Repair / Maint of EOT Cranes and connected crane accessories at AF StnTughlakabadunder GE (AF) Tughlakabad

Amount

M&L for locating the fault in E.O.T Crane of any capacity upto 10 Ton including rectification of minor defects such as tightening of nut and bolts, checking and rectifying loose connection of control panel, accessories and current collectors replacing of fuse wire, etc to keep the crane functional and making the free movement of entire unit as directed by Engr-in-Charge. Note :- Contractor will send their technically qualified rep for taking over daily crane complaint from user end and to rectify the same including open the separate register for complaints and signed by concerned user rep , MES rep after rectify the complaint and submit the same before claiming the Payment of item.

M&L for Crane Load testing of ½ ton EOT crane at 125% of the safe working load by providing dead load/load test block for capacity test on all the motions of cranes (dead weight load to be arranged by the Contractor). Note:- (i) Load for load testing shall be arranged by the contractor through OEM and record for the same shall be kept in record duly signed by user’s rep / MES rep and no extra payment shall be made to the contractor on this account. A load testing certificate furnished by OEM shall be submitted by the contractor after load tetsing for every individual crane. (ii) Contractor will ensure all the cranes are in serviceable condition before starting the load testing. If any crane are in unserviceable condition the same will be made serviceable before starting the load testing. (iii) Contractor shall carriedout load testing on as and when required basis.

All as per item No- 2 here-in-before but for capacity 1 ton EOT Crane

All as per item No- 2 here-in-before but for capacity 3 ton EOT Crane

All as per item No- 2 here-in-before but for capacity 5 ton EOT Crane

All as per item No- 2 here-in-before but for capacity 10 ton EOT Crane

M&L in replacement of cable resting trolly MS wheel (with four ball bearing) for 5 Ton EOT crane including necessary welding work complete all as specified and as directed

M&L in replacement of cable resting trolly MS wheel (with four ball bearing) for 3 Ton EOT crane including necessary welding work complete all as specified and as directed

M&L in replacement of cable resting trolly MS wheel (with four ball bearing) for 10 Ton EOT crane including necessary welding work complete all as specified and as directed

M&L for servicing of 10 ton EOT crane comprising of the following:- (i) Greasing/oiling of required part ie shaft, coupling, rope drum shaft bearing etc. (ii) Checking & testing/adjustment of brakes for all the motions (iii) Checking & tightening of coupling bolts, motor foundation bolt etc. (iv) Checking the wiring connections in control panel and other accessories and to ensure that no loose/naked connection exist. (v) Checking of gear oil in gear boxes and topping them if necessary . (vi) Checking of transformer oil in electro hydraulic thruster unit & topping if necessary (vii) Cleaning of Bridge girder including plate form, cabin, panel, complete

All as per item No 10 here-in-before but for crane 5 ton EOT crane.

All as per item No 10 here-in-before but for crane 3 ton EOT crane.

All as per item No 10 here-in-before but for crane 1.25 ton & 1 ton EOT crane.

All as per item No 10 here-in-before but for crane ½ ton EOT crane.

M&L for replacement of heavy duty thruster brake type T-250-18 of dia 250 MM suitable for 3 Ton EOT Crane complete all as specified and directed. Make Magtech or as approved by GE

M&L for replacement of heavy duty thruster brake type T-250-18 of dia 250 MM suitable for 5 Ton EOT Crane complete all as specified and directed. Make Magtech or as approved by GE

M&L for replacement of heavy duty thruster brake type T-250-18 of dia 250 MM suitable for 10 Ton EOT Crane complete all as specified and directed. Make Magtech or as approved by GE

M&L in replacement of step down transformer 300 VA/415/110/24 volt suitable for 5 to 3 ton EOT crane. Make- Universal or as approved by GE

M&L in replacement of steel wire rope suitable for 10 ton EOT crane complete all as specified and directed.

M&L in replacement of steel wire rope suitable for 5 & 3 ton EOT crane complete all as specified and directed.

M&L in replacement of steel wire rope suitable for 1.25, 1 & ½ ton EOT crane complete all as specified and directed.

