Renovation of Commissioner office at MCG Building, Block B, Sector 34, Gurugram

Amount

Supply, Installation, Testing and Commisioning of LED recessed mounted downlight with LED Light Emitting Diode for system power 12W, CRI) 80, 230V constant current driver, the colour temperature of 4000K neutral white, direct light emission, housing with ceiling trim, in die-cast aluminium, polyester powder coat applied over a 5- stage pre-treatment, deep recessed satin diffuser, passive cooling, electronic control gear,Protection class II, IP 40 Ø = 159mm, DA(ø) = 142mm, HT = 30 mm

Providing and applying plaster of paris on walls in line and level of maximum 12 mm thickness over plastered surface to prepare the surface even and smooth complete. The rate shall include scrapping, leveling and preparing the surface. The rate shall be inclusive of all types of grooves above the skirting, around the window and door

ACRYLIC Premium EMULSION PAINT :- (As per finishing schedule) - Painting with of approved shade and colour approved make, sand papering the surface, then applying a coat of primer, then applying two coat of Putty, again sand papering the surface and applying the coat of paint with roller finish(Basic rate for paint 175/Litre)

Providing and fixing Wall paper of approved Make/shade and pattern over wall/partition/ Ceiling with necessary surface preparation using manufacturer`s approved water based adhesive as per drawings and approval of the Architect.Rate to include surface preparation to receive the finishes. Base Rate=Rs150/sq.ft.

Providing and fixing 50 mm high Anodised/Powder coated Aluminium Skirting Designed to be installed on wall, gypsum and plywood partitions and on top of all kinds of flooring Installed using screws, to camouflage the rivet points. a capping strip is provided either in PVC of matching color or aluminium. Supplied with pre-drilled holes and protection tape which is removed after completion, Matching corner guards are provided with the profiles.

Providing and fixing of modular trap doors as per architects approval. Make: Knauf Trap Doors - 450X450mm

Providing and fixing of modular trap doors as per architects approval. Make: Knauf Trap Doors - 600X600mm

Providing and fixing of 6mm mirror paneling with 18mm BWP/BWR ply backing fixed using 3M double sided tape. Mirrros to be edge polisehed. Mirror fixing as per NBC guidelines

Providing and fixing fluted acousted paneling of 22mm thickness with paint. ACRYLIC Premium EMULSION PAINT :- (As per finishing schedule) - Painting with of approved shade and colour approved make, sand papering the surface, then applying a coat of primer, then applying two coat of Putty, again sand papering the surface and applying the coat of paint with roller finish(Basic rate for paint 175/Litre)

SINGLE GLAZED TOUGHENED GLASS PARTITIONS-with SYSTEM-50 FRAME PROFILES: Supply and installation of Aluminium Framed Glass Partition for Access and Cabin System for minimal frame, room dividing solutions. Single glazed mullion free demountable glass partition using Toughened/ Laminated glass in proprietary natural anodised/Black aluminium sections ALT 50 of size 50mm x 30mm with Concealed sealing (No visible Gaskets/Seals) with acoustic rating of Minimum 32 db with third party test certificate. The profile will have Carpert Groove at the Bottom on both sides for accomodating max. 8mm carpets. THe Glass to be fixed with help of Proprietary Stability GRIPPER Clamp to have a stable system. It should consists of intermediate slim junction profiles for Glass to Glass vertical joints, 90 Degree L Junction and T Junction profiles suitably to be used as per room configuration designs.No VISIBLE Clip Lines to provide clutter free view at both side of section. The Glass to be Offset mounted towards outer edge leading to minimum aluminium frame on one side. Optional Profile Bottom Seal pair for additional accoustic. Glass thickness - 10( LSG).shall be included in the product.

Providing and fixing of Blackout Roller Blinds fabric made up of 100% Polyester with Acrylic coated of 0.32mm(PVC free) of thickness 0.50mm ±5% and wieghing 270-295gsm with openess factor of 0% .Shrinkage % Warp(0.5 and Weft (0.5,Color fastness)5-6. The control clutch drive unit engineered heavy duty chain drive pulley operating system consisting of gear clutch housing and locking plug containing minimum 6 ribs and inserted at minimum of 37mm into roller tube. It is self lubricating Exclusive clutch with safety pins for secure bracket installation and unlocking pin for quick manual removal. Universal clutch is most convenient for large windows down to the smallest windows. It shall be driven by a ball chain pulley with ball chain and can be positioned at Right hand or Left hand side of the shade. Clutch gear ration 1.75:1 for reduced operating force on larger blinds. Tube bearing plug idler Exclusive self lubricating spring loaded plastic bearing end plug with positive locking wheel allows for adjustment and provides for a secure installation and removal of shade. Tube bearing plug contain minimum 6 ribs and inserted a minimum of 37mm into roller tube.

