REPAIR TO SECURITY FENCING, PATH/HARD STANDING AND REPAIR/REPLACMENT OF SEWAGE LINE WORK AT RHENOCK AND RONGLI UNDER GE 867 EWS

Amount

Excavation in trenches n exc 1.50m wide and not exc 1.50m deep for foundation and getting out in soft / loose soil, complete all as specified and as directed.

M & L for excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surfaces in soft/loose soil, complete all as specified and as directed.

Dismantling fencing wire mesh, any type, complete all as specified and as directed.

Dismanting wrought iron or mild steel work of any description not otherwise complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically complete all as specified and as directed

Demolition of stone slabs or tiles of any description or thickness in floors, aaprons etc laid and bedded in cement mortar, complete all as specified and as directed.

Dismantling of brick work or stone/ boulder masonry, built cement mortar including all quoins, arches, pillars, etc, including ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillers etc complete all as specified and as directed.

Demolition of concrete block walling built in cement mortar including all quoins, arches, pillers etc complete all as specified and as directed.

Taking down cement plaster any description on brick or stone walls etc, incluning racking out joints, hacking for key, scrubbing down with water etc all as specified and as directed. .

Demolition and breaking up 100/110mm old broken PVC (SWR), AC, SWG soil waste and vent pipe including accessories set in cement mortar complete all as specified and as directed.

Demolition and breaking up 150/160mm old broken PVC (SWR), AC, SWG soil waste and vent pipe including accessories set in cement mortar and removing rubbish from site complete all as specified and as directed.

M&L Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm in soft / loose soil, complete all as specified and as directed.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.50m above the starting point, complete all as specified and as directed.

S & F of 100mm cast iron soil waste and vent pipes (sand cast) in any length with or without ears laid in trenches or in floors complete all as specified and as directed.

S&F of 110mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and as directed. Note : Excavation and earth work measured and paid separately)

S&F 75mm dia PVC (SWR) pipes single socketed fixed in as weep hole complete all as specified and as directed.

S&F of 160mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints laid in trenches complete all as specified and as directed. (Note : Excavation and earth work measured and paid separately)

S & F 150mm dia salt glazed stone ware drain pipes laid in trenches and jointed complete all as specified and as directed.

M & L PCC 1:3:6, type C-2 concrete bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested in 100/110mm dia pipe complete all as specified and as directed.

M & L PCC 1:3:6, type C-2 conrete bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested in 150/160mm dia pipe complete all as specified and as directed.

S & F cast iron bends (any radius) diminishing pieces or taper 100mm bore complete all as specified and as directed.

Cleaning of exsting choked sewage line of pipe 100/110 mm bore by rodding and watering and taking out sluge through manholes etc. complete and disposal of same to a previously dugged out pit after filling the upper surface with earth and 2 cm thick lime over filled earth including sprinking of bleaching power, complete all as specified and as directed.

All as per item No 24 above but 150/160 mm bore, complete all as specified and as directed.

Cleaning existing man holes, septic tank etc by dewatering and taking out sludge and solid deposits from the septic tank and man holes etc completely and browing the sludge and solid diposited in a nearly dug pit with in 100mtr and covering the sludge and solid deposited etc with earth and 2cm thick lime on top surface to prevent spread of foul smell after taking out sludge and solid deposits, the inside of the septic tanks manholes etc should be cleaned with water complete all as specified and as directed.

M&L for precast cement concrete type-B-1, 1:2:4 (20 mm graded aggregate) as in man holes cover, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement morter 1:6 complete all as specified and as directed.

M&L Mild steel round bars 10 mm dia and over,cut to length,bent to shape required, including cranking, bending for rungs/hooks in manhole cover, complete all as specified and as directed.

M&L mild steel tmt bars 10mm dia and over cut to length bend to shape required incld cranking bending spirally for hooping for column, hooking ends and binding with and incld mild steel wire (annealed not less than 0.90mm dia or securing with clips, complete all as specified and as directed.

