REPAIR REPLACEMENT OF JOINERY COUNTER TILES FINS FACIA PLASTER ETC IN OTM AREA INCLUDING SPORT COMPLEX OF HQ WAC SUBROTO PARK AND CERTAIN AREA OF AGE BRI UNDER GE AF SUBROTO PARK

Amount

Demolition of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets/board fixed in aluminium door or partition, any thickness, including cover fillets & framed work if necessary, and removing of debris/ rubbish off the premises complete all as specified and as directed Eng-in-Charge.

S & F in repairs 'E' board(Design: LACK & hILL) MAKE: 605x605x4 mm thick, white pre laminated set embosed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24 mm wide T-section exposed flanges which shall be power coated white. The frame work shall be comprise of main runner made from 0.33 mm thick galvanised steel sheet and of size 24 mm X32mmX300 mm board spaced at 120 mm maximum centre to centre, hangers of GI wire4 mm dia to be fixed by approved rawal plug level and fasterners and screws etc.

The last hanger at the end of each main runner shall not be greater than 450 mm from adjecent wall , flushing fitting of 1200 mm longer cross tee (with double stitching) to be interlocked between main runners at 600 mm centre to centre from 1200X600 mm modules cross tee longer than 600 mm to be supported independently . 600mm long cross tee centrally between the 1200 mm cross tee (with double stitching) to be interlocked between main runners at 600 mm centre to centre from 1200X600 mm modules cross Tee longer thyan 600 mm to be supported independently . The perimeter wall angle shall be 0.45 mm thick GS sheet of size 19 mm X 19 mm and 300 mm long of white colour , incl demolition/ dismantling of old wall/ ceiling boards , any thick fixed to any frame / fillet work, all as per manufacturer's instructions complete all as specified and as directed Eng-in-Charge.

M&L for PVC profile for wall panelling of size 23cm wide, 8mm over all thick and 01mm wall thickness fixed with screw to mild square tubular steel frame work mad e out of MS Hollow section of size 25mm x 15mm x 2mm spacing 01 meter on both side frame work shall be fixed in wall with the help rawl plug and required length of screws and MS work shall painted with one coat of Red oxide primer for wall panelling, incl demolition/ dismantling of old wall/ ceiling boards , any thick fixed to any frame / fillet work complete all as specified and as directed Eng-in-Charge.

Providing and fixing 10mm thick plaster of Paris ceiling (Gypsum anhydrous) to sunk or raised moulding to flat surface over metal frame work incl reinforced with G.I. wire mesh & Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre & Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long incl taking down old ceiling and two coat of OBD over finish surface , incl demolition/ dismantling of old wall/ ceiling boards , any thick fixed to any frame / fillet work complete all as specified and as directed Eng-in-Charge.

Supply, fabrication and erection of structure on any shape (round, oval or box type) for 3mm thick Aluminium composite panel cladding made of aluminium channel (25 x 50 x 1.6mm) with cleat angle (8 x 18 x 2mm) necessary hardware with material and material and weather sealant to make joint leak proof and supply and fixing of 3mm thick PVDF coating Aluminium composite panel complete in all respect of Indo bond or equivalent make as per approval of GE. Spacing of the channel should be as per manufacture instruction, incl demolition/ dismantling of old wall/ ceiling boards , any thick fixed to any frame / fillet work complete all as specified and as directed Eng-in-Charge.

Demolition of , hearth or wall tiling (floor/wall tiling of ceramic/ kota stone/ marbles/ granite) including cement mortar bedding (but not backing) removing rubbish/ debris out off the defence premises complete all as specified and as directed Eng-in-Charge.

M&L for PCC 1:2:4 type B-1(20mm graded aggregate), 25mm thick as in sub base to the tile flooring , incl demolition of unreinforced cement concrte as in floors, pavings n.exc 15 cm thick complete all as specified and as directed Eng-in-Charge.

M&L non skid ceramic coloured printed tiles 7 to 8 mm thick (square/rectangular) area of each tiles exc 0.11 sqm but n. exc 0.18 sqm, in floors or dado etc set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or bedding layer in cm (1:4) complete all as specified and as directed Eng-in-Charge.

M&L Glazed printed/ coloured ceramic tiles in vertical surface 300X200X7mm / 350x 250x 7 mm / 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in cement mortar(1:4) complete all as specified and as directed Eng-in-Charge.

