SPECIAL REPAIR TO BLDG NO 25 (ENDOCRINOLOGY DEPTT) OF CH (CC) AND EARTHING OF LT SWITCH GEAR POLES INCLUDING CONNECTED ITEMS AT AREA OF MG ROAD UNDER GE E/M LUCKNOW

Amount

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified and directed.

S&F in 0.50 mm Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting made to any shape or Semi-ciruclar any colour having tensile strength of 550 Mpa as in roof covering/ cladding complete with tapping screw complete all as specified and directed.

All as per item No 2 above but plain sheet on ridge/gutters

Dismantling timber scantlings 40 sq. cm and over in section in framed work, in any position, complete all as specified and directed.

S & F for timber framed and fixed Second class hard-wood in scantlings with clean sawn, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

S&F rolled setion gde Fe 410 -W (Gde- E- 250) quality as in main and cross beams, hip and jack rafters,purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates incl. rivets or bolt & nuts, complete all as specified and directed.

M & L MS Nut & Bolt n.exc 12mm dia and length n.exc 5 cm long, complete all as specified and directed.

S & F Steel work in tubular trusses/post/rafter/purlin including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified and directed.

M&L for preparing new steel steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparing old steel steel surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.

M&L Suspended ceiling, comprising 12.5 mm thick reinforced gypsum plaster boards Conforming to IS-2095 , GI perimeter channels, intermdiate channels, etc. including finishing the exposed surfaces with Oil bound distemper two coats over and including 2mm thick Brila wall care putty complete all as specified and directed.

Taking down chowkhats with shutters(without taking off) of any description not exc 1.5 Sqm each, complete all as specified and directed.

Taking down chowkhats with shutters(without taking off) of any description exc 1.5 Sqm but nexc 4 Sqm each, complete all as specified and directed.

Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, ncluding drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (area not exceeding 2.00 sqm each), complete all as specified and directed.

All as per item No 16 above but area exceeding 2.00 sqm each

S & F for aluminium anodised extruded sections (conforming to IS) three track sliding window shutter with frames comprising series-C (20mm) , duly fitted with neoprene beading, glazing clipss, locking devices, sheet glass 4.8mm thickness in two shutters and 0.46mm dia with 1.40mm aperature wiremesh in one shutter complete all as specified and directed.

S&F for Aluminium anodised sections ( conforming to IS) door frames with single/double leaf shutters complete duly fitted with with frame of size 100mmx 44.45mm wide fabricated with 2mm thick section , shutter with 44.45mm wide fabricated with 2mm thick section having vertical, middle and top rail 83.50mm, bottom rail 115mm and neosprene rubber beading,heat absorbing glass panes 4.8 mm nominal thickness in top panel and 12mm thick particle board at bottom panel, Handle 2 Nos in each shutter, Aluminium tower 1 Nos in each shutter and necessary locking arrangement with mortice lock with duplicate key complete all as specified and directed.

S & F solid door frame of size 50mmx47mm made out of 5mm thick PVC sheet prelaminated on single side and plain on other side, reinforced with MS square tube including painting of edges to match with prelaminated sheet, fixed in opening as per specification & drawing, complete all as specified and directed.

S & F for factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struk, complete all as specified and directed.

S & F for 5.5mm thick ordinary Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and directed.

M&L plain cement concrete type B1 ( 1:2:4) using 20 mm graded stone aggregate as in lintels upto 1.5m clear span, cills,steps; seismic and other similar band, copings, covings bed plates, and like including weathering slightly rounded or chamfered angles, complete all as specified and directed.

S&F mild steel work as in hold fasts and similar articles conforming to Fe.290.Gde-E-165, complete all as specified and directed.

M&L for preparation of old wooden surface over 10cm width or grith & applying one coats of synthetic enamel paint of 1st quality complete all as specified and directed.

S & F aluminium anodized barrel tower bolt of extruded section, 150 mm long complete all as specified and directed.

S&F for 75 mm size butt hinges extruded brass with mild steel pin, bright polished type B11 medium weight, cold rolled, complete all as specified and directed.

S&F aluminium handle 125 mm size,cast type, anodised complete all as specified and directed.

S&F for 250 mm Aluminium alloy anodised,sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.

S & F (in repair) 20 mm dia fancy type drapery curtain rod made of mild steel duly PVC sleeved complete all as specified and directed.

S & F Powder coated brackets for fixing curtain rod of any dia and fixed complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) & removing & rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic tiles of 7-8 mm (square or rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar 1:4, complete all as specified and directed.

M&L for glazed colour joint free ceramic tiles of size 350x250x7mm/ 450x350x7mm thick any tint, on vertical surfaces set and jointed in neat cement slurry and pointed in white / coloured cement to match over and including 10 mm thick rendering on wall in cement mortar 1:3 complete all as specified and directed.

M&L for Dark shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) (double charged) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Taking down cement plaster on brick wall, racking out joints hacking for key scrubbing down with water complete all as specified and directed.

Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and pre cast concrete articles complete all as specified and directed.

M&L fly ash bricks, old size as per IS 1489 (Part I)-2002 buit in CM 1:6 straight or curved on plan exc. 6 M mean radius complete all as specified and directed.

M&L for rendering 10 mm thick on brick work/ concrete surfaces in cement mortar 1:6 on fair faces finished fair & even, complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work surface finished even and fair without using extra cement, complete all as specified and directed. (Note : Integral WPC shall be measured and paid seprately )

M & L for 5 mm thick rendering on concrete surfaces such as sides of roof beams, soffits of roof slab etc in CM 1:3 , finished fair & smooth w/o using extra cement, complete all as specified and directed.

Supply only integral water proofing compound powder ISI marked, complete all as specified and directed.

Preparation of newly plastered surfaces and applying two coat of oil bound disemper over one coat of oil base primer all as specified on walls surface incl a coat of 3mm Birla wall care putty, complete all as specified and directed.

M&L for applying two coats of exterior emulsion(weather coat of approved quality)/Apex paint over a coat primer on wall sufaces.Incl a coat of 2mm thick wall care putty over newly plastered surfaces including preparation complete all as specified and directed.

M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving n. exc 15 cm thickness (below or above ground level), complete all as specified and directed.

M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as plinth protection/path and the like complete all as specified and directed.

M&L for Cement concrete type D2 1:4:8 (using 40mm graded stone aggreages) as in foundations, filling, sub base in floors and mass concrete complete all as specified and directed.

S & F in repair virteous china wash down water closet pan (pedesatal patter) white (excluding fixing bolts, flushing cistern and flush pipe, complete all as specified and directed.

Taking down existing PVC water tank capacity exc 250 & n.exc 500 ltr and S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt I. capacity of tank 500 litres complete all as specified and directed.

S&F Ball brass valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule and fixed 20 mm bore pipe, complete all as specified and directed.

S & F in repair 20mm dia gun metal or gate valve with ironwheel head screwed both for iron pipe and fixed, complete all as specified and directed.

Cutting Chases, pining in, making good to facing where where required and pointing in cement martor 1:3 to ends or edges of landing , steps cills, sunshades, sheleves, lentels etc cutting chases for concealed water tubing or concealed wiring etc making good, cutting exceeding 10 cm but nexc 20 cm girth in brick walls, complete all as specified and directed.

Taking up or down steel tubing and connections 15 mm bore including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down steel tubing and connections 20 mm bore including cleaning for refixing or removal to store, complete all as specified and directed.

S&F tubes 15 mm bore "medium grade" with all fittings & fixed complete to wall and ceilings or laid in floor complete all as specified and directed.

S&F tubes 20 mm bore "medium grade" with all fittings & fixed complete to wall and ceilings or laid in floor complete all as specified and directed.

S&F in repair bib taps for 15 mm bore pipe cast copper alloy chromium plate with crutch or butterfly handle,screwed down, screwed for iron pipe and fixed, complete all as specified and directed.

S & F in repair Pillar cock high neck with surgical purpose elbow operataed screwed for iron pipe (bore of pipe 15mm), complete all as specified and directed.

S & F in repair PVC valveless, syphonic action type 10 ltrs flushing cistern low level white with inlet, ball valve float and handle incl brackets complete all as specified and directed.

S&F PVC connection for 15 mm bore pipe (Length 450 mm approx), complete all as specified and directed.

S&F(in repairs) CP brass tubular towel rail 20 mm dia and 600 mm long including brackets complete all as specified and directed.

S&F in repair angle valve two way cast copper alloy, fancy type, chromium plated with cup (concealed type) (bore of pipe 15 mm) complete all as specified and directed.

S&F for vitreous china standard pedestal white WHB with and including MS bracket complete all as specified and directed.

Supply only waste fittings, brass, chromium plated for glazed ware basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed (32 mm bore), complete all as specified and directed.

S&F vitreous china urinals, flat back of size 465mmX355mmX265mm, white with grating and union for discharge pipe complete all as specified and directed.

M&L for complete removal existing treatment and distempering walls with two coats of distemper oil emulsion white or tinted over a coat primer on wall sufaces.Incl a coat of Brila / JK wall care putty, complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coat of exterior paint over putty of avg thk 2mm incl preparation of surfaces on old wall surfaces complete all as specified and directed

Taking down pipes (any size) incl all fittings, complete all as specified and directed.