Supply, Installation, Testing and Commissioning of air cooled variable refrigerant flow modular type Heat Pumps, each comprising of energy efficient multiple scroll compressors, full charge of R-410a refrigerant gas and all accessories as per the specifications. All compressors shall be inverter type. The condensing units shall be suitable to work on cooling as well as heating mode. The condensing units shall be suitable for operation on 415 ±10% volts, 50Hz, 3 phase AC power supply and complete with auto check function for connection error, auto address setting, etc. The outdoor units shall be low noise type. The outdoor units shall be of following capacities : VRV ODUs shall be capable of operating in following range : i. For Cooling : (-)5degC to 50degC ii. For Heating : (-)20degC to 15.5degC a. 40HP(20HP plus 20HP) nominal capacity high COP outdoor unit of single module.

Supply, Installation, Testing and Commissioning of variable refrigerant volume modular type indoor units comprising of EEV and all accessories as per the specifications. The indoor units shall be suitable to work on cooling as well as heating mode. The indoor units shall be suitable for operation on 220 ±6% volts, 50Hz, 1 phase AC power supply. Ductable indoor units shall be suitable to handle extent of ductwork as shown in the design drawings and dehumidified air quantity as mentioned in the heat load summary sheet under `Special Conditions` and the indoor units shall be of following capacities.All Indoor Units shall have inbuilt Drain Pumps. Quoted price shall be inclusive of Plug Top and necessary power cable. i. Cassette Unit 2 TR

Supply, Installation, Testing and Commissioning of variable refrigerant volume modular type indoor units comprising of EEV and all accessories as per the specifications. The indoor units shall be suitable to work on cooling as well as heating mode. The indoor units shall be suitable for operation on 220 ±6% volts, 50Hz, 1 phase AC power supply. Ductable indoor units shall be suitable to handle extent of ductwork as shown in the design drawings and dehumidified air quantity as mentioned in the heat load summary sheet under `Special Conditions` and the indoor units shall be of following capacities.All Indoor Units shall have inbuilt Drain Pumps. Quoted price shall be inclusive of Plug Top and necessary power cable. i. Cassette Unit 4 TR

Supply, Installation, Testing and Commissioning of decorative panels for cassette type

Supply of Corded remote controls for the above indoor units

Supply, Installation, Testing and Commissioning of high pressure copper refrigerant piping including R410a refrigerant of suitable size as required and duly insulated with19mm/13mm thick closed cell elastomeric insulation with class `O` fire retardant properties in tubing form. External Refrigerant piping shall be laid on threaded rod and GI slotted channel supports. Entire refrigerant piping work shall be carried out in accordance with the specifications.PVC sleeves of requisite size shall be provided at wall crossing. Piping shall be of following sizes : Pipe Size Thickness of CSE (O.D.) (O.D.) Insulation a. 34.9 mm 19 mm

Supply, Installation, Testing and Commissioning of high pressure copper refrigerant piping including R410a refrigerant of suitable size as required and duly insulated with19mm/13mm thick closed cell elastomeric insulation with class `O` fire retardant properties in tubing form. External Refrigerant piping shall be laid on threaded rod and GI slotted channel supports. Entire refrigerant piping work shall be carried out in accordance with the specifications.PVC sleeves of requisite size shall be provided at wall crossing. Piping shall be of following sizes : Pipe Size Thickness of CSE (O.D.) (O.D.) Insulation 31.8 mm 19 mm

Supply, Installation, Testing and Commissioning of high pressure copper refrigerant piping including R410a refrigerant of suitable size as required and duly insulated with19mm/13mm thick closed cell elastomeric insulation with class `O` fire retardant properties in tubing form. External Refrigerant piping shall be laid on threaded rod and GI slotted channel supports. Entire refrigerant piping work shall be carried out in accordance with the specifications.PVC sleeves of requisite size shall be provided at wall crossing. Piping shall be of following sizes : Pipe Size Thickness of CSE (O.D.) (O.D.) Insulation 28.6 mm 19 mm

Supply, Installation, Testing and Commissioning of high pressure copper refrigerant piping including R410a refrigerant of suitable size as required and duly insulated with19mm/13mm thick closed cell elastomeric insulation with class `O` fire retardant properties in tubing form. External Refrigerant piping shall be laid on threaded rod and GI slotted channel supports. Entire refrigerant piping work shall be carried out in accordance with the specifications.PVC sleeves of requisite size shall be provided at wall crossing. Piping shall be of following sizes : Pipe Size Thickness of CSE (O.D.) (O.D.) Insulation 25.4 mm 19 mm

