PERIODICAL SERVICES TO MD/OTM ACCN AT CABS AND INS TANAJI, NOFRA, NSB AND PERIODICAL SERVICES TO CHANGES COLOUR SCHEME AS APPROVED FOR VARIOUS BUILDINGS AT NOFRA AND INS TANAJI AND WELCOME MAINTENANCE TO MD ACCN UNDER GE (NW) MANKHURD

Amount

M&L for Ready mix plaster 10 mm thick on fair faces of bricks or concrete surface including necessary scaffolding upto 24m height etc incl taking down cement or cement lime plaster of any description on brick or stone walls, including raking out joints, hacking for keys, scubbing down with water complete all as specified and directed.

M&L for Ready mix plaster 5 mm thick on fair faces of bricks or concrete surface including necessary scaffolding upto 24m height etc incl taking down cement or cement lime plaster of any description on brick or stone walls, including raking out joints, hacking for keys, scubbing down with water complete all as specified and directed.

M&L for Ready mix plaster 12 mm thick on fair faces of bricks or concrete surface including necessary scaffolding upto 24m height etc incl taking down cement or cement lime plaster of any description on brick or stone walls, including raking out joints, hacking for keys, scubbing down with water complete all as specified and directed.

M&L for preparing new plastered surface of walls, and applying two coat of distemper oil emulsion over a coat of alkali resistant priming paint complete all as specified and directed

M&L for preparation of newly plastered surfaces of celings and applying two coats of distemper oil emulsion complete all as specified.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

Material & Labour for applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm.

Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over Old existing paint surfaces by scraping, washing with high pressure pumps rubbbing etc surface of walls ,chajjas, soffits & beam including necessary double scaffolding (building ht upto 24mtr) with out damages the existing wall surface etc, complete all as per manufacturer instruction and all as specified and directed.

M&L for complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour including necessary scafolding height upto 24m complete all as directed.

M&L for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

M&L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. Note for Item No 1 to 10 above (a.) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Cement base paint, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (b.) The contractor shall upload along with the documents under cover-I, ‘Memorandum of Understanding’ (MOU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected.

M&L Preparation of old plastered or un-plastered surface of ceiling and applying one coat of oil bound distemper complete all as specified and directed.

M&L Preparation of old plastered or un-plastered surface of wall and applying two coat of distemper oil-emulsion of white or tinted and over a coat of putty 3mm thick complete all as specified and directed.

M&L Preparation of old plastered or un-plastered surface of wall and applying two coat of plastic emulsion paint of white or tinted and over a coat alkali resistant primer complete all as specified and directed.

M& L for preparing old surfaces walls of distempered & painted surfaces and applying one coat of oil bound distemper complete all as specified

M& L for 3mm thick wall care putty on wall/ceiling (brand Apex Ultima manufactured by Asian or Brand weather coat Maxx manufactured by Berger or equivalent as approved by GE) building ht upto 24mtr including necessary scaffolding and complete all as per manufacturers instructions

M& L for preparation of new / old existing surfaces by scraping, washing rubbbing etc surface of walls ,chajjas, soffits & beam including necessary scaffolding and applying one coat of exterior cement based water proofing putty (brand Apex Ultima manufactured by Asian or Brand weather coat Maxx manufactured by Berger or equivalent as approved by GE) building ht upto 24mtr complete all as per manufacturers instructions

M& L preparation of old painted wooden surface of any description not other wise described , over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified

M& L preparation of old painted steel surface of any description not other wise described , over 10cm width or girth and applying one coat of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified

M&L for preparation of existing old surfaces of wall, chajjas, beams, parapets etc, filling of cracks after cutting the same to V shape approximate 10mm wide and upto full depth of cracks with Chemistic crack seal caulking compound (Acrylic sealant) of M/s. Chemistik or equivalent of Dr. Fixit or of M/S STP Ltd as approved by the GE, also including necessary scaffoldings etc, complete all as specified and directed.

M&L for leak/seapage proof coating consisting of preparing the surfaces of Newly plastered or existing exterior walls, parapet walls chajjas etc, with wire brush to remove all loose dirt, oil grease etc, and filling cracks above 5mm thickness with Dr Fixit Pidicrete URP or with plaster seal of STP Ltd and cracks less than 5mm with Dr Fixit Crack X powder or with plaster seal of STP Ltd and applying one coat Dr Fixit primeseal primer or STP Ltd (and allow to dry for 8 hrs) under torch dry condition and subsequently two coats of water proof decorative elastomeric coating system; of Dr Fixit Raincoat with DFT 100 microns or shalicry 215 of STP(The surface after painting one coat shall be allowed to dry at 6 hours befor next coat) etc, complete all as per manufacturer instruction and all as specified and directed.

