SPECIAL REPAIRS TO BLDG NO P 197 (FOLLOWER BKS FOR 12 MEN AND TOILET BLOCK) AT MI LINE UNDER GE (NORTH) BANGALORE

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of (Fe- 290 Gde E- 165) complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of sheet of any type and any thickness complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of sheet of any type and any thickness complete all as specified and directed.

S & F 4mm thick non asbestos fibre cement building boards including anodised aluminium snap grid frame work of size of grid 605 x 605mm for false ceiling fixed or laid/ inserted to timber/GI/Aluminium framework with screws including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including taking down old celing of any description complete all as specified and directed.

Demolition of brick wk or stone/boulders masonary built in cement mortar incl all quoins arches pillars etc but excl ashlar facing, dressed stones work and precast concrete articles complete all as specified and directed. .

M&L for Pre-cast cement concrete block type C1 , 1:3:6 (20mm aggregate) masonry with solid blocks , exc. 10cm in width andsetting in in CM 1:6 ,complete all as specifid and as directed.

Taking down cement plaster of any description including racking out joints, hacking for key and disposal of debris to out side MD land all as specified and as directed.

M&L for Rendering 15mm thick in CM 1:6 on brick or concrete surfaces , finished even and smooth with out using extra cement.(Internal Surfaces) complete all as specified and directed.

M&L for rendering 15 mm thick in two coat (10mm in CM 1:6 + 5mm in CM 1:4) on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 with WPC, finished plastered surface even and smooth without using extra cement Note :- WPC will be measured and paid separately

M&L for rendering 5 mm thick on ceiling /RCC surfaces in cement mortar 1:3, finished plastered surface even and smooth without using extra cement complete all as specified and directed.

Preparation of newly plastered surfaces and applying two coats of cement base paint over one coat of primer on walls including in narrow widths/ bands etc complete all specified and as directed.

Preparation of newly plastered surfaces and applying two coats of oil emulsion distemper over one coat of primer on walls including in narrow widths/ bands etc complete all specified and as directed.

M & L for preparing newly plastered walls surfaces and applying three coat of white wash complete all as specified & as directed.

M & L for preparing newly plastered ceiling surfaces and applying three coat of white wash complete all as specified & as directed.

Taking down chowkat (without taking of shutter from the frame including grill) not exc 1.5 sqm each including making good the disturbed surface in PCC 1:2:4 type B0 or CM 1:3 all as specified and directed

All as per Item No 16 above, but exc 1.50 sqm and not exc 4.00 sqm each

S & F 2nd class hard wood plain, solid, straight chowkats and frames, clean sawn, frame rebeated on the solid , rounded or chamfered, put tegether with glue pinned at joints etc complete all as specified and as directed

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed.

S & F factory made plain framed, panelled shutter (two panel) of 35mm thick with lock rail and panel of 9mm BWP commercial ply or 12mm venereed particle board with commercial veneering on both faces. rail and style are of 2nd class hardwood & The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treateds fixed to chowkhat complete all as specified and directed.

S & F 2nd class hard wood 35 mm thick made glazed and skeleton shutters open rebated and prepared to receive glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified and as directed Note: Supply only 4 mm thick sheet glass and wire mesh be measured and paid separately.

S & F for mild steel work as in hold fast made in flat iron complete all as specified and directed.

M & L for plain cement concrete for fixing hold fast type B1,1:2:4 using 20mm grade stone aggregate complete all as specified and directed.

S&F Powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 ono.) complete all as specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F Sheet glass 4mm thick ordinary quality and glazing with oil putty or in wooden /steel /aluminium /rubber beading in square not exceeding 0.5 Sqm in each pane and complete all as specified and directed.

S&F figured glass pin headed type 4mm thick ordinary quality and glazing with oil putty or in wooden /steel /aluminium /rubber beading in square not exceeding 0.5 Sqm in each pane and complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia and average width of aperture 1.40mm and fixed with tinned tack or galvanized wire staple complete all as specified and directed.

S & F Butt hinges medium weight, cold rolled mild steel 100mm long and fixed to door frame and shutter duly welded/screwed complete all as specified and as directed

S & F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed

S & F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed

S&F Aluminium anodised tower bolt 150mm long of extruded section etc complete all as specified and as directed

S&F 125 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed

S & F 300m mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed .

S & F 140 mm floor door stopper of aluminium alloy powder coated, with hard down steel spring all as specified and as directed.