Supply, Installation, Testing and Commissioning of high pressure copper refrigerant piping including R410a refrigerant of suitable size as required and duly insulated with19mm/13mm thick closed cell elastomeric insulation with class `O` fire retardant properties in tubing form. External Refrigerant piping shall be laid on threaded rod and GI slotted channel supports. Entire refrigerant piping work shall be carried out in accordance with the specifications.PVC sleeves of requisite size shall be provided at wall crossing. Piping shall be of following sizes : Pipe Size Thickness of CSE (O.D.) (O.D.) Insulation 22.2 mm 19 mm

Supply, Installation, Testing and Commissioning of high pressure copper refrigerant piping including R410a refrigerant of suitable size as required and duly insulated with19mm/13mm thick closed cell elastomeric insulation with class `O` fire retardant properties in tubing form. External Refrigerant piping shall be laid on threaded rod and GI slotted channel supports. Entire refrigerant piping work shall be carried out in accordance with the specifications.PVC sleeves of requisite size shall be provided at wall crossing. Piping shall be of following sizes : Pipe Size Thickness of CSE (O.D.) (O.D.) Insulation 19.1 mm 13 mm

Supply, Installation, Testing and Commissioning of high pressure copper refrigerant piping including R410a refrigerant of suitable size as required and duly insulated with19mm/13mm thick closed cell elastomeric insulation with class `O` fire retardant properties in tubing form. External Refrigerant piping shall be laid on threaded rod and GI slotted channel supports. Entire refrigerant piping work shall be carried out in accordance with the specifications.PVC sleeves of requisite size shall be provided at wall crossing. Piping shall be of following sizes : Pipe Size Thickness of CSE (O.D.) (O.D.) Insulation 15.9 mm 13 mm

Supply, Installation, Testing and Commissioning of high pressure copper refrigerant piping including R410a refrigerant of suitable size as required and duly insulated with19mm/13mm thick closed cell elastomeric insulation with class `O` fire retardant properties in tubing form. External Refrigerant piping shall be laid on threaded rod and GI slotted channel supports. Entire refrigerant piping work shall be carried out in accordance with the specifications.PVC sleeves of requisite size shall be provided at wall crossing. Piping shall be of following sizes : Pipe Size Thickness of CSE (O.D.) (O.D.) Insulation 12.7 mm 13 mm

Supply, Installation, Testing and Commissioning of high pressure copper refrigerant piping including R410a refrigerant of suitable size as required and duly insulated with19mm/13mm thick closed cell elastomeric insulation with class `O` fire retardant properties in tubing form. External Refrigerant piping shall be laid on threaded rod and GI slotted channel supports. Entire refrigerant piping work shall be carried out in accordance with the specifications.PVC sleeves of requisite size shall be provided at wall crossing. Piping shall be of following sizes : Pipe Size Thickness of CSE (O.D.) (O.D.) Insulation 9.5mm 13 mm

Supply, Installation, Testing and Commissioning of high pressure copper refrigerant piping including R410a refrigerant of suitable size as required and duly insulated with19mm/13mm thick closed cell elastomeric insulation with class `O` fire retardant properties in tubing form. External Refrigerant piping shall be laid on threaded rod and GI slotted channel supports. Entire refrigerant piping work shall be carried out in accordance with the specifications.PVC sleeves of requisite size shall be provided at wall crossing. Piping shall be of following sizes : Pipe Size Thickness of CSE (O.D.) (O.D.) Insulation 6.4 mm 13 mm

Supply, Installation, Testing and Commissioning of CPVC pipes cut to required lengths and installed for condensate drain. Quoted price shall be inclusive of supply and fixing in position the necessary fittings like elbows, tees reducers etc., and supporting arrangement in accordance with the approved shop drawings and specifications. Pipes shall be insulated with 9mm thick closed cell elastomeric insulation with class `O` fire retardant properties in tubing form . Pipes shall be of following sizes : 40mm dia

Supply, Installation, Testing and Commissioning of CPVC pipes cut to required lengths and installed for condensate drain. Quoted price shall be inclusive of supply and fixing in position the necessary fittings like elbows, tees reducers etc., and supporting arrangement in accordance with the approved shop drawings and specifications. Pipes shall be insulated with 9mm thick closed cell elastomeric insulation with class `O` fire retardant properties in tubing form . Pipes shall be of following sizes : 32mm dia

Supply, Installation, Testing and Commissioning of CPVC pipes cut to required lengths and installed for condensate drain. Quoted price shall be inclusive of supply and fixing in position the necessary fittings like elbows, tees reducers etc., and supporting arrangement in accordance with the approved shop drawings and specifications. Pipes shall be insulated with 9mm thick closed cell elastomeric insulation with class `O` fire retardant properties in tubing form . Pipes shall be of following sizes : 25mm dia

Supply, laying, affecting connections and Testing of the following sizes of control cum transmission wiring to be laid in MS conduits between indoor units and their wired remotes. i 2C x1.5 Sqmm copper wiring

