Civil works for the Construction of New customs office building

Amount

Laying and Jointing PVC Pipe. Heading

(SH : -1.0 - EARTHWORK) Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

Clearing the jungle including uprooting of rank vegetation, grass, brushwood, trees and saplings of girth upto 30 cm measured at 1m height from ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared as directed by the Engineer- in-Charge.

Felling trees of the girth(measured at a height of 1m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable materials as directed by the Engineer-in-Charge. Beyond 30cm girth upto and including 60cm girth

Earth work in excavation by means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within the site as directed by the Engineer- in-Charge. All kinds of soil

Earth work in excavation by means (Hydraulic excavator)/manual means over areas (exceeding 30cm in depth.1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed, as directed by the Engineer- in-Charge

All kinds of soil.

Ordinary rock

Hard rock (blasting prohibited)

Earth work in excavation by means (Hydraulic excavator)/manual means over areas (exceeding 30cm in depth.1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed, as directed by the Engineer- in-Charge but for every additional lift of 1.5m to 3.00m or part there of

All kinds of soil

Ordinary rock

Hard rock (blasting prohibited)

Filling available excavated earth(excluding rock) in trenches, under floors,plinth,sides of foundation,in areas etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering,lead upto 50m and lift upto 1.5m including cost and conveyance of all materials,labour charges, etc complete at all levels as directed by the Engineer-in-Charge

Filling in plinth or trenches, under floors, foundations, in areas etc with red earth including watering, ramming consolidating and dressing, cost and conveyance of all materials, labour charges, lead, lift etc complete at all levels as directed by the Engineer-in-Charge

Disposal of surplus excavated earth / building rubbish / malba / similar unserviceable,dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

(SH: - 3.0 - CONCRETE WORK) Providing and laying cement concrete of specific grade properly mixed and consolidated with hand rammers, including cost and conveyance of all materials, labour, curing, lead,lift , etc. complete for all work up to plinth level as directed by Engineer- in-Charge.

1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

1:2:4 (1 Cement : 2coarse sand : 4 graded stone aggregate 20mm nominal size)

Extra for providing and mixing water proofing compound in cement concrete work, masonry work, plastering etc in the proportion recommended by the manufacturers including cost and conveyance of all materials, labour, curing, lead, lift, etc. complete as directed by Engineer-in-Charge at all levels.

Providing and laying damp-proof course 50mm thick with cement concrete1:2:4 (1 cement: 2coarse sand (zone III) : 4 graded stone aggregate of 20mm nominal size) including cost and conveyance of all materials,labour charges,lead,lift etc complete at all levels as directed by the Engineer- in-Charge

Providing and applying a coat of residual petroleum bitumen of grade VG 10 of approved quality using 1.7kg per square metre on damp -proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil including cost and conveyance of all materials,labour charges,lead,lift etc complete at all levels as directed by the Engineer-in-Charge

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M-30 grade conforming to IS 456 or IS 10262 for reinforced cement concrete for sump, septic tank etc,using coarse sand conforming to IS 383 and 20mm nominal size graded hard granite groken stones, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in proportion of 0.5% of weight of cement (asper IS 9103) to accelerate,retard setting of concrete improve workability without impairing strength and durability as per direction of Engineer-in-charge. Minimum cement content is 340Kg/m3. All work upto plinth level.

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M-30 grade conforming to IS 456 or IS 10262 for reinforced cement concrete structural elements such as lintel, beam, slab, columns etc,using coarse sand conforming to IS 383 and 20mm nominal size graded hard granite groken stones, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in proportion of 0.5% of weight of cement (asper IS 9103) to accelerate,retard setting of concrete improve workability without impairing strength and durability as per direction of Engineer-in-charge Minimum cement content is 340Kg/m3. All work above plinth level upto floor V level .

Providing ,hoisting and fixing precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, slabs,brackets etc. including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 crusher sand), cost of required centering, shuttering etc complete but excluding the cost of reinforcement as per direction of Engineer-in-charge, with design mix cement concrete of M-25 grade conforming to IS 456 or IS 10262.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding with 16 gauge GI binding wire etc complete including cost, conveyance, lead, lift of all materials for all types of RCC works at all levels as per drawing/specification and as directed by Engineer-in-Charge.

Thermo-Mechanically Treated bars

Centering and shuttering including strutting, propping etc. and removal of form for :

Foundations, footings, bases of columns etc. for mass concrete.

Suspended floors, roofs, landings, balconies and access platform.

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Stairs, (excluding landings) except spiral staircases.

Edges of slab and breaks in floors and walls under 20 cms wide

Weather shade, Chajjas, corbels etc., including edges.

Walls of (any thickness)including attached pilasters butteresses plinth and string course etc.

(SH: - 5.0 - MASONRY WORK) Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc including scaffolding, raking out of joints,curing, cost and conveyance of all materials,labour, lead, lift, etc. complete for all types of masonry works as directed by Engineer-in-Charge.

Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc including scaffolding, raking out of joints,curing, cost and conveyance of all materials,labour, lead, lift, etc. complete for all types of masonry works as directed by Engineer-in-Charge.

Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level upto floor five level thickness 20cm and above in : CM 1:6 ( 1 cement : 6 coarse sand sand) etc including scaffolding, raking out of joints,curing, cost and conveyance of all materials,labour, lead, lift, etc. complete for all types of masonry works as directed by Engineer-in-Charge.

Providing and constructing 100 mm solid block masonry in CM 1:4 (1 cement, 4 crushersand) in partition walls, parapets, etc. with blocks of standard sizes and of approved quality (average compressive strength not less than7N/mm2) including scaffolding, raking out of joints, curing, cost and conveyance of all materials, lead,lift, etc.complete including providing 2 Nos. of 6mm dia bars as reinforcement at every third layer wherever specified (Reinforcement shall be measured and paid for under relevent item ) and as directed by Engineer-in-Charge.

Extra for providing and placing in position 2 Nos. 6 mm dia M.S. bars at every third course of single block masonry at all levels including cost and conveyance of MS bars etc complete as directed by Engineer-in-Charge

(SH: - 6.0 - JOINERY AND PARTITION WORKS ) Providing and fixing powder coated aluminium work for doors ,windows& partitions with extruded built up standard tubular sections/appropriate Z sections & other sections of approved make confirming to IS:733 & IS:1285 fixed with rawl plugs & screws or with fixing clips including necessary filling up of gaps at junctions,at top,bottom & sides with required PVC/neoprene felt etc.Aluminium sections shall be smooth,rust free,straight,mitred & jointed mechanically where ever required including cleat angle,aluminium snap beading for glazing/panelling,cp brass/stainless steel screws,removing the stickers clearly all complete as per architectutral drawings & directions of Engineer-in-Charge at all levels.(glazing & panelling to be paid seperately).Minimum thickness of powder coating for powder coated Aluminium shall be 50 micron For fixed portion

For shutter of doors ,windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings,exhaust fan of required size,etc wherever required including the cost of PVC neoprene gasket required(fittings shall be paid for separately)

Providing and fixing 12 mm thk prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade I Type II, in panelling fixed in aluminium doors,windows shutters and partition frames with C.P. brass / stainless screws etc complete as per architectural drawings and directions of Engineer in charge at all levels.Pre laminated particle board with decorative lamination on both sides

Providing and fixing glazing in aluminium doors,windows,ventilator shutters,partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directon of Engineer-in-Charge at all levels

with float glass panes of 5.5mm thickness

with float glass panes of 4.mm thickness

with pin headed glass panes of 4.mm thickness

Providing and fixing IS:3564 marked Aluminium die cast body tubular type universal hydraulic door closer of approved make with necessary accessories and screws etc complete as directed by the Engineer-in-Charge at all levels.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.With stainless steel cover plate minimum 1.25 mm thickness

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete including cost and conveyance of all materials,labour charges ,lead,lift etc complete as directed by Engineer in Charge.

Providing and fixing zinc alloyed (white powder coated) touch lock for aluminium sliding window with necessary screws etc. complete. including cost and conveyance of all materials,labour charges ,lead,lift etc complete as directed by Engineer in Charge.

Providing and fixing 200 x 10 mm aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete as directed by the Engineer-in-Charge at all levels.

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868)transparent or dyed to required colour and shade with necessary screws etc complete as directed by the Engineer-in -Charge at all levels. Single rubber stopper

Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete. including cost of all accessories, labour charges for fixing etc. complete as directed by the Engineer-in-Charge at all levels

Providing wood work in frames of doors, windows , clerestory windows and other frames, wrought frames and fixed in position with hold fast lugs or with dash fastners of required dia & length(hold fast lugs or dash fastener shall be paid separately) Second class teak wood

Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.

