Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹5.9 Cr
EMD Value
₹5.9 L
Closing Date
6 Sept 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Package No. RAY-003-PHC Construction of Day care PHC at Different Locations in Rayagada District of Odisha
NBCC/ODISHA/ZO/NHM/NIT/23-24/62
NBCC/ODISHA/ZO/NHM/NIT/23-24/62
Open Tender-Domestic
Civil Works General
Rayagada, Odisha
₹11,800
₹5.9 L
6 Sept 2023
22 Aug 2023
6 Sept 2023
6 Sept 2023
14 Sept 2023
Head Description of Item Unit Qnty. Rate Amount
Earthwork in excavation in hard soil for site
leveling, foundation, pits, trenches and other
civil works upto and including 1.5metre lift
and stacking the soil upto a lead of 100 metre
2 1 and including dewatering, removing slush, 0 0.00 0.00 0.00
shoring and strutting (as required), complete
as per specification and as directed by the
Engineer-In-Charge.
Filling in foundation trenches and plinth, with
excavated earth including laying the earth in
layers not exceeding 23.5 cm thick ramming
4 3 & watering with all leads & lifts including cost Cum 190.92 135.58 25,885.32
of all labour,T&P completed as directed by
the Engineer-in-charge.
Supplying and filling sand in foundation and
over areas including watering, ramming,
consolidating and dressing, labours, tools,
taxes etc. all complete as per the
specification and direction of Engineer-In-
Diluting and injecting chemical emulsion (to
be supplied free of cost at site of work) for
PRE CONSTRUCTIONAL Anti-termite
treatment and creating a continuous chemical
barrier under and all-round the column pits,
wall trenches, basement excavation, top
perimeter of building, expansion joints, over
the top surface of consolidated earth on
which apron is to be laid, surroundings of
pipes and conduits etc. complete as per
specifications (plinth area of the building at
ground floor only shall be measured for
Providing and laying plain cement concrete
1:3:6 (1 cement : 3 sand : 6 stone agregate
40mm nominal size) as levelling course in
floor and plinth including tempering, curring,
shuttering etc. complete all depth and height.
Providing and laying plain cement concrete
1:2:4 (1 cement: 2 sand: 4 stone aggregate
12mm nominal size) as levelling course in
8 7 foundation and plinth etc. including 0 0.00 0.00 0.00
tempering, curring, shuttering etc.complete all
depth and height.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
First class Fly ash Brick masonry using
bricks of size 25 cm. x 12 cm. x 8 cm. having
crushing strength not less than 75 kg. Per.
Sqr. Cm. in cement mortar of mix( 1:6) with
ordinary Portland slag cement(PSC) and
screened & washed sand for mortar after
immersing the bricks for 6 (Six) hours in
water before use in Foundation & Plinth
including splays cutting, circular moulding,
corbelling, chamfering and similar such type
of works, watering and curing etc. including
cost, conveyance, loading, unloading,
royalties and taxes of all materials, cost of all
labour, scaffolding, sundries, T&P required
for the works etc. complete in all respect as
directed by the Engineer-in-Charge.
Fly Ash. brick masonry of size 25 cm. x 12
cm. x 8 cm. having crushing strength not less
than 75 kg. Per Sqr. Cm. in cement mortar of
mix (1:6) with approved grade cement and
screened & washed sand for mortar after
immersing the bricks for 6 (Six) hours in
water before use in Superstructure including
splays cutting, circular moulding, corbelling,
chamfering and similar such type of works,
watering and curing etc. including cost,
conveyance, loading, unloading, royalties and
taxes of all materials, cost of all labour,
scaffolding, sundries, T&P required for the
works etc. complete in all respect as directed
by the Engineer-in-charge
Half brick work with Fly Ash brick masonry in
cement mortar (1:4) in super structure
having a crushing strength of not less than 75
kg./sqcm with dimensional tolerance ± 2%
including splays cutting circular moulding
chamfering and corbelling and similar such
type of works with all necessary projections
watering and curing after immersing the
bricks in water at least for six hours before
use including cost, conveyance, royalties and
taxes of all materials with all labour,labour
cess and T & P required for the work
complete in all respect as per direction of
Engineer-in-Charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-20 grade
as per approved designs and drawings
having a minimum compressive strength (in
work test) 200 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test
conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened and
washed sharp sand for mortar of approved
quality from approved quarry, washed and
cleaned ( 20mm. size chips not to exceeds 25
% ) to be mixed in concrete mixture with
Portland slag cement (PSC) including
hoisting, lowering, laying and compaction
concrete by using vibrators, watering and
curing for 28 days, centering and shuttering
then after dismantling and removing debris
from the work site and finishing the exposed
surface smooth providing grooves or beads
wherever necessary including cost,
conveyance, loading, unloading, royalties and
taxes of all materials and cost of all labours,
sundries, T & P required of the work etc.
complete in all respect as directed by the
Engineer-in-Charge. But excluding cost and
conveyance of M.S. rods or Tor steel and
binding wires and labour charges for
straightening, cutting, bending etc. of M.S.
rods or tor steel tying the grills and placing in
proper position.
19 18 b) Column up to plinth Cum 5.85 16590.21 97,053.25
21 20 f) Column above plinth Cum 11.29 16590.21 1,87,366.69
Cutting, straightening coiled or bent up M.S.
Rod or tor steel of SAIL/ TATA / RINL
(VIZAG) make including bending, binding,
welding and joining if necessary and tying the
grills and placing in position as required for
R.C.C. Work and for providing fan hooks as
required, hoisting, lowering, laying including
cost, conveyances, taxes of M.S. Rod or tor
steel and binding wires of 18 to 20 gauge and
labour required for the work for bending,
binding and tying the grills in all floors (Linear
measurement will be taken and quantity will
be calculated basing on the standard weight
of B.I.S. for M.S. Rods or tor steel only.
Wastage if any, including weight of binding
wire will not be considered for measurement)
etc. complete as per specification & direction
of Engineer-in-charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:6 (1
34 33 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
16mm cement plaster to inside of brick
surfaces with cement mortar of mix 1:6 (1
37 36 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
6 mm cement plaster on RCC surfaces at
ceiling/slab soffit and other locations with
cement mortar of mix 1:4 (1 cement : 4
coarse sand) including necessary scaffolding,
curing etc. all complete at all floors and all
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.40 sqm. (20mm thick) of
approved make in floors laid on 20 mm thick
cement mortar (1:4) (1 cement : 4
43 42 course sand) and filling joints with slurry 0 0.00 0.00 0.00
including cost of all materials, labour T&P etc.
required for the work all complete incl.
rubbing as per direction of the Engineer-in-
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.10 Sqm & up to 0.4 sqm
(10mm. thick) of approved make in dadoes
laid on 12 mm thick cement mortar (1:3)
(1 cement : 3 course sand) and filling joints
with slurry including cost of all materials,
labour T&P etc. required for the work all
complete incl. rubbing as per direction of the
Engineer-in-charge.
Supplying, fitting & fixing of 8-10 mm thick &
size of 600x600 mm vertified floor tile of
matt finish with veilcraft (VC/FT ) shield(
Scratch free/stain free) with water absorption
limit between 0.08% to 3% and conforming
to IS : 15622:2006 (Group B Ib). laid on 20
mm thick cement mortar (1:4) (1 cement : 4
course sand) and filling joints with white
47 46 cement of approved quality including cost of 0 0.00 0.00 0.00
all materials, labour T&P etc. required for the
work all complete as per direction of the
Engineer-in-charge (for New Work only )
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting & fixing of 8-10 mm thick
and size of 600x600 mm vertified wall tile of
in dadoes, skirting and risers of steps of laid
on 12 mm thick cement mortar (1:3) (1
cement : 3 course sand) jointed with slurry
mixed with pigment to match the shades of
49 48 the tiles etc. complete including cost of all 0 0.00 0.00 0.00
materials, labour T&P etc. required for the
work all complete as per direction of the
Engineer-in-charge.
Providing and fixing seasoned sal wood work
in frames at any locations including doors,
windows,cupboard, clerestory and other
frames fixing in position including cost of
hinges, M.S. flat (30mm x 6mm) hold fasts
lugs or dash fasteners of required dia and
length as per drawing / specification, at all
floors and all heights.
Factory made 30mm/32mm flush door shutter
(Laminates both side of frame) with all labour,
iron fittings, and wooden hinged cleats etc
fitted and fixed complete in all respect.
Providing & fixing of Factory fabricated
WINPLUS® Aluminium Door Systems - For
sliding windows, made from 6063 alloy and T-
6 tempered aluminium profile, in approved
shade of hybrid /purepolyster surface coating
(50-60micron Powder Coat), mechanically
mitred & jointed with casted / aluminium
extruded corner cleats along with Sliding
window Flush Lock, Bearing Rollers ,
Siliconised Weather strip and 5mm ET 125
toughened glassas infill shall be fitted into
Shutter using siliconised microwave treated
55 54 EPDM gaskets excluding taxes of all 0 0.00 0.00 0.00
materials and cost of all labours required for
the work etc. complete in all respect as
desired by the Engineer in charge. Note -
conveyance, T&P and scaffolding are not
included herein.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing factory made 2 track 2
panel KOMMERLING uPVC white colour
sliding window comprising of uPVC multi-
chambered frame having section Frame
58mm x 49mm, Window sash: 37mm x
61mm, made out of lead free green profiles
with corners fusion welded, fully reinforced
with Galvanized steel 1.5/2.0 mm. The
windows profile should fulfill the requirements
of Viny 2010. The physical properties of the
profiles like Vicat softening temperature,
density, tensile strength, hardness,
weatherability, impact strength and Modulus
of Elasticity should be tested in accordance
with ASTM/DIN-ISO standards and the
thermal conductivity as per IS standards. The
window comprising of uPVC extruded glazing
beads of appropriate dimension, EPDM
gasket, G.I fasteners 100 x 8 mm size for
fixing frame to finished wall, plastic packers,
plastic caps and necessary stainless steel
screws etc. After fixing frame the gap
between frame and adjacent finished wall
shall be filled with weather proof silicon
sealant over backer rod of required size. The
sash will be fitted with 5mm clear glass ( float
).complete in all respect as per specification
and direction of the Engineer in Charge. etc.
Supplying and Fixing of M.S. Grills,
M.S.Doors, M.S. Gate etc including
cost,conveyance of all materials,priming,and
60 59 labour for fitting fixing etc.complete as per the 0 0.00 0.00 0.00
instruction of Engineer-in-Charge
Priming one coat with wall cement primer
(water bound) to make an even finished
surface in all floors and heights to wall
surface of approved make and shade
including sand papering, applying putty
wherever necessary & cost of scaffolding,
staging charges with cost, conveyance, taxes
of all materials, cost of all labour,labour cess
T&P etc. complete as per the direction of the
Engineer-in-charge.
Painting two coats with approved anti-fungal
weather seal paints (ISI) of approved colour,
shade on wall surface over a coat of wall
primer(ISI) water bound including sand
papering, polishing the surface, cost,
conveyances of all materials and cost of all
labour,labour cess with T&P etc, complete as
per specification & direction of Engineer-in-
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Finishing plastered surfaces of walls with
cement based wall putty (Water based) of
approved make and finishing the surface
smooth and even by sand papering to receive
painting in walls, at all heights with staging
wherever necessary with cost, conveyance,
taxes of all materials, cost of all
labour,labourcess, all T&P etc. required for
the work complete in all respect as per the
direction of the Engineer-in-charge.
Painting two coats with approved plastic
emulsion paint over a coat of wall primer of
make Dulux / Berger / Asian to inside surface
of walls finished with Acrylic Wall putty (water
based) of make (Birla / JK) and finished
smooth & even surface to receive painting
using roller to the final coat including cost of
72 71 scaffolding staging charges with cost, 0 0.00 0.00 0.00
conveyances, taxes of all materials, cost of
labour, T&P required for the work etc.
complete for all floors as per specification &
direction of the Engineer-in-charge.
Note :- Sample of Paint & Primer shall be
approved before procurement and use.
Painting two coats with approved Enamel
75 74 Paint on wood work over a coat of Wood 0 0.00 0.00 0.00
Primer in Ground Floor
Painting two coats with approved Enamel
Paint on Steel work in Ground Floor
79 78 Terrace floor Sqm 4.01 186.68 748.57
Supplying, fitting and fixing of Stainless steel
of 304 grade in hand ralling using 50mm dia
of 2mm thick circular pipe with Balustrade of
size 32mm X 32mm X 2mm @ 0.90mtr. C/C
and stainless square pipe bracing of size
80 79 32mm X 32mm X 2mm in 3 rows in stair case 0 0.00 0.00 0.00
as per approved design and specification,
buffing, polishing etc with cost, conveyance,
taxes, all materials, labour, T&P etc. required
for the complete in all respect.
2.5 cm thick grading concrete (1:2:2) on roof
slab with 6.7mm & down grades size hard
82 81 granite crusher broken chips on new work in 0 0.00 0.00 0.00
367 366 Sub-Total of Civil Works 0 0.00 0.00 80,35,088.26
368 0 Plumbing Works 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC) pipes conforming to
IS:15778, having thermal stability for hot &
cold water supply, including all CPVC plain &
brass threaded fittings including fixing the
pipe with clamps at 1.00 m spacing. This
includes jointing of pipes & fittings with one
step CPVC solvent cement and testing of
joints complete as per direction of Engineer-
370 2 20mm dia PVC ASTM pipe (sch-80) Mtrs. 30.00 291.81 8,754.42
371 3 25mm dia PVC ASTM pipe (sch-80) Mtrs. 40.00 396.01 15,840.32
Supplying all materials, labour, T&P and
providing and fixing to wall or ceiling and floor
GI/PVC pipes, class-IV (10 k.g. F/cm) on
firming I.S.4985 of the following nominal bore,
372 4 tube fittings and clamps including making 0 0.00 0.00 0.00
good the wall, ceiling and floor, testing all
complete as per specification and direction of
the Engineer in charge.
373 5 32mm dia PVC ASTM pipe (sch-80) Mtrs. 45.00 294.76 13,264.38
374 6 40mm dia PVC ASTM pipe (sch-80) Mtrs. 30.00 387.39 11,621.82
Supplying all materials, labour T&P and fitting
and fixing brass/CP fittings of the following
nominal bore with supply of all joiniting
materials including cost & conveyance of all
materials to worksite, payment of taxes etc.
all complete as per P.H specification and
direction of the Engineer-in-charge.
15mm dia CP angle stop cock (Con-CHR-
053KN Jaquar make)
15mm dia CP two in one bib cock (Con-CHR-
041KN Jaquar make)
15 mm dia CP S.B. Bib cock(CON-CHR-
15mm dia CP Long Body Bib cock (Con-CHR-
107KN Jaquar make)
20mm dia CP consealed stop cock(Con-CHR-
083KN Jaquar make)
25mm dia brass full way valve (Shakti make)
32mm dia brass full way valve (Shakti make)
40mm dia brass full way valve (Shakti make)
15mm dia CP Health faucet (Con-ALD-MCH-
573 Jaquar make)
385 17 15mm CP Extension piece Each 20.00 69.97 1,399.48
387 19 15mm size C.P. flange Each 20.00 47.55 951.08
388 20 25mm size brass ball cock with ball Each 2.00 1092.80 2,185.60
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials , labour, T&P and
fixing rotational moulded polyethylene
cylindrical vertical water storage tanks
conforming to IS:12701/1996 including
cutting holes through the tank and fixing mild
steel tubes and fittings and providing extra
sockets and jam nuts, fixing ball valve etc.
including hoisting upto a height of 5 metres
above ground level and placing the tank to
the required position and providing 5.40 mtr.
lengthx0.25 mtr width KB brickwork in
cement mortar (1:6) of 0.46m height in
staging and 0.13mtr thick circular protection
wall of 0.46mtr height to support the
tank,12mm thick cement plaster in cement
mortar (1:6) over brick work, RCC slab of size
1.60mX1.60m and 0.10m thick ,RCC beam of
0.25mx0.30m and 3.40m average length in
cement concrete (1:2:4) using 12mm size
crusher broken hard black granite chips and
required steel reinforcement including
centering and shuttering,watering,curing ,cost
of all materials,conveyance of all materials to
worksite , payment of royalty, all taxes etc.all
complete as per approved drawing , P.H.
specification and direction of Engineer-in-
1000 liters capacity PVC water storage tank
supplying all materials, labour, T&P and
cutting holes through existing brick work
including making good the damages in
cement mortar (1:4) for taking G.I. Pipes and
fittings/ P.V.C. pipes and fittings including
watering, curing, cost & conveyance of all
materials to worksite, payment of royality,
taxes etc. all complete as per direction of
Engineer-in-charge.
Supplying all materials , labour, T&P and
cutting holes in RCC floors and roofs upto
19cm thick for passing P.V.C pipes and G.I
fittings etc. , and repairing the holes after
392 24 insertion of pipe etc. with cement concrete Each 4.00 198.12 792.49
(1:2:4) including finishing complete so as to
make it leak-proof as per P.H. specification
and direction of Engineer-in-charge
Supplying all materials, labour, T&P and
cutting grooves in pucca floors and walls for
taking G.I./P.V.C. pipes and making good the
damages including watering , curing , cost &
conveyance of all materials to worksite,
payment of royality, taxes etc all complete as
per direction of the Engineer-in-charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
fitting and fixing U-PVC SWR soil waste
ventilating pipes and fittings of the following
outside diameter conforming to ISI No
13592/1992 to walls with nails, bobbins and
wooden plugs or laying in trenches including
jointing with supply of approved rubber
394 26 lubricant by non-heat application method/as 0 0.00 0.00 0.00
per manufacturer's specification, testing,
earthwork in excavation in all kinds of soil and
refilling of trenches , cost & conveyance of all
materials to worksite, payment of taxes etc.
all complete as per P.H specification and
direction of the Engineer-in-charge.
110mm U-PVC SWR Pipe (Ori
Plast/Finolex/Supreme Make Type-B)
110mm U-PVC ‘P’ Trap(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC door bend(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Plain bend(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC offset without ear(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Cowl(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC S/Jn door(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Plain tee(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC D/Jn door(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Door tee(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Socket(Ori
Plast/Finolex/Supreme Make)
Supplying all materials, labour, T&P and
fixing vitreous china water closet, squatting
pan (Indian type W.C pan/Orissa pattern
squatting pan) duly embedded in cement
concrete (1:5:10) using 4cm size hard granite
metal including fixing a pair of vitreous china
250mm x 130mm x30mm footrest, fixing
100mm dia HCI 'p' or 's' trap (with/without
406 38 50mm dia horn) for water colset squatting 0 0.00 0.00 0.00
pan including jointing the trap with pan in
cement mortar (1:1) cutting the floor and
mending good the damages , cost &
conveyance of all materials to worksite,
payment of royality , taxes etc. all complete
as per P.H specification and direction of the
Engineer-in-charge.
580mm size Orissa pan
(Hindware/Parryware/Neycer make)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour T&P and and
fixing 12.50 liters/10 liters capacity low level
flushing cistern with a pair of cast iron or M.S.
brackets complete with fittings such as
siphonic arrangements 15mm nominal size
brass/pvc ball valve with polythene float CP
brass handle,unions and couplings for
connection with inlet, outlet and overflow
pipes, 32mm dia CP long flush bend, 15mm
408 40 dia pvc inlet connection pipe including cutting 0 0.00 0.00 0.00
holes and making good the same and
connecting the flush bend with cistern and
closet and connceting the inlet pipe with
suupply main , cost & conveyance of all
materials to worksite, payment of taxes etc.
all complete as per P.H specification and
direction of the Engineer-in-charge
10 ltr. Capacity pvc L.L. cistern with 32mm.
409 41 Dia CP long flush bend ( Slimline-white- Each 5.00 1868.53 9,342.65
Parryware make )
Supplying all materials,labour,T&P and fixing
Flat back lipped wall (Mini stall urinal -
630mmx180mm) urinal of the following sizes
including connecting the urinal with 32mm.
dia pvc waste pipe 910mm. long by means of
white lead mixed with chopped hemp, fixing
32mm. dia CP dome waste, 15mm. dia CP
spreader including cutting holes in walls and
making good the damages with supply of
wooden plugs, screws and cement etc. all
complete as per specification and direction of
the Engineer in charge Half stall urinal
Supplying all materials, labour, T&P and
fixing the following vitreous china Wash Down
Water Closet(European type W.C. pan)with
integral 'p' or 's' trap to the floor with wooden
plug and chromium plated pedestal screws
including jointing the trap with soil pipe in
cement mortar (1:1) fixing plastic seat and
411 43 cover for wash down water closet with 0 0.00 0.00 0.00
chromium plated brass hinges and rubber
buffers including polishing , cost &
conveyance of all materials to worksite,
payment of royality, taxes etc. all complete
as per P.H specification and direction of the
Engineer-in-charge
European water closet with 'p' trap
plain(Hindware/Parryware/Neycer make)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour T&P and fixing
wash basins with hole for pillar taps with cast
iron or M.S.brackets painted white including
cutting holes in walls and making good the
damages with supply of wooden plugs,
screws and cement etc, fixing pedestal for
wash basin recessed at the back for the
reception of pipes and fittings, fixing PVC
waste pipe of 32mm nominal diameter for
wash basin including brass check nut
complete, fixing pillar taps capstan head
screw down high pressure lettered 'Hot' and
'Cold' with long screws, shanks and back nuts
of 15mm dia nominal bore, fixing 15mm dia
PVC inlet connection pipe and making
connection with pillar cocks and supply mains
for wash basin, fixing 32mm dia CP brass
waste, cost & conveyance of all materials to
worksite, payment of taxes etc. all complete
as perP.H specification and direction of the
Engineer-in-charge
550mmx400mm W.H.basin
(Hindware/Parryware/Neycer make)with
414 46 15mm dia C.P.pillar cock (Plaza make) with Each 5.00 4656.52 23,282.58
Supplying all materials, labour, T&P and
fixing standard sized CP towel rail complete
with CP brass brackets fixed to wooden plugs
with CP screws as per specification and
direction of the Engineer in charge
416 48 25mmx600mm long CP towel rail Each 1.00 832.96 832.96
Supplying all materials, labour, T&P and
fixing standard sized glass-shelf with CP
brass brackets and guard rail complete fixed
to wooden plugs with CP screws as per
specification and direction of Engineer in
600mmx125mm plate glass shelf with CP/NP
Supplying all materials, labour, T&P and
fixing mirror of superior glass mounted on
6mm.thick A.C. sheet or ply wood sheet and
420 52 fixed to wooden plugs with CP screws and 0 0.00 0.00 0.00
washers complete as per specification and
direction of Engineer in charge.
600mmx450mm size B.E mirror (swivelled
Supplying all materials, labour, T&P and
fixing CP soap holder complete with CP brass
422 54 brackets fixed to wooden plugs with CP 0 0.00 0.00 0.00
screws as per specification and direction of
the Engineer in charge
Supplying all materials labor T&P & Fitting &
fixing CP shower with rim with supply of red
lead and yarn nail complete as per direction
of Engineer in charge.
425 57 ½” x 5” CP Shower (Plaza Deluxe Make) Each 1.00 572.77 572.77
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials , labour, T&P and
cutting holes through existing brick or laterite
masonry wall for taking U-PVC pipes and
426 58 fittings including making good the damages Each 12.00 232.11 2,785.27
etc. all complete as per P.H. specification and
direction of Engineer-in-charge
Supplying all materials , labour, T&P and
cutting of RCC chajja for taking HCI or U-
PVC pipe and fittings including making good
the damages etc. all complete as per P.H.
specification and direction of Engineer-in-
Supplying all materials ,labour ,T&P and
constructing Inspection Chamber of inside
size 760mmx760mmx460mm with cement
concrete (1:3:6) using 40mm size crusher
broken hard black granite metal on bed , KB
brick work in cement mortar (1:6) in
foundation and plinth, moulding and shaping
the channel inside and benching with cement
concrete (1:2:4) using 12mm size crusher
broken hard black granite chips, 12mm thick
cement plaster (1:3) with cement punning to
inside, cement flush pointing (1:3) to outside,
R.C.C cover slab (1:2:4) using 12mm size
crusher broken hard black granite chips with
R.C.C man hole cover, earth work in
excavation in all kinds of soil and refilling the
cavity around the chamber including
watering,curing,cost of all materials,
conveyance of all materials to worksite,
payment of royalty,all taxes etc.all complete
as per approved drawing, P.H specification
and direction of Engineer-in-charge
Inside size 76cmx76cmx46cm with 18” dia
Supplying all materials ,labour ,T&P and
constructing gully trap chamber of inside size
250mmx250mm with 8cm thick RCC precast
cover slab in cement concrete (1:2:4) mix
using 12mm size crusher broken HG chips,
foundation concrete (1:4:8) using 40mm size
crusher broken HG metal on bed and around
trap, KB brick work in cement mortar (1:6) in
foundation and plinth and inside 12mm thick
cement plastering (1:3) finished with a
floating coat of neat cement including fixing
100mmx100mm size HCI gully trap,
150mmX150mm size CI grating etc.all
complete as per drawing, specification and
direction of Engineer-in-charge
Supplying all materials labour T&P filling sand
in lavatories well watered and rammed
including lead of materials to work site.21.70
Supplying all materials, labour, T&P and
providing cement concrete ( 1:4:8 ) with 4cm
size crusher broken hard granite metal
including watering, curing, cost of all
432 64 materials,conveyance of all materials to work Cum 2.17 5831.32 12,653.97
site with payment of royalty, all taxes etc all
complete as per P.W.D specification and
direction of Engineer-in-charge 21.70 * 0.10
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing cement concrete ( 1:2:4 ) with
12mm size crusher broken hard black granite
chips including watering, curing,cost of all
433 65 materials, conveyance of all materials to work Cum 2.17 7921.58 17,189.82
site with payment of royalty, all taxes etc all
complete as per P.W.D specification and
direction of Engineer-in-charge 21.70 * 0.10
Supplying all materials, labour, T&P and
providing and fixing ceramic tiles in floors,
treads or steps and landing on 25mm thick
bed of cement mortar (1:1) ( 1 cement : 1
sand ) jointed with neat cement slurry mixed
with pigment to match the shades of the tiles
including watering, curing,cost of all
materials, conveyance of all materials to work
site , payment of royalty, all taxes etc all
complete as per P.W.D specification and
direction of Engineer-in-charge ( ceramic
floor tiles of premium grade having thickness
7mm to 8mm conforming to IS 13755 of size
Kajaria/Somany/Johnson tile 60cmx60cm
special printed series to be pre-approved by
the Engineer-in-charge )
Kajaria/Somany/Johnson tile 60cmx60cm
Supplying all materials,labour,T&P and
providing 12mm thick cement plaster(1:4) on
brick work including watering,curing,cost of all
materials, conveyance of all materials to
worksite,payment of royalty,all taxes etc.all
complete as per PWD specification and
direction of the Engineer-in-charge.
