PERIODICAL SERVICES TO SANGLI APARTMENTS, AHQ CAMP LODHI AND ECHS POLYCLINIC LODHI ROAD AND REPAIR AND MAINT OF SEWER LINE, MANHOLES AND CLEANING OF SEWER APPURTENANCES AT NDC AND RAKSHA BHAWAN UNDER GE NEW DELHI

Amount

M&L preparation of old decorated surfaces by washing scrapping down of old painted surface of wall including cornices & applying one coat of cement base paint on wall upto 12 M height incl necessary scafolding complete all as specified and as directed Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

M&L for preparation of old decorated surfaces by washing & scrapping down of old painted surface of wall including cornices & applying two coat of cement base paint on wall upto 12 M height incl necessary scafolding complete all as specified and as directed Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

M&L applying one coat of oil bound distemper on walls (old decorated) including cornices complete all as specified and as directed by Engr-in-Charge Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

M&L for applying one coat of weather proof exterior emulsion extra premium 100% acrylic emulsion upto 12 M height incl necessary scafolding complete all as specified and as directed by Engr-in-Charge Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

M&L preparation of old decorated surfaces by washing scrapping down and stopping of old painted surfaces of ceiling and apply one coat of white wash complete all as specified Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

M&L preparation of old painted wood or wood based surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

M&L preparation of old painted steel and iron surface of any description not otherwise described over 10 cm width or girth and painting with one coat of synthetic enamel paint upto 12 M height incl necessary scafolding complete all as specified and as directed by Engr-in-Charge Note :(a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates..

All as per srl item No. 9 above but two coats of synthetic enamel paint. Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc. upto 12 M height incl necessary scafolding and removal of debris out side of Mod Land

M&L 15mm thick Ready mix plaster on brick work or concrete surfaces of wall (Internal surface) finished even and smooth complete all as specified and as directed by Engr-in-Charge

M&L 15mm thick Ready mix plaster on brick work or concrete surfaces of wall (External surface) finished even and smooth upto 12 M height incl necessary scafolding complete all as specified and as directed by Engr-in-Charge

M&L 5mm thick Ready mix plaster on concrete surfaces on ceiling finished even and smooth complete all as specified and as directed by Engr-in-Charge

M&L for preparation of newly plastered surface of wall and applying two coat of cement base paint as approved over a coat of primer upto 12 M height incl necessary scafolding complete all as specified and directed. Note :(a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed by Engr-in-Charge Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

M&L for preparation of new plastered surface of ceiling and applying three coat of white wash complete all as specified. Note :(a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

Cleaning,Flushing of chocked and desilting of outdoor sewage lines n. exe 300mm internal diameter of any depth upto three meter. The cleaning shall be carried out with mechanized operation by means of diesal/electric operated vehicle mounted hydraulic operated high pressure suction cum jetting machines fitted with pump of requisite capacty and the sludge sucked out with super succer machine of required capacity and sent to storage tanks for further disposal to the authorised disposal site. the sludge deposited in the sewage ling shall be fully ceaned and disposed off the same outside the MoD land at any distance and without any additional cost on the same day when it was taken out. The job shall be carried out with safety precaution equipments and with strick supervision complete all as directed. Note:- The service proider/contractor during the mechanised operation shall be equiped with gas monitor, nylon rope ladder, torch light and compressor blower etc along with the sewage cleaning truck mounted suction/jetting machine. (b) Manual cleaning operation/scavenging is prohibited. (c) The unit rate quoted by the contractor shall deem to include the cost of providing skilled driver and operator and supervising Engineer including provision of water for jetting and removal of sludge/stilt/liquid/mud and sand (in fou position) etc.

Desluding of existing manholes of depth upto 2 mtr (vol of MH exc 0.20 cum but not exc 2.88 cum)for liquid, solids and slurry material by machanical means using hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of minimum 5000 ltr and suction tank capacity of 300 ltrs and 260 LPM with minimum 145 bar suction flow of 10200 LPM including skilled driver and operator and supervising Engineer including provison of water for jetting and removal of sludge/silt/liquid/mud abd sand (in foul position) etc removed to outside the MoD land/premises at any distance all as directed by engr-in-charge incluidng loading, unloading, digging outt pit of any size in any type of soil, surring sludge/stilt/spoil/mud etc into the pit and sprreying bleaching power over the entire surface complete. Note:- (a) The service provider/contractorduring the mechanized operation shall be equiped with gas monitor, nylon rope ladder, torch light and compressor blower etc along with the sewage cleaning truck mounted suction/jetting machine. (b) The cleaning shall be carried out with machanised operation by means of jetting machines and the sludge sucked out with super succer machine of required capacity and sent to storage tanks for further disposal to the authorised disposal site. (c) Manual cleaning operation/scavenging is prohibited. (d) The unit rate shall deem to include for all material, labour and skilled/unskilled) tools and plants and requisite quantity of water for the entire operation and transpotation arrangements.