Supply, Installation,Testing and Commissioning of following imported copper fittings to be provided in refrigerant pipe line. Refnet Joints (Y- Joints)

Supply,Installation, Testing and Commissioning of split type airconditioning units, each comprising of an outdoor and single indoor unit. Condensing unit shall be complete with hermatically sealed / semi- hermatic scroll/ rotary compressor, air cooled condenser with fan. Evaporating unit shall consist of a fan section with dynamically balanced centrifugal fans driven by FHP motor, multirows deep copper cooling coil with aluminium fins, thermostatic expansion valve valves etc. Enclosures shall be fabricated as specified. The evaporating unit shall be equipped with synthetic fibre filters, insulated drain pan, safety controls, thermostat all complete in a unit.The enclosure shall be factory painted to a smooth finish. The quoted price shall be inclusive of full charge of refrigerant gas, vibration isolation pads etc. Refrigerant Shall be R-32/R410A/R407C. Split Unit Model proposed for Technical area shall be capable of working on cooling mode during peak winters with ambient temperatures of 1-2degC. Single phase non-ductable split units with rotary compressor (Five Star Rating) : (Unit should be suitable to handle total refrigerant piping length upto 30RM.) i 2TR nominal capacity, split unit with single Hi-wall type indoor unit and cordless control .

Supply, Installation, Testing and Commissioning of copper refrigerant piping complete with copper fittings and charge of refrigerant gas for the above split units. Piping associated with split units to be insulated with 13mm thick closed cell elastomeric insulation in tubing form as required. Piping shall be laid over duly painted slotted angle trays fixed with GI clamps. Quoted Price shall be inclusive of UV protection paint for all exposed pipes of approved make . Referigerant piping shall be epoxy coated to prevent erosion. Price shall be inclusive of copper power and control cabling from indoor to outdoor unit as required 2.1 Pair of Soft refrigerant piping for split packages with rotary compressor.

Supply, Installation,Testing and Commissioning of drain pump for Hi-wall split units complete with all accessories as required. Drain Pump shall be suitable for operation on 220 plus 6 % volts 50 Hz,1phase AC power supply. 2.2 Drain pump for Hi-wall split units

Supply and Erection of MS base frame duly applied with red-oxide primer and followed by black enamel paint for mounting of outdoor units.

Supply, Installation,Testing and Commissioning of circular /rectangular inline fans for exhaust air complete with sheet metal casing, direct driven centrifugal fan, motor with proper protection and inspection door. Fan shall be suitable for operation on 220±6 % volts, 50 Hz,1phase AC power supply. Flanges to be provided on both sides to facilitate duct connections. Fan shall be installed as shown in the drawings and will be of following characteristics : All single phase inline fans shall be provided with factory fitted speed regulators. All Fans Should be complete with Plug Top and necessary power cable. 500 CFM Inline Fan

Supply, Installation,Testing and Commissioning of circular /rectangular inline fans for exhaust air complete with sheet metal casing, direct driven centrifugal fan, motor with proper protection and inspection door. Fan shall be suitable for operation on 220±6 % volts, 50 Hz,1phase AC power supply. Flanges to be provided on both sides to facilitate duct connections. Fan shall be installed as shown in the drawings and will be of following characteristics : All single phase inline fans shall be provided with factory fitted speed regulators. All Fans Should be complete with Plug Top and necessary power cable. 200 CFM

Supply, Installation,Testing and Commissioning of circular /rectangular inline fans for exhaust air complete with sheet metal casing, direct driven centrifugal fan, motor with proper protection and inspection door. Fan shall be suitable for operation on 220±6 % volts, 50 Hz,1phase AC power supply. Flanges to be provided on both sides to facilitate duct connections. Fan shall be installed as shown in the drawings and will be of following characteristics : All single phase inline fans shall be provided with factory fitted speed regulators. All Fans Should be complete with Plug Top and necessary power cable. 300 CFM Inline Fan

Supply, Fabrication, Installation and Testing of sheet metal ducts complete with vanes, splitter dampers, hanging arrangement including check nuts in accordance with the approved shop drawings and specifications. i a. 0.63mm (24 gauge) GSS

Supply, Installation , Testing and Balancing of one way blow linear supply cum return air grilles complete with fixed core as per approved shop drawings and specifications. The grilles shall be of approved colour and shade. Powder coated aluminium grilles of extruded sections with integral flanges on both sides and ends as required complete with corner pieces. i. 100/150/200/250 mm High grilles

Supply, Installation and Testing of Aluminium multi blade type louver dampers as per the specifications and shop drawings.

Supply, Installation and Testing of Bird Screens with GI wire mesh to be installed at the suction of fresh air/discharge of Exhaust air as per the specifications and shop drawings. Sample of bird screen to be got approved from consultants and Clients prior to procurement.

