COMPLETION OF INCOMPLETE WORKS FOR PROVISION OF R AND I STORE BUILDING NEAR GATE SECURITY OFFICE INSIDE TECHNICAL AREA DMSRDE, KANPUR (RISK AND COST CONTRACT)

Amount

Schedule 'A' -Section-I (Building Work) Lump sum price worked out by the Contractor for "COMPLETION OF INCOMPLETE BUILDING WORK” for Construction of R&I Store Building complete all as specified and shown in drawings as listed at Srl Page No. 199 and 200 of tender. (RATES TO BE QUOTED BY THE BIDDERS BASED ON LEFT OVER ITEMS/WORKS TO BE EXECUTED FOR ENTIRE COMPLETION OF BUILDINGS IN ALL RESPECTS AS PER CA PROVISIONS).

Lump sum price worked out by the Contractor for “ INTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Section- II

Lump sum price worked out by the Contractor for “INTERNAL ELECTRIC SUPPLY” as listed in Schedule ‘A’ Section-III

Lump sum price worked out by the Contractor for “ROAD/PATH/CULVERT” as listed in Schedule ‘A’ Section- IV

Lump sum price worked out by the Contractor for “EXTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Section-V

Lump sum price worked out by the Contractor for “EXTERNAL ELECTRIC SUPPLY” as listed in Schedule ‘A’ Section- VI

Lump sum price worked out by the Contractor for “SEWAGE DISPOSAL” as listed in Schedule ‘A’ Section- VII

Lump sum price worked out by the Contractor for “EARTH WORK” as listed in Schedule ‘A’ Section- VIII

Schedule 'A' Section IX (MISC ITEMS OF WORKS) Note: This schedule is not prepriced by MES. Contractor has to quote their own rates.

Supply, install, testing and commissioning of addresable ionisation type smoke detector with junction box, base all as required complete.

Supply, install, testing and commissioning of addresableoptical type smoke detector with junction box, base all as required complete.

Supply, install, testing and commissioning remote response indicator with twin LED as per OEM complete.

Supply, install, testing and commissioning of intelligent addressable manual intelligent addressable type call point with box resettable type as per OEM complete.

Supply install, testing and commissioning of addressable electronic sounder cum strobe to provide audio visual indication of smoke or fire.

Supply Install testing and commissioning of single loop microprocessor based addressable type fire alarm central panel complying with BSEN 54 of capacity from 80 detector & 80 modules and module connected with uninterupted power supply (Ups) 700 VA single phase 50 Hz suitable size of copper cable complete.

M&L for pre-fabricated street light junction/distribution box of size 300 mm x 250 mm with hinged cover system made out 2mm thick MS Sheet/CR steel sheet, duly painted with two coats of synthetic enamelled paint over a coat of red oxide primer suitable for mounting on pole including fixing with GI clamp 50mmx6mm on pole and connecting incoming and outgoing connection with proper lugging including 02 Nos aluminium busbar suitable size connected and 01 No MCB, SPN 6, Amps 'C' series for control of light as per latest practice acting as control circuit for street light fitting complete. Note. (i) Box shall be fixed to steel pole at 1.5 metre GL. (ii) Quoted rate shall deem to be included cost of MCB.

Supply, fixing and connecting street light fitting 35 Watt LED with LED lamp and driver comprises die cast aluminium housing with pre wired gear minimum tray with heat resistance flat glass suitably gaskated for IP 65 protection complete including connection with three run of 2.5 Sqmm PVC insulted unsheathed multistranded copper conductor FRLS cable, 1100 Volts grade from junction box to light fittings to be fixed on steel poles complete. Note. (i) Fittings shall be of make Phillips Type BRP409LEDCW035NRFGSIPSUGR or equivalent model of make as specified in Appendix 'B' to particular specification. Light fitting of other make of Appendix 'B' to particular specification of higher capacity may be provided by the Contractor without any extra cost to the department. (ii) Light fittings shall be fixed on steel pole catered in serial No 6 of Schedule 'A', Section -VI. (iii) Quoted rate shall deem to be included cost of cable for connection.

Supply, fixing and connecting LED light fitting wall mounted batten with extruded aluminum housing with intregated electronic driver with LED tube aluminum extrusion 18 watt complete. Note. Fittings shall be of make BAJAJ Cat part No 18WCDL or HALONIX : CAT REF No : HLB - 03-18-CW-AL or equivalent model of make as specified in Appendix 'B' to particular specification. Light fitting of other make of Appendix 'B' to particular specification of higher capacity may be provided by the Contractor without any extra cost to the department.

Supply, fixing and connecting recess mounted mirror optic LED luminaire fitting with paralite P5 louvers 34 watt LED colour temperature 4000K to 6500K, dimention 595mm x 595mm fitting for grid type ceiling including intregrated electronic driver and other accessories complete. Note. Fittings shall be of make Havells ordering code LHEWEIP7WIW034 or equivalent model of make as specified in Appendix 'B' to particular specification. Light fitting of other make of Appendix 'B' to particular specification of higher capacity may be provided by the Contractor without any extra cost to the department.