Supplying all materials, labour, T&P and
providing and fixing porcelain glazed tiles in
dado skirting on 12mm thick cement plaster
(1:3) jointed with neat cement slurry mixed
with pigment to match the shades of the tiles
including watering, curing,cost of all
materials, conveyance of all materials to work
site , payment of royalty, all taxes etc all
complete as per P.W.D specification and
direction of Engineer-in-charge( ceramic wall
tiles of premium grade having thickness
6.5mm to 6.7mm conforming to IS 13753 of
size Kajaria/Somany/Johnson tile
60cmx30cm special plain / printed series to
be pre-approved by the Engineer-in-charge )
Kajaria/Somany/Johnson tile 60cmx30cm
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Factory made single leaf rigid FRP(alternately
called GRP) sanwhch composite door shutter
of 32mm thick laminated ith two GRP skins
with wood grain finish fabricated using UV-
stabilised Isothealica Gelcoat and one layer
of 450 gsm E-glass chopped starand mat
(CSM) impregnated with orthopthalic
palyester resin. The thikness of the skins
shall not be less that 1.50mm expanded
polyestyrone(EPS) stuctural foam panel of 29
mm thickness and a density of 20Kg/cu.mtr
shall be used as core material .Wooden
reinforcements made of seasoned sal wood
reinforements for fitting the metal fittings such
as tower bolts ,aldrops,handles etc. shall be
provided .A Strictira; adehsive compatible
with(EPS) foam shall be used for bending the
core material,the sal wood reiforcements and
the skins.The materials and process for
manufacturing the door shutters shall
conform to RC-TIFAC composites Design
centre's standars and specifications and the
door shutters tested in conformation to
IS:40250-1998.The finish of door shutter will
be plain colour white/Lvory/beige/Light
grey/Mahogany/Teak wood of any other
colour using high quality pigments .Three
heavy whight mild steel butt hinges typpe-
I(ISI-marked) size 100 mm are to be fitted on
one side of shutter. 7 x 2.13 x 0.76
Factory made FRP (alternately called GRP)
door frame of sixe75mmX100 mm fabricated
using E-Glass chopped strand Mat(CSM) U.V
stabilised inopthalic Gelcoat and impregnated
with inopthalic resin.The thickness of the
GRP sikns shall no be less that 2.00 mm
.The door frame consist of foru segments
which are provided with plug-in-socket
arrangement in-site in the ,ould .The
segments are plugged in and are joined
together by means of screw . The GRP frame
shall be provided with wooedn rainforcement
of six locations for high screw holding
capacity for fixing metallic hold fast and shall
be consolidated by filling with medium destity
foam/Plaster of paris with fibre
reinforcement,Six numbers of 260mm X
25mm X 5 mm size 'S' shaped M.S flat hold
fast shall be provided with the frame .The
material and process for manufacturing the
door frames shall conform to RV-TIFAC
composites Design centre's stanards and
specifications.The finish of door rrame will be
plain colour white/Lvory/Beige/Light grey
Golden brown Mahogany/Teak wood sand
stone/Champagne /Pastel blue or any other
colour using high quality pigments cimplete in
all respect as per specification and direction
of the Engineer in Charge. 5.02 x 7
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing fitting and fixing (Aqua guard) pure
chill 80 PSS UV of size 750 x 570 x 1350mm
hight with water storage capacity 80 liter's
along with 2 noa of faucets 1 for cold water
and 1 for normal water including a flow of 1.5
ltr per munite etc all complete as per
approved drawing , specification and direction
of the Engineer in charge
452 84 Aqua guard pure Chill 80 PSS UV Each 1.00 102635.22 1,02,635.22
Supplying all materials, labour, T&P and
laying in trenches (to level or slope)
unplasticized P.V.C. pipe conforming to IS
4985/2000 of the following out side dia for
class- 3 (0.60mpa ) including jointing with
supply of approved solvent cement by non-
heat application method/as per manufacture's
454 86 specification, provoding and laying in trench 0 0.00 0.00 0.00
cement concrete (1:4:8) with 40mm size hard
granite metal in the type C-1 standard
bedding surrounding or encasing including
concrete for bedding and curing etc all
complete as per P.H. specification and
direction of the Engineer in charge
Supplying all materials labor T&P and
constructing MH chamber of sizes earth work
in excavation in all kinds of soil CC(1:1:8)
with black granite chips size 46mm brick work
with K.B. brick having crossing strength not
less than 75 Kg /CM2 to 90 Kg/CM2s in
CM(1:6)12mm C.P(1:8) inside MH chamber
over benching with cement slush pointing
(1:3)outside the MH chamber providing
457 89 painting MS or CI step iron RCC(roof of slab 0 0.00 0.00 0.00
with CC(1:2:4)with black granite chips size
12mm bending binding tying the grills placing
of the reinforcement providing RCC color of
required size refilling the cavity around the
MH chamber with excavated earth including
channeling the bed of MH etc all complete as
per PH specification.
MH size 0.91m x 0.91 m with 0.45 m (18” dia
Supplying all materials labour T&P and
constructing 1.80m dia x 2.60 m deep soak
way pit with dry brick having crossing strength
not less than 75Kg/CM2 to 99Kg/CM2 in
CM(1:6) for the remaining 0.4572mm height
of wall at top CC(1:3)inside and outside
inside fill with dry brick khoa size 38mm ,CM
thick RCC perforated slab to a height of
1.9012m from bottom covered by means of
50mmthick RCC wall cover in pieces filled
with iron plugs including earth work in
excavation refilling of cavity around the pit
and painting the iron works complete as per
PHD design and specification including
carriage of all materials to site.
460 92 1 no 30 Users Septic tank 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Earth work in excavation of foundation in all
kinds of soil within 50m initial lead and 1.5m
initial lift including rough dressing & breaking
461 93 clods to maximum 5cm to 7cm and laying in 0 0.00 0.00 0.00
layers not exceeding 0.30m in depth and as
per direction of the Engineer-in-Charge.
Extra lifts of 1.50 mtr or part thereof over the
initial lift of 1.5 mtr in all kinds of
embankments and road works and ordinary
earthwork in general.
Supplying all materials, labour, T&P and
providing cement concrete (1:3:6) with 4cm
size hard granite metal including watering,
465 97 curing, conveyance of all materials to 0 0.00 0.00 0.00
worksite, payment of royalty, taxes etc all
complete as per specification and direction of
the Engineer in charge
Supplying all materials, labour, T&P and
providing cement concrete (1:2:4) with 12m
size hard broken granite chips including
watering, curing, conveyance of all materials
to worksite, payment of royalty, taxes etc all
complete as per specification and direction of
the Engineer in charge
Supplying all materials, labour, T&P and
providing cement concrete (1:1½:3) with
12mm size crusher broken hard black granite
chips for RCC works including hoisting,
laying, watering, curing,cost of all materials,
conveyance of all materials to worksite,
payment of royalty,all taxes etc. all complete
as per PWD specification and direction of the
Engineer in charge.
Supplying all materials, labour, T&P and
providing steel reinforcement of Fe-415 /Fe-
500 grade for RCC work including
cutting,bending,binding and tying the grills
and placing in position including cost of
binding wire 18 to 20 gauge,cost of steel,
conveyance of all materials to worksite,
payment of royalty,all taxes etc all complete
as per PWD specification and direction of the
Engineer-in-charge.
Supplying all materials, labour, T&P and
providing rigid & smooth centering and
shuttering for RCC works including false work
and dismantling them after casting including
conveyance of all materials to worksite,
payment of royalty, taxes etc. all complete as
per specification and direction of the
Engineer-in-charge
RCC floor, roof slab chhaja up to 4.430 m
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials.labour.T&P and
providing brick work in foundation and plinth
with KB bricks having curshing strength not
less than 75 kg/sqcm with dimensional
tolerance+ 8% in cement mortar ( 1:3 )
479 111 including watering,curing,cost of all 0 0.00 0.00 0.00
materials,conveyance of all materials to
worksite,payment of royalty,all taxes etc.all
complete as per PWD specification and
direction of the Engineer in charge.
Supplying all materials,labour,T&P and
providing 12mm thick cement plaster(1:3) on
brick work including watering,curing,cost of all
materials, conveyance of all materials to
worksite,payment of royalty,all taxes etc.all
complete as per PWD specification and
direction of the Engineer-in-charge.
Supplying all materials, labour, T&P and
providing cement punning including watering,
curing, conveyance of all materials to
worksite, payment of royalty, taxes etc all
complete as per specification and direction of
the Engineer in charge
Supplying all materials labour T&P and fitting
and fixing 12mm dia MS/CI step iron
490 122 including supply of necessary CC(1:2:4) for Each 5.00 324.26 1,621.32
fixing etc. complete as per PH specification.
Supplying all materials, labour T&P for
providing fitting & fixing 100mm x 100mm SW
Tee in wall including filling the recess with
cement concrete (1:2:4) with 12mm size HG
491 123 chips all complete including watering curing Each 2.00 466.10 932.20
conveyance of all materials to work site
payment of royalty all complete as per
specification and direction of Engineer in
Supplying all materials labor T&P filling sand
in foundation and plinth with well watered and
rammed etc all complete as per direction of
Engineer-in-charge.
Construction of 1nos production wells
including scientific source finding through
consolidated and unconsolidated rock with
down the hammer drilling rig or combination
rig with PVC pipe and installation of
submersible pump set with all acessories
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Labour for drilling a perfectly vertical bore
hole of specified dia for a specified depth
below ground level through consolidated and
unconsolidated rock with down the hole
hammer drilling rig or combination rig as
required to suit the site condition as per the
direction of the Engineer in charge including
use of own rig with its accessories, tools and
plant and consumables etc for lowering of
200mm/150mm dia G.I/P.V.C/M.S casing
pipes for housing fitted with socket and with
497 129 or without well screen as per the necessity for 0 0.00 0.00 0.00
soft, medium, hard and boulder formation
(G.I/ P.V.C/ M.S casing pipes if required to
prevent collapse of overburden is to be
provided by the contractor including lowering
and withdrawing after completion of the tube
well), 200mm dia to 400mm dia in
overburden portion including packing of
gravel supplied by the contractor for 400mm
498 130 Drilling of 200mm dia bore 0 0.00 0.00 0.00
501 133 Drilling of 150mm dia bore 0 0.00 0.00 0.00
Lowering the following size of G.I/P.V.C/M.S
housing pipes with or without slotted pipes as
per the necessity from ground level up to
45.00m depth and fitted and fixed up in
perfectly vertical position including cutting
and threading of pipes and slotted pipes and
supplying and fixing all jointing materials,
tools and plant etc all complete and keeping
the top of casing pipe threaded including
plugging tube wells to prevent entry of foreign
Lowering of 200mm dia P.V.C casing pipes
Supplying polyvinyl chloride pipes as per
ASTM-D-1785-89 having threads in
accordance with DIN 2999 part-1/DIN-42225
part-II specification length of pipe (laying
length) will be 3 mtrs. The pipes shall be
supplied with both external and threaded with
free socket. The pipe having external thread
at one end i.e female and or belled end. The
female end having internal thread is to be
507 139 belled in order to accept the male end while 0 0.00 0.00 0.00
jointing pipes with a bore threading shall be
provided with a greave at the roof of the male
thread accomodate flexible PVC/Rubber 'O'
ring to make the joint water tight colour of the
pipe shall be blue. The name of the
manufacture along with batch No class of
pipe shall be stranded legibly of each pipe
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing and providing sanitary sealing by
cement concrete grouting of annular space
around GI/PVC/MS housing pipe upto 5m
below ground level (as per drawing) to plug
the bore hole excluding cost of cement all
509 141 complete as per direction of the Engineer in Each 1.00 931.96 931.96
charge. Minimum one metre of casing pipe to
be inserted in the bore into the rock at the
bottom to ensure sanitary sealing (excluding
cost of cement which will be supplied directly
by the department)
Cleaning and developing the tube well with
supply of compressor worked till clear and
adequate discharge is obtained from the tube
well including supply and use of all necessary
equipment and labour as per direction of the
Engineer in charge
Supplying all materials, equipment, labour &
conducting reconnaissance survey,
integrated Hydrological and Geophysical
(Electrical Resistivity Method) survey &
selection of potential source for exploration of
Ground Water including selection and
recommendation of site for drilling wells in
selected locations in any part of Orissa under
the following Geological formation:
Rocky terrain with boulder formation for 300m
Supplying all materials, labour, T&P and
providing, fitting and fixing submersible pump
with squirrel cage induction type submersible
type submersible electric motor to run on 3
phase/1 phase line voltage ranging from 320
volt to 450 volt conforming to IS: 8034/89 with
following specifications with suitable control
panel, jointing with GI/PVC/HDPE pipes,
electrification, testing, commissioning, trial
running, conveyance of all materials to
worksite, payment of taxes etc all complete
as per specification and direction of the
Engineer in charge (Texmo/Crompton
Greaves/Kirloskar make)
1 H.P. Single phase/ three phase 3 stage
head renge of 20 to 35 mtr with discharge
capasity 145 to 110 L.P.M With outlet dia 25
mm (keeping 100% standby)
516 148 DOL Control panel Each 1.00 4490.49 4,490.49
517 149 40mm dia steel short piece Each 1.00 179.71 179.71
519 151 50mm size CI bracket Pair 1.00 107.73 107.73
521 153 20mm dia rigid UPVC pipes Mtr 30.00 8.14 244.26
522 154 Steel rope with cover Mtr 30.00 31.51 945.18
Labour charges for lowering including
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing and fixing to wall or ceiling and floor
HDPE pipes and pipe fittings conforming to
IS: 4984/2000 (10kgf/sqcm) of the following
nominal bore with clamps and jointing by
Fusion welding method including testing,
making good the wall, ceiling and floor all
complete as per specification and direction of
the Engineer in charge
32mm HDPE pipes (Finolex/Supreme make)
526 0 Sub-Total of Plumbing Works 0 0.00 0.00 12,12,904.43
527 0 Electrical Works 0 0.00 0.00 0.00
528 1 Sub-Head I (modular Wiring Items) 0 0.00 0.00 0.00
Point wiring in Recessed wirring to light
point/ fan point/ exhaust fan point/ call bell
point with 1.5 sq.mm FRLSH/LSZH PVC
insulated copper conductor of ISI marked, 20
mm dia PVC flexible non metallic conduit
FRLS type ISI marked, switch ISI marked ,
and ceiling rose ISI marked, of modular type
529 2 G.I box with metallic cover plate (both side) 0 0.00 0.00 0.00
falme retradant type) , of suitable size,
modular box with 1.5 sq. Mm FRLS PVC
insulated single core multistandard copper
conductor as earth wire including all
accessories and connection as per direction
Group control of point in Recessed wirring to
light point/ fan point/ exhaust fan point/ call
bell point with 1.5 sq.mm FRLSH/LSZH PVC
insulated copper conductor of ISI marked, 20
mm dia PVC flexible non metallic conduit
FRLS type ISI marked, with 6A modular
type(( falme retradant type)) switch ISI
marked, and ceiling rose ISI marked, of
modular type G.I box with metallic cover
plate (both side) falme retradant type), of
suitable size, modular box with 1.5 sq. Mm
FRLS PVC insulated single core
multistandard copper conductor as earth wire
533 6 including all accessories and connection as Nos 12.00 1234.28 14,811.36
per direction of Engineer -in -Charge.
CATAGORY AS FOLLOWS ,complete
suitable for Office.(Maximum 02 nos point in
one circuit).All the switches & sockets should
be warrantied for a replacement period of 10
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free after sales service within
warranty period for acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying ,fixing of 6A Plug on the same
board in existing switch board with complete
fitting by 01 no of 6A switch & socket
(modular type)( ( falme retradant type)) &
other required accessories of ISI marked as
approved as per direction of Engg. -in -
Charge. Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision) or equievalant
reputed make & model A catagory ISI marked
as approved, complete suitable for for
HOSTEL.(Maximum 02 nos point in one
circuit).All the switches & sockets should be
warrantied for a replacement period of 10
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within warranty
period for acceptance of materials.
Supplying,fixing of 6A Plug on the separate
board with complete fitting by 01 no of 6A
switch & socket(modular type)( ( falme
retradant type)) with suitable size modular
box & cover( falme retradant type) including
supplying of all required accessories of ISI
marked as approved as per direction of engg-
in-charge..Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision) or equievalant
make & model ISI marked as approved ,
complete suitable for Residence.(Maximum
02 nos point in one circuit).All the switches &
535 8 sockets should be warrantied for a period of Nos 14.00 604.16 8,458.24
10 years against manufacturing defects
against which ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free aftersales service within warranty period
for acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying,fixing of 1x16A Plug on the
separate board with complete fitting by 01 no
of 16A switch & socket(modular type)( falme
retradant type)) with suitable size modular
box & cover( falme retradant type) including
supplying of all required accessories of ISI
marked as approved as per direction of engg-
in-charge.. Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision)or equievalant reputed
make A catagory ISI marked as approved,
(For equipement power)All the switches &
sockets should be warrantied for a
replacement period of 10 years against
defects with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Receass wiring for circuit/submain wiring with
the following mentioned size PVC
FRLSH/LSZH insulated, copper conductor,
single core cable (Finolex/Anchor/Polycab/
HAVELLS/RR KEBLE) or equievalant reputed
make A catagory ISI marked as approved, in
recessed PVC conduit Heavy duty FRLS of
mentioned size (AKG/Anchor/Kinjal or
537 10 equievalant ISI marked as approved) as 0 0.00 0.00 0.00
required as per direction of Engg.-in-Charge.
Ncessary test report & Warrnaty certificate to
be submitted to the department for genuinity
of product & to avail free after sales service
within warranty
period for acceptance of materials
2 nos single core 1.5 sq. mm copper wire for
phase and neutral and 01 no of single core
1.5 sq. mm copper wire for earth continuty
conductor. In 20 mm dia non metallic heavy
duty flexible conduit (LDB to LSB/LIGHT
2 nos single core 2.5 sq. mm copper wire for
phase and neutral and 01 no of single core
1.5 sq. mm copper wire for earth continuty
conductor in 20 mm dia non metallic
539 12 heavy duty flexible conduit.(BDB to Mtr 211.00 174.64 36,849.04
LSB/LIGHT CKT/5A PLUG/INVERTER
POINT TO EACH QTR) (2X2.5+1X1.5)
4 nos single core 2.5 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
540541 13 conductor .in 25 mm dia non metallic Mtr 155.00 312.70 48,468.50
heavy duty flexible conduit(LDB to LSB/5A
SOCKET) (4X2.5+2X2.5)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
2 nos single core 4 sq. mm copper wire for
phase and neutral and 01 no of single core
1.5 sq. mm copper wire for earth continuty
conductor in 20 mm dia non metallic heavy
542 14 duty flexible conduit .(PDB to PSB/ GAYSER Mtr 25.00 194.70 4,867.50
POINT/AC POINT/ROOM LIGHT CONTROL
TO CORRIDOOR POINT/DG PANEL
ESSENTIAL LOAD) (2X4+1X1.5)
4 nos single core 4 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
conductor in 32 mm dia non metallic heavy
543 15 duty flexible conduit.(PDB to PSB/GAYSER. Mtr 25.00 292.64 7,316.00
POINT/AC POINT/DG PANEL ACCL TO
EACH QTR ESSENTIAL LOAD)
2 nos single core 6 sq. mm copper wire for
phase and neutral and 01 no of single core
2.5 sq. mm copper wire for earth continuty
544 16 conductor in 25 mm dia non metallic heavy Mtr 16.00 231.28 3,700.48
duty flexible conduit .(LFDB TO LBDB)
4 nos single core 6 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
545 17 conductor in 32 mm dia non metallic Mtr 15.00 346.92 5,203.80
heavy duty flexible conduit.(LFDB TO
LBDB/power unit/point) (4X6+2X2.5)
4 nos single core 10 sq. mm copper wire for
phase and neutral and 02 nos of single core
4 sq. mm copper wire for
546 18 earth continuty conductorin 32 mm dia non Mtr 15.00 496.78 7,451.70
metallic heavy duty flexible conduit .(LFDB
TO FLOOR PANEL TO TPN
Supplying and fixing 20 amps, 240 volts,
SPN, industrial type socket outlet, with 2 pole
and earth metal enclosed plug top along with
32 amps. C-series, SP MCB, in sheet steel
enclosure, on surface or in recess, with
chained metal cover for the socket outlet, and
complete with connections, testing and
commissioning etc. as required as per
direction of Engg.-in- Charge.. . Make-
Legrand/Schneider/Siemens/panasonic or
equievalant reputed make & model A
547 19 catagory ISI marked as approved,All the Nos 5.00 733.96 3,669.80
Components should be warrantied for a
replacement period of 5 years against
defects with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing following size/ modules,
GI box along with modular base & metallic
cover plate (both side) plate for modular
switches in recess etc as
required as per direction of
Engg.-in-Charge. MAKE-
Legrand/Siemens/Anchor/Panasonic/
Schneider or equievalant reputed make &
model A catagory ISI marked as approved
.All the Components should be warrantied
for a replacement period of 5 years
against defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free aftersales service within warranty period
for acceptance of materials.
Supplying and fixing of following sizes of
medium class PVC FRLS conduit ISI
marked along with accessories in
surface/recess including cutting the wall
and making good the same in case of
recessed conduit as required as per
direction of Engg.-in-Charge .MAKE
KINJAL/ AKG/Anchor or equievalant
reputed make A catagory ISI marked as
Supply and fixing modular type
indicator on the existing switch
box/cover . Equievalant higher model
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make &
model A catagory ISI marked as approved
as required as per direction of Engg.-in-
555 27 Charge.All the Components should be Nos 8.00 127.44 1,019.52
warrantied for a replacement period of 5
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within warranty
period for acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and installation of
AC starter Modular type,
Equievalant higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model
A catagory ISI marked as approved coil
voltage-415 Volt A.C. & O/L range of 9-
14A range on mod Box of suitable size
including modular coveras required as per
556 28 direction of Engg.-in-Charge .All the Nos 5.00 731.60 3,658.00
Components should be warrantied for a
replacement period of 5 years against
defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
Supply and fixing CALL bell (Ding dong
type) /Buzzer on the existing switch
box/cover. Equievalant higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model
A catagory ISI marked as approved .as
required as per direction of Engg.-in-
Charge.All the Components should be
warrantied for a replacement period of 5
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within warranty
period for acceptance of materials.
S/F of Bakelite angle holder/batten holder
(make-Anchor/Havells/Panasonic or
equievalant reputed make A catagory ISI
marked as approved )of ISI marked
conforming to IS-1258/1987 in place of
ceiling rose as per direction of Engg.-in-
Charge .All the Components should be
558 30 warrantied for a replacement period of 5 each 12.00 73.16 877.92
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within warranty
period for acceptance of materials.
Supplying,fixing of Blanking plate(modular
type)( falme retradant type)) in existing
switch box(anti bactorial & falme retradant
type) including supplying of all required
accessories of ISI marked as approved as
per direction of engg-in- charge. complete
suitable for IPH standard hospital.It should
be warrantied for a period of 10 years
559 31 against manufacturing defects against which Nos 12.00 49.56 594.72
ncessary test report & Warrnaty certificate to
be submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
560 32 Sub-Head II (Light fitting Fixture & Fan) 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying, installation, of exhaust fan of
heavy duty 300 mm sweep (Make-
Equievalant higher model with 5 star rated of
Havells/almonard/Anchor/Panasonic/Usha/Ha
lonix or equievalant reputed make & model A
catagory ISI marked as approved ) of
561 33 exhaust fan in the existing wall, including Nos 8.00 3693.40 29,547.20
fixing & conntection as required as per
direction of Engg.-in-Charge. Replacement
Warranty will be 5 years.
