GE SU 63 2021 22 REPAIRS TO RETAINING WALL DRAIN BOUNDARY WALL AND MISC WORK IN OTM AND MD ACCN OF NCSR C COY NCSR CMDC 10 EW BN 1 EW BDE 135 I FD WKSP 9 RO FLT HELIPAD COLONY NSOI SPORTS COMPLEX 250 TRANSIT CAMP BIKRAM PARK TA

Amount

Demolition of Brick or stone masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed.

Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth for foundation, side of drain, wall and similar work etc, and area n.exc.10 Sq.m on plan and getting out in hard/dense soil complete all as specified and as directed.

Returning, filling in with approved soil obtained from excavation including spreading levelling, watering and well ramming in layers n.exc. 25cm thick all complete all as specified and as directed.

Removing excavated soil to a distance exc 50m and nexc1.50 km out side defence land complete all as specified and as directed.

M&L Brick work with sub class 'B' brick, straight or curved on plan exc 6m mean radius built in type CM 1:6 complete all as specified and as directed.

All as per srl item No 6 above but except brick only complete all as specified and as directed.

Random rubble masonary, uncoursed, well bounded, bedded and solidly hearted, build in cement mortar 1:6 compelte all as specified and directed

All as per srl item No 7 above but except stone complete all as specified and as directed.

Extra over stone walling for hammer dressing 20mm to face to sand stones and dressing to face stone and dressing of face beds and joints, as specified, of randon rubble walling, uncoursed or brought upto courses complete all as specified and as directed.

M & L for flush pointing in CM 1:4 to random or polygonal ribble uncoursed or brought upto courses complete all as specified and as directed

Providing cement concrete type B-0 (1:2:4) using 12.50 mm graded crushed stone aggregate as in coping including necessary form work complete all as specified and as directed.

M&L for hand packing with broken stone or boulders (any thickness) at back of wall over arches etc and rising (or lowering) to the required level complete all as specified and directed.

Raking out joints/pointing to brick work in walls or to block in course masonry, or concrete block walling complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling old serviceable/unserviceable barbed wire including removing of unserviceable barbed wire from site and serviceable materials kept in safe custody for reuse complete all as specified and as directed.

S&F in repair galvanised two strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbed at 75 mm spacing and straining and fixing to any type of standard rails straining bolts ,including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins complete all as specified and as directed.

Fixing only old serviceable barbed wire complete all as specified and as directed.

M&L for framed work such as doors, gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding eith and including either hooks and hinges or steel hanging door fittings including ornament and intricate design, including pintle hings, stops hand made sliding bolts etc conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

Mild steel conforming to grade Fe-165 (Fe-290) angle post or struts in fencing fixed independently including cutting and bending to shape as directed drilling holes, notching for wire etc,complete all as specified and as directed.

Applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer of any description over 10cm in width or girth not otherwise described including preparatin of new steel surfaces complete all as specified and as directed.

Applying one coat of synthetic enamel paint including preparatin of old steel surfaces over 10cm width or girth complete all as specified and as directed.

Distmantling chain link fencing any type complete all as specified and as directed.

Excavation in post holes each not exceeding 0.50 cum getting out, returning filling in and well ramming earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50 mtr and making good distrub surfaces as in hard/dense soil complete all as specified and as directed.

Supply only chain link M S galvanised fencing complete all as specified and as directed

Fixing only chain link fencing including link wires, any mesh size and type to any type of standard rails straining bolts etc including provn of binding wire complete all as specified and as directed.

Demolition of cement concrete (Reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) including removing the rubbish/debris out side MOD land complete all as specified and as directed.

RCC 1:1.5:3 type A1 using 20mm graded crushed stone crushed stone aggregate in foundation, including rafts, footings beams, plinth beams, bases for columns etc, undereamed piles and mass concrete columns supported on walls, piers posts and strut etc complete all as specified and as directed.

RCC 1:1.5:3 type A1 using 20mm graded crushed stone aggregate as in beams, complete all as specified and as directed.

RCC 1:1.5:3 type B1 using 20mm graded aggregate in foundation, including rafts, footings beams, plinth beams, bases for columns etc, undereamed piles and mass concrete columns supported on walls, piers posts and strut etc complete all as specified and as directed.

Use and waste of form work to side of pillars, posts, strut pier columns and stanchion, rough finished flat surface of concrete complete all as specified and as directed.