M&L for vitrified double charge ceramic tiles 9 to 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors/ skirting/ dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc over 15 mm th screed in cement mortar 1:6 complete all as specified and as directed Eng-in-Charge.

All as per item No. 10 above but in dado over 10mm thick rendering in CM 1:4 complete all as specified and as directed Eng-in-Charge.

M&L Machine cut kota stone slab flooring 20-25mm thick over 15mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and as directed Eng-in-Charge.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado & pillar over 15mm thick plater in CM (1:6) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and as directed Eng-in-Charge.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with whitecemt with admixture of pigment to match the shade of granite stone including grinding and polishing type , over 20 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and as directed by Engineer-in-Charge.

M&L 20mm th Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, WHB counter and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl cutting for WHB etc over 15 mm thick screed bed or bedding layer of cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.

M & L for taking down cement plaster of any description on brick or concrete surfaces of walls or ceiling etc ., incl rendering 15mm thick in ready mix mortar having ratio euaivalent to CM (1:4) , on brick work or concrete surfaces on wall and finished even and smooth without using extra cement mixed as a whole or in patch work complete all as specified and as directed Eng-in-Charge. Make : SIKA / Dr Fixit / Ascolite as approved by GE. Note : White cement shall be used as per site requirement , water proofing compound shall be measured and paid separately and applying two coats cement base paint over a priming plastered and other surfaces with alkali resistant priming paint, incl removing of debris / rubbish off the premises out of MOD land Complete all as specified and directed.

M & L for taking down cement plaster of any description on brick or concrete surfaces of walls or ceiling etc .,15 mm thick rendering of ready mix mortar having ratio euaivalent to CM 1:6, on brick work or concrete surfaces on wall and finished the surface even and smooth as a whole or in patch work complete all as specified and as directed Eng-in-Charge. Make : SIKA / Dr Fixit / Ascolite or equivalent as approved by GE. Note : White cement shall be used as per site requirement as directed by EIC incl removing of debris/ rubbish off the premises out of MOD land all as specified and directed.

M & L for taking down cement plaster of any description on brick or concrete surfaces of walls or ceiling etc ., 5 mm thick rendering with ready mix mortar having ratio euaivalent to CM 1:3, on concrete surfaces as on ceiling, soffit of stair case, chhajjas facia etc including cement slurry etc finished the surface even and smooth as a whole or in patch work complete all as specified and as directed Eng-in-Charge. Make : SIKA / Dr Fixit / Ascolite as approved by GE. and preparation of new plastered surface of ceiling and applying two coats of Oil Bound Distemper over chalk whitening incl removing of debris/ rubbish off the premises out of MOD land all as specified and directed. complete all as specified and directed.

M&L for complete removal of existing treatment from external surfaces of walls by brushes and washing down and stopping of surface and levelling / edging the disturbed portion plane/edges using necessary filling compound of putty to obtain smooth/regular/even finish surface with using of sand paper etc and prepare surface , applying two coats of exterior weather proof (coat) paint on plastered/conrete surfaces of walls over a coat of primer complete all as specified and as directed by the Engineer-in-Charge.

M & L for preparation of old decorated surfaces of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. including cornices, pilasters etc. (Plastered or unplastered surfaces) and applying two coats of exterior plastic emulsion coloured complete all as per manufacturers instructions complete all as specified and as directed Eng-in-Charge. Make of Exterior plastic emulsion : Asian (Apex Ultima) or equivalent of Berger or ICI.

M&L for preparation of old decorated surfaces of walls including washing, rubbing down and stopping of distempered and painted surfaces and applying two coat of oil bound distemper (white/ tinted) on walls , incl 1.50 mm thick putty finish complete all as specified and as directed by the Engineer-in-Charge.

M&L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and smooth w/o using extra cement in patch work of chhajja and ceiling incl supply and fixing of chicken wire mesh of dia 0.6mm mesh size 50mm and 2 coat of OBD/ Cement base paint in matching tint incl taking down of plaster complete all as specified and as directed Eng-in-Charge.

