Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
₹31.9 L
Closing Date
10 Nov 2021, 4:00 pmClosed
Er Rajesh Sumbria
Executive Engineer PWD R and B Division Basohli
Please refer in BOQ
2021_PWDJK_145446_4
e-NIT No.55 of 2021-22 dated 27-10-2021
Open Tender
Civil Works
Item Rate
180 days
Basohli
Please refer Tender documents.
5 documents required · 5 mandatory
₹1,000
Yes
Detail of Treasury Challan as per NIT
Exempted
Executive Engineer PWD R and B Division Basohli
12 Nov 2021
28 Oct 2021
11 Nov 2021
29 Oct 2021
10 Nov 2021
31 Oct 2021
30 Oct 2021
Amount
Earthwork in bulk excavation by mechanical means (Hydraulic excavator) over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth as directed by Engineer-in-charge, including all leads and lift. a) All Kind of soil.
Providing and laying cement concrete of specified grade indluding curing but excluding the cost of centring and shuttering. All work upto plinth level with: a) 1:4:8 (1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size) (including all leads and lifts carriages of material by MT/HL).
Providing and laying cement concrete of specified grade indluding curing but excluding the cost of centring and shuttering. All work upto plinth level with: a) 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) (including all leads and lifts carriages of material by MT/HL).
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centring ,shuttering, finishing and reinforcement. All work upto plinth level with: a) 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size) (including all leads and lifts carriages of material by MT/HL).
Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. a) Cold twisted bars.
Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:4 (1 cement:4 coarse sand) (including all leads and lifts carriages of material by MT/HL).
Half brick masonry with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:4 (1 cement:4 coarse sand) (including all leads and lifts carriages of material by MT/HL).
Centring and shuttering including strutting, propping etc.and removal of form work for : a) Foundation, footings, bases of columns etc. for mass concrete.
12mm cement plaster of mix. 1:6 (1 cement:6 fine sand) (including all leads and lifts carriages of material by MT/HL).
Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter / 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm.
Steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. a) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.
Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture having low VOC (Volatile Organic Compound) content. a) With ready mixed red oxide zinc chromate on steel / iron works having VIC content less than 250 grams/ liter.
Providing and fixing 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design / shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge (complete job).
Supplying,stacking and spreading of good earth including royality and carriage complete job.
Lettering with blac Japan paint of approved brand and manufacture. 10cm height.
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. a) Made of G.I. wire of dia 4mm.
Carriage of the following materials by Mechanical Transport from source to site of work incl. loading, unloading and stacking complete :- a) Sand from Billawar crusher for an average lead of 5.00 Km. by M.T. b) Stone aggregate 40mm nominal size & above from Billawar crusher for an average lead of 5.00 Km. by M.T. c) Stone aggregate (Crusher bajree) below 20mm nominal size from Billawar crusher for an average lead of 5.00 Km. by M.T. d) Bricks from Chadwal for an av. lead of 80.00 km. by M.T.
Shiv Rattan
KARAN SINGH
Swarn Singh
PARSHAD LAL
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .