REPAIRS TO APPROACH PATH, KERB STONE, DRAIN, HARD STANDING, SHEDS, RETAINING WALL, BOUNDARY WALL, FENCING AND CERTAIN WORKS UNDER AGE B/R LEKHANAGAR.

Amount

Dismantling barbed wire fixed to any type of standard rails straining bolts (each line wire to be measured).

Dismantling RCC posts or struts any section, embedded in concrete, brick work, masonry etc. including taking out embedded portion and making good disturbed ground.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth round, in layers not exceeding 25 cm in soft/loose soil.

M&L for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire.

Supply only chain link MS galvanisd fencing, any size or type.

S & F 4mm dia plain mild steel wire, galvanised class 3 in fencing including straining and fixing to concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed (each line of wire to be measured).

S&F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured).

S & F flat iron fillets (for securing wire mesh, chain link fencing etc.) including all necessary drilling, bolting or riveting etc., MS stiffener bars for chain link fencing and similar work.

S & F mild steel screw bolts (machine made) diameter of neck 5 to 10mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm.

M&L for preparing new untreated steel or iron surfaces any description exc 10cm width or girth and two coats of aluminium paint over and including a coat of red oxide zinc chrome primer.

M&L for preparing new untreated steel or iron surfaces any description n.exc 10cm in width or girth and two coats of aluminium paint over and including a coat of red oxide zinc chrome primer.

Demolition of cement concrete in any description and in any position.

M & L Cement concrete Type D2 1:4:8 (40 mm graded aggregate) in surface channels and drains

Demolition of concrete in ground floors and pavings n exc 15cm thickness (below or above ground level).

M & L Cement concrete Type D2 1:4:8 (40 mm graded aggregate) in foundations,filling and mass concrete.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, usingex-tra cement, including forms, moulds, mi-tred/stopped ends etc.

Extra for forming fair finished drain or channel 60cm inner girth in cement concrete, usingex-tra cement, including forms, moulds, mi-tred/stopped ends etc.

Demolition of Brickwork or stone boulder masonary,built in cement mortar including all quoins,arches,pillars,etc but excluding ashlar facings,dressed stonework and precast concrete articles.

M & L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius,built in cement mortar 1:6.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work finished fair and even.

M&L preparation of newly plastered surfaces and applying two coat of cement base paint on wall complete all as specified and directed.

M&L for Moorum filling in pavings or road berms, laid in layers n exc. 15 cm thick, spread, levelled and rolled including watering. (moorum to be brought from outside MoD land)

Dismantling stone slabs and tiles of any thickness in floors, aprons etc. laid bedded and pointed in any mortar

M&L for chequered cement concrete tiles with grey cement and pigment 30cm x 30cm x 25mm thick, with rubber moulded glossy finished surface, laid in floors over and including 15mm thick cement mortar screed bed in cement mortar 1:6, set jointed and pointed in neat cement slurry in floors.

M&L for rough finished shahbad stone slab 18-25mm thick, inclunding 15mm thick screed bedding laid and jointed & pointed in CM 1:4 all as specified & directed.

M&L for machine pressed precast conctete interlocking paver block with grey cement and pigment with rubber moulded glossy finished surface, any shape and size confirming to IS 15658-2006 of 40 mm thickness M-25 grade laid over and including 30 mm thick sand cushion.

M&L for machine pressed precast conctete interlocking paver block with grey cement and pigment with rubber moulded glossy finished surface, any shape and size confirming to IS 15658-2006 of 60 mm thickness M-30 grade laid over and including 30 mm thick stone dust cushion.

M&L for providing factory made precast cement concrete type B-1 1:2:4 (20 mm graded aggregate) kerb stones with smooth rubber moulded finish, including chamfers, weatherings, etc. and setting in mortar 1:4 complete with joints to match including necessary earthwork.

M&L for preparing new or un treated brick, stone, concrete, asbestos cement or plaster surfaces of any description over 10cm girth or width, not otherwise described and two coats of synthetic enamel paint over and including priming coat.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings.

Dismantling wrought iron or mild steel work of any description such as purlins for roof and window guard bars.

Supply and fixing steel work in tubular or rectangular hollow section in rafters, purlins etc. and connected works complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for preparation of new or previously untreated steel or iron surfaces of any description over 10cm width or girth and two coats of synthetic enamel paint over a coat of red oxide primer.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) in beams, staircases, cooking platform, shelves, landing, chajjas and similar suspended work.

M&L for factory made pre cast reinforced cement concrete 1:2:4 type B1 (using 12.5 mm graded stone agg) as in manhole cover slabs and similar works including necessary form work and reinforcement 10 mm TMT bar set in CM 1:6 all as specified and directed

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 71,650.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

Abhiraj Enterprises

Alpha Construction

M/S K. K. Construction

Srujan Associates

SVT ENGINEERS AND CONTRACTOR.

M/S SAMEER SUBHASH PATANI

Bidder Name

M/S SAMEER SUBHASH PATANI

SVT ENGINEERS AND CONTRACTOR.

M/S K. K. Construction

Alpha Construction

Vinod Enterprises

Srujan Associates

Abhiraj Enterprises