Construction of Science lab, Art craft room and Library at Govt. HR. SEC SCHOOL UKHRAL Zone UKHRAL Distt Ramban under PAB 2019-20

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 1 Osqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in:All kinds of soil (including all carriages lead and lift if any)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 fine sand : 8 graded stone aggregate 40mm nominal size) Crushed (including all carriages lead and lift if any)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level. 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) (including all carriages lead and lift if any)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed with 20% boulders (including all carriages lead and lift if any)

Centring and shuttermg including strutting, propping etc. and removal of form for Foundations: footings, bases of columns etc. for mass concrete. (including all carriages lead and lift if any)

Centering and shuttermg including strutting, propping etc.and removal of form for·Columns, Pillars, Piers, Abutments,(including all carriages lead and lift if any)

Centering and shuttermg including strutting, propping etc.and removal of form for·Lintels, beams, plinth beams, girders, bressumers and centilevers.(including all carriages lead and lift if any)

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 ( 1 cement : 6 fine sand) (including all carriages lead and lift if any)

Extra for brick work in superstructure above plinth level upto floor V level. (By manual means) (including all carriages lead and lift if any)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class kail wood (including all carriages lead and lift if any)

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,all complete as per direction of engineer- in charge.Second kail wood (including all carriages lead and lift if any)

Providing and fixing panelling or panelling and glazing inpanelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. coir veneer board (conforming to IS 14842) 12mm thick (including all carriages lead and lift if any)

Providing and fixing 35 mm thick wire gauze shutters _, using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws : Second class deodar wood. (including all carriages lead and lift if any)

Providing and fixing 35mm thick glazed shutters for doors, windows- and clerestory windows using 1.Okg/sqm (4mm thick) float of glass panes including lSI marked M.S. pressed butt· hinges bright finished of required size with necessary screws second class Kail wood (including all carriages lead and lift if any)

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coaton unexposed surface etc. complete2nd class teak wood 2nd class teak wood(including all carriages lead and lift if any)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size) (including all carriages lead and lift if any)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars. (including all carriages lead and lift if any)

15mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) (including all carriages lead and lift if any)

12 mm cement plaster 0n wall of mix 1:6 ( 1 cement 6 fine sand )Inside (including all carriages lead and lift if any)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. (including all carriages lead and lift if any)

Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete. (including all carriages lead and lift if any)

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand .: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mmthick with 20mm nominal size stone aggregate. Crushed. (including all carriages lead and lift if any)

Providing and fixing glass strips in joints of terrazo, cement concrete floor.40 mm wide and 4 mm thick 200 rm (LS)(including all carriages lead and lift if any)

Making plinth protection 50mm thick with cement concrete ( 1 : 3 : 6) 1 cement : 3 Coarse sand: 6 stone aggregate) 20 mm nominal size of stone aggregate over 75 mm bed of dry brick allast , 40 mm nominal size of well rammed and consolidated and grouted crushed (including all carriages lead and lift if any)

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and em beddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size )(including all carriages lead and lift if any)

Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :250x16 mm(including all carriages lead and lift if any)

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :100x10 mm(including all carriages lead and lift if any)

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :200x10 mm(including all carriages lead and lift if any)

Providing and fixing aluminium hanging floor door stopper lSI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :Twin rubber stopper(including all carriages lead and lift if any)

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm(including all carriages lead and lift if any)

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.100 mm(including all carriages lead and lift if any)

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied(including all carriages lead and lift if any)

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. (including all carriages lead and lift if any)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shadeNew work (two or more coats) over and ineluding priming coat with cement primer (including all carriages lead and lift if any)

Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) (including all carriages lead and lift if any)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work (including all carriages lead and lift if any)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all Zomplete.Fixed to openings wooden frames with rawl plugs screws etc. (including all carriages lead and lift if any)

Strctural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.(including all carriages lead and lift if any)

Providing corrugated G. S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required.0.63mm thick with zinc coating not less than(including all carriages lead and lift if any)

Providing ridges or hips of width 60cm overall width plain G.S.sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G. I. limpet and bitumen washers complete.0.63mm thick with zinc coating not less than (including all carriages lead and lift if any)

Providing and fixing hard board ceiling, sheet of approved quality with necessary nails etc. complete (frame work to be paid for separately) Standard Quality board 6mm thick (including all carriages lead and lift if any)

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :Second class kail wood (including all carriages lead and lift if any)

Electric wiring with 1.5 sqmm copper cable including 20 mm dia 2mm thick PVC pipe 5amp with sunken box and connection to the main pole complete as directed by engineer-incharge. (including all carriages lead and lift if any)

SHRI MUTAHIR AHMED MIR

FAYAZ AHMED NAIK

M/s Tanveer Ahmed

SAIF UD DIN MALIK

Bashir Ahmed Wani

Mohd Sharief Wani

Mohd hanief Wani

Dilber Sohil

Mohd Azam

M/S NAYAK CONSTRUCTIONS