75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum board conforming to IS: 2095: part I

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Extra rate for providing etching on plain glass using 3 M chakra film or equivalant including cost and conveyance of all materials, all labour charges, lead, lift, sundries, etc., complete at all levels as directed by the Engineer-in-Charge.

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of crosssection 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.

Supplying and installation of moisture resistant/fire resistant 6 mm thick Heavy duty fiber cement board (High pressure steam cured) conforming to IS 14862:2000 of category III type B as per standard sizes fixed with self-drilling / taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge (Door handle, lock and stopper etc.to be paid separately).

Providing and fixing D type pull Handle of 350mm or approved size ,SS 304 grade with all fixtures and necessary screws etc.including cost and conveyance of all materials,labour charges,lead,lift etc complete as directed by the Engineer in Charge at all levels.

Providing and fixing corner lock of SS satin finish for Glass double door of approved size with necessary screws etc complete including cost and conveyance of all materials,labour charges,lead,lift etc complete as directed by the Engineer in Charge at all levels.

(SH: - 7.0 - STEEL WORK) Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, etc. including cost and conveyance of all materials, labour, lead,lift etc. complete as directed by Engineer- in-Charge at all levels.

In stringers, treads, landings etc of staircases including use of chequered plate wherever required, all complete

In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.

Supplying and fixing rolling shutters of approved make,made of required size M.S laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets,side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S top cover of required thickness for rolling shutters including two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, including cost and conveyance of all materials, labour charges,lead,lift etc complete as directed by Engineer in Charge at all levels. 80 X 1.25 mm M.S.Laths with 1.25mm thick top cover

Providing and fixing ball bearing for rolling shutters including cost and conveyance of all materials, labour, etc. as directed by the Engineer-in-Charge at all levels.

Extra for providing mechanical device chain and crank operation for operating rolling shutters.Exceeding 10.00 sqm and upto 16.80 sqm in the area

Steel work in built up tubular sections YST 310 grade as per IS: 4923 including cutting, hoisting, fixing in position, welded and bolted including special shaped washers etc. complete with electric resistance or induction butt welded tubes including painting with two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, closing all the open ends properly with same material cost and conveyance of all materials, labour, etc., complete as directed by the Engineer-in-Charge at all levels.

Providing and fixing S.S fan clamp of 16mm dia in RCC slabs, beams including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer-in-Charge at all levels.

Supplying and fixing 560mm diameter C.I. cover with frame(heavy duty) for manholes(Total weight of cover and frame to be not less than 220 kg including cost and conveyance of all materials, labour charges, lead, lift, all taxes, sundries, etc., complete as directed by the Engineer-in-Charge at all levels.

Providing and fixing stainless steel ( Grade 304 min 2.1mm wall thick) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

(SH: - 8.0 - FLOORING WORK) Providing and fixing full body Vitrified floor tiles 800x800 mm (satin finish)of approved thickness Ist quality conforming to IS : 15622 of approved make,shade,and pattern laid on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade .including cost and conveyance of all materials,labour charges,lead,lift etc, complete as directed by the Engineer in Charge (The purchase price (excluding GST) considered is Rs. 850/sqm- any deviation plus or minus in the purchase price will be adjusted in the price quoted.)

Providing and fixing Vitrified wall tiles in skirting,dados etc 800x800mm of (satin finish)approved thickness Ist quality conforming to IS : 15622 of approved make,shade,and pattern laid on 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade .including cost and conveyance of all materials,labour charges,lead,lift etc, complete as directed by the Engineer in Charge. (The purchase price (excluding GST) considered is Rs. 850/sqm- any deviation plus or minus in the purchase price will be adjusted in the price quoted.)

Providing and laying Antiskid Ceramic floor tiles 300x300x7 mm of Ist quality conforming to IS : 15622 of approved make,shade,and pattern laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.including cost and conveyance of all materials,labour charges,lead,lift etc, complete as directed by the Engineer in Charge at all levels.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacture of approved make in all colours , shades except burgundy, bottle green, black of any size as approved by Engineer-in- charge in skirting, risers of steps and dados over 12mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry@ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.complete as directed by the Engineer-in-Charge at all levels.

