Replacement of Existing Taxiway and Apron Edge Light fittings with LED type Light fittings at Srinagar International Airport

Amount

Supply of elevated blue colour, omni-directonal LED type Taxiway Edge Light fitting for Apron edges and Taxiway Edge suitable for 2.8 amps to 6.6 amps series circuit (CCR supply) complete with LED lamp of wattage not more than 10W with thermal management having life of 50000 burning hours, 360°optical glass lens/dome, Electrical kit, breakable coupling/frangible pole, gasket, two pin secondary leads,base plate with stainless steel bolts, springs & plain washers complete with all accessories and confirming to latest ICAO's standards in all respect and suitable for installation on existing CI transformer housing boxes etc. as complete as required.

Supply of following Capacities,Series type, 5KV Grade,50Hz Isolating Transformer, made of super enameled copper wire,Two EPR Primary Cables of 5KV Grade with moulded plug and one EPR secondary twin-core cable of 1.1KV grade with molded two-pin receptacle, epoxy encapsulated and moulded with compounded moisture resistant neoprene rubber.

15 watt,6.6/6.6 amp (For Taxiway and apron Edge Light)

Supply of 1.0 mtr. Long Two pin secondary plug assembly suitable for Elevated LED type Taxi /Apron fittings.

Supply of C. I. isolating transformer housing box, water tight round type, metal container of outside diameter 330mm, height 450mm made of 10mm thick cast iron moulding all round, expect top surface, which is 15mm thick, cast iron moulding suitable to receive light fitting base plate/ cover plate on the top & under ground for housing transformer, power cable & having one/two/three nos holes as per site requirement on the periphery centre,75mm above bottom surface suitable to receive one no.of 50mm dia "B" class GI pipe as required. The box should have two SS earth bolts of M10 x 40mm tapped inside near the hole (4" away from the hole centre) and having a drain hole at the bottom suitably tapped to receive 15mm dia, 'B' class GI pipe and having clear opening of 220mm at the top surface and 6 nos. M10 tapped hole having center to center distance of 260mm to receive fitting/ base plate and bolts as required.

Supply of 1x6 sqmm, 5KV grade PVC insualted & PVC sheathed standard copper conductor Airport lighting cable confirming IS 1554 (Part-II) with upto date amendent as reqd. Confirming to particular specification etc. as reqd.

Supply of 0.6x0.6 mtr. (LXW) and 0.9 mtr. (h) size snow cap in square pyramid shape made with 3mm unbreakable acrylic sheet and base of M.S. iron frame Grade IS 4923 of size 50x50x4 (mm) with handles for lifting and including reflector on outer sheet suitable to cover existing elevated Taxiway/Apron Edge Light fitting (LED type) etc. as complete required.including all other accessories and alignment, levelling etc. all complete as required.

Supply of 5 KV grade plug and receptacle of type 1 class B connector and suitable field attachment with 5 KV grade PVC insulated PVC sheathed single core 6 sqmm size copper conductor cable confirming to the specified specification etc complete as required.

Supply of 50 mm size "B" Class GI Pipe, with upto date amendent as reqd. Confirming to particular specification etc. as required.

Installation, Testing and commissioning of elevated Taxiway/Apron Edge Light fitting (LED type) on the existing transformer housing boxes including all other accessories and alignment, levelling, isolating transformer connection, earth connection etc. all complete as required.

Dismantling of existing elevated type taxiway fittings completely alongwith isolating transformers after disconnecting the existing cable termination etc. all complete as required and stacking in electrical store in good condition within airport premises.

Dismantling of existing transformer housing boxes etc. all complete as required and stacking in electrical store in good condition within airport premises.

Installation of transformer housing boxes with base cement concrete of 1:3:6 of size 630 x 630 x 100mm thick, all round concrete of 1:2:4, 150mm thick, the top finished slope, including providing and fixing of 250mm long 15mm dia. "B" class GI pipe for drainage of water including excavation of side shoulder (bituminous / cc/soft soil) and refilling (wherever the transformers boxes are not in a line the same has to be aligned in such a way that the centre fall in a straight line) etc. complete as required.

Laying of sizes one no. PVC insulated, PVC sheathed /XLPE power cable of 5 KV grade, size upto 35 sq.mm, direct in ground including excavation sand cushioning, protective covering and refilling the trench etc, as required.

Laying of one additional number PVC insulated, PVC sheathed /XLPE power cable of 5 KV grade of size upto 35 sqmm direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 5 KV grade of size upto 35 sqmm. in the existing RCC/ HUME/ HDPE/stoneware /GI / METAL pipe as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 5 KV grade of size upto 35 qmm. in the existing masonry open duct / cable duct etc. as required.

Laying of 50 mm size "B" Class GI Pipe, including excavation of cc/hard/soft soil complete with threading and alignment of pipe with transformer housing box, providing check nuts as required.

Anil Kumar Sharma

AMA Private Limited

Vardhman Airport Solutions Pvt Ltd

Manish Electricals