Supply, Installation and Testing of TPN isolator in weather proof enclosure near i VRV ODUs

Supply, Installation and Testing of TPN isolator in weather proof enclosure near ii Split Unit

Supply, laying, affecting connections and Testing of the following sizes of 1.1 KV armoured PVC insulated aluminium conductor cables. Cables shall be inclusive of all clamps, saddles, screws, cable identification tags, cable terminal joints including terminal lugs, insulating tapes, affecting terminal connections to the equipment as per the specifications and as required. Quoted price shall be inclusive of perforated duly painted 2mm thick MS trays and 8 SWG copper earth wire for AHUs. a. 4 C x 10 Sqmm cable (Copper)

Supply, laying, affecting connections and Testing of the following sizes of 1.1 KV armoured PVC insulated aluminium conductor cables. Cables shall be inclusive of all clamps, saddles, screws, cable identification tags, cable terminal joints including terminal lugs, insulating tapes, affecting terminal connections to the equipment as per the specifications and as required. Quoted price shall be inclusive of perforated duly painted 2mm thick MS trays and 8 SWG copper earth wire for AHUs. b 4 C x 2.5 Sqmm Cable ( Copper Flexible)

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required- 1 run of cable

Supply, Installation, Testing and Commissioning of CAT6 information outlet (I/O) for camera at user end. Approved Makes: Belden/ Siemon/ Panduit/ Der Wiser

Supply, Installation, Testing and Commissioning of loaded 24 port CAT6 jack panel for CAT6 cable termination at rack end.Approved Makes: Belden/Siemon/Panduit/Der Wiser

Supply , Installation , Testing and Commissioning of CAT6 patch cord 3 feet for rack side switch to jack panel connectivity. Approved Makes: Belden/Siemon/Panduit/Der Wiser

Supply , Installation , Testing and Commissioning of CAT6 patch cord 7 feet for information outlet (I/O) to end user device connectivity. Approved Makes: Belden/Siemon/Panduit/Der Wiser

Supply , Installation , Testing and Commissioning of CAT6 patch cord 7 feet for information outlet (I/O) to end user device connectivity.Approved Makes: Belden/Siemon/Panduit/Der Wiser

Supply , Installation , Testing and Commissioning of 3 MP Dome Camera , ONVIF profile S and G ,UL , CE , FCC Certified , 1/2.8` CMOS sensor ,3.6 mm fixed focal , triple stream ,Min Illumination :0.01 Lux @ (F1.2, AGC ON ), 0.028 Lux @(F2.0, AGC ON), 0 Lux with IR , Shutter Speed : 1/5 ? 1/100,000 s , Edge analytics : line crossing , perimeter intrusion , stationary object ,Video Compression : H.265 ,H.264 , frame rate 30 fps @ 3MP , Edge analytics : line crossing , perimeter intrusion ,Face detection , cross counting , stationary object ,Inbuilt IR LED , IR distance upto 30 mtrs ,IP66,POE. Approved Makes :Allgovision/ Impulse / Norden / Pelco/ Axis

Supply , Installation , Testing and Commissioning of 3 MP Bullet Camera , ONVIF profile S and G ,UL , CE , FCC Certified , 1/2.8` CMOS sensor ,3.6 mm fixed focal , triple stream ,Min Illumination :0.05 Lux @ (F1.2, AGC ON), 0 Lux with IR , Shutter Speed : 1/5 ?1/100,000 s , Video Compression : H.265 , H.264 , 120 dB WDR ,frame rate 30 fps @ 3MP ,Edge analytics : line crossing , perimeter intrusion ,Face detection , cross counting , stationary object , Inbuilt IR LED , IR distance upto 30 mtrs ,IP 66 , POE . Approved Makes :Allgovision/ Impulse / Norden / Pelco/ Axis

Supply, Installation, Testing and Commissioning of ONVIF profile S and G ,UL certified 16 Channel NVR , 4 SATA ports, each SATA capacity of upto 8 TB , Recording Bandwidth 320 Mbps , 1 X HDMI , 1 X VGA , Alarm : 16ch in / 1ch out , 1 X RJ45 port , 1x3.0 USB for backup / upgrade, 2x 2.0 USB for mouse , Smart Phone support : iOS, Android. Approved Makes :Allgovision/ Impulse / Norden / Pelco/ Axis

SITC of two way ceilng speaker with ABS enclosure 16 watts of peak power handling capacity, Power Taps @100V: 3.8W, 7.5W, 16W, Power Taps @70V: 1.9W, 3.8W, 7.5W, 16W, Cut out Size: 208mm etc all complete.