S &F 110mm bore (SWR) pipe single socketed in any length with rubber ring joints,fixed to walls, complete all as specified and directed.

All as per item No 72 above but dia of 75mm

S & F 110mm bore PVC(SWR) junction single (single Tee) equal or unequal with access door, complete all as specified and directed.

All as per item No 74 above but dia of 75mm

S&F 110mm bore PVC (SWR) bend of any radius, complete all as specified and directed.

S & F for 32mm bore Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, complete all as specified and directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.

Demolition of existing roof treatment of any type, complete all as specified and directed.

M & L for 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) , complete all as specified and directed.

M & L 15mm thick screed plaster on RCC slab CM 1:4 with using water proofing compound @ 3% by weight of cement, complete all as specified and directed. (Note : WPC to be measured and paid separately)

M & L for water proofing treatment on roof surfaces in the following manner:- (a) The surfaces shall be painted with hot bitumen grade 30/40 confirming to IS-73 @ 1.20 kg/sqm over a coat of bituminous primer conforming to IS-3384 @ 0.30 ltr/sqm. (b) supply & lay 3 mm thick APP water proofing membrane reinforced with non woven polyster matt laid using butane torch by torch on application with a side lap of 10 cm & 15 cm end lap weinghing not less than 3.5 kg/sqm. (c) Applying two coats of aluminium painting over APP membrane.

M & L for Super heavy series PVC Wall panelling/Lining consisting of 5mm thick Plain/wood colour PVC sheet as approved inclusive of solvent cement and fixing at site on PVC frame including complete fixing arrangments on wall complete all as per manufactures specifications, complete all as specified and directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

Taking down carefully aluminium conductor point wiring (light, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc. and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately)and making good disturbed surfaces of walls, floors, etc. to match with the existing good disturbed surfaces of walls, floors etc. match with the existing complete all as specified and directed.

M&L point wiring for one light/fan point controlled by one, one way switch by using 1.5 Sq mm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including PVC concealed conduits and conduit accessories/fittings, pressed steel terminal switch boxes, 3 mm thick Bakelite sheet top cover (ISI Marked) fitted with Chromium plate brass screws washers and 1.5 Sq mm nominal cross sectional area multistranded copper conductor green PVC insulated unsheathed earth wire and connecting to earth dolly complete all as specified and directed.

All as per item No 86 above but socket outlet point 5 amps on independent board

All as per item No 86 above but one socket outlet point on same baord

M&L point wiring for 15 amps socket point controlled by one, one way switch using 2.5 Sq mm nominal cross sectional area multi stranded copper conductor, PVC insulated FRLS unsheathed cables in and including PVC concealed conduit and conduit fittings including pressed steel terminal switch boxes and 3 mm thick plate for fixing of switches/sockets and fitted with Chromium plated brass screws & washers and1.5 Sq mm nominal cross sectional area multi stranded copper conductor, PVC insulated unsheathed earth wire and connected to earth dolly complete all as specified and directed.

S&F Polycarbonate switch piano flush type, SP,5/6 Amps, complete all as specified and directed.

S&F Polycarbonate switch piano flush type, SP, 16/20 Amps, one way equivalent of other specified make complete all as specified and directed.

S&F Polycarbonate socket out let 2 in 1 socket 5 pin, (6 Amps) flush type controlled by one switch, specified make complete all as specified and directed.

S&F Polycarbonate socket out let 6 pin, 20 Amps ISI Marked 20 Amps 240 Volts flush type, make complete all as specified and directed.

M&L Ceiling rose, Pilot 3 Plate ceiling rose 6A, complete all as specified and directed.

S&F Indian standard fan step regulator 100 watt, complete all as specified and directed.

S&F in repair Epoxy powder coated distribution box SPN 8 way, 240 Volts for MCBs, grouted flush to walls complete with IP 43 and metal double door complete all as specified and directed.