Use and waste of form work to side of concrete foundations footing, bases of columns raft and raft beams sides and soffits (if any) of foundations and plinth beams and similar work vetrical or to batter rough finished flat surface of concrete complete all as specified and as directed.

Mild steel TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for colums,hooking ends, and including mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per Ser No 32 above but 6mm to 8mm dia as in stirrups complete all as specified and as directed.

S & F punched tape concertina coil (including spike and handle) with 50 turns and 1050mm dia, width of barbed 9mm dia width of barbed 9mm and spacing of clips 23.5 mm to 24.5mm c/c weight of coil will be 10 to 14 kg without packing. Coil length will be 6m when opened up etc complete all as specified and as directed.

Precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in manhole/drain slab cover all as specified and set in cement mortar 1:4 complete all as specified and as directed.

Demucking of filled earth soil in drains of any size, depth or section in condition as per site reuirement complete all as specified and as directed.

Removing excavated materials (soil) to a distance n exc 50m and deposited where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

Demolition cement concrete in ground floors and paving ( unreinforced ) nexc. 15 cm thickness ( below or above ground floor) complete all as specified and as directed.

M & L for PCC 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) as in surface channel and drains including necessary formwork and extra forming fair finished drain or channels for inner girth in cement concrete etc complete all as specified and as directed.

M & L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in sub base of floors and pavings, etc complete all as specified and as directed.

M & L and sand cushioning/filling under floors or laying interlocking tiles complete all as specified and as directed.

M & L for machine pressed precast concrete interlocking paver blocks lacquor finish any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing off the premises complete all as specified and as directed.

M&L screed bed or bedding layers of 15mm thick cement mortar 1:6 for laying floor finishes complete all as specified and as directed.

M & L for providing 75 mm thick, plain cement concrete 1:4:8 type D-2, using 40 mm graded aggregate as in sub base of floors complete all as specified and as directed.

M & L for lacquar coated Chequered tiles 30cmx30cmx20-25mm thick, set jointed and pointed in neat cement slurry as in path with white cement and pigment etc complete all as specified and as directed.

Taking down cement plaster, any description on brick or stone or cement concrete surfaces of walls including raking out joints, hacking for key, scrubbing down with water etc, including removing the rubbish/debries outside MoD land complete all as specified and as directed.

15mm thick rendering in two layer (10mm+5mm) on fair faces of brick/concrete surfaces of walls in cement mortar 1:4 and finished even and fair without using extra cement complete all as specified and as directed.

15mm thick rendering in two layer (10mm+5mm) on fair faces of brick/concrete surfaces of walls in cement mortar 1:6 and finished even and fair without using extra cement complete all as specified and directed.

S & F for mild steel galvanised 3.15mm dia wire made for chain link fencing, size of the mesh 75mmx75mm so as to filled with broken stone boulders fixed as required at site for earth retaining surface complete all as specified and as directed.

M&L for two coats cement base paint on new plastered surfaces including preparation of surfaces complete all as specified and as directed.

M&L for one coats of cement base paint on old plastered surfaces including preparation of surfaces complete all as specified and as directed.

M& L as in repairs for providing precast cement concrete louver jallies, 25 mm thick (measured solid), 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) including all mouldings set with CM (1:4) complete all as specified and as directed.

M & L for Dura stone ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

S&F for PVC (SWR) pipes(110mm dia) single socketed in any length with rubber joints laid in trenches, floor and similar work complete all as specified and as directed.

Dismantling post or struts (wood,steel or RCC) any section including taking out embedded portion and making good disturbed ground, post embedded in natural ground complete all as specified and as directed.

Mild steel Round bars 10mm dia and over, cut to length, bent to shape required, including bending,hooking ends, with mild steel wire not less than 0.9mm dia or securing with clips quality conforming to Fe-290 Gde E-165 as in chian link fencing complete all as specified and as directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed at the other or screwed both ends , each screwed ends to be fitted with washers and one hexagonal or square nut, length exc 5 cm but n exc 10 cm dia of neck 11 to 15mm complete all as specified and as directed.

SINGH CONST CO

anil construction co.

VISHWANATH AND SONS

M/S ASHOK KUMAR PACHIALA

RAMAN CONSTRUCTION CO

sohtra and co

PARDEEP SHARMA