SITC of conference central control unit should be capable of 100M network digital audio and control signal transmission over cat cable, built-in with high performance CPU, which sets translation, discussion, attendance, voting, electronic plate as a whole for future system expansion, should support nNon compressed audio transmission, 48K sampling rate, 20Hz~20KHz bandwidth perfect sound, the system should pen 8 microphones at the same time ,shoudl support atleast 32 bit high speed DSP floating-point processing, supports 2 channel audio output at the same time, acoustic feedback suppression, noise elimination, and digital equalization provide high sensitive and perfect sound, shoudl include management software, TCP/IP control, provide reliable control and safety managemen, unit and intelligent fault analysis, can analyze the meeting unit type, quantity, distribution, fault etc, should have hot standby, the system can normally operate eventhough one of the controllers broken down etc all complete.

SITC of 20x optical zoom PTZ camera ,USB/HDMI Video Output,Sleek and intelligent design, should have Plug and Play USB3.0 Connectivity,C rystal clear HD1080P image quality, accurate,smooth and silent PTZ Movement, Preset: 9 via IR remote setting (256 via RS232), Wide field of view with no video distortion, 1/3 inch high quality, 2.38MP (16:9) CMOS sensor, with Full Glass Lens Material, should support ceiling mount, wall mount and tripod mount (Reverse mountable), 2D and 3D NR for best video quality in different lighting conditions, should support Visca, Pelco-P, and Pelco-D protocol, RS232/RS485 Camera Control, should be compatible with most leading video conferencing software and platform etc all complete.

Supply, Installation,Testing and Commissioning of Integrated Controller One RS-232/422/485 COM port with hardware and software handshaking Two RS-232 COM ports with software handshaking only 8 IR/serial, 8 relay, and 8 Versiport I/O ports Native BACnet®/IP support,Backwards compatible to run existing SIMPL programs Full Unicode (multi-language) support Increased network throughput and security,Secure access though Active Directory integration or standalone account management Hardware level security using 802.1x authentication,JITC certified model available for use in secure network environments,IIS v.6.0 Web Server,IPv6 ready,Front panel USB computer console port,1-space rackmountable SDRAM: 512 MB,Flash: 4 GB,Memory Card: supports SD™ and SDHC™ cards up to 32 GB,External Storage: support USB mass storage devices up to 1 TB.

SITC of 16U Rack made of sheet Metal, ventilation with one side exhaust fan provision at top of one side, should have lock with keys on front, back doors and sides, side Door should be removable for easy installation and later maintenance, with lock and key, should have power Strips, rack plates, Cable Routing Perforation and 4 Spin Wheels etc all complete

SITC of speaker cable etc all complete

SITC of CAT5e/CAT6 ControlandSignal cable etc all complete.

SITC of 20/22AWG microphone cable(as per actual) etc all complete.

SITC of HDMI cables upto 15 meters M2M etc all complete .

SITC of cables 1.5 meters VGA plus audio etc all compelte .

SITC of USB cables 10 meters M2M etc all compelte .

SITC of various video cables and connectors of various lengths included but not limited to HDMI, VGA plus audio as per design requirements etc all compelte

Supplying and drawing of exceeds the requirements of Category 6 Unshielded Twisted Pair 4 pair cable shall be compliant with ANSI/TIA/EIA-568-C.2 channel perfomance and IEC/ISO 11801, Construction: 4 twisted pairs separated by internal X shaped, 4 channel, polymer spine / full separator. Half shall not be accepted. The 4 pair Unshielded Twisted Pair cable shall be ETL Verified. Conductor Solid bare Copper and Jacket LSZH , Blue colour with RIP cord, Bending Radius should be 8xCable Diameter while pulling and Pulling Force: 11.5 Kg, Cable should support operating Temperature from -20° to plus 70°C

Supplying, installing, testing and commissioning of I/O Jack should be Category 6, TIA568B.2-1 – 250MHz, I/O Jack should be for 100 W, 22-24 AWG copper cable shall: Use insulation displacement connectors (IDC), Information outlet (RJ45 jack) should be covered under ETL Verification program for compliance with TIA568B.2- 1, ETL certificate to be submitted with offer the I/O jack should be Blue colour for easy port identification, Operating Life: Minimum 750 insertion cycl

Supplying, installing, testing and commissioning of CAT 6 Patch panel with transmission performance compliance with the ANSI/TIA/EIA 568C.2 standard. Should allow for a minimum of 200 re-terminations without signal degradation below standards compliance limit.Should have self-adhesive, clear label holders and white labels with the panel Panel should be of 1U height with 24 port pre-loaded IO. IDC: Suitable for 22-26 AWG stranded and solid wire compatible with both 110 and Krone punch down tools, Operating Life: Minimum 750 insertion cycles support operating Temperature from -20° to plus 70°

Supply , Installtion , Testing and comissioning of Cat6 1Meter patch cords Blue colour with high quality four pair twisted stranded cable terminated with RJ45 tangle free modular plugs at both the ends. The Conductor should be 24 AWG, Multi-strands and Bare Copper Conductor Metal

Supply , Installtion , Testing and comissioning of Cat6 2 Meter patch cords Blue Colour with high quality four pair twisted stranded cable terminated with RJ45 tangle free modular plugs at both the ends. The Conductor should be 24 AWG, Multi-strands and Bare Copper Conductor Metal

Supply , Installtion , Testing and comissioning of Face Plate should be Single Gang square plate, 86mmx86mm, should have Write on labels, The Faceplates should have inbuilt shutters which are compatible with any standard colored keystones jacks. The Faceplates are available in one, two and four port variants.