S & F mild steel 300mm, ordinary rat tail rod pattern springs,including roller and roller plate complete

S&F in repairs stainless steel decorative curtain rod of 20 mm bore with wood finishes (weight not less 300 gms per running meter) including fancy finale caps etc complete all as specified and as directed

S&F in repair Bracket for curtain rod of dia 20 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long including wooden base etc complete all as specified and as directed

M&L preparing new wooden surface of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed

M & L applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces over 10 cm width or girth including preparation of new steel surfaces complete all as specified and directed.

Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed.

M & L providing 25 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in subbase complete all as specified and directed. .

M&L Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors/Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 20 mm thick in CM 1:4 for laying floor finishes all as specified and as directed.

M&L Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl Screed bed or bedding layer of mortar 20 mm thick in CM 1:4 for laying floor finishes including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as spesified.

M & L Glazed ceramic tiles in vertical surfaces 350 x 250x 7 mm/ 450 x 350 x 7 mm/ 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over & incl 10mm thick in screed CM 1:3 on brick work or concrete surfaces to receive wall tiles including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as spesified.

Taking down of existing Water Proofing treatment of any type (APP Membrane,Cement or earthen tile,Mud phuska or lime concrete) including cement plaster of any thickness and removing bitumen coating/mud pushka dirtsetc over original RCC roof slab by grinding, Picking, sweeping clean and washing down with water to remove dust & to providing water prooling treatment complete. Note : Rate includes for removing debris outside defence land

Demolition & removal of cement concrete/padding concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed Note : Rate includes for removing debris outside defence land

M&L providing cement concrete type B0 ,1:2:4 (12.50mm graded stone aggregate) in copings, parapets and railing upto 60cm height, leveling concrete for Roof slab, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L Rendering 10mm thick in CM 1:3 on fair faces of brick or concrete wall surfaces finished smooth and even mixed with water proofing compound @ 3% by weight of cement or as per manufacturers instructions complete all as specified and as directed by Engineer - in -Charge. (Note:- Water proofing compound shall be measured and paid separately)

Supply only liquid water proofing compound

M&L for cleaning the plastered/concrete surfaces with wire brushes and applying water proofing treatment as under: (a) Apply bitumen primer at the rate of 0.27 litre per Sqm as per IS 3384-1986 and bonding bitumen of VG-10 @1.20 Kg per Sqm. (b) APP modified water proofing memebrane as per IS 16540/16532-2017 mineral finish, 3mm thick and weighing not less than 3.80 kg per Sqm reinforce polyster/HMHDPE matt black finish over compatible primer/bonding bitumen and finish the top surface with bituminus aluminium paint @0.10 Ltr per Sqm complete all as specified.

Dismantling water tanks and removing to store (exc 250 and not exc 500 ltr capacity)

M & L for 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including 20 mm dia ball valve, 02 Nos 20mm Nipple and fittings, complete all as specified and directed.

Supply & laying 20 mm outer dia CPVC pipes SDR 11 ( Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings and specials including taking down 15 mm GI tubing and connections complete all as specified.

Supply & laying 25 mm outer dia CPVC pipes SDR 11 ( Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings and specials including taking down 20 mm GI tubing and connections complete all as specified.

S & F in repairs 25mm CPVC gate valves, with lever , screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F in repair Vitreous china wash down water closet pan ( pedestral Pattern) white, (Including flushing cistern and flush pipe ) , including connection to drain & or out going pipe ) and to flushing pipe, anti syphonage pipe, seat and cover for pedestral pan including PVC flushing cistern and 450 mm long PVC connection etc. complete all as specified and directed.

Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC SWR P trap 10 litr PVC flushing cistern,600 mm long PVC connections connecting to flush pipe and to anti syphonage pipe, etc. complete including making good to floor, fixed in repairs complete all as specified and directed.

S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm including 32 mm dia brass waste coupling ,chromium plated fancy type pillar taps, PVC connection & brackets including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing & supply and waste pipe.complete all as specified and directed.

S&F in repairs Vitreous China half stall urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe ) but including Concussive push button taps of cast copper alloy, screwed for iron pipe, PTMT waste coupling suitable for urinals, (Minimum weight 32mm-45gms), urinal spreader and 450 mm long PVC connection complete all as specified and as directed.

S&F in repairs vitreous china urinal partition white of size 310x700 mm complete all as specified and as directed.

S & F in repairs PVC 600mm long corrugated waste pipe, 32mm dia, for WHB, urinal etc, complete all as specified and as directed.

S & F in repairs Towel rail stainless steel glossy finish complete all as specified and as directed.

S&F in repairs Soap dish chromium plated brass all as fixed in wall as per manufacturers instruction.

S&F in repairs two way bib cock 15mm with angle valve combination brass chromium plated,complete all as specified and directed.

S&F in repairs bib tap 15mm, standard of CP fancy type,chromium plated any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F 15mm stop valves (concealed type) cast copper alloy, screwed down, high pressure, fancy type,chromium plated screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and directed.