Removing plant/growth including its roots upto 1.00m of plant height at any location/at any storey and of any description and treating the surfaces with Acid (HCL) and making good surfaces with cement mortar 1:4, complete all as specified and directed.

S&F in repairs110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls all complete all as specified and directed.

S&F 110mm bore PVC (SWR) branch piece single (Single Y ) equal or unequal

S&F 110mm bore PVC (SWR) bend

S&F in repairs150 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls all complete all as specified and directed.

S&F 150mm bore PVC (SWR) branch piece single (Single Y ) equal or unequal

S&F 150mm bore PVC (SWR) bend

M&L non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.18 Sqm, as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over 15mm thick CM 1:6 screed bed for laying floor finishes including dismantling floor hearth or wall tiling or stone slab incl removal of cement mortar bedding (but not backing) removing serviceable tiles store & rubbish complete all as specified and directed.

M&L for coloured glazed ceramic tiles 200x300x6/300x450x6 to 7mm on vertical surfaces such as skirting,dado etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10mm thick cement mortar backing coat in CM 1:4 etc, including dismantling floor hearth or wall tiling or stone slab incl removal of cement mortar bedding (but not backing) removing serviceable tiles store & rubbish complete all as specified and directed.

M & L for Machine cut cudappah stoneslab 20-25 mm thick over cementscreed base, laid and mixedwith pigment to match the shade of the slab window cills and jambs to full thickness of wall fixed in steps over cement screed bed 10mm thick in CM 1:4 and jointed with grey cement paste and slurry including rubbing and polishing including dismantling floor hearth or wall tiling or stone slab incl removal of cement mortar bedding (but not backing) removing serviceable tiles store & rubbish complete all as specified and directed

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. over screed bed or bedding layer of morar 15 mm in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling floor hearth or wall tiling or stone slab incl removal of cement mortar bedding (but not backing) removing serviceable tiles store & rubbish complete all as specified and directed

Taking down carefully existing aluminium sliding window shutters, taking down of existing broken 4.80 mm thick plain sheet glass from aluminium sliding window shutters including existing rubber gasket complete, supply and fixing 4.80 mm thick plain sheet glass with and including provision of new rubber gasket and re-fixing the shutters in existing position, complete all as specified and directed. Note: only Glass will be measured

Taking down carefully existing aluminium sliding window shutters, taking down of existing stainless steel wire mesh from aluminium sliding window shutters including existing rubber gasket complete, supply and fixing stainless steel wire mesh of dia 0.36 mm and average width of aperture 1.40 mm with and including provision of "U" clip, re-fixing the shutters in existing position, complete all as specified and directed. Note: only wiremesh will be measured

S& F in repairs brass chromium plated rod 20 mm dia, complete all as specified and directed.

S&F in repair brass chromium plated bracket for 20mm dia curtain rod, complete all as specified and directed.

M & L for 18mm Plywood, grade BWP, type BB fixed with screws to timber frame work , fixed with screws to timber frame work including beadings etc,including dismantling boarding any description fixed in any position complete all as specified and as directed.

M & L for 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work including dismantling boarding any description fixed in any position complete all as specified and as directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised (width of flap 30 mm when open)

S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets 10 Ltr capacity compte all as specified and directed .

S&F in repairs Vitreous china wash down water closet pan “Pedestal Pattern” coloured with wc seat cover coloured closed pattern with flat bottom and mild steel chromium plated or aluminized hinging device including pvc flush pipe and joints etc and connection to drain, flushing, pipe, anti- syphonage pipe, and fixing arrangements with fixing bolts etc ,complete all as specified and directed

S&F in repairs Vitreous China squatting pan “Orissa ” pattern size 580 X 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe ) including connecting to trap and to flushing pipe, etc including making good to dismantled portion of floors with P:C:C type B-0 complete all as specified and directed.

S&F in repairs hand shower (health Faucet) with 8mm dia 1 mtr Long flexible tube & wall hook complete all as specified .

S & F for Toilet paper holder coloured complete all as specified and directed.

Supply & fix 15mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors, including taking up or down steel water tubing and connections complete all as specified and as directed

Supply & fix 20mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors,including taking up or down steel water tubing and connections complete all as specified and as directed.

S&F in repairs 15mm dia of chromium plated Angle valves, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for and fixed

S&F PVC connections 15mm size with PTMT nuts of length 600mm

S & F in repairs Vitreous China Wash hand basin white, flat back, size 550x400 mm size (flat back or angle back type)excluding taps, waste, chain and plug and procelaim stopper but including cutting for and pinning ends of brackets or erecting stand.incl taking down pillar tap complete all as specified and directed Note : A sum of Rs 4,065.00 towards sch of credit shall be deducted to arrive the contract sum.

GAJANAN SALES CORPORATION

M/s Hari Om Construction

mp construction co

AM ENTERPRISES