M&L Mild steel TMT bars 6 to 8 mm dia,cut to length,bent to shape required,including cranking, bending spirally for hopping for columns,hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia, complete all as specified and as directed.

M & L for precast cement concrete type C-1, 1:3:6 (using 20mm graded stone aggt) block masonry with solid blocks exc.10cm in width and setting in CM 1:6, complete all as specified and as directed.

M & L precast cement concrete type C-1, 1:3:6 (using 20mm graded stone aggt) block masonry with solid blocks exc.10cm except block and setting in CM 1:6. but except block complete all as specified and as directed.

M & L cement concrete type D-2, 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

M & L for cement concrete type C2 1:3:6 (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

M&L for PCC type C2 (1:3:6) using 40 mm graded stone aggregate) as in surface channels and drain etc, complete all as specified and as directed.

M & L for providing cement concreteType C-1, 1: 3 : 6 (using 20 mm graded stone aggregate) in coping including weathering slightly rounded or chamfered angles and throating etc complete all as specified and as directed.

M&L for precast cement concrete type-B-1, 1:2:4 (20 mm graded aggregate) as in drain cover slabs, set in cement morter 1:6 complete all as specified and as directed.

M&L for cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in kerbs for interlocking tiles etc complete all as specified and as directed.

M&L for 100 mm thick cement concrete type B-2, 1:2:4 (using 40 mm graded crushed stone aggregate) as in floors finished even and smooth using extra cement complete all as specified and as directed.

M&L for 75mm thick cement concrete type C-2, 1:3:6 (using 40 mm graded crushed stone aggregate) as in plinth protection, path/steps etc complete all as specified and as directed.

Form work to sides of concrete foundations, footings, bases of columns and plinth beam and similer work etc in rough finished surfaces of concrete flat, complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brick work or concerte surface in cement mortar 1:3, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brick work or concerte surface in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed.

M & L for flush pointing to block in course or ashlar masonry or concrete block walling in cement mortar 1:4 all as specified and as directed.

M & L three coats of white wash on newly plastered surfaces including preparation of surfaces, complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standerds, rails, straining bolts etc including provision of binding wire complete all as specified and as directed.

Supply only chain link MS galvanised fencing any size or type complete all as specified and as directed.

S & F galvanised 2 stand steel barbed wire 2.24mm dia barbed with 2mm dia at barbs 75mm spaceing and strainings and fixed to any type of standard rails staning bolts including securing or tying at crossing with provision of GI mid steel pins etc including dismantling old rusted barbed wire any type complete all as specified and as directed.

S & F Hot-Rolled steel angle or other section as in post and struts in fencing including cutting tops to shape as directed, drilled holes , notching for wire, etc ; flat iron fillets (for securing wire mesh etc.) including all necessary drilling , bolting or riveting , etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and asdirected.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, length n exc 6 cm and dia of neck 11 to 15 mm complete all as specified and as directed.

M & L for preparing new steel surfaces of any descripation over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M & L for preparing new steel surfaces of any descripation not exc 10cm width or girth and applying, two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M & L for preparing new steel surfaces of any description exc 10cm width or girth and applying two coats of black japan paint complete all as specified and directed.

M & L for chequred cement concrete tiles 30cm x 30cm x 25mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 20 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M & L machine pressed precast concrete interlocking paver block with grey cement and pigmnet any shape and size confirming to IS 15658-2006 of 60 mm thickness , M-35 Grade with colour rubber finishes on top over sand dust cushions, complete all as specified and as directed. Note - Sand filling under for interlocking tiles will be measured and paid seperatly

M & L for sand filling under for interlocking tiles including watering and consolidation complete all as specified and as directed.

Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.

SCHEDULE OF CREDIT

SANJAY SAW MILL

DEEP CHANDRA JOSHI

MS MAYA PRAKASH GOEL AND SONS

SANJAY MITTAL

RAMESH GURUNG

HEM RAJ GURUNG

MS BRAHMA CONSTRUCTION