Supplying, installation, testing and
commssioning of 1400 mm sweep white/milky
colour ceiling fan Make-Equievalant higher
model with 5 star rated of
Havells/almonard/Anchor/Panasonic/Usha/Ha
lonix or equievalant reputed make & model A
catagory ISI marked as approved ) including
562 34 wiring the down rod of standard length (upto Nos 8.00 2616.06 20,928.48
30 cm) with 1.5 sq mm PVC insulated, copper
conductor, single core cable etc. as
required.(With fan Regulator) as required as
per direction of Engg.-in-
Charge.Replacement Warranty will be 5
Supplying, installation, testing and
commssioning of 1200 mm sweep
white/milky colour ceiling fan Make-
Equievalant higher model with 5 star rated
of Havells/almonard/Anchor/Panasonic/Usha
/Halonix or equievalant reputed make &
model A catagory ISI marked as approved )
563 35 including wiring the down rod of standard Nos 15.00 2514.58 37,718.70
length (upto 30 cm) with 1.5 sq mm PVC
insulated, copper conductor, single core
cable etc. as required as per direction of
Engg.-in- Charge,Replacement Warranty will
be 5 years.. .(With fan Regulator)
Supplying and fixing of Energy efficient
surface mounted square shape 18 W LED
luminaire of dimension of 225x 225 x 35 mm
consists of white powder coated , die-cast
Alluminium housing with high quality frosted
diffuser for glare-free uniform lighting
distribution with wattage not more than 20
watt and lumen output of 1500 lumens, , CRI
not less than 80,CCT of 6000 degree K,THD
less than 10%, with electronic driver, internal
surge protection of 2.5 KV , L70 B50: 30000
hrs (2 yrs warranty) and all other accessories
suitable for operation on 220 V to 240 V
supply as required as per direction of
Engg.-in-Charge. ( Make :
(Make: wipro LD80-171-60-XX-SM
or similar model of LT/Trilux
/Philips/Panasonic/HALONIX or equievalant
reputed make & model A catagory ISI marked
as approved).The luminaire should be
Replacement Warranty will be 5 years
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
SITC of energy efficient LED tube light fittings
with decorative alluminium batten and LED
tube light having power rating not more than
20 watt and lumen output not less than
2200 lumen complete with electronic
driver and all other accessories with
diffuser having 5 years warranty i/c
connection etc as required as per direction
of Engg.-in-Charge. ( (Make: wipro LL20-
221 --or similar model of LT/Trilux
/Philips/Panasonic/HALONIX or
equievalantreputed make & model A
catagory ISI marked as approved.). The
luminaire should be Replacement Warranty
will be 5 years .
SITC of Sleek LED 10-12 watt mirror
light fitting with extruded polycarbonate
housing,High optically efficient
diffuser,above wash basin complete with all
accessoriesetc. directly on wall, including
connection with 1.5 sq. mm FRLS PVC
insulated, copper conductor, single core
cable and earthing etc. as required as per
566 38 direction of Engg.-in-Charge. Nos 6.00 868.48 5,210.88
( Make : WIPRO Model No:LL20-111-XXX-
60-NE or similar model of
PHILIPS/Panasonic/HALONIX or
equievalant reputed make & model A
catagory ISI marked as approved. )The
luminaire should be Replacement Warranty
will be 5 years
Supplying and fixing of Energy efficient
recess mounted LED luminaire with white
powder coated ,pressure die-cast Al housing
,with high transmititivity,non-yellowing PMMA
diffuser, with wattage not more than 20 watt
and lumen output not less than 2600 Lumen (
120 lumens/watt ) of size240 x240 x 40 mm ,
,CRI not less than 80,CCT of 5700-6500
degree K,THD less than 10%, with Non
integrated isolated driver (protects the output
/secondary side from any disturbance on the
input / primary side ensuring safe operation),
all other accessories , life : 50,000 burning
hours (5 years warranty) , Internal surge
protection of 3 KV suitable for operation on
230 V, 50 Hz supply as required as per
direction of Engg.-in- Charge. (Make: wipro
LDB1-171-XXX-60-SM or similar model of
LT/Trilux /Philips/Panasonic/HALONIX or
equievalant reputed make & model A
catagory ISI marked as approved.) The
luminaire should be Replacement Warranty
will be 5 years.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying, installation, testing and
commssioning of 400 mm sweep wall fan
Make-Equievalant higher model with 3 star
Havells/almonard/Anchor/Panasonic/Usha/Ha
lonix or equievalant reputed make & model A
catagory ISI marked as approved ) including
wiring with 1.5 sq mm PVC insulated, copper
conductor, single core cable
Supplying and fixing extra conduit down rod
of 20 cm length G.I. pipe 15 mm dia, heavy
gauge including painting etc. as requiredas
required as per direction of Engg.-in-Charge .
569 41 (Note : More than 5 cm length shall be Nos 25.00 38.94 973.50
rounded to the nearest 10 cm and 5 cm or
less shall be ignored)of ISI mark as
BDBS,DB,AC DB,FLOOR PANELS,MCBS
Supplying and fixing of following
mentioned way, three pole/single pole
and neutral, sheet steel,double door MCB
distribution board, 415 volts/240 volts shall be
as per IEC 61439-3,integrated door earthing
system offering additional safety to the
user,High quality polyurethane Gasket,the
box and cover shall be fabricated to
withstand IK09,the DB should be properly
pre-treated with 7 tank process and duly
powder coated, phosphatized with powder
coated finish, on surface/recess, complete
with terminal blocks,with suitable size FR
PVC insulated copper conducter up to
terminal blocks, tinned copper busbar, neutral
busbar, earth bar, din bar. Make-LEGRAND-
Ekinox3 DB/ Siemens-Betaguard/
4 Way(8+12) Way TPN MCB DD DB
Horizontal Type as per IEC 61439-3 suitable
for Flush mounting and Surface mounting
with 100A Copper Bus Bar for each phase,
with neutral Bus bar, Earth Bar & Cable ties
for cable management, prefitted masking
sheet, IP43-IK09 with metal door(FOR
LIGHT,POWER INDOOR,3-PH,POWER
LOAD) Warranty on DB is 2 years.
Supply and fixing of 12 way DD single pole
and neutral sheet steel MCB distribution
board 250V on surface/recess complete with
tinned copper bus bar, neutral bus bar,
earth bar, din bar, detachable gland plate,
interconnections, phosphatized and powder
573 45 painted including earthing etc. as required Nos 2.00 2254.98 4,509.96
(but with out MCB/ RCCB/ Isolator) (ALL
LIGHT WITH CORRIDOOR/COMMON
AREA,EM LIGHT,UPS LOAD, EM LOAD
LIGHT LOAD,POWER LOAD )
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
2+4 way MCB Enclosure DB (GLAZED
574 46 door)(only each EM. CONNECTION UPS Nos 1.00 1932.84 1,932.84
Supplying and fixing 20 amps rating, 240
volts, C series, Double poles MCB of
Make-LEGRAND-Ekinox3 DB/ Siemens-
Betaguard/ Schneider- Acti 9/L&T
(Equievalant model)/Panasonic(Equivalant
model) /ABB(Equivalant model) or
equievalant reputed make & model A
catagory ISI marked as approved in the
existing MCB DB complete with
connections as per direction of Engg.-in-
Charge. The MCB should be Replacement
Warranty will be 5 years .MCB should have
the fault indication system in different colour
for ON, OFF & TRIP condition or Mid trip
position for Trip conditions for
easier identification of fault.Warranty on MCB
Supplying and fixing 6 amps to 32 amps
rating, 240 volts, C series, single poles
MCB of Make-LEGRAND-Ekinox3 DB/
Siemens-Betaguard/ Schneider- Acti 9/L&T
(Equievalant model)/Panasonic(Equivalant
model) /ABB(Equivalant model) or
576 48 equievalant reputed make & model A Nos 36.00 158.12 5,692.32
catagory ISI marked as approved. the
existing MCB DB complete with connections
as per direction of Engg.-in-Charge. The
MCB should be Replacement Warranty will
be 5 years.MCB should
Supplying and fixing 25Amps DP
240 volts, RCCB,300mA Make-
Equievalant higher model of
Legrand/Snheider/Siemens / L&T/Panasonic
/ABBor equievalant reputed make & model A
577 49 catagory ISI marked as approved in the Nos 2.00 1994.20 3,988.40
existing MCB DB in the existing MCB DB
complete with connections as per direction of
Engg.-in-Charge. The RCCB should be
Replacement Warranty will be 5 years
Supplying and fixing 40Amps DP
240 volts, RCCB,300mA Make-
Equievalant higher model of
Legrand/Snheider/Siemens / L&T/Panasonic
/ABB or equievalant reputed make & model
A catagory ISI marked as approved in the
existing MCB DB in the existing MCB DB
complete with connections as per direction
of Engg.-in- Charge. The RCCB should be
Replacement Warranty will be 5 years
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing 63Amps
TPN 415 volts, RCCB,300mA
Make-Equievalant higher model of
Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant
reputed make & model A catagory ISI
579 51 marked as approved in the existing MCB Nos 2.00 3121.10 6,242.20
DB in the existing MCB DB complete
with connections as per direction of Engg.-
in- Charge.(for power BDB & AC ODU, 8 way
TPN BDB IC).The RCCB should be
Replacement Warranty will be 5 years
580 52 (Earthing) INSTALLATION 0 0.00 0.00 0.00
S/IT/C of materials and installation of pipe
earth electrode made out of 50mm dia class
B G.I. pipe of 3.0 metre long with
581 53 arrangements for fitting/ termination of G.I. Nos 3.00 2987.76 8,963.28
flat / wire with G. I. nut bolts & washers
Providing and fixing 4 mm dia copper wire on
surface or in recess for loop earthing as
required.as per direction of Engg.-in- Charge.
Providing and fixing 25mm x 5 mm copper
strip on surface or in recess for connections
etc. as required as per direction of Engg.-in-
CABLING AND END TERMINATION MAIN
Supplying of one number PVC insulated
armoured and PVC sheathed XLPE property
AL. conductor power cable of 1.1 KV grade
POLYCAB/HAVELLS/Finolex or equievalant
reputed make ISI marked as approved of
following size cables as per direction of
585 57 Engg.-in-Charge. Ncessary test report & 0 0.00 0.00 0.00
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free after sales service within warranty period
for acceptance of materials
4core x 16 sq mm (MDB TO FDBL/FDBU
4 core x 4 sq mm (for small power/LIGHT TO
588 60 3.5core x 35 sq mm (To power MDB) Mtr 73.00 257.72 18,813.84
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
exceeding 25 SQ. MM direct in ground in the
trench in one horizental formation including
excavation ,sand coushing protection
covering and refilling the trench etc as
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
exceeding 25 SQ. MM direct in ground in the
EXISTING PIPE etc as required as per
direction of Engg.-in -charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
25 SQ. MM but not exceeding 400 SQ. MM
direct in ground in the EXISTING PIPE etc as
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
593 65 exceeding 25 SQ. MM in open duct etc as Mtr 8.00 42.48 339.84
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
25 SQ. MM in open duct 400 SQ. MM direct
in ground in the EXISTING PIPE etc as
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated
/XLPE power cable of 1.1 kv grade size
not exceeding 25 SQ. MM in surface
with shaddle and screw etc as required as
per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
exceeding 120 SQ. MM From 25 SQ. MM in
surface with shaddle and screw etc as
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
exceeding 400 SQ. MM From 120 SQ. MM in
surface with shaddle and screw etc as
required as per direction of Engg.-in -charge.
Supplying and making end termination with
brass compression gland and aluminium lugs
598 70 for following mentioned size cable.as per 0 0.00 0.00 0.00
direction of Engg.-in-Charge.
Providing,fixing and laying of fallowing dia
601 73 G.I. pipe (medium class) in ground complete 0 0.00 0.00 0.00
with G.I fitting incl. trenching(75
Providing,fixing and laying of fallowing dia
HDPE pipe (medium class) in ground
603 75 complete with fitting incl. trenching(75 mm 0 0.00 0.00 0.00
depth)and refilling as per direction of Engg.-in-
S/I/T&Commissioning of LT indoor floor
mounted cubical type electrical main panel
(for both light and power circuit) made out by
2mm CRCA steel sheet duly derusted &
pented by simens gray powder cote paint is
designed as G.A drawing as per direction of
Engg.-in-Charge. Warrentee period of
replacement of panel & accessories must be
5 years & compelete
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
In commer Main- 01 number of 125(80-
125) Amps 4P MCCB with Rom & sprader
link,25 Ka & 01 nos of 63A 4P O/L
changeover switch for DG & Servo. . (make-
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked)(Icu=100%Ics)with shunt trip.with
axulary for BMS
Busbar- 04 numbers of 200Amps
Electrolytic copper busbar duly sleeved by
609 81 color coaded PVC sleeve & supported by 0 0.00 0.00 0.00
suitable size DMC insulator.
Busbar DG - 04 numbers of 60 Amps
Electrolytic copper busbar duly sleeved by
color coaded PVC sleeve & supported by
suitable size DMC insulator.
Out going- (i) 63A 4P MCB 2 NOS FOR
611 83 POWER BDB GF,1f(Legrand/Schneider 0 0.00 0.00 0.00
Out going- (ii) 02 nos 32A 4P MCB LIGHT
BDB AC IDU BDB/LIGHT
BDB,LIFT,WATER,solar,ups(Legrand/Schnei
Out going- (iii) 01 no 32A 2P MCB LIGHT
BDB AC IDU BDB/LIGHT
BDB,LIFT,WATER,solar,ups(Legrand/Schnei
Instrument- (i)3 numbers phase indicating
614 86 lamp with toggle switch & HRC fuse. 0 0.00 0.00 0.00
(ii) 01 set of digital type multifunction meter
voltage,current,frequency,PF,THD indication
HOT DIPP GALVANIZED(GC) AS PER EN-
ISO-1461 , CARBON STEEL WIRE MESH
CABLE TRAYS with internal
dimensions of size 54mm(H) x 200mm(W),
of Legrand - Cablofil make or equievalant
reputed make & model A catogory, ISI
marked as approved .The Load bearing
capacity of the Cable Trays should be
minimum of 104.8Kg/meter at the span of
1.5Meter as per UL specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee
HOT DIPP GALVANIZED(GC) AS PER EN-
ISO-1461 , FLOOR RACE WAY WITH
JUNCTION with internal
dimensions of size 54mm(H) x 200mm(W),
of Legrand - Cablofil make or equievalant
reputed make ISI marked as approved .The
Load bearing capacity of the Cable Trays
617 89 should be minimum of 104.8Kg/meter at the mtrs 4.00 1295.64 5,182.56
span of 1.5Meter as per UL
specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required.
618 0 Sub-Total of Electrical Works 0 0.00 0.00 6,90,261.31
619 0 Firefighting Works 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
620 1 EXTINGUISHER SYSTEM 0 0.00 0.00 0.00
Portable Fire Extinguisher System
Supplying, installation, testing and
commissioning of CO2 type Fire
Extinguisher 4.5 kg capacity confirming to
IS: 2878 made from ISI marked
seamless cylinder confirming to IS:
621 2 7285, fitted with ISI marked controlled Nos 3.00 12302.68 36,908.04
valve confirming to IS: 3224, high
pressure 1mtr discharge hose & horn
complete with initial gas charged with
carrying handle & wall mounting bracket
as per direction of Engineer-in- charge.
Providing and installing in position the
following type of sign boards made out of
3mm thick "Opaque" PVC foam board
622 3 with computer cut, PVC non- reflective 0 0.00 0.00 0.00
self adhesive vinyle painted foam board,
complete with mirror fasteners.
Providing and fixing the signages "Fire Exit,
Fire Exit Arrow Down,Fire Exit Arrow
Left,Fire Exit Arrow Right" of 1.5in height
623 4 letters in white with green back ground.The Nos 5.00 1080.88 5,404.40
size of the board shall be 25cm x 15 cm and
shall be fixed at the height of 2 mts
624 0 Sub-Total of Firefighting Works 0 0.00 0.00 42,312.44
625 Grand Total 99,80,566.44
625 Grand Total 99,80,566.44
Abstract Estimate for Package No. BOL-001-NHM : Construction of DAY CARE PHC At
DERIGAON,PADAMAPUR,RAYAGADA,ODISHA
*Rates including taxes
Head Description of Item Unit Qnty. Rate Amount
Earthwork in excavation in hard soil for site
leveling, foundation, pits, trenches and other
civil works upto and including 1.5metre lift
and stacking the soil upto a lead of 100 metre
2 1 and including dewatering, removing slush, 0 0.00 0.00 0.00
shoring and strutting (as required), complete
as per specification and as directed by the
Engineer-In-Charge.
Filling in foundation trenches and plinth, with
excavated earth including laying the earth in
layers not exceeding 23.5 cm thick ramming
4 3 & watering with all leads & lifts including cost Cum 190.92 135.58 25,885.32
of all labour,T&P completed as directed by
the Engineer-in-charge.
Supplying and filling sand in foundation and
over areas including watering, ramming,
consolidating and dressing, labours, tools,
taxes etc. all complete as per the
specification and direction of Engineer-In-
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Diluting and injecting chemical emulsion (to
be supplied free of cost at site of work) for
PRE CONSTRUCTIONAL Anti-termite
treatment and creating a continuous chemical
barrier under and all-round the column pits,
wall trenches, basement excavation, top
perimeter of building, expansion joints, over
the top surface of consolidated earth on
which apron is to be laid, surroundings of
pipes and conduits etc. complete as per
specifications (plinth area of the building at
ground floor only shall be measured for
Providing and laying plain cement concrete
1:3:6 (1 cement : 3 sand : 6 stone agregate
40mm nominal size) as levelling course in
floor and plinth including tempering, curring,
shuttering etc. complete all depth and height.
Providing and laying plain cement concrete
1:2:4 (1 cement: 2 sand: 4 stone aggregate
12mm nominal size) as levelling course in
8 7 foundation and plinth etc. including 0 0.00 0.00 0.00
tempering, curring, shuttering etc.complete all
depth and height.
First class Fly ash Brick masonry using
bricks of size 25 cm. x 12 cm. x 8 cm. having
crushing strength not less than 75 kg. Per.
Sqr. Cm. in cement mortar of mix( 1:6) with
ordinary Portland slag cement(PSC) and
screened & washed sand for mortar after
immersing the bricks for 6 (Six) hours in
water before use in Foundation & Plinth
including splays cutting, circular moulding,
corbelling, chamfering and similar such type
of works, watering and curing etc. including
cost, conveyance, loading, unloading,
royalties and taxes of all materials, cost of all
labour, scaffolding, sundries, T&P required
for the works etc. complete in all respect as
directed by the Engineer-in-Charge.
Fly Ash. brick masonry of size 25 cm. x 12
cm. x 8 cm. having crushing strength not less
than 75 kg. Per Sqr. Cm. in cement mortar of
mix (1:6) with approved grade cement and
screened & washed sand for mortar after
immersing the bricks for 6 (Six) hours in
water before use in Superstructure including
splays cutting, circular moulding, corbelling,
11 10 chamfering and similar such type of works, 0 0.00 0.00 0.00
watering and curing etc. including cost,
conveyance, loading, unloading, royalties and
taxes of all materials, cost of all labour,
scaffolding, sundries, T&P required for the
works etc. complete in all respect as directed
by the Engineer-in-charge
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Half brick work with Fly Ash brick masonry in
cement mortar (1:4) in super structure
having a crushing strength of not less than 75
kg./sqcm with dimensional tolerance ± 2%
including splays cutting circular moulding
chamfering and corbelling and similar such
type of works with all necessary projections
watering and curing after immersing the
bricks in water at least for six hours before
use including cost, conveyance, royalties and
taxes of all materials with all labour,labour
cess and T & P required for the work
complete in all respect as per direction of
Engineer-in-Charge.
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-20 grade
as per approved designs and drawings
having a minimum compressive strength (in
work test) 200 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test
conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened and
washed sharp sand for mortar of approved
quality from approved quarry, washed and
cleaned ( 20mm. size chips not to exceeds 25
% ) to be mixed in concrete mixture with
Portland slag cement (PSC) including
hoisting, lowering, laying and compaction
concrete by using vibrators, watering and
curing for 28 days, centering and shuttering
then after dismantling and removing debris
from the work site and finishing the exposed
surface smooth providing grooves or beads
wherever necessary including cost,
conveyance, loading, unloading, royalties and
taxes of all materials and cost of all labours,
sundries, T & P required of the work etc.
complete in all respect as directed by the
Engineer-in-Charge. But excluding cost and
conveyance of M.S. rods or Tor steel and
binding wires and labour charges for
straightening, cutting, bending etc. of M.S.
rods or tor steel tying the grills and placing in
proper position.
19 18 b) Column up to plinth Cum 5.85 16200.46 94,773.18
21 20 f) Column above plinth Cum 11.29 16200.46 1,82,964.89
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Cutting, straightening coiled or bent up M.S.
Rod or tor steel of SAIL/ TATA / RINL
(VIZAG) make including bending, binding,
welding and joining if necessary and tying the
grills and placing in position as required for
R.C.C. Work and for providing fan hooks as
required, hoisting, lowering, laying including
cost, conveyances, taxes of M.S. Rod or tor
steel and binding wires of 18 to 20 gauge and
labour required for the work for bending,
binding and tying the grills in all floors (Linear
measurement will be taken and quantity will
be calculated basing on the standard weight
of B.I.S. for M.S. Rods or tor steel only.
Wastage if any, including weight of binding
wire will not be considered for measurement)
etc. complete as per specification & direction
of Engineer-in-charge.
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:6 (1
34 33 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
16mm cement plaster to inside of brick
surfaces with cement mortar of mix 1:6 (1
37 36 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
6 mm cement plaster on RCC surfaces at
ceiling/slab soffit and other locations with
cement mortar of mix 1:4 (1 cement : 4
coarse sand) including necessary scaffolding,
curing etc. all complete at all floors and all
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.40 sqm. (20mm thick) of
approved make in floors laid on 20 mm thick
cement mortar (1:4) (1 cement : 4
43 42 course sand) and filling joints with slurry 0 0.00 0.00 0.00
including cost of all materials, labour T&P etc.
required for the work all complete incl.
rubbing as per direction of the Engineer-in-
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.10 Sqm & up to 0.4 sqm
(10mm. thick) of approved make in dadoes
laid on 12 mm thick cement mortar (1:3)
(1 cement : 3 course sand) and filling joints
with slurry including cost of all materials,
labour T&P etc. required for the work all
complete incl. rubbing as per direction of the
Engineer-in-charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting & fixing of 8-10 mm thick &
size of 600x600 mm vertified floor tile of
matt finish with veilcraft (VC/FT ) shield(
Scratch free/stain free) with water absorption
limit between 0.08% to 3% and conforming
to IS : 15622:2006 (Group B Ib). laid on 20
mm thick cement mortar (1:4) (1 cement : 4
course sand) and filling joints with white
47 46 cement of approved quality including cost of 0 0.00 0.00 0.00
all materials, labour T&P etc. required for the
work all complete as per direction of the
Engineer-in-charge (for New Work only )
Supplying, fitting & fixing of 8-10 mm thick
and size of 600x600 mm vertified wall tile of
in dadoes, skirting and risers of steps of laid
on 12 mm thick cement mortar (1:3) (1
cement : 3 course sand) jointed with slurry
mixed with pigment to match the shades of
49 48 the tiles etc. complete including cost of all 0 0.00 0.00 0.00
materials, labour T&P etc. required for the
work all complete as per direction of the
Engineer-in-charge.
Providing and fixing seasoned sal wood work
in frames at any locations including doors,
windows,cupboard, clerestory and other
frames fixing in position including cost of
hinges, M.S. flat (30mm x 6mm) hold fasts
lugs or dash fasteners of required dia and
length as per drawing / specification, at all
floors and all heights.
Factory made 30mm/32mm flush door shutter
(Laminates both side of frame) with all labour,
iron fittings, and wooden hinged cleats etc
fitted and fixed complete in all respect.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing & fixing of Factory fabricated
WINPLUS® Aluminium Door Systems - For
sliding windows, made from 6063 alloy and T-
6 tempered aluminium profile, in approved
shade of hybrid /purepolyster surface coating
(50-60micron Powder Coat), mechanically
mitred & jointed with casted / aluminium
extruded corner cleats along with Sliding
window Flush Lock, Bearing Rollers ,
Siliconised Weather strip and 5mm ET 125
toughened glassas infill shall be fitted into
Shutter using siliconised microwave treated
55 54 EPDM gaskets excluding taxes of all 0 0.00 0.00 0.00
materials and cost of all labours required for
the work etc. complete in all respect as
desired by the Engineer in charge. Note -
conveyance, T&P and scaffolding are not
included herein.
