PROVIDING AND FIXING OF ROLLER BLINDS IN OFFICE OF LD REGISTRAR, JOINT REGISTRAR, O.S.D IN HONBLE PUNAB AND HARYANA HIGH COURT, SECTOR 1 CHANDIGARH.TE 6 IN TH HONBLE PUNJAB AND HARYANA HIGH COURT, CHANDIGARH

Providing and fixing of Sheer Dimout Blinds Hardware Specification Roller Tube: Made up of High Strength Anodized Aluminium alloy Extruded grooved tube. Size:40mm outside diameter, weight = 220gms/running mtrControl Unit with Clutch Mechanism: The control unit is made of high strength reinforced plastic.The clutch is of warp spring design. High carbon steel springs are provided to transmit motion from thedriven mechanism Clutch is operated directionally by the use of beaded endless chain to raise and lowerthe blind smoothly to decide height.Idler: Idler is of high strength reinforced plastic, consisting of an outside sleeve and centre shaft. Sleeveprovide bearing surface for centre shaft and rotate freely, providing smooth, quiet and long wearing operation.Round Type Bottom Rail: This is made up of high Strength aluminium alloy Extruded tube, White ispowder coated in white. Size: 14mm outside dia.; weigh: =220gms/running mtr Triangle type BottomRail: This is made up of high Strength aluminium alloy Extruded tube, which s powder coated in whiteSize: 15x24x24mm; Weight 230 gms/running mtr.Valance Rail: This is aluminium Extruded Rail made up of High Strength aluminium alloy, which isPowder Coated in White. Size: 84.5 mm Width; weight 320gms/running mtr. Ceiling Rail: This isaluminium Extruded Rail made up of High Strength aluminium alloy, which is Powder Coated inWhite. Size: 75.6X12mm; weight= 480gms/running mtr.Installation Bracket: It is made up of mild steel with white powder coatinghaving thickness of 1.8 mm.it is used for mounting control unit & idler.Ceiling Bracket: It is made up of mild steel with white powder coating having thickness of 1.0 mm. t isused to fix the blind to the wall or ceiling.Operating chain: This is made of 4.5 mm plastic beads molded on 2.0 mm thick polyester cord. Thepitch of the beads is 6mm. The chain drives the sprocket fixed in the end control unit to close and openthe blind. The pitch of the chain corresponds to the sprocket in perfect match for trouble free operation.End Cap: End cap for triangular bottom rail, round bottom rail, Ceiling rail and valance are made up ofhigh strength molded plastic in white colour. Fabric: Technical Data, Composition 100% Polyester, Finished Width 280 Cm, Weight 148GSM +-5% Thickness 0.85mm+_5% stripe size-solid14cm /Mesh9.5cm

Providing and fixing of plyboard consisting of 18 mm thick plyboard on the exisitng wall/undulatory glazing fixed with gutties, nails, screws etc. for providing firm base to sheer blinds complete as per entire satisfaction of the Engineer in charge. N.S