KED 27of 2024 25 Dated 15 06 2024 for Creation of 100 KVA Sub Stationalongwith HT LT line at Plail under water supply Scheme JJM PHE in respect of Electric Sub Division Billawar of Electric Division Kathua on Turnkey Basis

Amount

Creation of 100 KVA Sub Station at Plail under JJM Scheme in respect JPDCL Electric Sub Division Billawar of Electeic Division Kathua on Turnkey Basis by way of supply Erection/ Installation,Testing Commissioning of following Material:

11/0.433kV, 100 KVA, 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level-2, (Al wound ) up to 200 KVA, copper Wound and with LV Cable Box having detachable Aluminium Gland plate.

Gapless Surge Arrestor,9 kV ,10 KA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

120 mm² (1Ckt) Single Phase Cable,1.1K V Grade, PVC Insulated Stranded Conductor FRLS type

9 Mtr. Long pole (ST-410 SP 33)

11KV Polymeric composite Disc Insulator 12kV,min failing load 45KN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

GI Channel/Angle/Flat of sizes including clamps for L.A set/G.O set/Horn Gap

Galvinized Nuts and Bolts.

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lightening Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

LT Distribution box for 100 KVA DTR with MCCB for incommer & SFU's for outgoing ckt

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Wedege connectors /PG clamps

Danger plate with clamps

GI Barbed wire for ani Clambing

3 Ph 4 Wire Trivector meter with CT

Cemetn bottomiing 1:2:4 mix as per REC standerds .5 Cum/pole

Painting of poles Red oxide

Painting of poles Aluminum Paint

Erection of HT line on 9 Mtrs. ST poles with ACSR Weasel Conductor at Plail under JJM Scheme in respect JPDCL Electric Sub Division Billawar of Electric Division Kathua on Turnkey Basis byway of supply Erection/Installation,Testing Commissioning etc of following Material:

9 Mtr. Long pole (ST-410 SP 33)

GI V cross-arm/Horizontal with top Bracket including clamp

GI Channel x-arm includingclaps and braces

30 mm² ACSR Weasel Conductor

PG Clamps for ACSR weasel conductor

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Danger Plates with Clamp

Anti Climbing Devices with clamps

Red oxcide Paint

Aluminium Paints

Cement Bottoming 1:2:4 mix as per REC Standrad 0.5 CUM per pole

Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip

Aluminium Jointing Sleeves

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Erection of 11 KV Tapping point at Plail under JJM Scheme in respect JPDCL Electric Sub Division Billawar of Electric Division Kathua on Turnkey Basis byway of supply Erection/Installation, Testing Commissioning et of following Material:

9 Mtr. Long Pole(ST-410 SP-33 )

GI V cross-arm/Horizontal with top Bracket including clamp

GI Channel/ angle iron including Clamps

11 KV GO , AB switch 3 phase , 3 pole , 200 amp vertically type

30 mm² ACSR Weasel Conductor

PG Clamps for 30mm2 ACSR conductor

11kV Polymeric composite Pin Insulator 12KV5kN, Lighting Impulse 75KV Positive and 80KVNegative, creepage distance 320mm

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Danger Plates with Clamps

Anti-Climbing Device with Clamps

Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Cement bottoming 1:2:4 Mix as per REC Standars

Aluminium Paint

Red oxide paint

Laying of LT line on 8 Mtrs. ST poles with ACSR Weasel Conductor 3Phase 4 wire at Plail under JJM Scheme in respect JPDCL Electric Sub Billawar Kathua of Electric Division Kathua Turnkey Basis byway of supply Erection/Installation, Testing Commissioning et of following Material:

8 Mtr. Long pole (ST-410 SP 15)

GI U-Clamp for Shackle insulators

Shackle insulator 16 KN

30 mm² ACSR Conductor

Galvanized Nuts and Bolts

Danger plates

Anit Climbing Device with Clamps

Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Cement bottoming 1:2:4 Mix as per REC Standars

Aluminium Paint

Red oxide paint

BALA JI CONSTRUCTIONS

M/S BETTER CHOICE AGENCIES

SAHIL SHARMA

Ishant Sharma