Providing and fixing factory made 2 track 2
panel KOMMERLING uPVC white colour
sliding window comprising of uPVC multi-
chambered frame having section Frame
58mm x 49mm, Window sash: 37mm x
61mm, made out of lead free green profiles
with corners fusion welded, fully reinforced
with Galvanized steel 1.5/2.0 mm. The
windows profile should fulfill the requirements
of Viny 2010. The physical properties of the
profiles like Vicat softening temperature,
density, tensile strength, hardness,
weatherability, impact strength and Modulus
of Elasticity should be tested in accordance
with ASTM/DIN-ISO standards and the
thermal conductivity as per IS standards. The
window comprising of uPVC extruded glazing
beads of appropriate dimension, EPDM
gasket, G.I fasteners 100 x 8 mm size for
fixing frame to finished wall, plastic packers,
plastic caps and necessary stainless steel
screws etc. After fixing frame the gap
between frame and adjacent finished wall
shall be filled with weather proof silicon
sealant over backer rod of required size. The
sash will be fitted with 5mm clear glass ( float
).complete in all respect as per specification
and direction of the Engineer in Charge. etc.
Supplying and Fixing of M.S. Grills,
M.S.Doors, M.S. Gate etc including
cost,conveyance of all materials,priming,and
60 59 labour for fitting fixing etc.complete as per the 0 0.00 0.00 0.00
instruction of Engineer-in-Charge
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Priming one coat with wall cement primer
(water bound) to make an even finished
surface in all floors and heights to wall
surface of approved make and shade
including sand papering, applying putty
63 62 wherever necessary & cost of scaffolding, 0 0.00 0.00 0.00
staging charges with cost, conveyance, taxes
of all materials, cost of all labour,labour cess
T&P etc. complete as per the direction of the
Engineer-in-charge.
Painting two coats with approved anti-fungal
weather seal paints (ISI) of approved colour,
shade on wall surface over a coat of wall
primer(ISI) water bound including sand
papering, polishing the surface, cost,
conveyances of all materials and cost of all
labour,labour cess with T&P etc, complete as
per specification & direction of Engineer-in-
Finishing plastered surfaces of walls with
cement based wall putty (Water based) of
approved make and finishing the surface
smooth and even by sand papering to receive
painting in walls, at all heights with staging
69 68 wherever necessary with cost, conveyance, 0 0.00 0.00 0.00
taxes of all materials, cost of all
labour,labourcess, all T&P etc. required for
the work complete in all respect as per the
direction of the Engineer-in-charge.
Painting two coats with approved plastic
emulsion paint over a coat of wall primer of
make Dulux / Berger / Asian to inside surface
of walls finished with Acrylic Wall putty (water
based) of make (Birla / JK) and finished
smooth & even surface to receive painting
using roller to the final coat including cost of
72 71 scaffolding staging charges with cost, 0 0.00 0.00 0.00
conveyances, taxes of all materials, cost of
labour, T&P required for the work etc.
complete for all floors as per specification &
direction of the Engineer-in-charge.
Note :- Sample of Paint & Primer shall be
approved before procurement and use.
Painting two coats with approved Enamel
75 74 Paint on wood work over a coat of Wood 0 0.00 0.00 0.00
Primer in Ground Floor
Painting two coats with approved Enamel
Paint on Steel work in Ground Floor
79 78 Terrace floor Sqm 4.01 186.68 748.57
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting and fixing of Stainless steel
of 304 grade in hand ralling using 50mm dia
of 2mm thick circular pipe with Balustrade of
size 32mm X 32mm X 2mm @ 0.90mtr. C/C
and stainless square pipe bracing of size
80 79 32mm X 32mm X 2mm in 3 rows in stair case 0 0.00 0.00 0.00
as per approved design and specification,
buffing, polishing etc with cost, conveyance,
taxes, all materials, labour, T&P etc. required
for the complete in all respect.
2.5 cm thick grading concrete (1:2:2) on roof
slab with 6.7mm & down grades size hard
82 81 granite crusher broken chips on new work in 0 0.00 0.00 0.00
367 366 Sub-Total of Civil Works 0 0.00 0.00 79,18,273.77
368 0 Plumbing Works 0 0.00 0.00 0.00
Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC) pipes conforming to
IS:15778, having thermal stability for hot &
cold water supply, including all CPVC plain &
brass threaded fittings including fixing the
pipe with clamps at 1.00 m spacing. This
includes jointing of pipes & fittings with one
step CPVC solvent cement and testing of
joints complete as per direction of Engineer-
370 2 20mm dia PVC ASTM pipe (sch-80) Mtrs. 30.00 291.81 8,754.42
371 3 25mm dia PVC ASTM pipe (sch-80) Mtrs. 40.00 396.01 15,840.32
Supplying all materials, labour, T&P and
providing and fixing to wall or ceiling and floor
GI/PVC pipes, class-IV (10 k.g. F/cm) on
firming I.S.4985 of the following nominal bore,
372 4 tube fittings and clamps including making 0 0.00 0.00 0.00
good the wall, ceiling and floor, testing all
complete as per specification and direction of
the Engineer in charge.
373 5 32mm dia PVC ASTM pipe (sch-80) Mtrs. 45.00 294.76 13,264.38
374 6 40mm dia PVC ASTM pipe (sch-80) Mtrs. 30.00 387.39 11,621.82
Supplying all materials, labour T&P and fitting
and fixing brass/CP fittings of the following
nominal bore with supply of all joiniting
materials including cost & conveyance of all
materials to worksite, payment of taxes etc.
all complete as per P.H specification and
direction of the Engineer-in-charge.
15mm dia CP angle stop cock (Con-CHR-
053KN Jaquar make)
15mm dia CP two in one bib cock (Con-CHR-
041KN Jaquar make)
15 mm dia CP S.B. Bib cock(CON-CHR-
15mm dia CP Long Body Bib cock (Con-CHR-
107KN Jaquar make)
20mm dia CP consealed stop cock(Con-CHR-
083KN Jaquar make)
25mm dia brass full way valve (Shakti make)
32mm dia brass full way valve (Shakti make)
40mm dia brass full way valve (Shakti make)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
15mm dia CP Health faucet (Con-ALD-MCH-
573 Jaquar make)
385 17 15mm CP Extension piece Each 20.00 69.97 1,399.48
387 19 15mm size C.P. flange Each 20.00 47.55 951.08
388 20 25mm size brass ball cock with ball Each 2.00 1092.80 2,185.60
Supplying all materials , labour, T&P and
fixing rotational moulded polyethylene
cylindrical vertical water storage tanks
conforming to IS:12701/1996 including
cutting holes through the tank and fixing mild
steel tubes and fittings and providing extra
sockets and jam nuts, fixing ball valve etc.
including hoisting upto a height of 5 metres
above ground level and placing the tank to
the required position and providing 5.40 mtr.
lengthx0.25 mtr width KB brickwork in
cement mortar (1:6) of 0.46m height in
staging and 0.13mtr thick circular protection
wall of 0.46mtr height to support the
389 21 tank,12mm thick cement plaster in cement 0 0.00 0.00 0.00
mortar (1:6) over brick work, RCC slab of size
1.60mX1.60m and 0.10m thick ,RCC beam of
0.25mx0.30m and 3.40m average length in
cement concrete (1:2:4) using 12mm size
crusher broken hard black granite chips and
required steel reinforcement including
centering and shuttering,watering,curing ,cost
of all materials,conveyance of all materials to
worksite , payment of royalty, all taxes etc.all
complete as per approved drawing , P.H.
specification and direction of Engineer-in-
1000 liters capacity PVC water storage tank
supplying all materials, labour, T&P and
cutting holes through existing brick work
including making good the damages in
cement mortar (1:4) for taking G.I. Pipes and
fittings/ P.V.C. pipes and fittings including
watering, curing, cost & conveyance of all
materials to worksite, payment of royality,
taxes etc. all complete as per direction of
Engineer-in-charge.
Supplying all materials , labour, T&P and
cutting holes in RCC floors and roofs upto
19cm thick for passing P.V.C pipes and G.I
fittings etc. , and repairing the holes after
392 24 insertion of pipe etc. with cement concrete Each 4.00 198.12 792.49
(1:2:4) including finishing complete so as to
make it leak-proof as per P.H. specification
and direction of Engineer-in-charge
Supplying all materials, labour, T&P and
cutting grooves in pucca floors and walls for
taking G.I./P.V.C. pipes and making good the
damages including watering , curing , cost &
conveyance of all materials to worksite,
payment of royality, taxes etc all complete as
per direction of the Engineer-in-charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
fitting and fixing U-PVC SWR soil waste
ventilating pipes and fittings of the following
outside diameter conforming to ISI No
13592/1992 to walls with nails, bobbins and
wooden plugs or laying in trenches including
jointing with supply of approved rubber
394 26 lubricant by non-heat application method/as 0 0.00 0.00 0.00
per manufacturer's specification, testing,
earthwork in excavation in all kinds of soil and
refilling of trenches , cost & conveyance of all
materials to worksite, payment of taxes etc.
all complete as per P.H specification and
direction of the Engineer-in-charge.
110mm U-PVC SWR Pipe (Ori
Plast/Finolex/Supreme Make Type-B)
110mm U-PVC ‘P’ Trap(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC door bend(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Plain bend(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC offset without ear(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Cowl(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC S/Jn door(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Plain tee(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC D/Jn door(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Door tee(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Socket(Ori
Plast/Finolex/Supreme Make)
Supplying all materials, labour, T&P and
fixing vitreous china water closet, squatting
pan (Indian type W.C pan/Orissa pattern
squatting pan) duly embedded in cement
concrete (1:5:10) using 4cm size hard granite
metal including fixing a pair of vitreous china
250mm x 130mm x30mm footrest, fixing
100mm dia HCI 'p' or 's' trap (with/without
406 38 50mm dia horn) for water colset squatting 0 0.00 0.00 0.00
pan including jointing the trap with pan in
cement mortar (1:1) cutting the floor and
mending good the damages , cost &
conveyance of all materials to worksite,
payment of royality , taxes etc. all complete
as per P.H specification and direction of the
Engineer-in-charge.
580mm size Orissa pan
(Hindware/Parryware/Neycer make)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour T&P and and
fixing 12.50 liters/10 liters capacity low level
flushing cistern with a pair of cast iron or M.S.
brackets complete with fittings such as
siphonic arrangements 15mm nominal size
brass/pvc ball valve with polythene float CP
brass handle,unions and couplings for
connection with inlet, outlet and overflow
pipes, 32mm dia CP long flush bend, 15mm
408 40 dia pvc inlet connection pipe including cutting 0 0.00 0.00 0.00
holes and making good the same and
connecting the flush bend with cistern and
closet and connceting the inlet pipe with
suupply main , cost & conveyance of all
materials to worksite, payment of taxes etc.
all complete as per P.H specification and
direction of the Engineer-in-charge
10 ltr. Capacity pvc L.L. cistern with 32mm.
409 41 Dia CP long flush bend ( Slimline-white- Each 5.00 1868.53 9,342.65
Parryware make )
Supplying all materials,labour,T&P and fixing
Flat back lipped wall (Mini stall urinal -
630mmx180mm) urinal of the following sizes
including connecting the urinal with 32mm.
dia pvc waste pipe 910mm. long by means of
white lead mixed with chopped hemp, fixing
32mm. dia CP dome waste, 15mm. dia CP
spreader including cutting holes in walls and
making good the damages with supply of
wooden plugs, screws and cement etc. all
complete as per specification and direction of
the Engineer in charge Half stall urinal
Supplying all materials, labour, T&P and
fixing the following vitreous china Wash Down
Water Closet(European type W.C. pan)with
integral 'p' or 's' trap to the floor with wooden
plug and chromium plated pedestal screws
including jointing the trap with soil pipe in
cement mortar (1:1) fixing plastic seat and
411 43 cover for wash down water closet with 0 0.00 0.00 0.00
chromium plated brass hinges and rubber
buffers including polishing , cost &
conveyance of all materials to worksite,
payment of royality, taxes etc. all complete
as per P.H specification and direction of the
Engineer-in-charge
European water closet with 'p' trap
plain(Hindware/Parryware/Neycer make)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour T&P and fixing
wash basins with hole for pillar taps with cast
iron or M.S.brackets painted white including
cutting holes in walls and making good the
damages with supply of wooden plugs,
screws and cement etc, fixing pedestal for
wash basin recessed at the back for the
reception of pipes and fittings, fixing PVC
waste pipe of 32mm nominal diameter for
wash basin including brass check nut
complete, fixing pillar taps capstan head
screw down high pressure lettered 'Hot' and
'Cold' with long screws, shanks and back nuts
of 15mm dia nominal bore, fixing 15mm dia
PVC inlet connection pipe and making
connection with pillar cocks and supply mains
for wash basin, fixing 32mm dia CP brass
waste, cost & conveyance of all materials to
worksite, payment of taxes etc. all complete
as perP.H specification and direction of the
Engineer-in-charge
550mmx400mm W.H.basin
(Hindware/Parryware/Neycer make)with
414 46 15mm dia C.P.pillar cock (Plaza make) with Each 5.00 4656.52 23,282.58
Supplying all materials, labour, T&P and
fixing standard sized CP towel rail complete
with CP brass brackets fixed to wooden plugs
with CP screws as per specification and
direction of the Engineer in charge
416 48 25mmx600mm long CP towel rail Each 1.00 832.96 832.96
Supplying all materials, labour, T&P and
fixing standard sized glass-shelf with CP
brass brackets and guard rail complete fixed
to wooden plugs with CP screws as per
specification and direction of Engineer in
600mmx125mm plate glass shelf with CP/NP
Supplying all materials, labour, T&P and
fixing mirror of superior glass mounted on
6mm.thick A.C. sheet or ply wood sheet and
420 52 fixed to wooden plugs with CP screws and 0 0.00 0.00 0.00
washers complete as per specification and
direction of Engineer in charge.
600mmx450mm size B.E mirror (swivelled
Supplying all materials, labour, T&P and
fixing CP soap holder complete with CP brass
422 54 brackets fixed to wooden plugs with CP 0 0.00 0.00 0.00
screws as per specification and direction of
the Engineer in charge
Supplying all materials labor T&P & Fitting &
fixing CP shower with rim with supply of red
lead and yarn nail complete as per direction
of Engineer in charge.
425 57 ½” x 5” CP Shower (Plaza Deluxe Make) Each 1.00 572.77 572.77
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials , labour, T&P and
cutting holes through existing brick or laterite
masonry wall for taking U-PVC pipes and
426 58 fittings including making good the damages Each 12.00 232.11 2,785.27
etc. all complete as per P.H. specification and
direction of Engineer-in-charge
Supplying all materials , labour, T&P and
cutting of RCC chajja for taking HCI or U-
PVC pipe and fittings including making good
the damages etc. all complete as per P.H.
specification and direction of Engineer-in-
Supplying all materials ,labour ,T&P and
constructing Inspection Chamber of inside
size 760mmx760mmx460mm with cement
concrete (1:3:6) using 40mm size crusher
broken hard black granite metal on bed , KB
brick work in cement mortar (1:6) in
foundation and plinth, moulding and shaping
the channel inside and benching with cement
concrete (1:2:4) using 12mm size crusher
broken hard black granite chips, 12mm thick
cement plaster (1:3) with cement punning to
inside, cement flush pointing (1:3) to outside,
R.C.C cover slab (1:2:4) using 12mm size
crusher broken hard black granite chips with
R.C.C man hole cover, earth work in
excavation in all kinds of soil and refilling the
cavity around the chamber including
watering,curing,cost of all materials,
conveyance of all materials to worksite,
payment of royalty,all taxes etc.all complete
as per approved drawing, P.H specification
and direction of Engineer-in-charge
Inside size 76cmx76cmx46cm with 18” dia
Supplying all materials ,labour ,T&P and
constructing gully trap chamber of inside size
250mmx250mm with 8cm thick RCC precast
cover slab in cement concrete (1:2:4) mix
using 12mm size crusher broken HG chips,
foundation concrete (1:4:8) using 40mm size
crusher broken HG metal on bed and around
trap, KB brick work in cement mortar (1:6) in
foundation and plinth and inside 12mm thick
cement plastering (1:3) finished with a
floating coat of neat cement including fixing
100mmx100mm size HCI gully trap,
150mmX150mm size CI grating etc.all
complete as per drawing, specification and
direction of Engineer-in-charge
Supplying all materials labour T&P filling sand
in lavatories well watered and rammed
including lead of materials to work site.21.70
Supplying all materials, labour, T&P and
providing cement concrete ( 1:4:8 ) with 4cm
size crusher broken hard granite metal
including watering, curing, cost of all
432 64 materials,conveyance of all materials to work Cum 2.17 5831.32 12,653.97
site with payment of royalty, all taxes etc all
complete as per P.W.D specification and
direction of Engineer-in-charge 21.70 * 0.10
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing cement concrete ( 1:2:4 ) with
12mm size crusher broken hard black granite
chips including watering, curing,cost of all
433 65 materials, conveyance of all materials to work Cum 2.17 7921.58 17,189.82
site with payment of royalty, all taxes etc all
complete as per P.W.D specification and
direction of Engineer-in-charge 21.70 * 0.10
Supplying all materials, labour, T&P and
providing and fixing ceramic tiles in floors,
treads or steps and landing on 25mm thick
bed of cement mortar (1:1) ( 1 cement : 1
sand ) jointed with neat cement slurry mixed
with pigment to match the shades of the tiles
including watering, curing,cost of all
materials, conveyance of all materials to work
site , payment of royalty, all taxes etc all
complete as per P.W.D specification and
direction of Engineer-in-charge ( ceramic
floor tiles of premium grade having thickness
7mm to 8mm conforming to IS 13755 of size
Kajaria/Somany/Johnson tile 60cmx60cm
special printed series to be pre-approved by
the Engineer-in-charge )
Kajaria/Somany/Johnson tile 60cmx60cm
Supplying all materials,labour,T&P and
providing 12mm thick cement plaster(1:4) on
brick work including watering,curing,cost of all
materials, conveyance of all materials to
worksite,payment of royalty,all taxes etc.all
complete as per PWD specification and
direction of the Engineer-in-charge.
Supplying all materials, labour, T&P and
providing and fixing porcelain glazed tiles in
dado skirting on 12mm thick cement plaster
(1:3) jointed with neat cement slurry mixed
with pigment to match the shades of the tiles
including watering, curing,cost of all
materials, conveyance of all materials to work
site , payment of royalty, all taxes etc all
complete as per P.W.D specification and
direction of Engineer-in-charge( ceramic wall
tiles of premium grade having thickness
6.5mm to 6.7mm conforming to IS 13753 of
size Kajaria/Somany/Johnson tile
60cmx30cm special plain / printed series to
be pre-approved by the Engineer-in-charge )
Kajaria/Somany/Johnson tile 60cmx30cm
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Factory made single leaf rigid FRP(alternately
called GRP) sanwhch composite door shutter
of 32mm thick laminated ith two GRP skins
with wood grain finish fabricated using UV-
stabilised Isothealica Gelcoat and one layer
of 450 gsm E-glass chopped starand mat
(CSM) impregnated with orthopthalic
palyester resin. The thikness of the skins
shall not be less that 1.50mm expanded
polyestyrone(EPS) stuctural foam panel of 29
mm thickness and a density of 20Kg/cu.mtr
shall be used as core material .Wooden
reinforcements made of seasoned sal wood
reinforements for fitting the metal fittings such
as tower bolts ,aldrops,handles etc. shall be
provided .A Strictira; adehsive compatible
with(EPS) foam shall be used for bending the
core material,the sal wood reiforcements and
the skins.The materials and process for
manufacturing the door shutters shall
conform to RC-TIFAC composites Design
centre's standars and specifications and the
door shutters tested in conformation to
IS:40250-1998.The finish of door shutter will
be plain colour white/Lvory/beige/Light
grey/Mahogany/Teak wood of any other
colour using high quality pigments .Three
heavy whight mild steel butt hinges typpe-
I(ISI-marked) size 100 mm are to be fitted on
one side of shutter. 7 x 2.13 x 0.76
Factory made FRP (alternately called GRP)
door frame of sixe75mmX100 mm fabricated
using E-Glass chopped strand Mat(CSM) U.V
stabilised inopthalic Gelcoat and impregnated
with inopthalic resin.The thickness of the
GRP sikns shall no be less that 2.00 mm
.The door frame consist of foru segments
which are provided with plug-in-socket
arrangement in-site in the ,ould .The
segments are plugged in and are joined
together by means of screw . The GRP frame
shall be provided with wooedn rainforcement
of six locations for high screw holding
capacity for fixing metallic hold fast and shall
be consolidated by filling with medium destity
foam/Plaster of paris with fibre
reinforcement,Six numbers of 260mm X
25mm X 5 mm size 'S' shaped M.S flat hold
fast shall be provided with the frame .The
material and process for manufacturing the
door frames shall conform to RV-TIFAC
composites Design centre's stanards and
specifications.The finish of door rrame will be
plain colour white/Lvory/Beige/Light grey
Golden brown Mahogany/Teak wood sand
stone/Champagne /Pastel blue or any other
colour using high quality pigments cimplete in
all respect as per specification and direction
of the Engineer in Charge. 5.02 x 7
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing fitting and fixing (Aqua guard) pure
chill 80 PSS UV of size 750 x 570 x 1350mm
hight with water storage capacity 80 liter's
along with 2 noa of faucets 1 for cold water
and 1 for normal water including a flow of 1.5
ltr per munite etc all complete as per
approved drawing , specification and direction
of the Engineer in charge
452 84 Aqua guard pure Chill 80 PSS UV Each 1.00 102635.22 1,02,635.22
Supplying all materials, labour, T&P and
laying in trenches (to level or slope)
unplasticized P.V.C. pipe conforming to IS
4985/2000 of the following out side dia for
class- 3 (0.60mpa ) including jointing with
supply of approved solvent cement by non-
heat application method/as per manufacture's
454 86 specification, provoding and laying in trench 0 0.00 0.00 0.00
cement concrete (1:4:8) with 40mm size hard
granite metal in the type C-1 standard
bedding surrounding or encasing including
concrete for bedding and curing etc all
complete as per P.H. specification and
direction of the Engineer in charge
Supplying all materials labor T&P and
constructing MH chamber of sizes earth work
in excavation in all kinds of soil CC(1:1:8)
with black granite chips size 46mm brick work
with K.B. brick having crossing strength not
less than 75 Kg /CM2 to 90 Kg/CM2s in
CM(1:6)12mm C.P(1:8) inside MH chamber
over benching with cement slush pointing
(1:3)outside the MH chamber providing
457 89 painting MS or CI step iron RCC(roof of slab 0 0.00 0.00 0.00
with CC(1:2:4)with black granite chips size
12mm bending binding tying the grills placing
of the reinforcement providing RCC color of
required size refilling the cavity around the
MH chamber with excavated earth including
channeling the bed of MH etc all complete as
per PH specification.
MH size 0.91m x 0.91 m with 0.45 m (18” dia
Supplying all materials labour T&P and
constructing 1.80m dia x 2.60 m deep soak
way pit with dry brick having crossing strength
not less than 75Kg/CM2 to 99Kg/CM2 in
CM(1:6) for the remaining 0.4572mm height
of wall at top CC(1:3)inside and outside
inside fill with dry brick khoa size 38mm ,CM
thick RCC perforated slab to a height of
1.9012m from bottom covered by means of
50mmthick RCC wall cover in pieces filled
with iron plugs including earth work in
excavation refilling of cavity around the pit
and painting the iron works complete as per
PHD design and specification including
carriage of all materials to site.
460 92 1 no 30 Users Septic tank 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Earth work in excavation of foundation in all
kinds of soil within 50m initial lead and 1.5m
initial lift including rough dressing & breaking
461 93 clods to maximum 5cm to 7cm and laying in 0 0.00 0.00 0.00
layers not exceeding 0.30m in depth and as
per direction of the Engineer-in-Charge.
Extra lifts of 1.50 mtr or part thereof over the
initial lift of 1.5 mtr in all kinds of
embankments and road works and ordinary
earthwork in general.
Supplying all materials, labour, T&P and
providing cement concrete (1:3:6) with 4cm
size hard granite metal including watering,
curing, conveyance of all materials to
worksite, payment of royalty, taxes etc all
complete as per specification and direction of
the Engineer in charge
Supplying all materials, labour, T&P and
providing cement concrete (1:2:4) with 12m
size hard broken granite chips including
watering, curing, conveyance of all materials
to worksite, payment of royalty, taxes etc all
complete as per specification and direction of
the Engineer in charge
Supplying all materials, labour, T&P and
providing cement concrete (1:1½:3) with
12mm size crusher broken hard black granite
chips for RCC works including hoisting,
laying, watering, curing,cost of all materials,
conveyance of all materials to worksite,
payment of royalty,all taxes etc. all complete
as per PWD specification and direction of the
Engineer in charge.
Supplying all materials, labour, T&P and
providing steel reinforcement of Fe-415 /Fe-
500 grade for RCC work including
cutting,bending,binding and tying the grills
and placing in position including cost of
binding wire 18 to 20 gauge,cost of steel,
conveyance of all materials to worksite,
payment of royalty,all taxes etc all complete
as per PWD specification and direction of the
Engineer-in-charge.
