SPL REPAIRS TO CHAIN LINK FENCE AT TXR AREA (ZONE A) AT AIR FORCE STATION SONEGAON

Amount

Dismantling posts or struts (woods, steel or RCC) any section including taking out embedded portion in concrete/ brick work masonry etc and making good disturbed ground complete all as specified and directed by Engr-in-charge.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm. all as specified and directed by Engr-in-charge.

Dismantling of chain link fencing wire mesh or barbed wire any type as directed by Engr-in-charge.

S & F mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as specified and directed by Engr-in-Charge.

S & F in repair MS screw bolts of dia 11-15 mm ( machine made ) with hexagonal or square at one end and screwded with other end or screwed both ends length of bolt n exc 5cm long complete all as directed by Engr-in-Charge..

M & L plain cement concrete 1:2:4 type B-2 as in foundation filling mass concrete( using 40 mm graded stone aggregate complete ) all as specified and directed by Engineer in Charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed by Engineer in Charge.( Note : Chain link fencing, nut bolts and line wires shall be measured separetely )

Supply only mild steel galvanised Chain link fencing, any size or type complete all as specified and directed by Engr in Charge.

S& F in repair 10 mm dia and over mild steel round bars in chain link fencing complete all as specified and directed by Engineer in Charge.

S&F in repair galvanised stand steel barbed wire 2.24 mm dia barbed with 2mm dia barbes at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised MS wire stapples or steel pins etc all as directed by Engineer in Charge.(each line of wire to be measured seperately)

M & L for preparation of new steel surfaces of any description over 10 cm in width or grith and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed by Engineer in Charge.

Demolition of Brick work or stone/ boulder masonary built in Cement mortar and removing from site complete all as directed by Engineer in Charge.

M & L for brickwork with sub class B bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed by Engineer in charge .

M & L for rendering 15mm thick on fair faces of brickwork or on concrete surfaces in cement mortar (1:6) and finishing surfaces even & smooth without using extra cement complete all as specified and directed by Engineer in charge

M&L 3 coat of white wash on newely plastered surfaces on wall all as specified and directed by Engineer in Charge.

M&L plain cement concrete (1:2:4) type B1 using (20mm Graded stone aggregate ) for coping all as specified and directed by Engineer in Charge..

Demolition of cement concrete in ground floors and pavings n. exc.15 cm thickness( below or above ground level) all as specified and directed by Engineer in Charge.

M & L plain cement concrete (1:4:8 ) type D-2 using (40 mm graded stone aggregate) as in foundation filling mass concreting all as specified and directed by Engineer in Charge.

PURVA ENTERPRISES

M/s M.G. Hargunani

karambir constructions