Cement plaster skirting 18 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement etc. complete as directed by the Engineer in Charge at all levels.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping,bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc., upto floor five level, excluding the cost of centering, shuttering and finishing:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Supplying and laying approved quality and size pressed cement tiles minimum 22mm thick in CM 1:4 (1 cement: 4 course sand),20mm thick including cost and conveyance of all materials and labour ,lead,lift,joints finished with white cement mixed with pigment of matching shade etc as directed by the Engineer in charge (colour of tiles,laying pattern etc to be got approved by the Engineer-in-Charge).

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite work including providing necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete as directed by the Engineer-in-Charge at all levels.

(SH: - 9.0 - FALSE CEILING WORKS) Supplying and fixing suspended PVC false ceiling system using 6mm thick 250mm wide Sintex SPUF 144A panels or equivalent including GI grid system as per manufactures specifications .The rate shall include cost and conveyance of all materials, labour charges, hire charges for scaffolding etc. complete for all levels and as directed by the Engineer-in-Charge at all levels.

Providing and fixing 12 mm thick frameless toughened glass of approved brand and manufacture, including making necessary holes etc. for fixing required fixtures for glass roof and fixed glasing, all complete as per direction of Engineer-in-charge

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recomme-nded jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with12.5 mm thick tapered edge gypsum moisture resistant board

Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.

(SH: - 10.0 - FINISHING WORK) 6 mm cement plaster to ceiling of mix 1:3 (1 Cement : 3 fine sand) including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer in charge at all levels.

12mm cement plaster of mix 1:4 (1 cement : 4 fine sand)including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer in charge at all levels.

15mm cement plaster of mix 1:4 (1 cement : 4 fine sand)including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer in charge at all levels.

15mm cement plaster of mix, 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement 2 kg/sqm including mixing water proofing material in separately).proportion recommended by manufacturer over roof at all heights including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer in charge at all levels. (water proofing liquid will be paid separately)

Applying one coat of water thinnable cement primer of approved brand and manufacture on all surface including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer in charge at all levels.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with acrylic smooth exterior paint for new work (Two or more coat applied @1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20kg/ 10sqm including cost and conveyance of all materials, labour charges, scaffoldings etc complete as directed by the Engineer in Charge at all levels.

Painting the inside walls with ready mix plastic emulsion paint of approved quality two or more coats to smooth even finish on ceiling and walls including cost and conveyance of all materials to site, labour charges, hire charges for scaffolding, etc as directed by Engineer-in-Charge at all levels

Painting with synthetic enamel paint two or more coats of approved brand on wood work of approved brand and manufactures to give an even shade including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer in charge at all levels.

Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and fixing one layer of GI chicken wire mesh of 24 guage including fixing with nails, etc. at the junction of brick masonry and RCC or at any other place including cost and conveyance of all materials, labour,scaffolding charges etc. complete as directed by Engineer-in-Charge, at all levels.

Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/ system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge.

Providing & Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone Pattern with anti algae and UV resistance properties to be applied as intermediate finish in desired pattern @ 43.04 kgs/10 sqm to form film of 1- 1.5 mm thickness after scrapping and properly cleaning the surface to remove loose particles from the plaster surface, followed by top coating with Premium Acrylic Smooth exterior paint with Silicone additives of required shade by two or more coats @ 1.43 litres/10 sqm, complete as the direction of Engineer -in-Charge.

(SH: - 13.0 - MISCELLANEOUS BUILDING WORK) Supplying, diluting and injecting chemical emulsion for PRE- CONSTRUCTIONAL anti-termite treatment: Treatment of soil using chemical emulsion by drilling 12 mm diameter holes upto 300mm depth at 150 mm center to center: With Imidacloprid 30.5% SC at 2.1 ml per litre of water as per IS 16131. The rate includes preparation of surface, treatment, cost and conveyance of all materials including chemical emulsion, labour charges,lead,lift etc complete as per manufacturer's specification and as directed by the Engineer-in-Charge. The above work shall be carriedout by an agency having sufficient experience and should ensure a service warranty of 10 years. Only skilled and experienced persons shall be employed for this purpose.

Providing and constructing soak pit 1.5 m x 1.5 m x 1.5 m size with honey comb brick work on the sides upto a height of 0.9m and brick masonry in CM 1:6 for the balance height,providing and filling brick bats graded, upto a height of 1.2 m,providing and laying precast slab over the pit supporting on the brick work, including cost and conveyance of all materials,labour charges, lead, lift, etc. complete as directed by the Engineer-in-charge.