M&L for taking down unserviceable motor of capacity 1.5 HP to 5 HP from crane and refixing the same in there existing location after repairing/re-winding complete all as specified and as directed by Engr-in-charge

M&L for rewinding of burnt motor of capacity 5 HP LT motion of EOT crane transporting to & fro workshop cutting & taking out burnt copper winding wires cleaning complete with proper cleaning solution & rewinding with same gauge best quality copper enamelled winding wire and putting properly with packing materials, varnishings etc & drying & replacing wornout bearing/terminal plate, reassembling, fixing in original position, testing & commissioning complete all as specified and directed.

M&L for rewinding of burnt motor of capacity 5 HP CT motion of EOT crane transporting to & fro workshop cutting & taking out burnt copper winding wires cleaning complete with proper cleaning solution & rewinding with same gauge best quality copper enamelled winding wire and putting properly with packing materials, varnishings etc & drying & replacing wornout bearing/terminal plate, reassembling, fixing in original position, testing & commissioning complete all as specified and directed.

M&L for rewinding of burnt motor of capacity 3 HP LT motion of EOT crane transporting to & fro workshop cutting & taking out burnt copper winding wires cleaning complete with proper cleaning solution & rewinding with same gauge best quality copper enamelled winding wire and putting properly with packing materials, varnishings etc & drying & replacing wornout bearing/terminal plate, reassembling, fixing in original position, testing & commissioning complete all as specified and directed.

M&L for rewinding of burnt motor of capacity 3 HP CT motion of EOT crane transporting to & fro workshop cutting & taking out burnt copper winding wires cleaning complete with proper cleaning solution & rewinding with same gauge best quality copper enamelled winding wire and putting properly with packing materials, varnishings etc & drying & replacing wornout bearing/terminal plate, reassembling, fixing in original position, testing & commissioning complete all as specified and directed.

M&L for rewinding of burnt motor of capacity 1.5 HP LT motion of EOT crane transporting to & fro workshop cutting & taking out burnt copper winding wires cleaning complete with proper cleaning solution & rewinding with same gauge best quality copper enamelled winding wire and putting properly with packing materials, varnishings etc & drying & replacing wornout bearing/terminal plate, reassembling, fixing in original position, testing & commissioning complete all as specified and directed.

M&L for rewinding of burnt motor of capacity 1.5 HP CT motion of EOT crane transporting to & fro workshop cutting & taking out burnt copper winding wires cleaning complete with proper cleaning solution & rewinding with same gauge best quality copper enamelled winding wire and putting properly with packing materials, varnishings etc & drying & replacing wornout bearing/terminal plate, reassembling, fixing in original position, testing & commissioning complete all as specified and directed.

Taking down EOT Crane of capacity upto 10 ton crane cross member (whole structure) from the gantary with safe arrangement along with hoist, gear box,brakes, LT motor,CT motor, main hoist motor, LT panel and all other connected items and M & L for replacement installation, testing and commssioning of the following: (i) Replacement of LT motion gear box -02 Nos (ii) Replacement of LT motion motors -02 Nos (iii) Replacement of panel control wiring with 2.5 sq mm copper conductor -01 Job (iv) Replacement/modification of VVF drive for LT motion -01Job (v) Replacement of push button station and rewiring -01Job (vi) Reassembling , testing ,commissioning and complete installation of crane -01Job (vii) Seviceing of complete crane -01Job (viii) Load testing of crane -01 Job (ix) Replacement of AC drive -01 Job (x) Replacement of AC drive -01Job (xi) Replacement of panel wiring and contactor- 01Job (xii) Replacement of current colletor for three phase supply -04 Nos (xiii) Replacement of current carrying copper conductor 10 sqmm x 3.5 core PVC flat sheathed flexible type -20 RM (xiv) Replacement of Limit switches for LT ,CT and hoist along with Master conroller (xv) Replacement of power wiring of main panel with 6 sqmm flexible copper conductor for LT motion -01 job (xvi) Replacement of overload relay-01 Job '(xvii) Crane shall be painted with two coats of zinc cromate primer followed by two coats of golden yellow synthetic enamel paint.

Supply and fixing in replacement of shrounded type TPN PVC insulated GI conductor DSL system having 63 Amps rating (Run of 03 Phase & 01 Neutral will be count as 01 RM) complete including welding works as per site requirement complete all as specified and directed. Note:- Cost of necessary T&P required for fixing of DSL system in Hangar upto 20 mtr height are deemed to be included in the quoted rate.