S & F 15mm stop valves/ angle valves cast copper alloy, screwed down, high pressure, fancy type,chromium plated screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and directed. .

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position including taking down old complete in all respect as specified.

S & F in repair 75mm dia PVC(SWR) floor trap,plain with grating including jointing with slvent cement all as specified and as directed.

S & F in repair 75mm dia PVC(SWR) multi floor trap,plain with grating including jointing with slvent cement all as specified and as directed.

S & F in repair 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/laid in trenches including necessary fittings all as specified and as directed.

All as per item No 1.75 here-in-above but 110 mm dia .

S & F in repair 75mm dia PVC (SWR) bends of any radious complete all as specified and directed.

All as per item No 1.77here-in-above but 110mm dia

S & F in repair 110mm dia PVC (SWR) junction single(single T) equal or unequal with access complete all as specified and directed.

S & F 125mm dia brass chromium plated shower rose with swivel joints fixed in repairs complete all as specified and directed.

S&F in repairs Toilet paper holder fixed in wall as per manufacturers instructions complete all as specified and directed.

Preparation of old decorated surfaces and applying one coat of white wash on walls including in narrow widths/ bands etc complete all specified and as directed.

Preparation of old decorated surfaces and applying one coat of white wash on ceilings including in narrow widths/ bands etc complete all specified and as directed.

Preparation of old painted surface and applying one coat of synthetic enamel paint on steel and iron surfaces over 10cm width or girth all as specified and as directed.

Preparation of old decorated surfaces and applying one coat of oil emulsion distemper on walls all as specified and directed.

Preparation of old surfaces including brooming down with steel wire brushing scrapping down soot’s, moulds, moss and efflorescence, salts ,treating oil and greasy spots etc and applying one coat of cement base paint at any position complete all as specified and directed.

Dismantling of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed.

M & L providing 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in subbase complete all as specified and directed.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set ,jointed and pointed in neat cement slurry in floors.(with grey cement and pigments) over 20mm screed bed or bedding layer of mortor in CM 1:6 complete all as specified and directed.

Excavation in trenches in hard/dense soil, not exc 1.5 mtr wide and n exc 1.5 mtr in depth; for laying of cables/errection of pole etc complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm of hard/dense soill complete all as specified and directed.

Removing of excavated soil to distancenot exc. 1.5 mtr above the starting point complete all as specified and directed.

M & L clean dry sand laid in trenches/duct for cushioning with a layer of river sand 23 cm thick under and above the cable complete all as specified and as directed.

Supply and lay burnt bricks of class 'B' laid dry across in trenches for cable protection complete all as specified and as directed.

S & F in repairs GI pipe light grade 40 mm bore with all accessories for cable protection fixed on poles/ bldgs of laid in trenches including necessary MS clamps, bolts and nuts etc complete all as directed.

S & F in repairs GI pipe medium grade 25mm bore with all accessories laid in trenches/ walls /Roads for cable protection etc complete all as directed.

S & F in repairs GI pipe medium grade 20mm bore with all accessories laid in trenches/ walls /Roads for cable protection etc complete all as directed.

S & F in repairs of Gun metal gate valves of size 20mm dia , with iron wheel complete all as specified and directed.

S & F in repairs of Float valve of size 20mm dia with PVC body, aluminium float rod , nylon float high pressure type complete all as specified and directed.

Supply and fixed in repairs and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of cross sectional area 25 Sqmm, 3.5 core laid in trenches / wall complete all as specified and as directed..

Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, socket or power) complete including fittings such as switches ceiling roses, pendants, regulators, sockets light fittings, fans etc and making good the disturbed surface of walls, ceiling etc incl painting with same colour of the back ground complete all as specified and as directed.

Wiring complete with 1.5 Sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded with copper conductor conforming to IS 694 drawn through and incl non-metalic rigid PVC conduit incl accessories surface type/ concealed run on walls/ ceiling incl MS terminal boxes fabricated with 1.6 mm thick MS sheet surface mounted/ concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., including provision of 1.5 Sqmm PVC insulated single core multi stranded FRLS copper conductor cable as earth continuity conductor and connecting to common earth dolly, One light point/Fan Point controlled by one switch all as specified and as directed.