Supply, fixing and connecting energy efficeant LED security light 240 Volt, AC, 30 Watt pressure die cast LED street light complete with 25mm dia Light grade GI pipe 1.20 metre long fixed to wall with FI 40x6mm clamps (2 Nos), nuts, bolts & washer including grounting of bolts in PCC (1:2:4) type B1 block of suitable size including 3 core 1.5 Sqmm FRLS PVC insulated copper conductor wire connection complete. Note. Fittings shall be of make Havells Cat part No LHETVXU7PAISO30 or C&S :ordering code : LTESSE30WLED or HALONIX : CAT REF NO - HLSLD-09-30-CWL-E-1 or equivalent model of make as specified in Appendix 'B' to particular specification. Light fitting of other make of Appendix 'B' to particular specification of higher capacity may be provided by the Contractor without any extra cost to the department.

Supply only LED lamp 12 watt 240 volt , AC 0.9 PF B22 base for fixing in holder catered in schedule 'A' Part-III.

INCOMING : (i) MCCB with continuously adjustable electronic release ,4 Pole, 415 VAC, Current rating- 250 Amps, Ultimate breaking capacity - 35/36 KA - 01 No BUS BAR : (i) Electrolytic Aluminium bus bar of adequete size for all phase conductor & neutral conductor with heat shrinkable PVC sleeves and colour coded in Red, Yellow, Blue and Black to identify the three phases and neutral of the system, supported on unbreakable, non hygroscopic DMC insulated supports at sufficiently close interval to prevent busbar sag - 01 Set. (ii) Current Transformer of ring type for LT Panel, insulated in Resin casted/reinforced in polycarbonate case of CT ratio 250/5, rated burden 15 VA , accuracy class - 1.0, Conforming to IS-2705/1992, IEC 60044 including making internal connection with FRLS PVC insulated Copper wire of size 2.5 Sqmm complete all as specified and directed = 03 Nos. (Contd next page )

Note : 1. The LT Feeder Pillar Box should be powder coated with pure polyester (PP) Powder of light grey shade suitable for outdoor use after phosphated by 7 Tank process. 2. The LT Feeder Pillar Box should be provided with godrej type three point locking arrangement, MS locking rod of 10 mm dia with protrude of minimum 10 mm at top & bottom should be provided to prevent opening of the door in locked condition. 3. The roof of Pillar box should be slightly slanting both sides to the front and back side 4. The bus bars should be conveniently placed so as to provide adequate clearance from the body of the box conforming to I.E. Rules applicable for L.T. supply. 5. Suitable cable glands of heavy duty, double compression type with detachable plates should be provided at the bottom of the pillar box. 6. The incoming & outgoing terminal of the cables is to be connected by Bimetallic lugs, gland duly crimped with die press crimping tools. 7. The body of the boxes shall have sufficient reinforcement with suitable size of channels and plateform /foundation with PCC, bricks etc.

Supply and fixing wall mounted fan, 3 blade (Aerodynamic blade) single phase 230 Volt, 1300 RPM, minimum air delivery 5220 CMH, 90 degree oscillation and speed control by pull cord 450 mm sweep including making all connection with three run of 1.5 Sqmm single core PVC insulted unsheated copper conductor FRLS cable complete. Note. Height for fixing shall be decided by GE.

Supply and fixing electric driven, single phase, Heavy duty Exhaust Fan, 300 mm sweep, 950 RPM Four blade, minimum air delivery 1145 Cubic metre per hour including louvers and connected with three run of 1.5 Sqmm single core PVC insulted unsheated copper conductor FRLS cable complete. Note. Fan shall be of make CROMPTION Cat reference : EXHD300-6- or equivalent model of make listed in Appendix 'B' to Particular Specifications.

MCB SPN, 32 Amps, 240 Volts, AC , 10 KA breaking capacity 'C' Series, for fixing in DBs catered in Schedule 'A' , Section -III.

MCB SP, 06 to 32 Amps, 240 Volts, AC , 10 KA breaking capacity 'C' Series, for fixing in DBs catered in Schedule 'A' , Section -III.

MCB TP, 63 Amps, 415 Volts, AC , 10 KA breaking capacity 'C' Series,for fixing in DBs catered in Schedule 'A' , Section -III.

Supply only PVC insulated , sheathed electric cable, FR 1100 Volts grade, two core having multistranded copper conductor of size 1.5 Sqmm nominal cross sectional area. Note. This cable shall be drawn in conduit included in the Schedule 'A', Section- III.

U.R ASSOCIATES (BID ID -3289476)

ASIA BUILDER (BID ID -3289238)