REPAIR TO CHAJJA, FACIA, LEAKAGE SEEPAGE AND MISC B/R WORKS TO OTM AND MD ACCN IN ZONE-IV UNDER AGE B/R-IV OF GE(SOUTH) MEERUT CANTT

Amount

Material and labour for non skid glazed ceramic coloured tiles of size 400mmX400mm, 7-8mm thick as in floors, etc set and jointed in neat cement slurry and pointed in white/colour cement to match over and including 15mm thick screed bed in cement mortar (1:6) including dismantling of old tiles complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles (premium quality) of size 450mmX300mm, 7-8mm thick as in vertical surfaces, set and jointed in neat cement slurry and pointed in white/ coloured cement to match, laid over and including 10 mm thick rendering in cement mortar 1:4 including dismantling of old tiles complete all as specified and directed.

Material and labour for non skid ceramic floor tiles of size 600mmX600mm, 10 mm thick as in floors etc set and jointed in neat cement slurry and pointed in white/colour cement to match over and including 15mm thick screed bed in cement mortar (1:6) including dismantling of old tiles complete all as specified and directed.

Material and labour for rendering 15mm thick in patches on fair faces of brick work or concrete surfaces finished even and fair on walls in cement mortar (1:6) including taking down old plaster, racking out joints hacking for key and scrubbing down with water complete all as specified and directed.

Material and Labour for 10mm thick rendering on concrete surface as on ceiling in cement mortar 1:3, surfaces finished even and smooth without using extra cement including taking down of old plaster complete all as specified and directed.

Material and labour for dubbing out average 15mm thick on irregular faces of chajjas, balconies, walls etc by using cement concrete 1:2:4 type B0 ( using 12.5mm crushed stone agg ) including demolition of old surface complete all as specified.

Material and labour for applying three coats of white wash on new ceiling/chajja surfaces including preparation of surfaces complete all as specified by Engr-In-Charge.

Materials & labour for preparation of newly plastered surface of wall etc and applying three coat of white wash complete all as specified & directed.

Materials & labour for preparation of newly plastered surface of wall etc and applying two coat of cement base paint, any colour over and including primer/putty to match the existing as required, complete all as specified & directed.

Materials & labour for preparation of newly plastered surface and finishing the surfaces of wall with wall care putty and applying two coat of Oil Bound distemper , complete all as specified & directed.

Taking down old existing water proofing treatment from the top of RCC /arch slab, including taking down exisitng PCC padding or plaster and mud puska of any thickness and racking out joints of each slab or hacking the top or RCC slab cleaning with water and disposal removal of rubbish to a distance n.exc 200metre complete all as specified and directed.

Material and labour for 20mm thick rendeirng in CM 1:4 mixed with liquied water proofing admixture as per manufacture's instructions on fair faces of brick wall or concrete surfaces finished even and smooth complete all as specified and directed (Note-WPC shall be measured and paid separetly)

Material and labour for cleaning of plastered surfaces and applying priming coat using bituminous primer @ 0.30Kg/Sqm followed by evelyn a tack coat @ 1.20 Kg/Sqm using 85/25 grade bitumen, over laid with 3mm thick APP modified polymeric water proofing membrane with non woven polyester reinforced of weight not less than 3.60 Kg/Sqm unrolled and boneded to substance with side and end laps 75mm and 100mm as per manufacture'rs instructions and finished top of APP water proofing polymeric membrane with a coat of hot blown industrial bitumen 85/25 grade @ 1.20 Kg /Sqm and finally finished with a coat of bitumenous aluminium paint @ 0.20 Kg/Sqm complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and directed

Supply and fix in repair glass corner shelf fancy type made of 6 to 7 mm thick sheet glass of size 250mmx250mm fixed with chromium plated brackets complete all as specified and directed.

Supply and fix in repair 20 mm bore tubes medium grade galvanized with all fittings fixed to walls ceiling or laid in floors including taking up or down GI steel tubing, testing etc complete all as specified and directed.

All as per item No 16.00 above but 15mm bore tubes complete all as specified and directed.

Supply and fix in repairs fancy type long body bib cock cast copper alloy plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm dia complete all as specified and directed.

Supply & fix in repair wall mixer brass chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15mm bore pipes with and including telephonic shower with crutch (provision for hand shower) complete all as specified and directed.

Supply and fix in repair 15mm bore Angular Cock/Stop valve cast copper alloy facny type chromium plated, complete al as specified and directed.

Supply and fix in repair vitreous china, wash hand basin, white, flat back, size 550mm x 400mm including brackets, brass chromium plated waste fitting and PVC waste pipe of 32 mm dia complete all as specified & as directed by Engr-in-Charge.

Supply and fix in repair bottle trap of PTMT of bore dia of discharge pipe as 32/40mm and having minimum water seal of 25mm (Minimum weight 32mm-260gms/40mm-270gms) complete all as specified and directed.

Supply & fix in repair Vitreous China squatting pan Orissa pattern, size, 580x440mm, white, with integral footrest, and with 'P' or 'S' trap including connection to flushing cistern & flush pipe and making good the distrubed surfaces to match with existing surface complete all as specified and directed.

Supply & fix in repair vitreous china wash down water closet pan (Pedestal pattern), white (excluding flushing cistern and flush pipe) including connection to outgoing pipes and flush pipe complete all as specified and directed.

Supply and fix in repair PVC low level flushing cistern of 9-10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed .

Supply & fix white plastic seat cover for W.C.(E.T) white including M.S CP or aluminium hinging device complete all as specified & as directed by Engr-in-Charge.