M&L for five layer prefabricated atactic polypropylene polymer (APP) modified 3 mm thick membrane ( weight not less 3 kg/sqm) reinforced with 160 gsm polester non-woven fabric with scratched tool before finishing roof surface. When the concrete surface is still green, 10 mm thick 1:4 cement plaster shall be laid the roof surface shall be throughly wire brushed washed dried up and cleaned of all foreign matter and dust prior to the application of primer on the dried surface one coat of approved bituminous primer, having density in the range of 0.87 to 0.89 / kg at 25 dgree and viscositing of 70 to 130 CPS manufactured by the same manufacturer @ 0.40 litres/sqm shall be applied.

APP membrane shall be laid on primed surface b tourch application mehtod after allowing 24 hours of primer to dry. Laying of APP membrane shall be commneced at the lowest level and worked upto the crest.APP membrane will normally be laid in length at right angle to the direction of slope. The overlaps shall be of minimum 100 mm on longitudinal direction and 150mm on the transverse direction. All overlaps shall be bonded with bitumen primer and levelled by the heating the overlaps with brutane tourch. This treatment shall be done by the approved authorised applicator. Guarantee of treatment shal be for 10 years. Thereafter APP membrane shall be painting with two coat of water proofing paint with aluminium finish. Incl removing of old roof treatment of any description.

M&L providing padding on roof cement cocrete Type B0 (1:2:4) (12.5 mm graded aggregate ) complete all as specified and as directed Eng-in-Charge.

Supply only Liquid water proofing compound complete all as specified and as directed by Engineer-in-Charge.

S& F in repair 110 mm bore PVC (SWR ) pipe single socketed in any length with rubber ring joints, laid in trenches or in floors etc including removing from site complete all as specified and as directed by Engr - in- charge.

S&F in repair PVC (SWR) bends any radius for 110 mm bore PVC pipe with cement joints complete all as specified and as directed Eng-in-Charge.

S& F in repair 75 mm bore PVC (SWR ) pipe single socketed in any length with rubber ring joints, laid in trenches or in floors etc including removing from site complete all as specified and as directed by Engr - in- charge.

S&F in repair PVC (SWR) bends any radius for 75 mm bore PVC pipe with cement joints complete all as specified and as directed Eng-in-Charge.

S&F in repair PVC (SWR) gully trap 125/110 mm setting and jointing with solvent complete all as specified and as directed Eng-in-Charge.

S&F in reapir PVC (SWR)'S' trap 75mm with grating including jointing with solvent complete all as specified and as directed Eng-in-Charge.

Taking down frame or Chowkhats (w/o taking off shutter from the frame) of any description not exc. 1.50 Sqm each complete all as specified and as directed Eng-in-Charge.

Taking down frame or Chowkhats (w/o taking off shutter from the frame) of any description exc. 1.50 Sqm but n exc 4.0 sqm each complete all as specified and as directed Eng-in-Charge.

S&F for Factory made solid PVC moulded door with particle board core shutter 28 to 30mm thick (stiles) with 2,4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, fixing in frame at site as per specification complete all as specified and as directed Eng-in-Charge.

S&F PVC solid door frame of size 50mm x47mm made out of 5mm single side prelam PVC sheet reinforced with MS square tube, fixing in opening complete all as specified and as directed Eng-in-Charge.

S&F 100 mm long butt hinges medium weight cold rolled mild steel alloy with galvanized complete all as specified and as directed Eng-in-Charge.

S&F 100 mm long Aluminium handles, cast type, anodised complete all as specified and as directed Eng-in-Charge.

S&F of 75 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed Eng-in-Charge.

S & F flush shutters,40 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed Eng-in-Charge.

M & L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and as directed Eng-in-Charge.

S&F in repairs Aluminium (extruded section body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed Eng-in-Charge.

M&L powder coated aluminium wk as in partition wall/door Chowkhats/door/ windows shutters using JINDAL section single groove any suitable section conforming to IS-733 and IS-1285 amd coating grade A-153 confirming to IS-1868 fixed with rawl plug and screw or with fixing clips with expansion hold fasteners including necessary jointing cleats, glazing clips, rubber packing anodised aluminium snap beading packing anodised aluminium snap beading screws, powered coated anodised aluminium fittings etc gap of junction at top, bottom & sides to be filled with silicone fillers/Neoprene felt etc complete all as specified and as directed Eng-in-Charge.