Supplying all materials, labour, T&P and
providing rigid & smooth centering and
shuttering for RCC works including false work
and dismantling them after casting including
conveyance of all materials to worksite,
payment of royalty, taxes etc. all complete as
per specification and direction of the
Engineer-in-charge
RCC floor, roof slab chhaja up to 4.430 m
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials.labour.T&P and
providing brick work in foundation and plinth
with KB bricks having curshing strength not
less than 75 kg/sqcm with dimensional
tolerance+ 8% in cement mortar ( 1:3 )
479 111 including watering,curing,cost of all 0 0.00 0.00 0.00
materials,conveyance of all materials to
worksite,payment of royalty,all taxes etc.all
complete as per PWD specification and
direction of the Engineer in charge.
Supplying all materials,labour,T&P and
providing 12mm thick cement plaster(1:3) on
brick work including watering,curing,cost of all
materials, conveyance of all materials to
worksite,payment of royalty,all taxes etc.all
complete as per PWD specification and
direction of the Engineer-in-charge.
Supplying all materials, labour, T&P and
providing cement punning including watering,
curing, conveyance of all materials to
489 121 worksite, payment of royalty, taxes etc all sqm 16.17 39.18 633.48
complete as per specification and direction of
the Engineer in charge
Supplying all materials labour T&P and fitting
and fixing 12mm dia MS/CI step iron
490 122 including supply of necessary CC(1:2:4) for Each 5.00 324.26 1,621.32
fixing etc. complete as per PH specification.
Supplying all materials, labour T&P for
providing fitting & fixing 100mm x 100mm SW
Tee in wall including filling the recess with
cement concrete (1:2:4) with 12mm size HG
491 123 chips all complete including watering curing Each 2.00 466.10 932.20
conveyance of all materials to work site
payment of royalty all complete as per
specification and direction of Engineer in
Supplying all materials labor T&P filling sand
in foundation and plinth with well watered and
rammed etc all complete as per direction of
Engineer-in-charge.
Construction of 1nos production wells
including scientific source finding through
consolidated and unconsolidated rock with
down the hammer drilling rig or combination
rig with PVC pipe and installation of
submersible pump set with all acessories
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Labour for drilling a perfectly vertical bore
hole of specified dia for a specified depth
below ground level through consolidated and
unconsolidated rock with down the hole
hammer drilling rig or combination rig as
required to suit the site condition as per the
direction of the Engineer in charge including
use of own rig with its accessories, tools and
plant and consumables etc for lowering of
200mm/150mm dia G.I/P.V.C/M.S casing
pipes for housing fitted with socket and with
497 129 or without well screen as per the necessity for 0 0.00 0.00 0.00
soft, medium, hard and boulder formation
(G.I/ P.V.C/ M.S casing pipes if required to
prevent collapse of overburden is to be
provided by the contractor including lowering
and withdrawing after completion of the tube
well), 200mm dia to 400mm dia in
overburden portion including packing of
gravel supplied by the contractor for 400mm
498 130 Drilling of 200mm dia bore 0 0.00 0.00 0.00
501 133 Drilling of 150mm dia bore 0 0.00 0.00 0.00
Lowering the following size of G.I/P.V.C/M.S
housing pipes with or without slotted pipes as
per the necessity from ground level up to
45.00m depth and fitted and fixed up in
perfectly vertical position including cutting
and threading of pipes and slotted pipes and
supplying and fixing all jointing materials,
tools and plant etc all complete and keeping
the top of casing pipe threaded including
plugging tube wells to prevent entry of foreign
Lowering of 200mm dia P.V.C casing pipes
Supplying polyvinyl chloride pipes as per
ASTM-D-1785-89 having threads in
accordance with DIN 2999 part-1/DIN-42225
part-II specification length of pipe (laying
length) will be 3 mtrs. The pipes shall be
supplied with both external and threaded with
free socket. The pipe having external thread
at one end i.e female and or belled end. The
female end having internal thread is to be
507 139 belled in order to accept the male end while 0 0.00 0.00 0.00
jointing pipes with a bore threading shall be
provided with a greave at the roof of the male
thread accomodate flexible PVC/Rubber 'O'
ring to make the joint water tight colour of the
pipe shall be blue. The name of the
manufacture along with batch No class of
pipe shall be stranded legibly of each pipe
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing and providing sanitary sealing by
cement concrete grouting of annular space
around GI/PVC/MS housing pipe upto 5m
below ground level (as per drawing) to plug
the bore hole excluding cost of cement all
509 141 complete as per direction of the Engineer in Each 1.00 931.96 931.96
charge. Minimum one metre of casing pipe to
be inserted in the bore into the rock at the
bottom to ensure sanitary sealing (excluding
cost of cement which will be supplied directly
by the department)
Cleaning and developing the tube well with
supply of compressor worked till clear and
adequate discharge is obtained from the tube
well including supply and use of all necessary
equipment and labour as per direction of the
Engineer in charge
Supplying all materials, equipment, labour &
conducting reconnaissance survey,
integrated Hydrological and Geophysical
(Electrical Resistivity Method) survey &
selection of potential source for exploration of
Ground Water including selection and
recommendation of site for drilling wells in
selected locations in any part of Orissa under
the following Geological formation:
Rocky terrain with boulder formation for 300m
Supplying all materials, labour, T&P and
providing, fitting and fixing submersible pump
with squirrel cage induction type submersible
type submersible electric motor to run on 3
phase/1 phase line voltage ranging from 320
volt to 450 volt conforming to IS: 8034/89 with
following specifications with suitable control
panel, jointing with GI/PVC/HDPE pipes,
electrification, testing, commissioning, trial
running, conveyance of all materials to
worksite, payment of taxes etc all complete
as per specification and direction of the
Engineer in charge (Texmo/Crompton
Greaves/Kirloskar make)
1 H.P. Single phase/ three phase 3 stage
head renge of 20 to 35 mtr with discharge
515 147 capasity 145 to 110 L.P.M With outlet dia 25 Each 1.00 19749.90 19,749.90
mm (keeping 100% standby)
516 148 DOL Control panel Each 1.00 4490.49 4,490.49
517 149 40mm dia steel short piece Each 1.00 179.71 179.71
519 151 50mm size CI bracket Pair 1.00 107.73 107.73
521 153 20mm dia rigid UPVC pipes Mtr 30.00 8.14 244.26
522 154 Steel rope with cover Mtr 30.00 31.51 945.18
Labour charges for lowering including
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing and fixing to wall or ceiling and floor
HDPE pipes and pipe fittings conforming to
IS: 4984/2000 (10kgf/sqcm) of the following
nominal bore with clamps and jointing by
Fusion welding method including testing,
making good the wall, ceiling and floor all
complete as per specification and direction of
the Engineer in charge
32mm HDPE pipes (Finolex/Supreme make)
526 0 Sub-Total of Plumbing Works 0 0.00 0.00 12,12,904.43
527 0 Electrical Works 0 0.00 0.00 0.00
528 1 Sub-Head I (modular Wiring Items) 0 0.00 0.00 0.00
Point wiring in Recessed wirring to light
point/ fan point/ exhaust fan point/ call bell
point with 1.5 sq.mm FRLSH/LSZH PVC
insulated copper conductor of ISI marked, 20
mm dia PVC flexible non metallic conduit
FRLS type ISI marked, switch ISI marked ,
and ceiling rose ISI marked, of modular type
529 2 G.I box with metallic cover plate (both side) 0 0.00 0.00 0.00
falme retradant type) , of suitable size,
modular box with 1.5 sq. Mm FRLS PVC
insulated single core multistandard copper
conductor as earth wire including all
accessories and connection as per direction
Group control of point in Recessed wirring to
light point/ fan point/ exhaust fan point/ call
bell point with 1.5 sq.mm FRLSH/LSZH PVC
insulated copper conductor of ISI marked, 20
mm dia PVC flexible non metallic conduit
FRLS type ISI marked, with 6A modular
type(( falme retradant type)) switch ISI
marked, and ceiling rose ISI marked, of
modular type G.I box with metallic cover
plate (both side) falme retradant type), of
suitable size, modular box with 1.5 sq. Mm
FRLS PVC insulated single core
multistandard copper conductor as earth wire
533 6 including all accessories and connection as Nos 12.00 1234.28 14,811.36
per direction of Engineer -in -Charge.
CATAGORY AS FOLLOWS ,complete
suitable for Office.(Maximum 02 nos point in
one circuit).All the switches & sockets should
be warrantied for a replacement period of 10
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free after sales service within
warranty period for acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying ,fixing of 6A Plug on the same
board in existing switch board with complete
fitting by 01 no of 6A switch & socket
(modular type)( ( falme retradant type)) &
other required accessories of ISI marked as
approved as per direction of Engg. -in -
Charge. Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision) or equievalant
reputed make & model A catagory ISI marked
as approved, complete suitable for for
HOSTEL.(Maximum 02 nos point in one
circuit).All the switches & sockets should be
warrantied for a replacement period of 10
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within warranty
period for acceptance of materials.
Supplying,fixing of 6A Plug on the separate
board with complete fitting by 01 no of 6A
switch & socket(modular type)( ( falme
retradant type)) with suitable size modular
box & cover( falme retradant type) including
supplying of all required accessories of ISI
marked as approved as per direction of engg-
in-charge..Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision) or equievalant
make & model ISI marked as approved ,
complete suitable for Residence.(Maximum
02 nos point in one circuit).All the switches &
535 8 sockets should be warrantied for a period of Nos 14.00 604.16 8,458.24
10 years against manufacturing defects
against which ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free aftersales service within warranty period
for acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying,fixing of 1x16A Plug on the
separate board with complete fitting by 01 no
of 16A switch & socket(modular type)( falme
retradant type)) with suitable size modular
box & cover( falme retradant type) including
supplying of all required accessories of ISI
marked as approved as per direction of engg-
in-charge.. Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision)or equievalant reputed
make A catagory ISI marked as approved,
(For equipement power)All the switches &
sockets should be warrantied for a
replacement period of 10 years against
defects with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Receass wiring for circuit/submain wiring with
the following mentioned size PVC
FRLSH/LSZH insulated, copper conductor,
single core cable (Finolex/Anchor/Polycab/
HAVELLS/RR KEBLE) or equievalant reputed
make A catagory ISI marked as approved, in
recessed PVC conduit Heavy duty FRLS of
mentioned size (AKG/Anchor/Kinjal or
537 10 equievalant ISI marked as approved) as 0 0.00 0.00 0.00
required as per direction of Engg.-in-Charge.
Ncessary test report & Warrnaty certificate to
be submitted to the department for genuinity
of product & to avail free after sales service
within warranty
period for acceptance of materials
2 nos single core 1.5 sq. mm copper wire for
phase and neutral and 01 no of single core
1.5 sq. mm copper wire for earth continuty
conductor. In 20 mm dia non metallic heavy
duty flexible conduit (LDB to LSB/LIGHT
2 nos single core 2.5 sq. mm copper wire for
phase and neutral and 01 no of single core
1.5 sq. mm copper wire for earth continuty
conductor in 20 mm dia non metallic
539 12 heavy duty flexible conduit.(BDB to Mtr 211.00 174.64 36,849.04
LSB/LIGHT CKT/5A PLUG/INVERTER
POINT TO EACH QTR) (2X2.5+1X1.5)
4 nos single core 2.5 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
540541 13 conductor .in 25 mm dia non metallic Mtr 155.00 312.70 48,468.50
heavy duty flexible conduit(LDB to LSB/5A
SOCKET) (4X2.5+2X2.5)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
2 nos single core 4 sq. mm copper wire for
phase and neutral and 01 no of single core
1.5 sq. mm copper wire for earth continuty
conductor in 20 mm dia non metallic heavy
542 14 duty flexible conduit .(PDB to PSB/ GAYSER Mtr 25.00 194.70 4,867.50
POINT/AC POINT/ROOM LIGHT CONTROL
TO CORRIDOOR POINT/DG PANEL
ESSENTIAL LOAD) (2X4+1X1.5)
4 nos single core 4 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
conductor in 32 mm dia non metallic heavy
543 15 duty flexible conduit.(PDB to PSB/GAYSER. Mtr 25.00 292.64 7,316.00
POINT/AC POINT/DG PANEL ACCL TO
EACH QTR ESSENTIAL LOAD)
2 nos single core 6 sq. mm copper wire for
phase and neutral and 01 no of single core
2.5 sq. mm copper wire for earth continuty
544 16 conductor in 25 mm dia non metallic heavy Mtr 16.00 231.28 3,700.48
duty flexible conduit .(LFDB TO LBDB)
4 nos single core 6 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
545 17 conductor in 32 mm dia non metallic Mtr 15.00 346.92 5,203.80
heavy duty flexible conduit.(LFDB TO
LBDB/power unit/point) (4X6+2X2.5)
4 nos single core 10 sq. mm copper wire for
phase and neutral and 02 nos of single core
4 sq. mm copper wire for
546 18 earth continuty conductorin 32 mm dia non Mtr 15.00 496.78 7,451.70
metallic heavy duty flexible conduit .(LFDB
TO FLOOR PANEL TO TPN
Supplying and fixing 20 amps, 240 volts,
SPN, industrial type socket outlet, with 2 pole
and earth metal enclosed plug top along with
32 amps. C-series, SP MCB, in sheet steel
enclosure, on surface or in recess, with
chained metal cover for the socket outlet, and
complete with connections, testing and
commissioning etc. as required as per
direction of Engg.-in- Charge.. . Make-
Legrand/Schneider/Siemens/panasonic or
equievalant reputed make & model A
547 19 catagory ISI marked as approved,All the Nos 5.00 733.96 3,669.80
Components should be warrantied for a
replacement period of 5 years against
defects with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing following size/ modules,
GI box along with modular base & metallic
cover plate (both side) plate for modular
switches in recess etc as
required as per direction of
Engg.-in-Charge. MAKE-
Legrand/Siemens/Anchor/Panasonic/
Schneider or equievalant reputed make &
model A catagory ISI marked as approved
.All the Components should be warrantied
for a replacement period of 5 years
against defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free aftersales service within warranty period
for acceptance of materials.
Supplying and fixing of following sizes of
medium class PVC FRLS conduit ISI
marked along with accessories in
surface/recess including cutting the wall
and making good the same in case of
recessed conduit as required as per
direction of Engg.-in-Charge .MAKE
KINJAL/ AKG/Anchor or equievalant
reputed make A catagory ISI marked as
Supply and fixing modular type
indicator on the existing switch
box/cover . Equievalant higher model
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make &
model A catagory ISI marked as approved
as required as per direction of Engg.-in-
555 27 Charge.All the Components should be Nos 8.00 127.44 1,019.52
warrantied for a replacement period of 5
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within warranty
period for acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and installation of
AC starter Modular type,
Equievalant higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model
A catagory ISI marked as approved coil
voltage-415 Volt A.C. & O/L range of 9-
14A range on mod Box of suitable size
including modular coveras required as per
556 28 direction of Engg.-in-Charge .All the Nos 5.00 731.60 3,658.00
Components should be warrantied for a
replacement period of 5 years against
defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
Supply and fixing CALL bell (Ding dong
type) /Buzzer on the existing switch
box/cover. Equievalant higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model
A catagory ISI marked as approved .as
required as per direction of Engg.-in-
Charge.All the Components should be
warrantied for a replacement period of 5
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within warranty
period for acceptance of materials.
S/F of Bakelite angle holder/batten holder
(make-Anchor/Havells/Panasonic or
equievalant reputed make A catagory ISI
marked as approved )of ISI marked
conforming to IS-1258/1987 in place of
ceiling rose as per direction of Engg.-in-
Charge .All the Components should be
558 30 warrantied for a replacement period of 5 each 12.00 73.16 877.92
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within warranty
period for acceptance of materials.
Supplying,fixing of Blanking plate(modular
type)( falme retradant type)) in existing
switch box(anti bactorial & falme retradant
type) including supplying of all required
accessories of ISI marked as approved as
per direction of engg-in- charge. complete
suitable for IPH standard hospital.It should
be warrantied for a period of 10 years
559 31 against manufacturing defects against which Nos 12.00 49.56 594.72
ncessary test report & Warrnaty certificate to
be submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
560 32 Sub-Head II (Light fitting Fixture & Fan) 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying, installation, of exhaust fan of
heavy duty 300 mm sweep (Make-
Equievalant higher model with 5 star rated of
Havells/almonard/Anchor/Panasonic/Usha/Ha
lonix or equievalant reputed make & model A
catagory ISI marked as approved ) of
561 33 exhaust fan in the existing wall, including Nos 8.00 3693.40 29,547.20
fixing & conntection as required as per
direction of Engg.-in-Charge. Replacement
Warranty will be 5 years.
Supplying, installation, testing and
commssioning of 1400 mm sweep white/milky
colour ceiling fan Make-Equievalant higher
model with 5 star rated of
Havells/almonard/Anchor/Panasonic/Usha/Ha
lonix or equievalant reputed make & model A
catagory ISI marked as approved ) including
562 34 wiring the down rod of standard length (upto Nos 8.00 2616.06 20,928.48
30 cm) with 1.5 sq mm PVC insulated, copper
conductor, single core cable etc. as
required.(With fan Regulator) as required as
per direction of Engg.-in-
Charge.Replacement Warranty will be 5
Supplying, installation, testing and
commssioning of 1200 mm sweep
white/milky colour ceiling fan Make-
Equievalant higher model with 5 star rated
of Havells/almonard/Anchor/Panasonic/Usha
/Halonix or equievalant reputed make &
model A catagory ISI marked as approved )
563 35 including wiring the down rod of standard Nos 15.00 2514.58 37,718.70
length (upto 30 cm) with 1.5 sq mm PVC
insulated, copper conductor, single core
cable etc. as required as per direction of
Engg.-in- Charge,Replacement Warranty will
be 5 years.. .(With fan Regulator)
Supplying and fixing of Energy efficient
surface mounted square shape 18 W LED
luminaire of dimension of 225x 225 x 35 mm
consists of white powder coated , die-cast
Alluminium housing with high quality frosted
diffuser for glare-free uniform lighting
distribution with wattage not more than 20
watt and lumen output of 1500 lumens, , CRI
not less than 80,CCT of 6000 degree K,THD
less than 10%, with electronic driver, internal
surge protection of 2.5 KV , L70 B50: 30000
hrs (2 yrs warranty) and all other accessories
suitable for operation on 220 V to 240 V
supply as required as per direction of
Engg.-in-Charge. ( Make :
(Make: wipro LD80-171-60-XX-SM
or similar model of LT/Trilux
/Philips/Panasonic/HALONIX or equievalant
reputed make & model A catagory ISI marked
as approved).The luminaire should be
Replacement Warranty will be 5 years
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
SITC of energy efficient LED tube light fittings
with decorative alluminium batten and LED
tube light having power rating not more than
20 watt and lumen output not less than
2200 lumen complete with electronic
driver and all other accessories with
diffuser having 5 years warranty i/c
connection etc as required as per direction
of Engg.-in-Charge. ( (Make: wipro LL20-
221 --or similar model of LT/Trilux
/Philips/Panasonic/HALONIX or
equievalantreputed make & model A
catagory ISI marked as approved.). The
luminaire should be Replacement Warranty
will be 5 years .
SITC of Sleek LED 10-12 watt mirror
light fitting with extruded polycarbonate
housing,High optically efficient
diffuser,above wash basin complete with all
accessoriesetc. directly on wall, including
connection with 1.5 sq. mm FRLS PVC
insulated, copper conductor, single core
cable and earthing etc. as required as per
566 38 direction of Engg.-in-Charge. Nos 6.00 868.48 5,210.88
( Make : WIPRO Model No:LL20-111-XXX-
60-NE or similar model of
PHILIPS/Panasonic/HALONIX or
equievalant reputed make & model A
catagory ISI marked as approved. )The
luminaire should be Replacement Warranty
will be 5 years
Supplying and fixing of Energy efficient
recess mounted LED luminaire with white
powder coated ,pressure die-cast Al housing
,with high transmititivity,non-yellowing PMMA
diffuser, with wattage not more than 20 watt
and lumen output not less than 2600 Lumen (
120 lumens/watt ) of size240 x240 x 40 mm ,
,CRI not less than 80,CCT of 5700-6500
degree K,THD less than 10%, with Non
integrated isolated driver (protects the output
/secondary side from any disturbance on the
input / primary side ensuring safe operation),
all other accessories , life : 50,000 burning
hours (5 years warranty) , Internal surge
protection of 3 KV suitable for operation on
230 V, 50 Hz supply as required as per
direction of Engg.-in- Charge. (Make: wipro
LDB1-171-XXX-60-SM or similar model of
LT/Trilux /Philips/Panasonic/HALONIX or
equievalant reputed make & model A
catagory ISI marked as approved.) The
luminaire should be Replacement Warranty
will be 5 years.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying, installation, testing and
commssioning of 400 mm sweep wall fan
Make-Equievalant higher model with 3 star
Havells/almonard/Anchor/Panasonic/Usha/Ha
lonix or equievalant reputed make & model A
catagory ISI marked as approved ) including
wiring with 1.5 sq mm PVC insulated, copper
conductor, single core cable
Supplying and fixing extra conduit down rod
of 20 cm length G.I. pipe 15 mm dia, heavy
gauge including painting etc. as requiredas
required as per direction of Engg.-in-Charge .
569 41 (Note : More than 5 cm length shall be Nos 25.00 38.94 973.50
rounded to the nearest 10 cm and 5 cm or
less shall be ignored)of ISI mark as
BDBS,DB,AC DB,FLOOR PANELS,MCBS
Supplying and fixing of following
mentioned way, three pole/single pole
and neutral, sheet steel,double door MCB
distribution board, 415 volts/240 volts shall be
as per IEC 61439-3,integrated door earthing
system offering additional safety to the
user,High quality polyurethane Gasket,the
box and cover shall be fabricated to
withstand IK09,the DB should be properly
pre-treated with 7 tank process and duly
powder coated, phosphatized with powder
coated finish, on surface/recess, complete
with terminal blocks,with suitable size FR
PVC insulated copper conducter up to
terminal blocks, tinned copper busbar, neutral
busbar, earth bar, din bar. Make-LEGRAND-
Ekinox3 DB/ Siemens-Betaguard/
4 Way(8+12) Way TPN MCB DD DB
Horizontal Type as per IEC 61439-3 suitable
for Flush mounting and Surface mounting
with 100A Copper Bus Bar for each phase,
with neutral Bus bar, Earth Bar & Cable ties
for cable management, prefitted masking
sheet, IP43-IK09 with metal door(FOR
LIGHT,POWER INDOOR,3-PH,POWER
LOAD) Warranty on DB is 2 years.
Supply and fixing of 12 way DD single pole
and neutral sheet steel MCB distribution
board 250V on surface/recess complete with
tinned copper bus bar, neutral bus bar,
earth bar, din bar, detachable gland plate,
interconnections, phosphatized and powder
573 45 painted including earthing etc. as required Nos 2.00 2254.98 4,509.96
(but with out MCB/ RCCB/ Isolator) (ALL
LIGHT WITH CORRIDOOR/COMMON
AREA,EM LIGHT,UPS LOAD, EM LOAD
LIGHT LOAD,POWER LOAD )
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
2+4 way MCB Enclosure DB (GLAZED
574 46 door)(only each EM. CONNECTION UPS Nos 1.00 1932.84 1,932.84
Supplying and fixing 20 amps rating, 240
volts, C series, Double poles MCB of
Make-LEGRAND-Ekinox3 DB/ Siemens-
Betaguard/ Schneider- Acti 9/L&T
(Equievalant model)/Panasonic(Equivalant
model) /ABB(Equivalant model) or
equievalant reputed make & model A
catagory ISI marked as approved in the
existing MCB DB complete with
connections as per direction of Engg.-in-
Charge. The MCB should be Replacement
Warranty will be 5 years .MCB should have
the fault indication system in different colour
for ON, OFF & TRIP condition or Mid trip
position for Trip conditions for
easier identification of fault.Warranty on MCB
Supplying and fixing 6 amps to 32 amps
rating, 240 volts, C series, single poles
MCB of Make-LEGRAND-Ekinox3 DB/
Siemens-Betaguard/ Schneider- Acti 9/L&T
(Equievalant model)/Panasonic(Equivalant
model) /ABB(Equivalant model) or
576 48 equievalant reputed make & model A Nos 36.00 158.12 5,692.32
catagory ISI marked as approved. the
existing MCB DB complete with connections
as per direction of Engg.-in-Charge. The
MCB should be Replacement Warranty will
be 5 years.MCB should
Supplying and fixing 25Amps DP
240 volts, RCCB,300mA Make-
Equievalant higher model of
Legrand/Snheider/Siemens / L&T/Panasonic
/ABBor equievalant reputed make & model A
577 49 catagory ISI marked as approved in the Nos 2.00 1994.20 3,988.40
existing MCB DB in the existing MCB DB
complete with connections as per direction of
Engg.-in-Charge. The RCCB should be
Replacement Warranty will be 5 years
Supplying and fixing 40Amps DP
240 volts, RCCB,300mA Make-
Equievalant higher model of
Legrand/Snheider/Siemens / L&T/Panasonic
/ABB or equievalant reputed make & model
A catagory ISI marked as approved in the
existing MCB DB in the existing MCB DB
complete with connections as per direction
of Engg.-in- Charge. The RCCB should be
Replacement Warranty will be 5 years
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing 63Amps
TPN 415 volts, RCCB,300mA
Make-Equievalant higher model of
Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant
reputed make & model A catagory ISI
579 51 marked as approved in the existing MCB Nos 2.00 3121.10 6,242.20
DB in the existing MCB DB complete
with connections as per direction of Engg.-
in- Charge.(for power BDB & AC ODU, 8 way
TPN BDB IC).The RCCB should be
Replacement Warranty will be 5 years
580 52 (Earthing) INSTALLATION 0 0.00 0.00 0.00
S/IT/C of materials and installation of pipe
earth electrode made out of 50mm dia class
B G.I. pipe of 3.0 metre long with
581 53 arrangements for fitting/ termination of G.I. Nos 3.00 2987.76 8,963.28
flat / wire with G. I. nut bolts & washers
Providing and fixing 4 mm dia copper wire on
surface or in recess for loop earthing as
required.as per direction of Engg.-in- Charge.