Supply and fix in repair ball valves, high pressure 15/20 mm bore, PTMT with epoxy coated aluminium rod, screwed for iron pipe and fixed complete all as specified and directed. (Min wt- 210gm)

Supply and fix in repair brass chromium plated jet spray with 15mm bore flexible pipe of standard length of approved make complete all as specified & as directed by Engr-in-Charge.

Supply and fix in repair health faucet CP brass including 1.5 metre long flexible pipe with hook complete all as specified & as directed.

Supply and fix in repair PVC connection 15mm size with PTMT nuts of length 450 mm, all as specified & as directed.

Supply & fix in repair PVC floor trap with mild steel chromium plated grating including jointing to waste pipe, 75mm dia complete all as specified and directed.

Supply and fix in repair 100/125 mm dia mild steel chromium plated gratings fixed in cement mortar complete all as specified and directed.

Supply and fix in repair 15 mm bore concealed stop valve, cast copper alloy chromium plated fancy type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron complete all as specified and directed.

Material and labour for sunken slab treatment comprising of the following: (a) Taking out/down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken slab including removal of the rubbish from the site of work to a distance not exc 250m complete all as specified and directed. (b) Material and labour for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) over cleaned sunken slab surfaces. (c) material and labour for applying bituminous priming coat/tack coat over PCC surfaces @0.30 kg per square meter of surfaces. (d) Material and labour for applying bitumen grade 85/25over priming coat @1.20kg per square meter and laying APP based polymeric water proofing mebrane 3mm thick of weight not less htan 3Kg/Sqm with 100 mm overlap & sealed with hot flame ( WPC shall be measured & paid for separately).

Taking down chowkhat or frames exc 1.5 sq. m but n exc 4 sq m each.complete all as specified and& as directed by Engr-in-Charge.

Matertial and labour for factory made pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates, etc profile of frame 105x60mm made of 1.25mm MS sheets complete all as specified & as directed by Engr-in-Charge.

Material and labour gauged shutter made out of angle iron 35x35x5mm, 25x25x5mm and 1.5mm thick as per site /sample. The frame for shutter shall be of pressed steel and 10mm Square bars grill complete with fly proof wire mesh havving 0.63mm nominal dia wire and 1.4mm average with aperture including two coats of synthetic enamel paint over a coat of red oxide and including taking down old doors any type with iron items all a specified & as directed by Engr-in-Charge.

Supply and fix 100mm long butt hinges, medium weight, cold rolled mild steel complete all as specified & as directed by Engr-in-Charge.

Supply & fix 200mm long aluminium anodized barrel tower bolts, extruded section having shoot/bolt dia 12mm complete all as specified & as directed by Engr-in-Charge.

Supply and fixing 200mm long aluminium handles, cast type, anodized complete all as specified & as directed by Engr-in-Charge.

Taking down shutter of any description area exc. 1 Sqm but n.exc.2 Sqm each and removing from site complete all as specified and directed.

Material and labour for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening as per specification & drawing shown on page No 178 of SSR part-II (2020) complete all as specified and directed .

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC, ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 174 of SSR 2020 (Part-II) complete all as specified and directed.

Supply and fix in repair pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix in repair for 6 mm thick fibre cement corrrugated sheets fixed with' L' or 'J' type or cranked hook bolts as in roof complete all as specified & directed.

Supply and fix in repair plain , galvanised, mild steel sheeting of 1.00mm thickness as in ridges, hips, valey gutters, drip and straight flashings (length and girth as fixed) with grade of zinc 275 complete all as specified and directed.

Supply and fix in repair aluminium anodized frame work(snap grid) as in false ceiling of size 605mmx605mm consisting of followings and all as directed:-i) Aluminium sections incorporated in frame work shall conform to designation 63400 given in IS: 737-1986. ii) The snap grid shall consist of aluminium anodized main /cross tee of size 36.5mmx25mmx1.4mm thick and 25mm x 25m x1.4mm thick, respectively. iii) Snap grid frame shall be fixed to ceiling with and including supporting hangers consisting of 4mm dia mild steel GI wire. iv) The main and cross tees shall be jointed at junction/crossings with aluminium anodized angle bracket, of size 15mmx15mmx1.5mm thick, fixed with suitable mild steel, bolts, nuts and washers all as per manufacturer’s instructions. v) The snap grid (main/cross tee section) shall be supported at ends all along the wall with aluminium anodized angle of size 25mmx25mmx1.4 m anodized m thick. vi) Size of the snap grid shall be 605mm by 605mm. vii) Minimum average thickness of anodizing shall be 15 micron complete all as specified and directed

Material and labour for brick work with fly ash bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) including demolition old bricks complete all as specified and directed.

Material and labour rendering 15mm thick in patches on fair faces of brick work or concrete surfaces finished even and fair on walls in cement mortar (1:4), complete all as specified.

Supply and fix in repair rolled mild steel as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including dismantling taking down old trues member conf to Fe-410-W (Gde-E-250) quality 'A' complete all as specified and directed.

Supply and fix in repair steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confiriming to IS 1161-1179 grade St 240 complete all as specified and directed.

Materials & labour for in repair washed stone grit plaster on exterior walls in two layers, under layer 15mm thick ( average) in cement plaster 1:4 roughening rowing the under layer with scratching tool, applying cement slurry on the under layer @3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 Cement, coarse sand :2 stone chipping 10mm nominal size) in panels with groove all ground as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed.

Supply and fix in repair insulated PVC wall lining consisting of PVC insulated panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing, thickness of insulated PVC wall lining 12mm including dismantling of boarding of any thickness or description all as specified and directed by Engr-in-Charge.

M/S YAVAV CONSTRUCTION CO.