M/L Powder coated aluminium door shutters, aluminium section weighing 1.3 kg/m approx including each shutter having 2 Nos. ‘D’ type aluminium handles of 200 mm long, 2 Nos. aluminium tower bolts of 200 mm long and 1 No. mortice lock of 6 lever with key in duplicate, regulated by double action hydraulic floor door spring, shutter partly glazed with 5.5 mm thick sheet glass and partly panelled with 12 mm thick pre-laminated particle board fixed with glazing clips, rubber beadings and aluminium beading complete all as specified and as directed Eng-in-Charge. Note : Glass & Prelaminated particle board paid separately

M/L Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m approx. including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed Eng-in-Charge.

S&F in Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed Eng-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/Steel/Aluminium frames glazed with putty or fixed with bead. (Old bead to be reused to fix glass) complete all as specified and as directed Eng-in-Charge.

S&F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed Eng-in-Charge.

S&F 12mm thick Prelaminated particle boards Prelaminated both side with decorative choice laminations as drawers , door partition cup board shutters, partition wall, etc including same colour lamination tape/beading on all exposed edges complete all as specified and as directed Eng-in-Charge.

S & F in repair 32mm dia aluminium powder coated drapery rod including all necessary fixing arrangement like clamps, end brackets, end to end bracket complete all as specified and as directed Eng-in-Charge.

Taking down or up steel water tubing and removing to store complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 53 above but 20 mm bore complete all as specified and as directed Eng-in-Charge..

S & F steel water tubing, galvanised, medium grade, ISI marked with all fittings and fixed on walls and ceilings or laid in floors bore of pipe 15 mm complete all as specified and as directed Eng-in-Charge.

All as per Item No. 55 above but 20 mm bore complete all as specified and as directed Eng-in-Charge..

M & L for PCC 1 : 2 : 4 type B - 2 (Using 20 mm graded stone aggregate) in roof kerbs, plateform for PVC tank etc complete all as specified and as directed Eng-in-Charge.

S&F in repair to rotational moulded vertical water storage tanks triple layer ( White colour) with closed tops ( cylindrical ) hoisted and fixed in position 500 litre capacity including disconnecting and refixing the existing GI fitting and pipe complete all as specified and as directed Eng-in-Charge.

S&F in repair to rotational moulded vertical water storage tanks triple layer with closed tops ( cylindrical) hoisted and fixed in position 1000 litre capacity including disconnecting and refixing the existing GI fitting and pipe complete all as specified and as directed Eng-in-Charge.

S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed suitable for iron pipe 20mm bore complete all as specified and as directed Eng-in-Charge.

S&F in repair gate valves gun metal with iron wheel head screwed both ends for iron pipe and fixed 20 mm bore fixed complete all as specified and as directed Eng-in-Charge.

S&F in repair bib taps long body , cast copper alloy, fancy type with crutch or butterfly handles, chromium plated, screwed down to iron pipes or for brass ferrule of 15 mm bore complete all as specified and as directed Eng-in-Charge.

S&F in repair stop valves, cast copper alloy, fancy type, chromium plated with long shank & cup (concealed type) with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified and as directed Eng-in-Charge.

S&F in repair stop valves, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified and as directed Eng-in-Charge.

S&F in repair two way stop valves, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified and as directed Eng-in-Charge.

S&F in repair 15 mm pillar taps swan neck cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or without lettered "Hot" or Cold with long screwed shanks and fly nuts screwed for iron pipes and fixed , fancy type complete all as specified and as directed Eng-in-Charge.

S&F in repair brass chromium plated waste coupling 32mm bore WHB complete all as specified and as directed Eng-in-Charge.

S&F in repair 15mm dia PVC Connection 450 mm long with brass nuts complete all as specified and as directed Eng-in-Charge.

S&F in repair 10 litre PVC valve less symphonic action type Low level flushing cistern with inlet ball valve float and handle incl CI bracket and 32mm bore PVC flush pipe and connection to pipe complete all as specified and as directed Eng-in-Charge.

S&F in repair CP Towel rail 450mm long 20mm dia fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed Eng-in-Charge.

S&F in repair CP soap dish, fixed to plugs with chromium plated brass screws etc complete all as specified and as directed Eng-in-Charge.