S&F in repair MCBs of the following rating and to be housed in DBs catered here in aftercomplete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCBs are including in unit rate of each MCB of any rating) (a) SP, 20 to 32 Amps, 240 Volts

All as per item No 97 above but SPN 32 to 40 Amps, 240 Volts

M&L for sub main wiring comprising two single core, 4 Sq mm nominal cross sectional area multi on same copper conductor cable, PVC insulated FRLS Grade unsheathed 1100 Volts grade drawing in and over PVC conduits and conduit fittings complete (concealed type) including S&F 4 Sq mm nominal cross sectional area on same copper conductor cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed. (Cutting chases and making good of disturbed surfaces shall deem to be including in the unit rate quoted by tendered). (Note :- Extra length of cables/wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly) Make of PVC insulated unsheathed FRLS copper cable

M&L for concealed sub main wiring comprising two single core, 10 Sq mm nominal cross sectional area multi on same copper conductor cable, PVC insulated FRLS grade unsheathed 1100 Volts grade drawing in and over PVC conduits and conduit fittings complete (concealed type) including S&F 10 Sq mm nominal cross sectional area on same copper conductor cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed. (Cutting chases and making good of disturbed surfaces shall deem to be including in the unit rate quoted by tenderer). (Note :- Extra length of cables/wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly)

M&L Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in to ground (earth pit) not less than 2.25 meters deep below GL with top edge of earth plate not less than 1.50 m below ground level, connected to GI lead wire of 4 mm dia. (7.50 m long) by means of nuts, bolts and washers, check nuts of GI and protected by the GI pipe light grade 1.5 mm nominal bore (7.50 m Long) for earth plead wire, watering pipe light grade of 20 mm nominal bore, 0.63 mm thick CI funnel, wire mesh etc complete including necessary earth work and excavation in any type of soil, PCC 1:2:4 type B1 earth pit and Precast RCC cover 50 mm thick dully reinforced with 6 mm dia, MS round bars @ 100 mm C/C both ways, earth testing point, making good to floor complete all as specified and directed.

S&F in repair plug and socket DBs with Single pole MCBs rated 20 Amps capacity all as specified or equivalent of other make including making niche in wall and mounted flush complete all as specified and directed.

S&F in repair Distribution Board TPN with and including of DPX MCCB 35 KA 125 Amps MCCB FP, as incomer and SP/TPN MCBs as outgoing protection class IP 54, 8 way (DPX 125+24) with metal door double door Cat No 420097 of Legrand or equivalent other specified Note :- FP MCCBs 35 KA 125 Amps1 No and 24 Nos MCB SP 32 Amps 230 Volts and Blanking plate shall be measured and paid under this this item )

Supply and fixing of Recess LED llight fittings of size 2X2 36 watt LED made of CRCA powder quoted finish with Fully Covered by PMMA Acrylic Lumio Diffuser, LED Used shall be SMD type and fixture including cutting and making false ceiling of any pattern/mtrl proper fixing of light in falce ceiling , electrical connection up to 15 feet height of various ward and dept complete all as specified and directed.

Supply and fixing flexible copper cable three core suitable for connection of light fittings/ FTL fittings of any type complete all as specified and directed.

S & F Lamp holder battern/Anguler type , PVC/polycarbonate type with cord grip cap suitable for pendant fittings, complete all as specified and directed.

Supply & fixing Ceiling fan 1200 mm sweep AC 230 volts single phase 5 star rated including making connection with three core PVC insulated 1100 volts grade multi stranded copper wire of appropriate size including testing complete all as specified and directed.

Supply & fixing Metal Body exhaust fan 300 mm sweep AC 230 volts single phase with louvers including making connection with three core PVC insulated 1100 volts grade multi stranded copper wire of appropriate size including testing complete all as specified and directed.

Supply & fixing Metal Body exhaust fan 450 mm sweep AC 230 volts single phase with louvers including making connection with three core PVC insulated 1100 volts grade multi stranded copper wire of appropriate size including testing complete all as specified and directed.

Supply and fixing in repair LED battern with LED Tube light rod 18 watt 4 feet retro type Fixing on wall/hanhing in ceiling complete all as specified and directed.

M & L for removal of of Window type AC and refixing same location after servicng /split type A/C up to 05 mtr distnce from existing location including copper pipe, cover , necessary gas charging fixsing on wallFOR All other connected civil work & other misc work reqd for installation od split AC for proper functioning complete all as specified and directed. (a) Additional length of copper tubes (upto 15 RM) for compressor inlet/outlet with insualting material

Dismantling of GI wire any type and any size complete all as specified and as directed.

Excavation in trenches in soft/Loose soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide and getting out complete all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and as directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

M & L for dry Sand cushioning in trenches for protection of cable including watering and consolidation complete all as specified and directed. (Note: Punned thickness shall be measured)

M & L fly ash bricks, old size as per IS 1489 (Part I)-2002 laying in trenches perpendicular to axis of the cable complete all as specified and directed.

Boring/drilling (Horizontly) manually/mechanically under existing road max 10 M in depth) suitable for passing GI Tubing 40 to 100 mm bore complete all as specified and directed.