SH :1.0 SANITARY INSTALLATION Providing & fixing of star white vitreous China European wall hung water closet with seat and lid with CP brass hinges and rubber buffers with ceramic cistern dual flush and accessories complete, testing and commissioning to the satisfaction of Engineer in Charge at all levels.Models-Jaquar LYS WHT 38851S220SM / Kohler Odeon K-17661K-S-0 or equivalent as approved by the engineer in charge

Providing and fixing under counter wash basin with C.P. brass pillar cock, 32 mm C.P. brass waste of standard pattern, bottle trap ,angle valve etc with all accessories valve,complete including CI/MS brackets duly painted, nuts, washers, etc. complete,cost and conveyance of all materials labour charges ,lead, lift necessary wall cutting / chasing and making good the walls,floors,slab,testing and commissioning to the satisfaction of Engineer in charge at all levels. Models (Jaquar FLS WHT 5701 / Kohler Caxton K2210IN-O + Jaquar ORP 10001PM/ Kohler K99452in-4-CP+ Jaquar ALD 075/Kohler K45433IN-CP+ Jaquar ALD 769L250X190 / Kohler K7314IN-CP+ Jaquar ORP 10053PM/Kohler K801541N-4-CP )or equivalent as approved by the engineer in charge

Supplying and fixing CP Health Faucet and angle valve with all accessories including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. Models- (Jaquar ALD 565+Jaquar ORP1053/Kohler K80154IN4CP) or equivalent as approved by the engineer in charge.

Providing and fixing CP brass body bib cock etc. complete including cost and conveyance of all materials labour charges ,lead, lift,including cutting and making good the walls,floors,slab,testing and commissioning to the satisfaction of Engineer in charge at all levels. Model:(Jaquar ORP 10037PM/Kohler K160931N4CP )or equivalent as approved by the engineer in charge. 15 mm nominal bore

Providing and fixing SS floor trap of 110mm outer dia including SS cockroach free floor grating with cup, PVC multitrap etc. complete, testing and commissioning to the satisfaction of Engineer in Charge at all levels.

Providing and fixing kitchen sink with C. I brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required:White glazed fire clay kitchen sink of size 600x450x250 mm

Providing and fixing premium quality C.P. brass shower and shower arm ,diverter etc of approved make and model including cost of all materials, labour etc., complete as directed by the Engineer in-Charge at all levels. Model (Jaquar OHS1989&SHA483&ORP 10193KPM&ALD 193/Kohler K23657INCP&K994711N4FPCP&K8801NCP) or equivalent as approved by the engineer in charge

Providing and fixing CP BrassTowel Rod 600mm as per the requirements of the Engineer in charge at all levels.Models -Jaquar ACN 1111SM or equivalent as approved by the engineer in charge

Providing and fixing C.P brass stop cock ( concealed and exposed parts) of standard design and of approved make conforming to IS: 8931 20 mm nominal bore. Models JaquarORP 10083KPM+ALD089 or equivalent as approved by the engineer in charge 20 mm nominal bore.

Providing and fixing SS cleanout etc. complete, testing and commissioning to the satisfaction of Engineer in Charge at all levels.(110 mm dia)

Providing and fixing SS cleanout etc. complete, testing and commissioning to the satisfaction of Engineer in Charge at all levels.(75 mm dia)

:Providing and fixing Cpbrass robe hook including making good the walls etc complete to the satisfaction of Engineer in Charge at all levels.(Models Jaquar ACN 1191N/ Kohler 56351N-CP or equivalent as approved by the engineer in charge at all levels)

:Providing and fixing CP/SS soap dish including making good the walls etc complete to the satisfaction of Engineer in Charge at all levels.Models Jaquar ACN 1131N/Kohler K5634IN CP or equivalent as approved by the engineer in charge

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing sink cock of approved quality conforming to IS: 8931. Models Jaquar FLR 5347IN/Kohler K994821N4CP or equivalent as approved by the engineer in charge

Providing and fixing wall wash basin with pedestal, C.P. brass pillar cock, 32 mm C.P. brass waste of standard pattern, bottle trap ,angle valve etc with all accessories valve,complete including CI/MS brackets duly painted, nuts, washers, etc. complete,cost and conveyance of all materials labour charges ,lead, lift necessary wall cutting / chasing and making good the walls,floors,slab,testing and commissioning to the satisfaction of Engineer in charge at all levels. Models (Jaquar FLS WHT 5701 / Kohler Caxton K2210IN-O + Jaquar ORP 10001PM/ Kohler K99452in-4-CP+ Jaquar ALD 075/Kohler K-45433IN-CP+ Jaquar ALD 769L250X190 / Kohler K7314IN-CP+ Jaquar ORP 10053PM/Kohler K801541N-4-CP )or equivalent as approved by the engineer in charge.