Supply and fixing in replacement of shrounded type TPN PVC insulated DSL Bus bar current collector for DSL system having capacity up to 250 Amps rating (03 Phase & 01 Neutral) complete including welding works as per site requirement complete all as specified and directed. Make : Safeline/Safe track

S&F in replacement of VVVFD -2 HP ATV310, 1.5 KW 380-460 V 50/60 HZ drive complete all as specified and directed.Make:- Schneider or equivalent as approved by GE.

S&F in replacement of VVVFD -3 HP ATV310, 2.2 KW 380-460 V 50/60 HZ drive complete all as specified and directed.Make:- Schneider or equivalent as approved by GE.

S&F in replacement of VVVFD -5 HP ATV310, 3.7 KW 380-460 V 50/60 HZ drive complete all as specified and directed. Make:- Schneider or equivalent as approved by GE.

S&F in replacement of VVVFD -7 HP ATV310, 12.5 KW 380-460 V 50/60 HZ drive complete all as specified and directed. Make:- Schneider or equivalent as approved by GE.

Supply and fixing in replacement of remote control/ Pandent 110 V AC with remote capacity 0.5 Ton EOT crane for controlling LT, CT and crane hook motion including taking down old unseviceable remote complete all as specified and directed. Make- USGC or equivalent as approved by GE.

Supply and fixing in replacement of remote control/ Pandent 110 V AC with remote capacity 01 Ton EOT crane for controlling LT, CT and crane hook motion including taking down old unseviceable remote complete all as specified and directed. Make- USGC or equivalent as approved by GE.

Supply and fixing in replacement of remote control/ Pandent 110 V AC with remote capacity 03 Ton EOT crane for controlling LT, CT and crane hook motion including taking down old unseviceable remote complete all as specified and directed. Make- USGC or equivalent as approved by GE.

Supply and fixing in replacement of remote control/ Pandent 110 V AC with remote capacity 10 Ton EOT crane for controlling LT, CT and crane hook motion including taking down old unseviceable remote complete all as specified and directed. Make- USGC or equivalent as approved by GE.

S&F in replacement of power contactor 3 pole, 9 Amps, type MNX, 415 volts including taking down old unserviceable contactor complete all as specified and directed. Make : L&T / LS / HPL

Supply & fixing in replacement of three pole power contactor 3 phase 415V, AC3, 25 Amp. ML-1.5 with 2 NO. + 2 NC. Aux Contect Coil Voltage 110V AC complete all as specified & directed. Make:- L&T Cat Part No.SS91851/Siemens/BCH

Supply & fixing in replacement of three pole power contactor 3 phase 415V AC3 32 Amp. ML-2 with 2 NO. + 2 NC. Aux Contect Coil Voltage 110V AC complete all as specified & directed. Make:- L&T Cat Part No.SS90701/Siemens/BCH

Supply & fixing in replacement of three pole power contactor 3 phase 415V AC3 70 Amp. ML-4 with 2 NO. + 2 NC. Aux Contect Coil Voltage 110V AC complete all as specified & directed. Make:- L&T Cat Part No.SS90910/Siemens/BCH)

Supply & fixing in replacement of of push button station 8 Way Made out poly carbonate / Alumunium dia cast with 8 No. push button with element complete all as specified & directed.Make USGC/L&T/ Speedage

Supply & fixing in replacement of AC Drive(VVVF) 7.5KW G7 HD 3 Phase 415V AC complete all as specified & directed. Cat No.:- CIMR-G7A47P51/ LTVF-S20040BAA of make Yaskawa/ L&T/ Siemens

Supply and fixing in replacement of limit switch suitable for EOT crane of capacity upto 10 Ton crane including taking down old unserviceable limit switch complete all as specified and directed.

M&L for fabrication work with using 3mm CRCA Sheet for arresting water leakage in controlling panel of EOT crane of size upto 1500 mm x 1500 mm x 60 mm with suitable fastening element like nut, bolt, hinge/ welding required complete all as per site requirement,specified and directed.

Bluemax Associate

Deep Contractor

M/S S.K.Electricals

V r traders

Neeraj Enterprises