Additional alteration of MC building near Riksha Shed Tarahall Kaithu Shimla ward No 3 SH Fabrication of trusses prepainted sheet roofing and sanitary work etc

Amount

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of 5 mm thick chequered plate wherever required, all complete including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

P/F M.S grills of required pattern in framed of windows etc. with M.S flats square or round bars etc. Including priming coat with approved steel primer all complete including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia nominal bore including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

P/F G.I / M.I union (15 mm nominal bore) (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

P/F Gate Valve 15 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and Laying PVC pipes 100 mm dia B-Type (inc all accessories) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

P/F PVC Collar 100 mm (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

P/F PVC Plain Bend 100 mm (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

P/F P.V.C. Door bend 100 mm (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

P/F PVC Plain Tee 15 mm dia (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

P/F PVC Door Tee 100 mm dia (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

P/F PVC Floor trap 100 mm dia (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing water closet squatting pan (European type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: White glazed fire clay kitchen sink of size 600x450x 250 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing unplasticised P.V.C. Connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and Fixing 32 mm dia PVC waste pipe for wash basin or sink for approved quality including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge

Providing and fixing CP grating 100 mm dia for approved quality including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

P/F CP Brass Bib tap 15 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing C.P Brass Pillar Tap 15 mm nominal bore including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing CP Brass towel rail complete with CP brass bracket fixed to wooden plug with CP Brass Chrome plate including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing CP brass soap dish with CP brass bracket fixed to wooden cleats with brass screws chrome plate including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 coarse sand): 8 graded stone aggregate 40 mm nominal size) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

15 mm cement plaster in single coat on fair side of brick/Concrete /stone walls for interior plastering up to all floor level including arises internal rounded angles chamfers and or rounded angles not exceeding 80 mm in grith and finished even and smooth in cement motar 1:6 (1 cement : 6 Sand) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

6 mm cement plaster to celling in cement mortar 1:3 (1 Cement :3 sand) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: water thinable cement primer including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Finishing walls with weather proof water based acrylic Emulsion of apex asian paint/Nerolac paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 Sqm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class D/wood including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade-I) or graded wood particle board IS :3087 marked to frame backing or studding with screws etc complete (Frames backing or studding to be paid separately) 12 mm thick including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

P/F Pine wood Planks for Ceiling & Panelling 0.10 to 0.12mm thick with Planks over Lapping each other and jointed with screws (framed work to be Paid seprately) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Polishing one coat with french polish on previously polished wood and wood based surfaces to give an even surface including cleaning the surface of all dirt dust and sand papered smooth and including a coat of wood filler including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 40 mm thick 2nd Class D/Wood including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing aluminium Handle, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 125 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing bright finished brass hard drawn hooks and eyes :150 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing & fixing wire gauze shutters using galvanised M.S Wire gauge of average width aperature 1.4 mm in both direction with wire of 0.63 mm dia for door window and clerestory windows with hinges and necessary screw D Wood including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing aluminium handles hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 As Per is 1868) transparent or dyed to required colour and shade with necessary screws etc complete single rubber stooper including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x2 m size with top and bottom rail of T-iron 40x40x6 mm with 40 mm dia steel pulley complete with bolts nuts locking arrangement stppers handles including applying a priming coat of approved steel prime including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing PVC water storage tank syntax or equivalent three layer cost of connecting / tank nipples , making connection etc. 1000 litres capacity including all assecories. including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size). including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

VEENESH THAKUR (BID ID -587725)

BHUPENDER SINGH CHANDEL (BID ID -587780)