Providing and fixing 25mm x 5 mm copper
strip on surface or in recess for connections
etc. as required as per direction of Engg.-in-
CABLING AND END TERMINATION MAIN
Supplying of one number PVC insulated
armoured and PVC sheathed XLPE property
AL. conductor power cable of 1.1 KV grade
POLYCAB/HAVELLS/Finolex or equievalant
reputed make ISI marked as approved of
following size cables as per direction of
585 57 Engg.-in-Charge. Ncessary test report & 0 0.00 0.00 0.00
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free after sales service within warranty period
for acceptance of materials
4core x 16 sq mm (MDB TO FDBL/FDBU
4 core x 4 sq mm (for small power/LIGHT TO
588 60 3.5core x 35 sq mm (To power MDB) Mtr 73.00 257.72 18,813.84
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
exceeding 25 SQ. MM direct in ground in the
trench in one horizental formation including
excavation ,sand coushing protection
covering and refilling the trench etc as
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
exceeding 25 SQ. MM direct in ground in the
EXISTING PIPE etc as required as per
direction of Engg.-in -charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
25 SQ. MM but not exceeding 400 SQ. MM
direct in ground in the EXISTING PIPE etc as
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
593 65 exceeding 25 SQ. MM in open duct etc as Mtr 8.00 42.48 339.84
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
25 SQ. MM in open duct 400 SQ. MM direct
in ground in the EXISTING PIPE etc as
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated
/XLPE power cable of 1.1 kv grade size
not exceeding 25 SQ. MM in surface
with shaddle and screw etc as required as
per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
exceeding 120 SQ. MM From 25 SQ. MM in
surface with shaddle and screw etc as
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
exceeding 400 SQ. MM From 120 SQ. MM in
surface with shaddle and screw etc as
required as per direction of Engg.-in -charge.
Supplying and making end termination with
brass compression gland and aluminium lugs
598 70 for following mentioned size cable.as per 0 0.00 0.00 0.00
direction of Engg.-in-Charge.
Providing,fixing and laying of fallowing dia
601 73 G.I. pipe (medium class) in ground complete 0 0.00 0.00 0.00
with G.I fitting incl. trenching(75
Providing,fixing and laying of fallowing dia
HDPE pipe (medium class) in ground
603 75 complete with fitting incl. trenching(75 mm 0 0.00 0.00 0.00
depth)and refilling as per direction of Engg.-in-
S/I/T&Commissioning of LT indoor floor
mounted cubical type electrical main panel
(for both light and power circuit) made out by
2mm CRCA steel sheet duly derusted &
pented by simens gray powder cote paint is
designed as G.A drawing as per direction of
Engg.-in-Charge. Warrentee period of
replacement of panel & accessories must be
5 years & compelete
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
In commer Main- 01 number of 125(80-
125) Amps 4P MCCB with Rom & sprader
link,25 Ka & 01 nos of 63A 4P O/L
changeover switch for DG & Servo. . (make-
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked)(Icu=100%Ics)with shunt trip.with
axulary for BMS
Busbar- 04 numbers of 200Amps
Electrolytic copper busbar duly sleeved by
609 81 color coaded PVC sleeve & supported by 0 0.00 0.00 0.00
suitable size DMC insulator.
Busbar DG - 04 numbers of 60 Amps
Electrolytic copper busbar duly sleeved by
color coaded PVC sleeve & supported by
suitable size DMC insulator.
Out going- (i) 63A 4P MCB 2 NOS FOR
611 83 POWER BDB GF,1f(Legrand/Schneider 0 0.00 0.00 0.00
Out going- (ii) 02 nos 32A 4P MCB LIGHT
BDB AC IDU BDB/LIGHT
BDB,LIFT,WATER,solar,ups(Legrand/Schnei
Out going- (iii) 01 no 32A 2P MCB LIGHT
BDB AC IDU BDB/LIGHT
BDB,LIFT,WATER,solar,ups(Legrand/Schnei
Instrument- (i)3 numbers phase indicating
614 86 lamp with toggle switch & HRC fuse. 0 0.00 0.00 0.00
(ii) 01 set of digital type multifunction meter
voltage,current,frequency,PF,THD indication
HOT DIPP GALVANIZED(GC) AS PER EN-
ISO-1461 , CARBON STEEL WIRE MESH
CABLE TRAYS with internal
dimensions of size 54mm(H) x 200mm(W),
of Legrand - Cablofil make or equievalant
reputed make & model A catogory, ISI
marked as approved .The Load bearing
capacity of the Cable Trays should be
minimum of 104.8Kg/meter at the span of
1.5Meter as per UL specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee
HOT DIPP GALVANIZED(GC) AS PER EN-
ISO-1461 , FLOOR RACE WAY WITH
JUNCTION with internal
dimensions of size 54mm(H) x 200mm(W),
of Legrand - Cablofil make or equievalant
reputed make ISI marked as approved .The
Load bearing capacity of the Cable Trays
617 89 should be minimum of 104.8Kg/meter at the mtrs 4.00 1295.64 5,182.56
span of 1.5Meter as per UL
specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required.
618 0 Sub-Total of Electrical Works 0 0.00 0.00 6,90,261.31
619 0 Firefighting Works 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
620 1 EXTINGUISHER SYSTEM 0 0.00 0.00 0.00
Portable Fire Extinguisher System
Supplying, installation, testing and
commissioning of CO2 type Fire
Extinguisher 4.5 kg capacity confirming to
IS: 2878 made from ISI marked
seamless cylinder confirming to IS:
621 2 7285, fitted with ISI marked controlled Nos 3.00 12302.68 36,908.04
valve confirming to IS: 3224, high
pressure 1mtr discharge hose & horn
complete with initial gas charged with
carrying handle & wall mounting bracket
as per direction of Engineer-in- charge.
Providing and installing in position the
following type of sign boards made out of
3mm thick "Opaque" PVC foam board
622 3 with computer cut, PVC non- reflective 0 0.00 0.00 0.00
self adhesive vinyle painted foam board,
complete with mirror fasteners.
Providing and fixing the signages "Fire Exit,
Fire Exit Arrow Down,Fire Exit Arrow
Left,Fire Exit Arrow Right" of 1.5in height
623 4 letters in white with green back ground.The Nos 5.00 1080.88 5,404.40
size of the board shall be 25cm x 15 cm and
shall be fixed at the height of 2 mts
624 0 Sub-Total of Firefighting Works 0 0.00 0.00 42,312.44
625 Grand Total 98,63,751.95
625 Grand Total 98,63,751.95
Abstract Estimate for Package No. BOL-001-NHM : Construction of DAY CARE PHC At
G.DEPHAGUDA,GUDARI,RAYAGADA,ODISHA
*Rates including taxes
Head Description of Item Unit Qnty. Rate Amount
Earthwork in excavation in hard soil for site
leveling, foundation, pits, trenches and other
civil works upto and including 1.5metre lift
and stacking the soil upto a lead of 100 metre
2 1 and including dewatering, removing slush, 0 0.00 0.00 0.00
shoring and strutting (as required), complete
as per specification and as directed by the
Engineer-In-Charge.
Filling in foundation trenches and plinth, with
excavated earth including laying the earth in
layers not exceeding 23.5 cm thick ramming
4 3 & watering with all leads & lifts including cost Cum 190.92 135.58 25,885.32
of all labour,T&P completed as directed by
the Engineer-in-charge.
Supplying and filling sand in foundation and
over areas including watering, ramming,
consolidating and dressing, labours, tools,
taxes etc. all complete as per the
specification and direction of Engineer-In-
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Diluting and injecting chemical emulsion (to
be supplied free of cost at site of work) for
PRE CONSTRUCTIONAL Anti-termite
treatment and creating a continuous chemical
barrier under and all-round the column pits,
wall trenches, basement excavation, top
perimeter of building, expansion joints, over
the top surface of consolidated earth on
which apron is to be laid, surroundings of
pipes and conduits etc. complete as per
specifications (plinth area of the building at
ground floor only shall be measured for
Providing and laying plain cement concrete
1:3:6 (1 cement : 3 sand : 6 stone agregate
40mm nominal size) as levelling course in
floor and plinth including tempering, curring,
shuttering etc. complete all depth and height.
Providing and laying plain cement concrete
1:2:4 (1 cement: 2 sand: 4 stone aggregate
12mm nominal size) as levelling course in
8 7 foundation and plinth etc. including 0 0.00 0.00 0.00
tempering, curring, shuttering etc.complete all
depth and height.
First class Fly ash Brick masonry using
bricks of size 25 cm. x 12 cm. x 8 cm. having
crushing strength not less than 75 kg. Per.
Sqr. Cm. in cement mortar of mix( 1:6) with
ordinary Portland slag cement(PSC) and
screened & washed sand for mortar after
immersing the bricks for 6 (Six) hours in
water before use in Foundation & Plinth
including splays cutting, circular moulding,
corbelling, chamfering and similar such type
of works, watering and curing etc. including
cost, conveyance, loading, unloading,
royalties and taxes of all materials, cost of all
labour, scaffolding, sundries, T&P required
for the works etc. complete in all respect as
directed by the Engineer-in-Charge.
Fly Ash. brick masonry of size 25 cm. x 12
cm. x 8 cm. having crushing strength not less
than 75 kg. Per Sqr. Cm. in cement mortar of
mix (1:6) with approved grade cement and
screened & washed sand for mortar after
immersing the bricks for 6 (Six) hours in
water before use in Superstructure including
splays cutting, circular moulding, corbelling,
11 10 chamfering and similar such type of works, 0 0.00 0.00 0.00
watering and curing etc. including cost,
conveyance, loading, unloading, royalties and
taxes of all materials, cost of all labour,
scaffolding, sundries, T&P required for the
works etc. complete in all respect as directed
by the Engineer-in-charge
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Half brick work with Fly Ash brick masonry in
cement mortar (1:4) in super structure
having a crushing strength of not less than 75
kg./sqcm with dimensional tolerance ± 2%
including splays cutting circular moulding
chamfering and corbelling and similar such
type of works with all necessary projections
watering and curing after immersing the
bricks in water at least for six hours before
use including cost, conveyance, royalties and
taxes of all materials with all labour,labour
cess and T & P required for the work
complete in all respect as per direction of
Engineer-in-Charge.
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-20 grade
as per approved designs and drawings
having a minimum compressive strength (in
work test) 200 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test
conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened and
washed sharp sand for mortar of approved
quality from approved quarry, washed and
cleaned ( 20mm. size chips not to exceeds 25
% ) to be mixed in concrete mixture with
Portland slag cement (PSC) including
hoisting, lowering, laying and compaction
concrete by using vibrators, watering and
curing for 28 days, centering and shuttering
then after dismantling and removing debris
from the work site and finishing the exposed
surface smooth providing grooves or beads
wherever necessary including cost,
conveyance, loading, unloading, royalties and
taxes of all materials and cost of all labours,
sundries, T & P required of the work etc.
complete in all respect as directed by the
Engineer-in-Charge. But excluding cost and
conveyance of M.S. rods or Tor steel and
binding wires and labour charges for
straightening, cutting, bending etc. of M.S.
rods or tor steel tying the grills and placing in
proper position.
19 18 b) Column up to plinth Cum 5.85 16102.52 94,200.23
21 20 f) Column above plinth Cum 11.29 16102.52 1,81,858.77
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Cutting, straightening coiled or bent up M.S.
Rod or tor steel of SAIL/ TATA / RINL
(VIZAG) make including bending, binding,
welding and joining if necessary and tying the
grills and placing in position as required for
R.C.C. Work and for providing fan hooks as
required, hoisting, lowering, laying including
cost, conveyances, taxes of M.S. Rod or tor
steel and binding wires of 18 to 20 gauge and
labour required for the work for bending,
binding and tying the grills in all floors (Linear
measurement will be taken and quantity will
be calculated basing on the standard weight
of B.I.S. for M.S. Rods or tor steel only.
Wastage if any, including weight of binding
wire will not be considered for measurement)
etc. complete as per specification & direction
of Engineer-in-charge.
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:6 (1
34 33 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
16mm cement plaster to inside of brick
surfaces with cement mortar of mix 1:6 (1
37 36 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
6 mm cement plaster on RCC surfaces at
ceiling/slab soffit and other locations with
cement mortar of mix 1:4 (1 cement : 4
coarse sand) including necessary scaffolding,
curing etc. all complete at all floors and all
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.40 sqm. (20mm thick) of
approved make in floors laid on 20 mm thick
cement mortar (1:4) (1 cement : 4
43 42 course sand) and filling joints with slurry 0 0.00 0.00 0.00
including cost of all materials, labour T&P etc.
required for the work all complete incl.
rubbing as per direction of the Engineer-in-
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.10 Sqm & up to 0.4 sqm
(10mm. thick) of approved make in dadoes
laid on 12 mm thick cement mortar (1:3)
(1 cement : 3 course sand) and filling joints
with slurry including cost of all materials,
labour T&P etc. required for the work all
complete incl. rubbing as per direction of the
Engineer-in-charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting & fixing of 8-10 mm thick &
size of 600x600 mm vertified floor tile of
matt finish with veilcraft (VC/FT ) shield(
Scratch free/stain free) with water absorption
limit between 0.08% to 3% and conforming
to IS : 15622:2006 (Group B Ib). laid on 20
mm thick cement mortar (1:4) (1 cement : 4
course sand) and filling joints with white
47 46 cement of approved quality including cost of 0 0.00 0.00 0.00
all materials, labour T&P etc. required for the
work all complete as per direction of the
Engineer-in-charge (for New Work only )
Supplying, fitting & fixing of 8-10 mm thick
and size of 600x600 mm vertified wall tile of
in dadoes, skirting and risers of steps of laid
on 12 mm thick cement mortar (1:3) (1
cement : 3 course sand) jointed with slurry
mixed with pigment to match the shades of
49 48 the tiles etc. complete including cost of all 0 0.00 0.00 0.00
materials, labour T&P etc. required for the
work all complete as per direction of the
Engineer-in-charge.
Providing and fixing seasoned sal wood work
in frames at any locations including doors,
windows,cupboard, clerestory and other
frames fixing in position including cost of
hinges, M.S. flat (30mm x 6mm) hold fasts
lugs or dash fasteners of required dia and
length as per drawing / specification, at all
floors and all heights.
Factory made 30mm/32mm flush door shutter
(Laminates both side of frame) with all labour,
iron fittings, and wooden hinged cleats etc
fitted and fixed complete in all respect.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing & fixing of Factory fabricated
WINPLUS® Aluminium Door Systems - For
sliding windows, made from 6063 alloy and T-
6 tempered aluminium profile, in approved
shade of hybrid /purepolyster surface coating
(50-60micron Powder Coat), mechanically
mitred & jointed with casted / aluminium
extruded corner cleats along with Sliding
window Flush Lock, Bearing Rollers ,
Siliconised Weather strip and 5mm ET 125
toughened glassas infill shall be fitted into
Shutter using siliconised microwave treated
55 54 EPDM gaskets excluding taxes of all 0 0.00 0.00 0.00
materials and cost of all labours required for
the work etc. complete in all respect as
desired by the Engineer in charge. Note -
conveyance, T&P and scaffolding are not
included herein.
Providing and fixing factory made 2 track 2
panel KOMMERLING uPVC white colour
sliding window comprising of uPVC multi-
chambered frame having section Frame
58mm x 49mm, Window sash: 37mm x
61mm, made out of lead free green profiles
with corners fusion welded, fully reinforced
with Galvanized steel 1.5/2.0 mm. The
windows profile should fulfill the requirements
of Viny 2010. The physical properties of the
profiles like Vicat softening temperature,
density, tensile strength, hardness,
weatherability, impact strength and Modulus
of Elasticity should be tested in accordance
with ASTM/DIN-ISO standards and the
thermal conductivity as per IS standards. The
window comprising of uPVC extruded glazing
beads of appropriate dimension, EPDM
gasket, G.I fasteners 100 x 8 mm size for
fixing frame to finished wall, plastic packers,
plastic caps and necessary stainless steel
screws etc. After fixing frame the gap
between frame and adjacent finished wall
shall be filled with weather proof silicon
sealant over backer rod of required size. The
sash will be fitted with 5mm clear glass ( float
).complete in all respect as per specification
and direction of the Engineer in Charge. etc.
Supplying and Fixing of M.S. Grills,
M.S.Doors, M.S. Gate etc including
cost,conveyance of all materials,priming,and
60 59 labour for fitting fixing etc.complete as per the 0 0.00 0.00 0.00
instruction of Engineer-in-Charge
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Priming one coat with wall cement primer
(water bound) to make an even finished
surface in all floors and heights to wall
surface of approved make and shade
including sand papering, applying putty
63 62 wherever necessary & cost of scaffolding, 0 0.00 0.00 0.00
staging charges with cost, conveyance, taxes
of all materials, cost of all labour,labour cess
T&P etc. complete as per the direction of the
Engineer-in-charge.
Painting two coats with approved anti-fungal
weather seal paints (ISI) of approved colour,
shade on wall surface over a coat of wall
primer(ISI) water bound including sand
papering, polishing the surface, cost,
conveyances of all materials and cost of all
labour,labour cess with T&P etc, complete as
per specification & direction of Engineer-in-
Finishing plastered surfaces of walls with
cement based wall putty (Water based) of
approved make and finishing the surface
smooth and even by sand papering to receive
painting in walls, at all heights with staging
69 68 wherever necessary with cost, conveyance, 0 0.00 0.00 0.00
taxes of all materials, cost of all
labour,labourcess, all T&P etc. required for
the work complete in all respect as per the
direction of the Engineer-in-charge.
Painting two coats with approved plastic
emulsion paint over a coat of wall primer of
make Dulux / Berger / Asian to inside surface
of walls finished with Acrylic Wall putty (water
based) of make (Birla / JK) and finished
smooth & even surface to receive painting
using roller to the final coat including cost of
72 71 scaffolding staging charges with cost, 0 0.00 0.00 0.00
conveyances, taxes of all materials, cost of
labour, T&P required for the work etc.
complete for all floors as per specification &
direction of the Engineer-in-charge.
Note :- Sample of Paint & Primer shall be
approved before procurement and use.
Painting two coats with approved Enamel
75 74 Paint on wood work over a coat of Wood 0 0.00 0.00 0.00
Primer in Ground Floor
Painting two coats with approved Enamel
Paint on Steel work in Ground Floor
79 78 Terrace floor Sqm 4.01 186.68 748.57
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting and fixing of Stainless steel
of 304 grade in hand ralling using 50mm dia
of 2mm thick circular pipe with Balustrade of
size 32mm X 32mm X 2mm @ 0.90mtr. C/C
and stainless square pipe bracing of size
80 79 32mm X 32mm X 2mm in 3 rows in stair case 0 0.00 0.00 0.00
as per approved design and specification,
buffing, polishing etc with cost, conveyance,
taxes, all materials, labour, T&P etc. required
for the complete in all respect.
367 366 Sub-Total of Civil Works 0 0.00 0.00 79,45,283.27
368 0 Plumbing Works 0 0.00 0.00 0.00
Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC) pipes conforming to
IS:15778, having thermal stability for hot &
cold water supply, including all CPVC plain &
brass threaded fittings including fixing the
pipe with clamps at 1.00 m spacing. This
includes jointing of pipes & fittings with one
step CPVC solvent cement and testing of
joints complete as per direction of Engineer-
370 2 20mm dia PVC ASTM pipe (sch-80) Mtrs. 30.00 291.81 8,754.42
371 3 25mm dia PVC ASTM pipe (sch-80) Mtrs. 40.00 396.01 15,840.32
Supplying all materials, labour, T&P and
providing and fixing to wall or ceiling and floor
GI/PVC pipes, class-IV (10 k.g. F/cm) on
firming I.S.4985 of the following nominal bore,
372 4 tube fittings and clamps including making 0 0.00 0.00 0.00
good the wall, ceiling and floor, testing all
complete as per specification and direction of
the Engineer in charge.
373 5 32mm dia PVC ASTM pipe (sch-80) Mtrs. 45.00 294.76 13,264.38
374 6 40mm dia PVC ASTM pipe (sch-80) Mtrs. 30.00 387.39 11,621.82
Supplying all materials, labour T&P and fitting
and fixing brass/CP fittings of the following
nominal bore with supply of all joiniting
materials including cost & conveyance of all
materials to worksite, payment of taxes etc.
all complete as per P.H specification and
direction of the Engineer-in-charge.
15mm dia CP angle stop cock (Con-CHR-
053KN Jaquar make)
15mm dia CP two in one bib cock (Con-CHR-
041KN Jaquar make)
15 mm dia CP S.B. Bib cock(CON-CHR-
15mm dia CP Long Body Bib cock (Con-CHR-
107KN Jaquar make)
20mm dia CP consealed stop cock(Con-CHR-
083KN Jaquar make)
25mm dia brass full way valve (Shakti make)
32mm dia brass full way valve (Shakti make)
40mm dia brass full way valve (Shakti make)
15mm dia CP Health faucet (Con-ALD-MCH-
573 Jaquar make)
385 17 15mm CP Extension piece Each 20.00 69.97 1,399.48
387 19 15mm size C.P. flange Each 20.00 47.55 951.08
388 20 25mm size brass ball cock with ball Each 2.00 1092.80 2,185.60
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials , labour, T&P and
fixing rotational moulded polyethylene
cylindrical vertical water storage tanks
conforming to IS:12701/1996 including
cutting holes through the tank and fixing mild
steel tubes and fittings and providing extra
sockets and jam nuts, fixing ball valve etc.
including hoisting upto a height of 5 metres
above ground level and placing the tank to
the required position and providing 5.40 mtr.
lengthx0.25 mtr width KB brickwork in
cement mortar (1:6) of 0.46m height in
staging and 0.13mtr thick circular protection
wall of 0.46mtr height to support the
389 21 tank,12mm thick cement plaster in cement 0 0.00 0.00 0.00
mortar (1:6) over brick work, RCC slab of size
1.60mX1.60m and 0.10m thick ,RCC beam of
0.25mx0.30m and 3.40m average length in
cement concrete (1:2:4) using 12mm size
crusher broken hard black granite chips and
required steel reinforcement including
centering and shuttering,watering,curing ,cost
of all materials,conveyance of all materials to
worksite , payment of royalty, all taxes etc.all
complete as per approved drawing , P.H.
specification and direction of Engineer-in-
1000 liters capacity PVC water storage tank
supplying all materials, labour, T&P and
cutting holes through existing brick work
including making good the damages in
cement mortar (1:4) for taking G.I. Pipes and
fittings/ P.V.C. pipes and fittings including
watering, curing, cost & conveyance of all
materials to worksite, payment of royality,
taxes etc. all complete as per direction of
Engineer-in-charge.
Supplying all materials , labour, T&P and
cutting holes in RCC floors and roofs upto
19cm thick for passing P.V.C pipes and G.I
fittings etc. , and repairing the holes after
392 24 insertion of pipe etc. with cement concrete Each 4.00 198.12 792.49
(1:2:4) including finishing complete so as to
make it leak-proof as per P.H. specification
and direction of Engineer-in-charge
Supplying all materials, labour, T&P and
cutting grooves in pucca floors and walls for
taking G.I./P.V.C. pipes and making good the
damages including watering , curing , cost &
conveyance of all materials to worksite,
payment of royality, taxes etc all complete as
per direction of the Engineer-in-charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
fitting and fixing U-PVC SWR soil waste
ventilating pipes and fittings of the following
outside diameter conforming to ISI No
13592/1992 to walls with nails, bobbins and
wooden plugs or laying in trenches including
jointing with supply of approved rubber
394 26 lubricant by non-heat application method/as 0 0.00 0.00 0.00
per manufacturer's specification, testing,
earthwork in excavation in all kinds of soil and
refilling of trenches , cost & conveyance of all
materials to worksite, payment of taxes etc.
all complete as per P.H specification and
direction of the Engineer-in-charge.