SH: - 2.0- WATER SUPPLY PIPING WORKS Supplying, fixing, testing and commissioning of Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work

50mm nominal dia

40mm nominal dia

32 mm nominal dia

Supplying, fixing, testing and commissioning of Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

62.5 mm nominal dia

50mm nominal dia

40mm nominal dia

32 mm nominal dia

25mm nominal bore

20mm nominal bore

Supplying, fixing, testing and commissioning of Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

40mm nominal dia

32mm nominal dia

25mm nominal dia

20mm nominal dia

15mm nominal dia

Providing and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end) including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer- in-Charge at all levels

50 mm dia

40mm dia

32mm dia

25mm dia

20mm dia

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Supplying and fixing C I Non return valve PN 16 with all accessories including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer- in-Charge at all levels 50 mm nominal bore

SH: - 3.0- SANITARY PIPING WORKS Supplying, laying, jointing, testing and commissioning of hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with clamps including earth work, refilling, ,testing the lines rectifying any leakages or defects,etc. complete for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for external works as directed by the Engineer -in-Charge

160mm OD(6 kg/cm2)

110mm OD(6 kg/cm2)

75mm OD(6 kg/cm2)

Supplying, laying, jointing, testing and commissioning to the satisfaction of Engineer in Charge of hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with clamps testing the lines rectifying any leakages or defects,etc. complete as directed by the Engineer-in-Charge for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for internal work-exposed on walls as directed by the Engineer in charge.

110mm OD(6 kg/cm2)

75mm OD (6 kg/cm2)

50mm OD (6 kg/cm2)

75mm OD (4 kg/cm2)

Supplying, laying, jointing, testing and commissioning to the satisfaction of Engineer in charge of hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with clamps including cutting and making good the walls,testing the lines rectifying any leakages or defects,etc. complete for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for concealed work as directed by the Engineer- in-Charge.

110mm OD (6 kg/cm2)

75mm OD(6 kg/cm2)

50mm OD(6 kg/cm2)

Supplying, laying, jointing, testing and commissioning Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 300mm dia RCC pipes

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

560 mm dia circular D.I. cover with square frame(heavy duty) for manholes

Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil and unserviceable material as directed, within a lead of 50 m

Pipes, cables etc. not exceeding 80mm dia

In all kinds of soil for pipes, cables etc exceeding 80mm dia but not exceeding 300mm dia.

Supplying, fixing, testing and commissioning to the satisfaction of Engineer in charge of PVC gully trap of size 160 x 110mm and CI grating 150mmx150mm size and water tight C.I cover with frames 300mmx300mm size(inside) the weight of cover to be not less than4.5kg and frame to be not less than2.7kg (CI MH cover and frame as per IS:1726) single sealed of size conveying to size the above mentioned items and constructing 30cmx30cm internal size gully trap chamber and depth upto 60cm,115 thk brick wall in CM 1:6 on a foundation of PCC 1:4:8.100mm thick plastering inside with CM 1:3,12mm thk with a neat cement flushing coat and conveying to site,cleaning ,installing and testing approved make PVC gully trap with 160mm outlet(Fabricated),surrounding with CC 1:1.5:3, 150x150mmm,top with CI grating above the PVC gulley trap and light duty CI cover and frame over the chamber including cost of all materials, etc complete as per approved drawing and as directed by Engineer-in- Charge

Providing and fixing PVC vent cowl to pipe already fixed as directed by Engineer-in-Charge at all levels.

110mm dia

75mm dia

Supplying and fixing of Centrifugal Monobloc pump, with CI construction, CI impeller complete with motor, base plate, foundation bolts, nuts, pressure guage and all accessories. and working with 415V, 3ph and 50 Hz frequency Head- 12 m Discharge-5 m3/hr

Supplying and fixing GM foot valve with all accessories including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer -in - charge at all levels. 50 mm dia

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

SRI RADHA CONSTRUCTIONS

VKS INFRATEC PROJECTS

CIS GLOBAL INFRATECH PVT LTD

Aakar Engineers and Contractors

G L PRASAD

Anish Infrastructure (Coimbatore) Pvt Ltd