All as per item No. 2.13 here-in-before but one fan/Exhaust fan point controlled by one switch/regulator

All as per item No. 2.13 here-in-before but one 3 pin socket out let 5 Amps on independent board

All as per item No. 2.13 here-in-before but one 3 pin socket out let 5 Amps on same board

Wiring complete with 2.50 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and including non-metallic rigid PVC conduit medium grade ISI marked including accessories concealed type modular type run on walls/ ceiling including MS terminal boxes fabricated with 1.6 mm thick MS sheet concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., including provision of 2.50 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed. Note for Item No 2.13 to 2.17 :- (i) The earth wire for the points in the same circuit can be looped from point to point. (ii) Earth wire shall be taken inside the conduit. (iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring. (iv) Quoted rate is inclusive of cutting chases as required at site.

Supply and Fixed ceiling rose, surface bakelite type 65 x 50 mm, 2 to 3 terminals complete all as specified and as directed.

S&F of switch piano flush type single pole one way 5 Amps complete all as specified and as directed

Supply and fix switch Socket combination 2 in 1, 3 pin 6 and 16 Amps flush type universal all as specified and as directed.

Supply and fix Socket outlet 2 in 1, 3 pin 5 A all as specified and as directed.

Supply and fix switch Socket combination 5 pin 2 in 1, 5A flush type all as specified and as directed.

S & F of stepped type electronic fan regulator flush switch type complete all as specified and directed.

S&F LED batten suitable for indoor applications 20 Watts, 4 feet with extruded aluminium housing & integrated LED channel complete with all accessories including taking out old fitting complete all as specified and directed. Make: Bajaj Cat No. BCLSBAL 20W CW or equivalent Makes specified in PS .

S&F LED batten suitable for indoor applications 10 Watts, 2 feet with extruded aluminium housing & integrated LED channel complete with all accessories including taking out old fitting complete all as specified and directed. Make: Bajaj Cat No. BCLSB 10 WH or equivalent Makes specified in PS .

Supply and Fixing 2 X 2 Recess mounted LED Luminaire 36 Watts white powder coated CRCA housing with LEDs seamless front frame with flate white high transmission arcylic cover complete with all accessories all including taking down old fittings complete all as specified and as directed. Make: Bajaj cat No. BZSSQL 36W WH or equivalent makes as per PS.

Material and labour for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 metre connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles, check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion incl earth work and excavation in any type of soil plain cement concrete (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways including funnel with watering pipe wire mesh and lugs, including test point and tacking down old earthing complete all as specified and as directed.

Supply and Fixed in repairs of MCB DB TPN 4 way suitable for MCCB TPN as I/C with double door type 415 volts with 200 Amps rated bus bar for housing MCBs as specified and as directed.

Supply and Fixed in repairs of MCB DB SPN 8 way double door type 240 volts with 200 Amps rated busbar as specified and as directed.

Supply and Fixed in repairs of MCB SP 240 volts 5 to 32 Amps complete all as specified and as directed.

Supply and Fixed in repairs of MCB SPN 240 volts 32 Amps complete all as specified and as directed.

Sub main wiring complete with two runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 4 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through existing non metallic rigid PVC conduit and conduit accessories incl removing of the existing sub main wiring all specified and as directed.

Taking down U/S / old vintage ceiling fan, cable , dismantling blades and deposit to MES store complete all as specified and as directed.

Supply and fix ceiling fans with three blade, down rod, accessories 230V, 1200mm sweep, with squirrel cage induction motor complete all as specified and directed. Make: Havells/ Bajaj/ CG / Havells / Orient

M&L down rod for ceiling fan upto 1.5 metres including nut, bolt, washers complete accessories all as per site requirement complete all as specified and as directed.

Supply and Fixed in repairs of Exhaust fans AC single phase 230/240 V of size 300 mm sweep with louvers fixed outside with all accessories and fixing the exhaust fan from ceiling rose with 3 coreflexible copper wire 24/0.20 sqmm, etc complete all as specified and directed. Make: Bajaj cat No. 70069, MAXX AIR or BZRSQL 36W GZiWH or equivalent makes: Havells /CG / Orient

Supply and Fixed in repairs of LED 30 Wbuilding security light having high power LED with pressure die cast housing prismatic polycarbonate diffuser, IP 66 protection ingress protection and impact resistance of IKO8, 4KV inbuilt surge protection with top opening driver cover for easy maintenance. complete all as specified and directed. Make: Bajaj Cat No. BCLST 30W LED or equivalent Makes:Havells /CG .

Supply and Fixed in repairs of Bracket made out of GI tubing medium grade 32mm bore, approx length 1.5 metres long including MS clamps made out of MS flat iron 25x6 mm, nut, bolt, washers etc. and including before fixing applying two coats of aluminum paint over a coat of red oxide primer complete all as specified and as directed.

S & F MCCB 4 pole 415 volts 100 Amps 16KA, fixed type including taking out old unserviceable MCCB complete all as specified and as directed.

Eeguchi Constructions

P M Constructions

RK Builders

Shanthi Construction