Supply, Installation, Testing and Commissioning of 48 U Network Rack with 19``PDU 6 points 5 amp , Stationary shelf, Mounting Hardware(pac. Of 10) , Cable manager Horizontal 1U , Fan 230 vac 90 cfm top mounted.

Supply, Installation, testing and commissioning of 1 U Horizontal Wire Manager 60mm depth (Front Side)

Supply, Installation, Testing and Commissioning of Switch with at least 48 X 10/100/1000BASE-T Ports and 2 x 10G Base-T and 4 X SFP plus Ports, Switching capacity should be 168 Gbps, Switch should support 16 L3 IP interfaces, ACL, QOS, VRRPv3, Equal-Cost Multi-Path (ECMP) , UDP helper, Policybased Route (PBR), 802.1x, Embedded 6 kV surge protection on ethernet ports, Switch should have console port, RJ45 Management Port and USB port, Should support internal/external redudent power supply for 1 plus 1 redundancy and load sharing. Certification: CE, FCC, BSMI, CB and UL. OEM should available in Gartner Magic Quadrant for Wired and Wireless LAN Access Infrastructure Report from latest last three consecutive year.

Supply, Installation, Testing and Commissioning of Switch with at least 48 X 10/100/1000BASE-T POE plus Ports and 2 x 10G Base-T and 4 X SFP plus Ports, Switching capacity should be 168 Gbps, Switch should support 16 L3 IP interfaces, ACL, QOS, VRRPv3, Equal-Cost Multi-Path (ECMP) , UDP helper, Policy-based Route (PBR), 802.1x, Embedded 6 kV surge protection on ethernet ports, Switch should have console port, RJ45 Management Port and USB port, Should support internal/external redudent power supply for 1 plus 1 redundancy and load sharing. Certification: CE, FCC, BSMI, CB and UL. OEM should available in Gartner Magic Quadrant for Wired and Wireless LAN Access Infrastructure Report from latest last three consecutive year

Supply, installation, testing and commissioning of Dual-band 802.11abgn/ac Wireless Access Point, 2x2:2 streams, dual ports, 802.3af PoE support. Does not include power adapter or PoE injector.should Includes Warranty and Mounting Kit complet in all respect.

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables at the intersection of raceways supplied completely with base and cover plates, height adjustable junction box 65- 90 mm including all accessories complete in all respect as per the directions of engineer i a) 300x 300 x 65-90 mm

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables at the intersection of raceways supplied completely with base and cover plates, height adjustable junction box 65- 90 mm including all accessories complete in all respect as per the directions of engineer i 225x 225x 65-90 mm

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables at the intersection of raceways supplied completely with base and cover plates, height adjustable junction box 65- 90 mm including all accessories complete in all respect as per the directions of engineer i 150x 150 x 65-90 mm

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with required suitable number of GI couplers for joining raceways and fixing GI brackets and all accessories complete in all respect as per the directions of engineer in charge 300mmx38mm(GI) - 3 compartment

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with required suitable number of GI couplers for joining raceways and fixing GI brackets and all accessories complete in all respect as per the directions of engineer in charge 225mmx38mm(GI) - 3 compartment

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with required suitable number of GI couplers for joining raceways and fixing GI brackets and all accessories complete in all respect as per the directions of engineer in charge 150mmx38mm(GI)

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with required suitable number of GI couplers for joining raceways and fixing GI brackets and all accessories complete in all respect as per the directions of engineer in charge 100mmx38mm(GI)

Company logo made in acryllic / stainless steel.

3M frost film fixed on toughened glass partitions and doors

Provide and fix framed art work

Laminated ceiling fixed in GI framework, laminate fixed on 12 mm mdf, as desired by the architect as per design

Provoding and fixing cell ceiling grid type powder coated and fixed on appropriate framework.

Supply and installation of Acoustic pet panel baffle ceiling of size 25-30mm th. and 200mm high @ 150mm c/c along with necessary suspension ystem as per design intent and as/appd.

Providing and fixing preengineered wood, seld lockingwooden flooring laid on PCC with proper fillign below flooring with foam and bubble sheet.

