Boundry Wall, tinshed and other Repair work Municipal Corporetion Depot South Assembly Ward 53. File No. 74/26X3/3.

UAD SOR 2021 Vol-2, I.No-2.6.1/ P. No- 17,Earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical /manual means(exceeding 30cm in depth.) including ramming of bottom, dressing of sides, disposal of excavated earth including of all lift and lead upto 50m. Disposed earth to be levelled and neatly dressed. 2.6.1 All kinds of soil

UAD SOR 2021 Vol-2, I.No-5.11.4/ P. No- 47 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/ inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of IS : 13920; IS 456 & SP :34) etc. complete. TMT bars..

UAD SOR 2021 Vol-2, I.No-5.1.1/ P. No-46 P/L in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate.

UADSOR 2021Vol-2,I.No-19.1.1/P.No-208 Centering and shuttering including strutting, propping etc.and removal of form.for Foundations, footings, bases of columns, etc. For mass concrete.

UAD SOR 2021 Vol-2, I.No-6.3.2/ P. No-56 Brick work with chimeny brick of class designation 40 in superstructure above plinth level upto floor 2 level including the cost of scaffolding in :Cement mortar 1:6(1 cement : 6 coarse sand)

UADSOR2021Vol-2,I.No-10.14.1.2/P.No-118 Steel work welded in built up sections/ framed work including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

UADSOR 2021 Vol-2,I.No-10.15.1/P.No-118 Steel work in built up M.S. tubular section (round, square or rectangular Hollow tube etc.) trusses/frame work etc./ railing work etc. i/c cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete.Hot finished welded type tubes.

UAD SOR 2021 Vol-2, I.No-13.46.3/ P. No-164 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture

UAD SOR 2021 Vol-2,I.No-13.1.2/ P.No-160 12mm cement plaster of mix : 1:6 (1cement: 6 fine sand)

UAD SOR 2021, Vol-2, I.No-13.25/ P. No-162 Providing and applying 1.0 mm thick white cement based wall putty of best quality, over plastered surface to prepare the surface even and smooth complete.