, with all accessories if require such as bends, reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks (for housing lamp holders and light fittings etc) and mild steel pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch.

All as per Item No. 107 here-in-before but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sqmm PVC insulated Copper conductor and 2.5 Sqmm Copper conductor for continuous earthing complete.

S&F Switch piano flush type single pole one way 5/6 Amps complete all as specified and directed.

S&F Switch piano flush type 15 Amps, single pole one way complete all as specified and directed.

S&F Socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type complete all as specified and directed.

S&F ceiling rose, PVC/Polycarbonate, isolated three terminals complete all specified and directed.

S&F lamp holder PVC/Polycarbonate,isolated with back plate suitable for batten fittings including 10 Watts LED Bulb complete all as specified and directed.

S&F LED tube light fitting 18 Watts, 4 feet long decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230 Volts, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible Copper conductor cable with suitable size complete all as specified and directed.

S&F exhaust fan, steel body AC single Phase 230 Volts of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed.

S&F LED street light fitting 35 Watts, 230 Volts AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed.

S&F sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs fitted ACRYLIC window 240 Volts 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wal and making good to distrubed surface and colour matching complete all as specified and directed.

S&F MCB, Single pole 240 Volts, 6 - 32 Amps 10 KA 'B Series complete all as specified and directed.

S&F SPN 32 Amps rating 240 Volts, 10KA 'B' series miniature circuit breaker (MCB) and 32 Amps current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

M&L sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 Sqmm drawn through in and including PVC Concealed with 1 x 6 Sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia complete all as specified and directed. Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core,one run of PVC conduit shall be measured as single run.

HARBHAJAN SINGH KHARBANDA