Desludging including dewatering of septic tank/soak well in dia/ depth and manholes above 2 mtr in depth for liquid and slurry material and removing the sludge from the tank by machanical using hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of minimum 5000 ltr andsuction tank capacity of 300 ltrs and 260 LPM with minimum 145 bar suction flow of 10200 LPM including skiled driver and operator abd supervising Engineer including provition of water for jetting and removal of sludge/silt/liquid/mud and sand (in foul position) etc out side the MoD land/premises at any distance all as directed by Engr-in-Charge including loading, unloading digging out pit of any size in any type of soil, surring sludge/silt/spoil/mud tec into the pit and spreying bleaching powder over the entire surface complete. Note:- (a) The service provider/contractorduring the mechanized operation shall be equiped with gas monitor, nylon rope ladder, torch light and compressor blower etc along with the sewage cleaning truck mounted suction/jetting machine. (b) The cleaning shall be carried out with machanised operation by means of jetting machines and the sludge sucked out with super succer machine of required capacity and sent to storage tanks for further disposal to the authorised disposal site. (c) Manual cleaning operation/scavenging is prohibited. (d) The unit rate shall deem to include for all material, labour 9skilled/unskilled) tools and plants and requisite quantity of water for the entire operation and transpotation arrangements. (e) The measurement shall be included with depth of water and sludge/silt/mud.

Cleaning of manhole and removing the blockage sludge from manhole by manually with the help of bampos/rods/pipes incluidng rodding and flushing the water and dispose off the sludge out side of MoD land complete all as directed at site for any size, description of manhole up to 1.5 m internal depth.

Cleaning of sewer line and removing the blockage by manually with the help of bampoos/rods/pipes including rodding and flushing the water and dispose off tge sludge out side the MoD land upto 200 mm dia pipes complete all as specified and directed.

Cleaning of Gully trap, Nahni trap, Floor trap, WC,WHB,Urinal and sink by removing the sludge dispossed off from out of defence land by mannually or machanically cleaned with water complete all as specified and directed.

Excavation in trenches in any type of soil (Soft/disintegrated) n. exc. 1.5 M wide and n. exc. 1.5 M in depth for foundation for manholes/shafts or sewer line etc. n. exc. 10 sqm on plan & n. exc. 1.5 M in depth & getting out soft loose soil complete all as specified.

Demolition of cement concrete in ground floor and pavings not exc 15 cm in thick below or above ground level complete all as specified and directed

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete)set in cement mortor & removing demolished material out side defence land complete all as directed. (Bore of pipe 100mm).

M & L for SGSW drain pipe grade 'A' 100mm bore (internal) including laying in trenches and jointing in cement & sand morter 1:2 & testing complete all as specified.

M & L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggragated) as in bed including packing under & haunching against sides of SGSW drain pipe 100mm bore after they are laid & tested complete all as specified.

Returning filling in including spreading levelling, watering and well ramming soil in layers n. exc. 25 cm thick complete all as specified.

Removing excavated materials/surplus soil out side of defence land up to a total distance of 1.5 Km complete all as directed by Engineer-in-charge.

Demolition of brick work or stone/ boulder masonary built in cement mortar or cement lime mortar .

M & L for brick work with sub class B bricks straight or curved on plan exc. 6 meter mean radius built in cement mortar 1:6 all as specified and directed.

M & L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggragated) as in benchning, copings, channels, slightly chamfered or rounded on edge including necessary use of form work complete all as specified & directed at site.

Rendering 15 mm thick in cement mortar 1:4, on fair faces of brick work or cement concrete surfaces, finished even and smooth without using extra cement.

Taking down cement plaster on brick wall any description incl racking out joint, hacking for key, scrubbing down with water complete rubbish out of MOD land all as specified and directed.

Demolition of RCC manhole cover slabs and similar suspended work incl(reinforcement cut as required to facilitate demolition)

S&F precast RCC 1:2:4 manhole covers slabs any size, thickness with 3 mm thick FL around cover slab complete all as specified Make PPRC, polycrete including reinforcement as per manufacture design with frame complete all as specified and directed.

Cutting into existing manholes for connecting new drain making good to pipe and rendering cutting out existing benching for and forming channel (1/2 or 3/4 section) in cement concrete 1:2:4 type B1 using 20mm graded stone aggregate finishing smooth and refrming benching as required for 150 mm dia pipes complete all as specified and directed.

Cast Iron trap ''P'' for cast iron pipe of size 100mm, fixed in repair.

Cast iron floor trap of size 75mm, with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4:), fixed in repair.

S&F as in repair salt glazed stone ware gully trap of size 180X150 mm squire or rounded mouthed,type "P".

Dismantling of cast iran or reinforced concrete drain pipe 100&75mm bore,jointed in cement mottor and taking out of treanches if required

S&F Cast iron soil,waste and vent sand cast pipes pipes in any length with or without ears,with cement joints,laid in trenches or in floors of size 100 mm bore

S&F Cast iron soil,waste and vent sand cast pipes pipes in any length with or without ears,with cement joints,laid in trenches or in floors of size 75 mm bore

S&F Cast iron bends (any radius) with ducks foot or heel rest.of size 100mm bore of pipe.

S&F Cast iron bends (any radius) with ducks foot or heel rest.of size 75mm bore of pipe.

H.B. Traders

Veenu Builders

Mohit Infratech

M/S Ayub Khan

M/S Sunil Steel Works