Supply, laying jointing and testing LT UG cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured IS 7098 marked, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core, laid in trench/laid under floor or fixed naked with wall/on wall/in ducts/in GI pipes etc. with and includings MS Clamps, nuts,bolts,washers complete all as specified and directed. (Note- Excavation, earth works,and sand cushioning,protection bricks/tiles/blocks and pipe shall be measured and paid seprately under given items.)

All as per item No. 119 above but size 35 sq mm 3.5 core

All as per item No. 119 above but size 50 sq mm 3.5 core

All as per item No. 119 above but size 10 sq mm 2 core

Supply and laying or fixing or passing through pipe from junction box to street light connection, 1100 volts grade heavy duty cable with PVC solid insulated aluminium conductor served with an inner sheathing PVC tape and over all PVC sheathed 6 Sqmm 2 core nominal cross section complete all as specified and directed.

M&L Earth continuity conductor or main earthing lead laying to treanches & fixed to pole 4 mm dia galvanised iron wire complete all as specified and directed.

S&F Cable jointing kit for 1100 V (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core 25 to 50 sqmm XLPE armoured aluminium conductor complete all as specified and directed.

S&F Cable jointing kit for 1100 V (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core 70 to 95 sqmm XLPE armoured aluminium conductor complete all as specified and directed.

Supply and laying in trenches/Floor/road crossing or fixed to Pole/Wall GI pipe light grade ISI marked with fitting of size 40 mm bore for protection of cable including taking down existing pipe complete all as specified and directed.

Supply and laying in trenches/Floor/road crossing or fixed to Pole/Wall GI pipe light grade ISI marked with fitting of size 50 mm bore for protection of cable including taking down existing pipe complete all as specified and directed.

Supply and laying in trenches/Floor/road crossing or fixed to Pole/Wall GI pipe light grade ISI marked with fitting of size 80 mm bore for protection of cable including taking down existing pipe complete all as specified and directed.

Supply and laying in trenches/Floor/road crossing or fixed to Pole/Wall GI pipe light grade ISI marked with fitting of size 100 mm bore for protection of cable including taking down existing pipe complete all as specified and directed.

M&L for cutting of PCC/Hard standing/WBM road not exceeding 20 cm in width not exceeding 30 cm in depth for passing of LT cable and making good of disturbed surface to match with the existing surfaces by using old and new material i.e bitumen/PCC (1:3:6) type C-1(using 20 mm graded stone aggregate) complete all as specified and directed .

S&F in replacement wheather proof pole mounting junction box, base and door of junction box made out of SMC having outside dimention 333x233x120mm, inside dimention 300x200x105mm , single door front openable provided with hinged cover and locking arrangements with 4 Nos aluminium bas bar 63 Amps, mounted on porcelin insulator including M&L for MCB SP 10-1No, fixed on box in Din rail complete with electrical connection fixed to pole with suitable size FI clamp nut bolts and washer including embossing/painting of danger notice of size not less than 10cm x 7.5cm with letters, figures and conventional skull and bones in signal red colour on front face of junction box body complete all as specified and directed.

M & L for Earthing complete with galvanised steel earth plate electrode 6mm thick of size 600x600 mm buried directly and vertically in ground with top edge of the plate not less than 2.25 mtr from GL, connected with galvanised iron strip 32x6mm all as shown in Plate No-3, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2with RCC precast pit cover slab 400mmx400mmx50mm with handle for lifting made out of 8mm dia MS rod, funnel, wiremesh, 50 mm dia light grade GI tubing for protection of GI Strip 32x6mm, charcoal and salt in alternate 150mm thick layers around GI earth plate, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion complete all as specified and directed.

Supply drawing, connecting and testing in repair of 3 core, 1.5 Sqmm PVC insulated and PVC round sheathed` copper conductor (flexible ) industurial cable, 1100 Volts conforming to IS 694 in steel tubular poles from Junction box to street light fitting including providing suitable copper lugs complete all as specified and directed.

S&F rigid PVC line spacer, suitable for 2 wire, made from high grade PVC material, distance between phase to phase 300mm, suitabe for use with 1100 volts grade including taking down unsv one, complete all as specified and directed.

S&F rigid PVC line spacer, suitable for 5 wire, made from high grade PVC material, distance between phase to phase 300mm, suitabe for use with 1100 volts grade including taking down unsv one, complete all as specified and directed.

S&F in replacement Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections conforming to Fe-410-S grade including necessary nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape and size as directed and including applying two coats of aluminium paint (under & finishing coats) over a coat of red oxide zinc chromate primer on exposed steel surfaces, supplied and fixed in repairs, complete all as specified and directed.

m/s raghubar dayal