S&F in repair glass shelf assembly consisting of 5.5 mm thick sheets glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed Eng-in-Charge.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) excluding flushing cistern and flush pipe and including P or S trap complete all as specified and as directed Eng-in-Charge. Make : Jaquar / Hindware / Parryware

S&F in repair vitreous china squatting pan “Orissa” pattern of size 580mmx440mm “white” with integral foot rest (excluding flushing cistern and flush pipe) incl provision of cement concrete bedding, CI ‘P’ trap 100mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and as directed Eng-in-Charge. Make : Jaquar / Hindware / Parryware

S&F in repairs CP bottle trap with internal partition 32mm size 300 mm x 190 mm with wall connection pipe and wall flange complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 32mm bore and 75cm long PVC flexible waste pipe for WHB complete all as specified and as directed Eng-in-Charge.

S&F in repairs vitreous china wash hand basin of size 550 mm x 400 mm white, flat back incl angle iron brackets incl waste pipe of 32 mm dia of suitable length, pvc connection of 15 mm dia & 450 mm long with PTMT nuts with 32 mm dia brass chromium plated bottle trap and waste coupling complete all as specified and as directed by Engineer-in-Charge. Make : Hindware / Parryware / Jaquar

S&F in repair Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook complete all as specified and as directed by Engineer-in-Charge. Make : Cat Part No ALD-565 of Jaquar or equivalent in Hindware / Parryware

S&F in repairs mild steel chromium plated grating (round) 125/150mm dia fixed over floor/nahani trap (with hole and without hole) complete all as specified and as directed by Engineer-in-Charge.

S&F Refletive/ Radium marked strip made of Radium based material mounted/ pasted in Anti skid tape , complete all as specified , including removing of existing brass strip, incl making good to the surface of disturbed portion complete all as specified and as directed Eng-in-Charge. Note : Brass Strips removed should be weighed and taken to Schedule of credit.

S&F vinicent blind including complete set all as specified and colour and design as approved of any description and pattern by GE. Make : Vista

Demolition to brickwork or stone/boulder masonry, built in cement mortar complete all as specified and as directed Eng-in-Charge.

Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed Eng-in-Charge.

M&L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and smooth w/o using extra cement in upto 4 storeys building complete all as specified and as directed Eng-in-Charge.

M&L applying two coats of cement base paint on walls, incl preparation of newly plastered surface complete all as specified and as directed Eng-in-Charge.

M & L for 35 mm thick Type C0 (1:3:6) (12.50 mm graded aggregate) set in CM (1:4) as in repairs Providing precast cement concrete louvres and jallies, including all mouldings and removing debris away Defence land complete all as specified and as directed Eng-in-Charge.

M & L in repairs for 35 mm thick Type C0 (1:3:6) (12.50 mm graded aggregate) set in CM (1:4) as in repairs Providing precast cement concrete louvres and jallies, including all mouldings and removing debris away Defence land complete all as specified and as directed Eng-in-Charge.

M & L for Demolition of concrete, Kota stone and the like in ground floors and pavings not exc 15 cm thickness (below or above ground level) and taking out debries out side MOD land complete all as specified and as directed Eng-in-Charge.

M & L for Machine pressed precast concrete interlocking paver block as in repairs any shape and size confirming to IS 15658 -2006 of 80 mm thickness M-40 Grade incl 75 mm thick Cement concrete type D-2,(1:3:6) (40mm graded aggregate) as in sub floors, sub bases , floors and pavings/ paver blocks etc. including Removing debris out of defence land complete all as specified and as directed Eng-in-Charge.

M & L for Fine aggregate (Sand) for cushioning as in interlocking paver blocks laying complete all as specified and as directed by Engr-In-Charge.

M & L for Chequred cement concrete tiles (25cmx25cm x25mm ) thick with as in repairs white cement and pigment in floors etc set jointed and pointed in neat cement slurry over and incl 15mm thick screed in CM (1:6) incl Removing debris out of defence land complete all as specified and as directed Eng-in-Charge.

M/s. Kansal Construction Co.

JAIPAL AND BROTHERS

Ashish Sehgal and Co.

M/S PRADEEP ENTERPRISES

Hindustan Co.Co

J D ENTERPRISES

Mahesh Enterprises