110mm U-PVC SWR Pipe (Ori
Plast/Finolex/Supreme Make Type-B)
110mm U-PVC ‘P’ Trap(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC door bend(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Plain bend(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC offset without ear(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Cowl(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC S/Jn door(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Plain tee(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC D/Jn door(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Door tee(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Socket(Ori
Plast/Finolex/Supreme Make)
Supplying all materials, labour, T&P and
fixing vitreous china water closet, squatting
pan (Indian type W.C pan/Orissa pattern
squatting pan) duly embedded in cement
concrete (1:5:10) using 4cm size hard granite
metal including fixing a pair of vitreous china
250mm x 130mm x30mm footrest, fixing
100mm dia HCI 'p' or 's' trap (with/without
406 38 50mm dia horn) for water colset squatting 0 0.00 0.00 0.00
pan including jointing the trap with pan in
cement mortar (1:1) cutting the floor and
mending good the damages , cost &
conveyance of all materials to worksite,
payment of royality , taxes etc. all complete
as per P.H specification and direction of the
Engineer-in-charge.
580mm size Orissa pan
(Hindware/Parryware/Neycer make)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour T&P and and
fixing 12.50 liters/10 liters capacity low level
flushing cistern with a pair of cast iron or M.S.
brackets complete with fittings such as
siphonic arrangements 15mm nominal size
brass/pvc ball valve with polythene float CP
brass handle,unions and couplings for
connection with inlet, outlet and overflow
pipes, 32mm dia CP long flush bend, 15mm
408 40 dia pvc inlet connection pipe including cutting 0 0.00 0.00 0.00
holes and making good the same and
connecting the flush bend with cistern and
closet and connceting the inlet pipe with
suupply main , cost & conveyance of all
materials to worksite, payment of taxes etc.
all complete as per P.H specification and
direction of the Engineer-in-charge
10 ltr. Capacity pvc L.L. cistern with 32mm.
409 41 Dia CP long flush bend ( Slimline-white- Each 5.00 1868.53 9,342.65
Parryware make )
Supplying all materials,labour,T&P and fixing
Flat back lipped wall (Mini stall urinal -
630mmx180mm) urinal of the following sizes
including connecting the urinal with 32mm.
dia pvc waste pipe 910mm. long by means of
white lead mixed with chopped hemp, fixing
32mm. dia CP dome waste, 15mm. dia CP
spreader including cutting holes in walls and
making good the damages with supply of
wooden plugs, screws and cement etc. all
complete as per specification and direction of
the Engineer in charge Half stall urinal
Supplying all materials, labour, T&P and
fixing the following vitreous china Wash Down
Water Closet(European type W.C. pan)with
integral 'p' or 's' trap to the floor with wooden
plug and chromium plated pedestal screws
including jointing the trap with soil pipe in
cement mortar (1:1) fixing plastic seat and
411 43 cover for wash down water closet with 0 0.00 0.00 0.00
chromium plated brass hinges and rubber
buffers including polishing , cost &
conveyance of all materials to worksite,
payment of royality, taxes etc. all complete
as per P.H specification and direction of the
Engineer-in-charge
European water closet with 'p' trap
plain(Hindware/Parryware/Neycer make)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour T&P and fixing
wash basins with hole for pillar taps with cast
iron or M.S.brackets painted white including
cutting holes in walls and making good the
damages with supply of wooden plugs,
screws and cement etc, fixing pedestal for
wash basin recessed at the back for the
reception of pipes and fittings, fixing PVC
waste pipe of 32mm nominal diameter for
wash basin including brass check nut
complete, fixing pillar taps capstan head
screw down high pressure lettered 'Hot' and
'Cold' with long screws, shanks and back nuts
of 15mm dia nominal bore, fixing 15mm dia
PVC inlet connection pipe and making
connection with pillar cocks and supply mains
for wash basin, fixing 32mm dia CP brass
waste, cost & conveyance of all materials to
worksite, payment of taxes etc. all complete
as perP.H specification and direction of the
Engineer-in-charge
550mmx400mm W.H.basin
(Hindware/Parryware/Neycer make)with
414 46 15mm dia C.P.pillar cock (Plaza make) with Each 5.00 4656.52 23,282.58
Supplying all materials, labour, T&P and
fixing standard sized CP towel rail complete
with CP brass brackets fixed to wooden plugs
with CP screws as per specification and
direction of the Engineer in charge
416 48 25mmx600mm long CP towel rail Each 1.00 832.96 832.96
Supplying all materials, labour, T&P and
fixing standard sized glass-shelf with CP
brass brackets and guard rail complete fixed
to wooden plugs with CP screws as per
specification and direction of Engineer in
600mmx125mm plate glass shelf with CP/NP
Supplying all materials, labour, T&P and
fixing mirror of superior glass mounted on
6mm.thick A.C. sheet or ply wood sheet and
420 52 fixed to wooden plugs with CP screws and 0 0.00 0.00 0.00
washers complete as per specification and
direction of Engineer in charge.
600mmx450mm size B.E mirror (swivelled
Supplying all materials, labour, T&P and
fixing CP soap holder complete with CP brass
422 54 brackets fixed to wooden plugs with CP 0 0.00 0.00 0.00
screws as per specification and direction of
the Engineer in charge
Supplying all materials labor T&P & Fitting &
fixing CP shower with rim with supply of red
lead and yarn nail complete as per direction
of Engineer in charge.
425 57 ½” x 5” CP Shower (Plaza Deluxe Make) Each 1.00 572.77 572.77
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials , labour, T&P and
cutting holes through existing brick or laterite
masonry wall for taking U-PVC pipes and
426 58 fittings including making good the damages Each 12.00 232.11 2,785.27
etc. all complete as per P.H. specification and
direction of Engineer-in-charge
Supplying all materials , labour, T&P and
cutting of RCC chajja for taking HCI or U-
PVC pipe and fittings including making good
the damages etc. all complete as per P.H.
specification and direction of Engineer-in-
Supplying all materials ,labour ,T&P and
constructing Inspection Chamber of inside
size 760mmx760mmx460mm with cement
concrete (1:3:6) using 40mm size crusher
broken hard black granite metal on bed , KB
brick work in cement mortar (1:6) in
foundation and plinth, moulding and shaping
the channel inside and benching with cement
concrete (1:2:4) using 12mm size crusher
broken hard black granite chips, 12mm thick
cement plaster (1:3) with cement punning to
inside, cement flush pointing (1:3) to outside,
R.C.C cover slab (1:2:4) using 12mm size
crusher broken hard black granite chips with
R.C.C man hole cover, earth work in
excavation in all kinds of soil and refilling the
cavity around the chamber including
watering,curing,cost of all materials,
conveyance of all materials to worksite,
payment of royalty,all taxes etc.all complete
as per approved drawing, P.H specification
and direction of Engineer-in-charge
Inside size 76cmx76cmx46cm with 18” dia
Supplying all materials ,labour ,T&P and
constructing gully trap chamber of inside size
250mmx250mm with 8cm thick RCC precast
cover slab in cement concrete (1:2:4) mix
using 12mm size crusher broken HG chips,
foundation concrete (1:4:8) using 40mm size
crusher broken HG metal on bed and around
trap, KB brick work in cement mortar (1:6) in
foundation and plinth and inside 12mm thick
cement plastering (1:3) finished with a
floating coat of neat cement including fixing
100mmx100mm size HCI gully trap,
150mmX150mm size CI grating etc.all
complete as per drawing, specification and
direction of Engineer-in-charge
Supplying all materials labour T&P filling sand
in lavatories well watered and rammed
including lead of materials to work site.21.70
Supplying all materials, labour, T&P and
providing cement concrete ( 1:4:8 ) with 4cm
size crusher broken hard granite metal
including watering, curing, cost of all
432 64 materials,conveyance of all materials to work Cum 2.17 5831.32 12,653.97
site with payment of royalty, all taxes etc all
complete as per P.W.D specification and
direction of Engineer-in-charge 21.70 * 0.10
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing cement concrete ( 1:2:4 ) with
12mm size crusher broken hard black granite
chips including watering, curing,cost of all
433 65 materials, conveyance of all materials to work Cum 2.17 7921.58 17,189.82
site with payment of royalty, all taxes etc all
complete as per P.W.D specification and
direction of Engineer-in-charge 21.70 * 0.10
Supplying all materials, labour, T&P and
providing and fixing ceramic tiles in floors,
treads or steps and landing on 25mm thick
bed of cement mortar (1:1) ( 1 cement : 1
sand ) jointed with neat cement slurry mixed
with pigment to match the shades of the tiles
including watering, curing,cost of all
materials, conveyance of all materials to work
site , payment of royalty, all taxes etc all
complete as per P.W.D specification and
direction of Engineer-in-charge ( ceramic
floor tiles of premium grade having thickness
7mm to 8mm conforming to IS 13755 of size
Kajaria/Somany/Johnson tile 60cmx60cm
special printed series to be pre-approved by
the Engineer-in-charge )
Kajaria/Somany/Johnson tile 60cmx60cm
Supplying all materials,labour,T&P and
providing 12mm thick cement plaster(1:4) on
brick work including watering,curing,cost of all
materials, conveyance of all materials to
worksite,payment of royalty,all taxes etc.all
complete as per PWD specification and
direction of the Engineer-in-charge.
Supplying all materials, labour, T&P and
providing and fixing porcelain glazed tiles in
dado skirting on 12mm thick cement plaster
(1:3) jointed with neat cement slurry mixed
with pigment to match the shades of the tiles
including watering, curing,cost of all
materials, conveyance of all materials to work
site , payment of royalty, all taxes etc all
complete as per P.W.D specification and
direction of Engineer-in-charge( ceramic wall
tiles of premium grade having thickness
6.5mm to 6.7mm conforming to IS 13753 of
size Kajaria/Somany/Johnson tile
60cmx30cm special plain / printed series to
be pre-approved by the Engineer-in-charge )
Kajaria/Somany/Johnson tile 60cmx30cm
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Factory made single leaf rigid FRP(alternately
called GRP) sanwhch composite door shutter
of 32mm thick laminated ith two GRP skins
with wood grain finish fabricated using UV-
stabilised Isothealica Gelcoat and one layer
of 450 gsm E-glass chopped starand mat
(CSM) impregnated with orthopthalic
palyester resin. The thikness of the skins
shall not be less that 1.50mm expanded
polyestyrone(EPS) stuctural foam panel of 29
mm thickness and a density of 20Kg/cu.mtr
shall be used as core material .Wooden
reinforcements made of seasoned sal wood
reinforements for fitting the metal fittings such
as tower bolts ,aldrops,handles etc. shall be
provided .A Strictira; adehsive compatible
with(EPS) foam shall be used for bending the
core material,the sal wood reiforcements and
the skins.The materials and process for
manufacturing the door shutters shall
conform to RC-TIFAC composites Design
centre's standars and specifications and the
door shutters tested in conformation to
IS:40250-1998.The finish of door shutter will
be plain colour white/Lvory/beige/Light
grey/Mahogany/Teak wood of any other
colour using high quality pigments .Three
heavy whight mild steel butt hinges typpe-
I(ISI-marked) size 100 mm are to be fitted on
one side of shutter. 7 x 2.13 x 0.76
Factory made FRP (alternately called GRP)
door frame of sixe75mmX100 mm fabricated
using E-Glass chopped strand Mat(CSM) U.V
stabilised inopthalic Gelcoat and impregnated
with inopthalic resin.The thickness of the
GRP sikns shall no be less that 2.00 mm
.The door frame consist of foru segments
which are provided with plug-in-socket
arrangement in-site in the ,ould .The
segments are plugged in and are joined
together by means of screw . The GRP frame
shall be provided with wooedn rainforcement
of six locations for high screw holding
capacity for fixing metallic hold fast and shall
be consolidated by filling with medium destity
foam/Plaster of paris with fibre
reinforcement,Six numbers of 260mm X
25mm X 5 mm size 'S' shaped M.S flat hold
fast shall be provided with the frame .The
material and process for manufacturing the
door frames shall conform to RV-TIFAC
composites Design centre's stanards and
specifications.The finish of door rrame will be
plain colour white/Lvory/Beige/Light grey
Golden brown Mahogany/Teak wood sand
stone/Champagne /Pastel blue or any other
colour using high quality pigments cimplete in
all respect as per specification and direction
of the Engineer in Charge. 5.02 x 7
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing fitting and fixing (Aqua guard) pure
chill 80 PSS UV of size 750 x 570 x 1350mm
hight with water storage capacity 80 liter's
along with 2 noa of faucets 1 for cold water
and 1 for normal water including a flow of 1.5
ltr per munite etc all complete as per
approved drawing , specification and direction
of the Engineer in charge
452 84 Aqua guard pure Chill 80 PSS UV Each 1.00 102635.22 1,02,635.22
Supplying all materials, labour, T&P and
laying in trenches (to level or slope)
unplasticized P.V.C. pipe conforming to IS
4985/2000 of the following out side dia for
class- 3 (0.60mpa ) including jointing with
supply of approved solvent cement by non-
heat application method/as per manufacture's
454 86 specification, provoding and laying in trench 0 0.00 0.00 0.00
cement concrete (1:4:8) with 40mm size hard
granite metal in the type C-1 standard
bedding surrounding or encasing including
concrete for bedding and curing etc all
complete as per P.H. specification and
direction of the Engineer in charge
Supplying all materials labor T&P and
constructing MH chamber of sizes earth work
in excavation in all kinds of soil CC(1:1:8)
with black granite chips size 46mm brick work
with K.B. brick having crossing strength not
less than 75 Kg /CM2 to 90 Kg/CM2s in
CM(1:6)12mm C.P(1:8) inside MH chamber
over benching with cement slush pointing
(1:3)outside the MH chamber providing
457 89 painting MS or CI step iron RCC(roof of slab 0 0.00 0.00 0.00
with CC(1:2:4)with black granite chips size
12mm bending binding tying the grills placing
of the reinforcement providing RCC color of
required size refilling the cavity around the
MH chamber with excavated earth including
channeling the bed of MH etc all complete as
per PH specification.
MH size 0.91m x 0.91 m with 0.45 m (18” dia
Supplying all materials labour T&P and
constructing 1.80m dia x 2.60 m deep soak
way pit with dry brick having crossing strength
not less than 75Kg/CM2 to 99Kg/CM2 in
CM(1:6) for the remaining 0.4572mm height
of wall at top CC(1:3)inside and outside
inside fill with dry brick khoa size 38mm ,CM
thick RCC perforated slab to a height of
1.9012m from bottom covered by means of
50mmthick RCC wall cover in pieces filled
with iron plugs including earth work in
excavation refilling of cavity around the pit
and painting the iron works complete as per
PHD design and specification including
carriage of all materials to site.
460 92 1 no 30 Users Septic tank 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Earth work in excavation of foundation in all
kinds of soil within 50m initial lead and 1.5m
initial lift including rough dressing & breaking
461 93 clods to maximum 5cm to 7cm and laying in 0 0.00 0.00 0.00
layers not exceeding 0.30m in depth and as
per direction of the Engineer-in-Charge.
Extra lifts of 1.50 mtr or part thereof over the
initial lift of 1.5 mtr in all kinds of
embankments and road works and ordinary
earthwork in general.
Supplying all materials, labour, T&P and
providing cement concrete (1:3:6) with 4cm
size hard granite metal including watering,
curing, conveyance of all materials to
worksite, payment of royalty, taxes etc all
complete as per specification and direction of
the Engineer in charge
Supplying all materials, labour, T&P and
providing cement concrete (1:2:4) with 12m
size hard broken granite chips including
watering, curing, conveyance of all materials
to worksite, payment of royalty, taxes etc all
complete as per specification and direction of
the Engineer in charge
Supplying all materials, labour, T&P and
providing cement concrete (1:1½:3) with
12mm size crusher broken hard black granite
chips for RCC works including hoisting,
laying, watering, curing,cost of all materials,
conveyance of all materials to worksite,
payment of royalty,all taxes etc. all complete
as per PWD specification and direction of the
Engineer in charge.
Supplying all materials, labour, T&P and
providing steel reinforcement of Fe-415 /Fe-
500 grade for RCC work including
cutting,bending,binding and tying the grills
and placing in position including cost of
binding wire 18 to 20 gauge,cost of steel,
conveyance of all materials to worksite,
payment of royalty,all taxes etc all complete
as per PWD specification and direction of the
Engineer-in-charge.
Supplying all materials, labour, T&P and
providing rigid & smooth centering and
shuttering for RCC works including false work
and dismantling them after casting including
conveyance of all materials to worksite,
payment of royalty, taxes etc. all complete as
per specification and direction of the
Engineer-in-charge
RCC floor, roof slab chhaja up to 4.430 m
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials.labour.T&P and
providing brick work in foundation and plinth
with KB bricks having curshing strength not
less than 75 kg/sqcm with dimensional
tolerance+ 8% in cement mortar ( 1:3 )
479 111 including watering,curing,cost of all 0 0.00 0.00 0.00
materials,conveyance of all materials to
worksite,payment of royalty,all taxes etc.all
complete as per PWD specification and
direction of the Engineer in charge.
Supplying all materials,labour,T&P and
providing 12mm thick cement plaster(1:3) on
brick work including watering,curing,cost of all
materials, conveyance of all materials to
worksite,payment of royalty,all taxes etc.all
complete as per PWD specification and
direction of the Engineer-in-charge.
Supplying all materials, labour, T&P and
providing cement punning including watering,
curing, conveyance of all materials to
489 121 worksite, payment of royalty, taxes etc all sqm 16.17 39.18 633.48
complete as per specification and direction of
the Engineer in charge
Supplying all materials labour T&P and fitting
and fixing 12mm dia MS/CI step iron
490 122 including supply of necessary CC(1:2:4) for Each 5.00 324.26 1,621.32
fixing etc. complete as per PH specification.
Supplying all materials, labour T&P for
providing fitting & fixing 100mm x 100mm SW
Tee in wall including filling the recess with
cement concrete (1:2:4) with 12mm size HG
491 123 chips all complete including watering curing Each 2.00 466.10 932.20
conveyance of all materials to work site
payment of royalty all complete as per
specification and direction of Engineer in
Supplying all materials labor T&P filling sand
in foundation and plinth with well watered and
rammed etc all complete as per direction of
Engineer-in-charge.
Construction of 1nos production wells
including scientific source finding through
consolidated and unconsolidated rock with
down the hammer drilling rig or combination
rig with PVC pipe and installation of
submersible pump set with all acessories
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Labour for drilling a perfectly vertical bore
hole of specified dia for a specified depth
below ground level through consolidated and
unconsolidated rock with down the hole
hammer drilling rig or combination rig as
required to suit the site condition as per the
direction of the Engineer in charge including
use of own rig with its accessories, tools and
plant and consumables etc for lowering of
200mm/150mm dia G.I/P.V.C/M.S casing
pipes for housing fitted with socket and with
497 129 or without well screen as per the necessity for 0 0.00 0.00 0.00
soft, medium, hard and boulder formation
(G.I/ P.V.C/ M.S casing pipes if required to
prevent collapse of overburden is to be
provided by the contractor including lowering
and withdrawing after completion of the tube
well), 200mm dia to 400mm dia in
overburden portion including packing of
gravel supplied by the contractor for 400mm
498 130 Drilling of 200mm dia bore 0 0.00 0.00 0.00
501 133 Drilling of 150mm dia bore 0 0.00 0.00 0.00
Lowering the following size of G.I/P.V.C/M.S
housing pipes with or without slotted pipes as
per the necessity from ground level up to
45.00m depth and fitted and fixed up in
perfectly vertical position including cutting
and threading of pipes and slotted pipes and
supplying and fixing all jointing materials,
tools and plant etc all complete and keeping
the top of casing pipe threaded including
plugging tube wells to prevent entry of foreign
Lowering of 200mm dia P.V.C casing pipes
Supplying polyvinyl chloride pipes as per
ASTM-D-1785-89 having threads in
accordance with DIN 2999 part-1/DIN-42225
part-II specification length of pipe (laying
length) will be 3 mtrs. The pipes shall be
supplied with both external and threaded with
free socket. The pipe having external thread
at one end i.e female and or belled end. The
female end having internal thread is to be
507 139 belled in order to accept the male end while 0 0.00 0.00 0.00
jointing pipes with a bore threading shall be
provided with a greave at the roof of the male
thread accomodate flexible PVC/Rubber 'O'
ring to make the joint water tight colour of the
pipe shall be blue. The name of the
manufacture along with batch No class of
pipe shall be stranded legibly of each pipe
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing and providing sanitary sealing by
cement concrete grouting of annular space
around GI/PVC/MS housing pipe upto 5m
below ground level (as per drawing) to plug
the bore hole excluding cost of cement all
509 141 complete as per direction of the Engineer in Each 1.00 931.96 931.96
charge. Minimum one metre of casing pipe to
be inserted in the bore into the rock at the
bottom to ensure sanitary sealing (excluding
cost of cement which will be supplied directly
by the department)
Cleaning and developing the tube well with
supply of compressor worked till clear and
adequate discharge is obtained from the tube
well including supply and use of all necessary
equipment and labour as per direction of the
Engineer in charge
Supplying all materials, equipment, labour &
conducting reconnaissance survey,
integrated Hydrological and Geophysical
(Electrical Resistivity Method) survey &
selection of potential source for exploration of
Ground Water including selection and
recommendation of site for drilling wells in
selected locations in any part of Orissa under
the following Geological formation:
Rocky terrain with boulder formation for 300m
Supplying all materials, labour, T&P and
providing, fitting and fixing submersible pump
with squirrel cage induction type submersible
type submersible electric motor to run on 3
phase/1 phase line voltage ranging from 320
volt to 450 volt conforming to IS: 8034/89 with
following specifications with suitable control
panel, jointing with GI/PVC/HDPE pipes,
electrification, testing, commissioning, trial
running, conveyance of all materials to
worksite, payment of taxes etc all complete
as per specification and direction of the
Engineer in charge (Texmo/Crompton
Greaves/Kirloskar make)
1 H.P. Single phase/ three phase 3 stage
head renge of 20 to 35 mtr with discharge
515 147 capasity 145 to 110 L.P.M With outlet dia 25 Each 1.00 19749.90 19,749.90
mm (keeping 100% standby)
516 148 DOL Control panel Each 1.00 4490.49 4,490.49
517 149 40mm dia steel short piece Each 1.00 179.71 179.71
519 151 50mm size CI bracket Pair 1.00 107.73 107.73
521 153 20mm dia rigid UPVC pipes Mtr 30.00 8.14 244.26
522 154 Steel rope with cover Mtr 30.00 31.51 945.18
Labour charges for lowering including
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing and fixing to wall or ceiling and floor
HDPE pipes and pipe fittings conforming to
IS: 4984/2000 (10kgf/sqcm) of the following
nominal bore with clamps and jointing by
Fusion welding method including testing,
making good the wall, ceiling and floor all
complete as per specification and direction of
the Engineer in charge
32mm HDPE pipes (Finolex/Supreme make)
526 0 Sub-Total of Plumbing Works 0 0.00 0.00 12,12,904.43
527 0 Electrical Works 0 0.00 0.00 0.00
528 1 Sub-Head I (modular Wiring Items) 0 0.00 0.00 0.00
Point wiring in Recessed wirring to light
point/ fan point/ exhaust fan point/ call bell
point with 1.5 sq.mm FRLSH/LSZH PVC
insulated copper conductor of ISI marked, 20
mm dia PVC flexible non metallic conduit
FRLS type ISI marked, switch ISI marked ,
and ceiling rose ISI marked, of modular type
529 2 G.I box with metallic cover plate (both side) 0 0.00 0.00 0.00
falme retradant type) , of suitable size,
modular box with 1.5 sq. Mm FRLS PVC
insulated single core multistandard copper
conductor as earth wire including all
accessories and connection as per direction
Group control of point in Recessed wirring to
light point/ fan point/ exhaust fan point/ call
bell point with 1.5 sq.mm FRLSH/LSZH PVC
insulated copper conductor of ISI marked, 20
mm dia PVC flexible non metallic conduit
FRLS type ISI marked, with 6A modular
type(( falme retradant type)) switch ISI
marked, and ceiling rose ISI marked, of
modular type G.I box with metallic cover
plate (both side) falme retradant type), of
suitable size, modular box with 1.5 sq. Mm
FRLS PVC insulated single core
multistandard copper conductor as earth wire
533 6 including all accessories and connection as Nos 12.00 1234.28 14,811.36
per direction of Engineer -in -Charge.
CATAGORY AS FOLLOWS ,complete
suitable for Office.(Maximum 02 nos point in
one circuit).All the switches & sockets should
be warrantied for a replacement period of 10
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free after sales service within
warranty period for acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying ,fixing of 6A Plug on the same
board in existing switch board with complete
fitting by 01 no of 6A switch & socket
(modular type)( ( falme retradant type)) &
other required accessories of ISI marked as
approved as per direction of Engg. -in -
Charge. Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision) or equievalant
reputed make & model A catagory ISI marked
as approved, complete suitable for for
HOSTEL.(Maximum 02 nos point in one
circuit).All the switches & sockets should be
warrantied for a replacement period of 10
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within warranty
period for acceptance of materials.