Paint aluminum sections with one coat of primer and two coats of enamel paint, shade as approved by the architect as per the design.

Supply, Installation, Testing and Commisioning of strip roll luminaire with HE-High Efficiency LED (Light Emitting Diode), system power:, luminous flux of luminaire 1540 lm, colour temperature of 4000K, CRI)80, SDCM 3,MacAdam 3,230V constant current driver, 70% of luminous flux after 50,000 operating hours, energy efficient LEDs, direct light emission, luminaire, Protection class I, for kove light- 50 m roll. Make: Phillips,

Supply, Installation, Testing and Commisioning appropriate driver for LED strip roll for Kove light

Supply, Installation, Testing and Commisioning of Surface Mounted luminaire with HPE (High-Performance Efficiency) LED (Light Emitting Diode) system power: 15 W, Luminous flux of luminaire 1000 lm, Colour temperature of 4000 K, neutral white, CRI ) 80, 230 V constant current driver, 70 % of luminous flux after 50,000 operating hours, Energy-efficient LEDs, Direct light emission, Luminaire profile in aluminium, Polyester powder white coloured coat applied over a 5- stage pre-treatment, snap-fit satin diffuser for homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE) internal wiring, Electronic control gear,Protection class II, IP 40,L = 600 mm, B = 35 mm, H = 50 mm.

Supply, Installation, Testing and Commisioning of Pendant downlight with HPE (HighPerformance Efficiency), system power: 35 W, Luminous flux of luminaire 1200 lm, Colour temperature of 4000 K, Neutral white, CRI ) 80, 230 V constant current driver, 70% of luminous flux after 50,000 operating hours: energy-efficient LEDs, direct light emission, Polyester powder black coloured coat applied over a 5-stage pretreatment, Opal diffuser for homogenous light distribution, electronic control gear, Adjustable wire suspension,Protection class II, IP 20,Ø = 177.5 mm, H = 107 mm, Special Lighting

Supply, Installation, Testing and Commisioning of ceiling recessed grid light with HPE (High-Performance Efficiency), system power: 36W, Luminous flux of luminaire 1200 lm, Colour temperature of 4000 K, Neutral white, CRI ) 80, 230 V constant current driver, 70% of luminous flux after 50,000 operating hours: energy- efficient LEDs, direct light emission, Polyester powder black coloured coat Applied over a 5-stage pretreatment, Opal diffuser for homogenous light distribution, electronic control gear, Adjustable wire suspension,Protection class II, IP 20,Ø = 160 mm, H = 43 mm. Light size 600X600 mm. make: Phlips or similar

Supply, Installation, Testing and Commisioning of cell Ceiling mounted downlight with HPE (High-Performance Efficiency), system power: 25 W, uminous flux of luminaire 1200 lm, Box type poweder coated to fit in open cell ceilingColour temperature of 4000 K, Neutral white, CRI ) 80, 230 V constant current driver, 70% of luminous flux after 50,000 operating hours: energy- efficient LEDs, direct light emission, Polyester powder black coloured coat applied over a 5-stage pre-treatment, Opal diffuser for homogenous light distribution, electronic control gear, Adjustable wire suspension, Make Philips or similar

Supply, Installation, Testing and Commisioning of LED recessed mounted downlight with LED Light Emitting Diode for system power 9W, the luminous flux of 1200 lm, CRI) 80, 230V constant current driver, the colour temperature of 4000K neutral white, direct light emission, housing with ceiling trim, in die-cast minium, polyester powder coat applied over a 5-stage pre-treatment, deep recessed satin diffuser, passive cooling, electronic control gear,Protection class II, IP 40Ø = 159mm, DA(ø) = 142mm, HT = 30 mm LED Spot light Make: Philips or similar

Supply, Installation, Testing and Commisioning of Bracket light haloge type with HPE (High-Performance Efficiency), system power: 25 W, uminous flux of luminaire 1200 lm, Make Philips or similar

Providing Philips LED 4` batten light..

Providing and fixing of wall panelling with pasting 1.25 mm thick laminate over 12 mm thick mdf/ply board over frame of aluminium section (25*50 mm) and packing all complete.

Providing and fixing of 4 mm thick veneer over 12 mm thick MDF/Ply board over frame of aluminium section (25x50 mm) and polishing the veneer surface with PU matt finish polish all complete.

Bidder Name

Amount

CROSS ROAD BUILDCON PRIVATE LIMITED(GSTN-NA)

Sh. Rajesh Kumar(GSTN-NA)

M/s Mahashiv Promoters Pvt. Ltd.(GSTN-NA)

M/s Mahashiv Promoters Pvt. Ltd.

Sh. Rajesh Kumar

CROSS ROAD BUILDCON PRIVATE LIMITED

Sh. Rajesh Kumar