Supplying,fixing of 6A Plug on the separate
board with complete fitting by 01 no of 6A
switch & socket(modular type)( ( falme
retradant type)) with suitable size modular
box & cover( falme retradant type) including
supplying of all required accessories of ISI
marked as approved as per direction of engg-
in-charge..Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision) or equievalant
make & model ISI marked as approved ,
complete suitable for Residence.(Maximum
02 nos point in one circuit).All the switches &
535 8 sockets should be warrantied for a period of Nos 14.00 604.16 8,458.24
10 years against manufacturing defects
against which ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free aftersales service within warranty period
for acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying,fixing of 1x16A Plug on the
separate board with complete fitting by 01 no
of 16A switch & socket(modular type)( falme
retradant type)) with suitable size modular
box & cover( falme retradant type) including
supplying of all required accessories of ISI
marked as approved as per direction of engg-
in-charge.. Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision)or equievalant reputed
make A catagory ISI marked as approved,
(For equipement power)All the switches &
sockets should be warrantied for a
replacement period of 10 years against
defects with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Receass wiring for circuit/submain wiring with
the following mentioned size PVC
FRLSH/LSZH insulated, copper conductor,
single core cable (Finolex/Anchor/Polycab/
HAVELLS/RR KEBLE) or equievalant reputed
make A catagory ISI marked as approved, in
recessed PVC conduit Heavy duty FRLS of
mentioned size (AKG/Anchor/Kinjal or
537 10 equievalant ISI marked as approved) as 0 0.00 0.00 0.00
required as per direction of Engg.-in-Charge.
Ncessary test report & Warrnaty certificate to
be submitted to the department for genuinity
of product & to avail free after sales service
within warranty
period for acceptance of materials
2 nos single core 1.5 sq. mm copper wire for
phase and neutral and 01 no of single core
1.5 sq. mm copper wire for earth continuty
conductor. In 20 mm dia non metallic heavy
duty flexible conduit (LDB to LSB/LIGHT
2 nos single core 2.5 sq. mm copper wire for
phase and neutral and 01 no of single core
1.5 sq. mm copper wire for earth continuty
conductor in 20 mm dia non metallic
539 12 heavy duty flexible conduit.(BDB to Mtr 211.00 174.64 36,849.04
LSB/LIGHT CKT/5A PLUG/INVERTER
POINT TO EACH QTR) (2X2.5+1X1.5)
4 nos single core 2.5 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
540541 13 conductor .in 25 mm dia non metallic Mtr 155.00 312.70 48,468.50
heavy duty flexible conduit(LDB to LSB/5A
SOCKET) (4X2.5+2X2.5)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
2 nos single core 4 sq. mm copper wire for
phase and neutral and 01 no of single core
1.5 sq. mm copper wire for earth continuty
conductor in 20 mm dia non metallic heavy
542 14 duty flexible conduit .(PDB to PSB/ GAYSER Mtr 25.00 194.70 4,867.50
POINT/AC POINT/ROOM LIGHT CONTROL
TO CORRIDOOR POINT/DG PANEL
ESSENTIAL LOAD) (2X4+1X1.5)
4 nos single core 4 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
conductor in 32 mm dia non metallic heavy
543 15 duty flexible conduit.(PDB to PSB/GAYSER. Mtr 25.00 292.64 7,316.00
POINT/AC POINT/DG PANEL ACCL TO
EACH QTR ESSENTIAL LOAD)
2 nos single core 6 sq. mm copper wire for
phase and neutral and 01 no of single core
2.5 sq. mm copper wire for earth continuty
544 16 conductor in 25 mm dia non metallic heavy Mtr 16.00 231.28 3,700.48
duty flexible conduit .(LFDB TO LBDB)
4 nos single core 6 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
545 17 conductor in 32 mm dia non metallic Mtr 15.00 346.92 5,203.80
heavy duty flexible conduit.(LFDB TO
LBDB/power unit/point) (4X6+2X2.5)
4 nos single core 10 sq. mm copper wire for
phase and neutral and 02 nos of single core
4 sq. mm copper wire for
546 18 earth continuty conductorin 32 mm dia non Mtr 15.00 496.78 7,451.70
metallic heavy duty flexible conduit .(LFDB
TO FLOOR PANEL TO TPN
Supplying and fixing 20 amps, 240 volts,
SPN, industrial type socket outlet, with 2 pole
and earth metal enclosed plug top along with
32 amps. C-series, SP MCB, in sheet steel
enclosure, on surface or in recess, with
chained metal cover for the socket outlet, and
complete with connections, testing and
commissioning etc. as required as per
direction of Engg.-in- Charge.. . Make-
Legrand/Schneider/Siemens/panasonic or
equievalant reputed make & model A
547 19 catagory ISI marked as approved,All the Nos 5.00 733.96 3,669.80
Components should be warrantied for a
replacement period of 5 years against
defects with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing following size/ modules,
GI box along with modular base & metallic
cover plate (both side) plate for modular
switches in recess etc as
required as per direction of
Engg.-in-Charge. MAKE-
Legrand/Siemens/Anchor/Panasonic/
Schneider or equievalant reputed make &
model A catagory ISI marked as approved
.All the Components should be warrantied
for a replacement period of 5 years
against defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free aftersales service within warranty period
for acceptance of materials.
Supplying and fixing of following sizes of
medium class PVC FRLS conduit ISI
marked along with accessories in
surface/recess including cutting the wall
and making good the same in case of
recessed conduit as required as per
direction of Engg.-in-Charge .MAKE
KINJAL/ AKG/Anchor or equievalant
reputed make A catagory ISI marked as
Supply and fixing modular type
indicator on the existing switch
box/cover . Equievalant higher model
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make &
model A catagory ISI marked as approved
as required as per direction of Engg.-in-
555 27 Charge.All the Components should be Nos 8.00 127.44 1,019.52
warrantied for a replacement period of 5
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within warranty
period for acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and installation of
AC starter Modular type,
Equievalant higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model
A catagory ISI marked as approved coil
voltage-415 Volt A.C. & O/L range of 9-
14A range on mod Box of suitable size
including modular coveras required as per
556 28 direction of Engg.-in-Charge .All the Nos 5.00 731.60 3,658.00
Components should be warrantied for a
replacement period of 5 years against
defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
Supply and fixing CALL bell (Ding dong
type) /Buzzer on the existing switch
box/cover. Equievalant higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model
A catagory ISI marked as approved .as
required as per direction of Engg.-in-
Charge.All the Components should be
warrantied for a replacement period of 5
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within warranty
period for acceptance of materials.
S/F of Bakelite angle holder/batten holder
(make-Anchor/Havells/Panasonic or
equievalant reputed make A catagory ISI
marked as approved )of ISI marked
conforming to IS-1258/1987 in place of
ceiling rose as per direction of Engg.-in-
Charge .All the Components should be
558 30 warrantied for a replacement period of 5 each 12.00 73.16 877.92
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within warranty
period for acceptance of materials.
Supplying,fixing of Blanking plate(modular
type)( falme retradant type)) in existing
switch box(anti bactorial & falme retradant
type) including supplying of all required
accessories of ISI marked as approved as
per direction of engg-in- charge. complete
suitable for IPH standard hospital.It should
be warrantied for a period of 10 years
559 31 against manufacturing defects against which Nos 12.00 49.56 594.72
ncessary test report & Warrnaty certificate to
be submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
560 32 Sub-Head II (Light fitting Fixture & Fan) 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying, installation, of exhaust fan of
heavy duty 300 mm sweep (Make-
Equievalant higher model with 5 star rated of
Havells/almonard/Anchor/Panasonic/Usha/Ha
lonix or equievalant reputed make & model A
catagory ISI marked as approved ) of
561 33 exhaust fan in the existing wall, including Nos 8.00 3693.40 29,547.20
fixing & conntection as required as per
direction of Engg.-in-Charge. Replacement
Warranty will be 5 years.
Supplying, installation, testing and
commssioning of 1400 mm sweep white/milky
colour ceiling fan Make-Equievalant higher
model with 5 star rated of
Havells/almonard/Anchor/Panasonic/Usha/Ha
lonix or equievalant reputed make & model A
catagory ISI marked as approved ) including
562 34 wiring the down rod of standard length (upto Nos 8.00 2616.06 20,928.48
30 cm) with 1.5 sq mm PVC insulated, copper
conductor, single core cable etc. as
required.(With fan Regulator) as required as
per direction of Engg.-in-
Charge.Replacement Warranty will be 5
Supplying, installation, testing and
commssioning of 1200 mm sweep
white/milky colour ceiling fan Make-
Equievalant higher model with 5 star rated
of Havells/almonard/Anchor/Panasonic/Usha
/Halonix or equievalant reputed make &
model A catagory ISI marked as approved )
563 35 including wiring the down rod of standard Nos 15.00 2514.58 37,718.70
length (upto 30 cm) with 1.5 sq mm PVC
insulated, copper conductor, single core
cable etc. as required as per direction of
Engg.-in- Charge,Replacement Warranty will
be 5 years.. .(With fan Regulator)
Supplying and fixing of Energy efficient
surface mounted square shape 18 W LED
luminaire of dimension of 225x 225 x 35 mm
consists of white powder coated , die-cast
Alluminium housing with high quality frosted
diffuser for glare-free uniform lighting
distribution with wattage not more than 20
watt and lumen output of 1500 lumens, , CRI
not less than 80,CCT of 6000 degree K,THD
less than 10%, with electronic driver, internal
surge protection of 2.5 KV , L70 B50: 30000
hrs (2 yrs warranty) and all other accessories
suitable for operation on 220 V to 240 V
supply as required as per direction of
Engg.-in-Charge. ( Make :
(Make: wipro LD80-171-60-XX-SM
or similar model of LT/Trilux
/Philips/Panasonic/HALONIX or equievalant
reputed make & model A catagory ISI marked
as approved).The luminaire should be
Replacement Warranty will be 5 years
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
SITC of energy efficient LED tube light fittings
with decorative alluminium batten and LED
tube light having power rating not more than
20 watt and lumen output not less than
2200 lumen complete with electronic
driver and all other accessories with
diffuser having 5 years warranty i/c
connection etc as required as per direction
of Engg.-in-Charge. ( (Make: wipro LL20-
221 --or similar model of LT/Trilux
/Philips/Panasonic/HALONIX or
equievalantreputed make & model A
catagory ISI marked as approved.). The
luminaire should be Replacement Warranty
will be 5 years .
SITC of Sleek LED 10-12 watt mirror
light fitting with extruded polycarbonate
housing,High optically efficient
diffuser,above wash basin complete with all
accessoriesetc. directly on wall, including
connection with 1.5 sq. mm FRLS PVC
insulated, copper conductor, single core
cable and earthing etc. as required as per
566 38 direction of Engg.-in-Charge. Nos 6.00 868.48 5,210.88
( Make : WIPRO Model No:LL20-111-XXX-
60-NE or similar model of
PHILIPS/Panasonic/HALONIX or
equievalant reputed make & model A
catagory ISI marked as approved. )The
luminaire should be Replacement Warranty
will be 5 years
Supplying and fixing of Energy efficient
recess mounted LED luminaire with white
powder coated ,pressure die-cast Al housing
,with high transmititivity,non-yellowing PMMA
diffuser, with wattage not more than 20 watt
and lumen output not less than 2600 Lumen (
120 lumens/watt ) of size240 x240 x 40 mm ,
,CRI not less than 80,CCT of 5700-6500
degree K,THD less than 10%, with Non
integrated isolated driver (protects the output
/secondary side from any disturbance on the
input / primary side ensuring safe operation),
all other accessories , life : 50,000 burning
hours (5 years warranty) , Internal surge
protection of 3 KV suitable for operation on
230 V, 50 Hz supply as required as per
direction of Engg.-in- Charge. (Make: wipro
LDB1-171-XXX-60-SM or similar model of
LT/Trilux /Philips/Panasonic/HALONIX or
equievalant reputed make & model A
catagory ISI marked as approved.) The
luminaire should be Replacement Warranty
will be 5 years.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying, installation, testing and
commssioning of 400 mm sweep wall fan
Make-Equievalant higher model with 3 star
Havells/almonard/Anchor/Panasonic/Usha/Ha
lonix or equievalant reputed make & model A
catagory ISI marked as approved ) including
wiring with 1.5 sq mm PVC insulated, copper
conductor, single core cable
Supplying and fixing extra conduit down rod
of 20 cm length G.I. pipe 15 mm dia, heavy
gauge including painting etc. as requiredas
required as per direction of Engg.-in-Charge .
569 41 (Note : More than 5 cm length shall be Nos 25.00 38.94 973.50
rounded to the nearest 10 cm and 5 cm or
less shall be ignored)of ISI mark as
BDBS,DB,AC DB,FLOOR PANELS,MCBS
Supplying and fixing of following
mentioned way, three pole/single pole
and neutral, sheet steel,double door MCB
distribution board, 415 volts/240 volts shall be
as per IEC 61439-3,integrated door earthing
system offering additional safety to the
user,High quality polyurethane Gasket,the
box and cover shall be fabricated to
withstand IK09,the DB should be properly
pre-treated with 7 tank process and duly
powder coated, phosphatized with powder
coated finish, on surface/recess, complete
with terminal blocks,with suitable size FR
PVC insulated copper conducter up to
terminal blocks, tinned copper busbar, neutral
busbar, earth bar, din bar. Make-LEGRAND-
Ekinox3 DB/ Siemens-Betaguard/
4 Way(8+12) Way TPN MCB DD DB
Horizontal Type as per IEC 61439-3 suitable
for Flush mounting and Surface mounting
with 100A Copper Bus Bar for each phase,
with neutral Bus bar, Earth Bar & Cable ties
for cable management, prefitted masking
sheet, IP43-IK09 with metal door(FOR
LIGHT,POWER INDOOR,3-PH,POWER
LOAD) Warranty on DB is 2 years.
Supply and fixing of 12 way DD single pole
and neutral sheet steel MCB distribution
board 250V on surface/recess complete with
tinned copper bus bar, neutral bus bar,
earth bar, din bar, detachable gland plate,
interconnections, phosphatized and powder
573 45 painted including earthing etc. as required Nos 2.00 2254.98 4,509.96
(but with out MCB/ RCCB/ Isolator) (ALL
LIGHT WITH CORRIDOOR/COMMON
AREA,EM LIGHT,UPS LOAD, EM LOAD
LIGHT LOAD,POWER LOAD )
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
2+4 way MCB Enclosure DB (GLAZED
574 46 door)(only each EM. CONNECTION UPS Nos 1.00 1932.84 1,932.84
Supplying and fixing 20 amps rating, 240
volts, C series, Double poles MCB of
Make-LEGRAND-Ekinox3 DB/ Siemens-
Betaguard/ Schneider- Acti 9/L&T
(Equievalant model)/Panasonic(Equivalant
model) /ABB(Equivalant model) or
equievalant reputed make & model A
catagory ISI marked as approved in the
existing MCB DB complete with
connections as per direction of Engg.-in-
Charge. The MCB should be Replacement
Warranty will be 5 years .MCB should have
the fault indication system in different colour
for ON, OFF & TRIP condition or Mid trip
position for Trip conditions for
easier identification of fault.Warranty on MCB
Supplying and fixing 6 amps to 32 amps
rating, 240 volts, C series, single poles
MCB of Make-LEGRAND-Ekinox3 DB/
Siemens-Betaguard/ Schneider- Acti 9/L&T
(Equievalant model)/Panasonic(Equivalant
model) /ABB(Equivalant model) or
576 48 equievalant reputed make & model A Nos 36.00 158.12 5,692.32
catagory ISI marked as approved. the
existing MCB DB complete with connections
as per direction of Engg.-in-Charge. The
MCB should be Replacement Warranty will
be 5 years.MCB should
Supplying and fixing 25Amps DP
240 volts, RCCB,300mA Make-
Equievalant higher model of
Legrand/Snheider/Siemens / L&T/Panasonic
/ABBor equievalant reputed make & model A
577 49 catagory ISI marked as approved in the Nos 2.00 1994.20 3,988.40
existing MCB DB in the existing MCB DB
complete with connections as per direction of
Engg.-in-Charge. The RCCB should be
Replacement Warranty will be 5 years
Supplying and fixing 40Amps DP
240 volts, RCCB,300mA Make-
Equievalant higher model of
Legrand/Snheider/Siemens / L&T/Panasonic
/ABB or equievalant reputed make & model
A catagory ISI marked as approved in the
existing MCB DB in the existing MCB DB
complete with connections as per direction
of Engg.-in- Charge. The RCCB should be
Replacement Warranty will be 5 years
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing 63Amps
TPN 415 volts, RCCB,300mA
Make-Equievalant higher model of
Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant
reputed make & model A catagory ISI
579 51 marked as approved in the existing MCB Nos 2.00 3121.10 6,242.20
DB in the existing MCB DB complete
with connections as per direction of Engg.-
in- Charge.(for power BDB & AC ODU, 8 way
TPN BDB IC).The RCCB should be
Replacement Warranty will be 5 years
580 52 (Earthing) INSTALLATION 0 0.00 0.00 0.00
S/IT/C of materials and installation of pipe
earth electrode made out of 50mm dia class
B G.I. pipe of 3.0 metre long with
581 53 arrangements for fitting/ termination of G.I. Nos 3.00 2987.76 8,963.28
flat / wire with G. I. nut bolts & washers
Providing and fixing 4 mm dia copper wire on
surface or in recess for loop earthing as
required.as per direction of Engg.-in- Charge.
Providing and fixing 25mm x 5 mm copper
strip on surface or in recess for connections
etc. as required as per direction of Engg.-in-
CABLING AND END TERMINATION MAIN
Supplying of one number PVC insulated
armoured and PVC sheathed XLPE property
AL. conductor power cable of 1.1 KV grade
POLYCAB/HAVELLS/Finolex or equievalant
reputed make ISI marked as approved of
following size cables as per direction of
585 57 Engg.-in-Charge. Ncessary test report & 0 0.00 0.00 0.00
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free after sales service within warranty period
for acceptance of materials
4core x 16 sq mm (MDB TO FDBL/FDBU
4 core x 4 sq mm (for small power/LIGHT TO
588 60 3.5core x 35 sq mm (To power MDB) Mtr 73.00 257.72 18,813.84
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
exceeding 25 SQ. MM direct in ground in the
trench in one horizental formation including
excavation ,sand coushing protection
covering and refilling the trench etc as
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
exceeding 25 SQ. MM direct in ground in the
EXISTING PIPE etc as required as per
direction of Engg.-in -charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
25 SQ. MM but not exceeding 400 SQ. MM
direct in ground in the EXISTING PIPE etc as
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
593 65 exceeding 25 SQ. MM in open duct etc as Mtr 8.00 42.48 339.84
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
25 SQ. MM in open duct 400 SQ. MM direct
in ground in the EXISTING PIPE etc as
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated
/XLPE power cable of 1.1 kv grade size
not exceeding 25 SQ. MM in surface
with shaddle and screw etc as required as
per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
exceeding 120 SQ. MM From 25 SQ. MM in
surface with shaddle and screw etc as
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
exceeding 400 SQ. MM From 120 SQ. MM in
surface with shaddle and screw etc as
required as per direction of Engg.-in -charge.
Supplying and making end termination with
brass compression gland and aluminium lugs
598 70 for following mentioned size cable.as per 0 0.00 0.00 0.00
direction of Engg.-in-Charge.
Providing,fixing and laying of fallowing dia
601 73 G.I. pipe (medium class) in ground complete 0 0.00 0.00 0.00
with G.I fitting incl. trenching(75
Providing,fixing and laying of fallowing dia
HDPE pipe (medium class) in ground
603 75 complete with fitting incl. trenching(75 mm 0 0.00 0.00 0.00
depth)and refilling as per direction of Engg.-in-
S/I/T&Commissioning of LT indoor floor
mounted cubical type electrical main panel
(for both light and power circuit) made out by
2mm CRCA steel sheet duly derusted &
pented by simens gray powder cote paint is
designed as G.A drawing as per direction of
Engg.-in-Charge. Warrentee period of
replacement of panel & accessories must be
5 years & compelete
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
In commer Main- 01 number of 125(80-
125) Amps 4P MCCB with Rom & sprader
link,25 Ka & 01 nos of 63A 4P O/L
changeover switch for DG & Servo. . (make-
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked)(Icu=100%Ics)with shunt trip.with
axulary for BMS
Busbar- 04 numbers of 200Amps
Electrolytic copper busbar duly sleeved by
609 81 color coaded PVC sleeve & supported by 0 0.00 0.00 0.00
suitable size DMC insulator.
Busbar DG - 04 numbers of 60 Amps
Electrolytic copper busbar duly sleeved by
color coaded PVC sleeve & supported by
suitable size DMC insulator.
Out going- (i) 63A 4P MCB 2 NOS FOR
611 83 POWER BDB GF,1f(Legrand/Schneider 0 0.00 0.00 0.00
Out going- (ii) 02 nos 32A 4P MCB LIGHT
BDB AC IDU BDB/LIGHT
BDB,LIFT,WATER,solar,ups(Legrand/Schnei
Out going- (iii) 01 no 32A 2P MCB LIGHT
BDB AC IDU BDB/LIGHT
BDB,LIFT,WATER,solar,ups(Legrand/Schnei
Instrument- (i)3 numbers phase indicating
614 86 lamp with toggle switch & HRC fuse. 0 0.00 0.00 0.00
(ii) 01 set of digital type multifunction meter
voltage,current,frequency,PF,THD indication
HOT DIPP GALVANIZED(GC) AS PER EN-
ISO-1461 , CARBON STEEL WIRE MESH
CABLE TRAYS with internal
dimensions of size 54mm(H) x 200mm(W),
of Legrand - Cablofil make or equievalant
reputed make & model A catogory, ISI
marked as approved .The Load bearing
capacity of the Cable Trays should be
minimum of 104.8Kg/meter at the span of
1.5Meter as per UL specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee
HOT DIPP GALVANIZED(GC) AS PER EN-
ISO-1461 , FLOOR RACE WAY WITH
JUNCTION with internal
dimensions of size 54mm(H) x 200mm(W),
of Legrand - Cablofil make or equievalant
reputed make ISI marked as approved .The
Load bearing capacity of the Cable Trays
617 89 should be minimum of 104.8Kg/meter at the mtrs 4.00 1295.64 5,182.56
span of 1.5Meter as per UL
specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required.
618 0 Sub-Total of Electrical Works 0 0.00 0.00 6,90,261.31
619 0 Firefighting Works 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
620 1 EXTINGUISHER SYSTEM 0 0.00 0.00 0.00
Portable Fire Extinguisher System
Supplying, installation, testing and
commissioning of CO2 type Fire
Extinguisher 4.5 kg capacity confirming to
IS: 2878 made from ISI marked
seamless cylinder confirming to IS:
621 2 7285, fitted with ISI marked controlled Nos 3.00 12302.68 36,908.04
valve confirming to IS: 3224, high
pressure 1mtr discharge hose & horn
complete with initial gas charged with
carrying handle & wall mounting bracket
as per direction of Engineer-in- charge.
Providing and installing in position the
following type of sign boards made out of
3mm thick "Opaque" PVC foam board
622 3 with computer cut, PVC non- reflective 0 0.00 0.00 0.00
self adhesive vinyle painted foam board,
complete with mirror fasteners.
Providing and fixing the signages "Fire Exit,
Fire Exit Arrow Down,Fire Exit Arrow
Left,Fire Exit Arrow Right" of 1.5in height
623 4 letters in white with green back ground.The Nos 5.00 1080.88 5,404.40
size of the board shall be 25cm x 15 cm and
shall be fixed at the height of 2 mts
624 0 Sub-Total of Firefighting Works 0 0.00 0.00 42,312.44
625 Grand Total 98,90,761.44
625 Grand Total 98,90,761.44
Abstract Estimate for Package No. BOL-001-NHM : Construction of DAY CARE PHC At KULUSING,GUNUPUR,ODISHA
*Rates including taxes
Head Description of Item Unit Qnty. Rate Amount
Earthwork in excavation in hard soil for site
leveling, foundation, pits, trenches and other
civil works upto and including 1.5metre lift
and stacking the soil upto a lead of 100 metre
2 1 and including dewatering, removing slush, 0 0.00 0.00 0.00
shoring and strutting (as required), complete
as per specification and as directed by the
Engineer-In-Charge.
Filling in foundation trenches and plinth, with
excavated earth including laying the earth in
layers not exceeding 23.5 cm thick ramming
4 3 & watering with all leads & lifts including cost Cum 190.92 135.58 25,885.32
of all labour,T&P completed as directed by
the Engineer-in-charge.
Supplying and filling sand in foundation and
over areas including watering, ramming,
consolidating and dressing, labours, tools,
taxes etc. all complete as per the
specification and direction of Engineer-In-
Digitally signed by Rakesh
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NITRAY003.pdf
Tender Document
BOQ.pdf
Tender Document
Drawings.pdf
Tender Document
GCC with Amendments05.pdf
Tender Document
MAKE LIST.pdf
Tender Document
Physical Milestone.pdf
Tender Document
SCC.pdf
Tender Document
Scope of work.pdf
Tender Document
Signed IP.PDF
Tender Document
Amendment06.pdf
Tender Document
addendum-36278ee7d4cc-Addendum01.pdf
pdf • 0.64 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .