Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.5 LAccepted-AOC | L1 | Accepted-AOC Lowest and reasonable bid | |
| 2 | L2₹23.4 L+₹4.6 L (24.4%)Rejected-Finance | L2 | Rejected-Finance Other than the lowest bid | |
| 3 | L3₹24.8 L+₹6.0 L (31.7%)Rejected-Finance DHANGU ROAD PAHTANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L3 | Rejected-Finance Other than the lowest bid | |
| 4 | L4₹25.2 L+₹6.4 L (34.0%)Rejected-Finance 4201 NAGLA PRITHVI NATH SHAHGANJ AGRA 282010 | AGRA | AGRA | UTTAR PRADESH | 282010 | L4 | Rejected-Finance Other than the lowest bid | |
| 5 | L5₹26.5 L+₹7.7 L (40.8%)Rejected-Finance | L5 | Rejected-Finance Other than the lowest bid |
| Sl No | Description | Qty | Unit | M/S INDAN FURNITURE MART L3 | om parkash and sons L5 | SANMATI UDYOG L2 | KHAZAN SINGH SAWHNEY L4 | BALWINDER SINGH AND SONS L1 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | CHAIR SCHOOL WITH HARD BOARD (Drg No FD/E6/MAP/05 Sh 1/1)
Replacement of PVC seat, 4mm thick with 4x10mm ribs running in longitudnal & transverse direction, moulded internally with seat, to be fitted with screws made of alumunium alloy complete all as specified. | 200 | Each | 300 ₹60,000 | 300 ₹60,000 | 1,000 ₹2,00,000 | 220 ₹44,000 Lowest | 320 ₹64,000 |
| 1.01 | S&F openable top, 18mm thick prelaminated particle board of extenior grade conforming to IS-12823 (Including supporing clamps as per drawing duly screwed with openable top) duly fitted to slide on the right frame. The edge of top shall be provided with 1.5mm thick PVC beading fixed with wire nails complete all as specified. | 200 | Each | 150 ₹30,000 | 300 ₹60,000 | 150 ₹30,000 | 120 ₹24,000 | 80 ₹16,000 Lowest |
| 1.02 | Taking out U/S rubber shoe and SF rubber shoes size and shape exists all as shown on drg. | 800 | Each | 5 ₹4,000 Lowest | 5 ₹4,000 Lowest | 5 ₹4,000 Lowest | 6 ₹4,800 | 5 ₹4,000 Lowest |
| 1.03 | Material and labour for Preparation of old painted steel surfaces of chair school with hand board , cleaning including removing dents if any, priming dents portion and applying one coat of synthetic enamel paint of black colour by spray painting (with spray Gun) complete all as spfd and directed by Engr-in- Charge. (Make of Synthetic Enamel Paint : Apcolite of Asian, superlac of Shalimar, nerolac of Good lass Nerolac, Berolac of Johnson & Nicholson). | 150 | Each | 20 ₹3,000 Lowest | 50 ₹7,500 | 40 ₹6,000 | 120 ₹18,000 | 60 ₹9,000 |
| 2.00 | CHAIR VARANDAH (Drg No FD/E6/MAP/01 SHEET 1/1
Welding to leg joints any size, electric arc or gas welding, joints of welded portion finished smooth complete all as specified. | 250 | Each | 5 ₹1,250 Lowest | 30 ₹7,500 | 40 ₹10,000 | 25 ₹6,250 | 30 ₹7,500 |
| 2.01 | M&L for seat & Back for chair varndah including removing of old unserviceable seat & back from the frame complete all as specified. | 250 | Each | 450 ₹1,12,500 | 400 ₹1,00,000 | 600 ₹1,50,000 | 580 ₹1,45,000 | 300 ₹75,000 Lowest |
| 2.02 | M&L for preparation of old steel surfaces of chair verandah and applying one coat of synthetic enamel paint (white) with brushes complete all as specified.
Make of Synthetic Enamel Paint: Asian, Shalimar, Nerolac, Burger, Johnson & Nicholson (1st quality) | 600 | Each | 15 ₹9,000 Lowest | 50 ₹30,000 | 20 ₹12,000 | 65 ₹39,000 | 20 ₹12,000 |
| 3.00 | CHARPOY GI PIPE (Drg No FD-220)
S&F in replacement, long rail, 1.88 m long made out of 32mm dia, GI pipe, medium grade, cut to required length, threading both ends and including taking out old unserviceable long rail from GI charpoy frame complete all as specified.
Make of pipe:- JINDAL/ TATA/ PARKASH/ BST/ OSWAL | 75 | Each | 450 ₹33,750 | 450 ₹33,750 | 350 ₹26,250 Lowest | 380 ₹28,500 | 450 ₹33,750 |
| 3.01 | Fixing only, in replacement, short rail, 0.815 m long made out from old long rail 32mm dia, retrieved from Srl item No 3.00 here-in-before including cutting and threading both ends & fixing in position including taking out old unserviceable short rail from GI charpoy frame complete all as specified.
Note:- Long rails retrieved from Srl Item No 3.00 shall be converted into two short rails and credit recovered for balance unservicable pipe. | 150 | Each | 50 ₹7,500 | 80 ₹12,000 | 20 ₹3,000 Lowest | 160 ₹24,000 | 50 ₹7,500 |
| 3.02 | S&F GI check nut duly threaded (ISI marked) suitable for 32mm dia GI pipe including taking out old unserviceable elbow from GI charpoy frame complete all as specified. | 50 | Each | 20 ₹1,000 Lowest | 20 ₹1,000 Lowest | 20 ₹1,000 Lowest | 25 ₹1,250 | 20 ₹1,000 Lowest |
Tender Value
₹27 L
EMD Value
₹54,000
Closing Date
13 Dec 2025, 6:00 pmClosed
GE (WEST) JALANDHAR CANTT
KABIR ROAD JALANDHAR CANTT
CERTAIN REPAIR WORKS TO TRADE PATTERN FURNITURE/MAP FURNITURE ETC FOR OTM ACCN AND MD ACCN OF JCOs/OR AND OFFR (RT LINE, KK VIHAR, VDJE) UNDER GE (W) JRC
2025_MES_740809_1
GE/JAL(W)-104/2025-26
Open Tender
Civil Works
Item Rate
270 days
JALANDHAR CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (WEST)
₹54,000
Yes
28 Feb 2026
24 Nov 2025
20 Dec 2025
24 Nov 2025
13 Dec 2025
8 Dec 2025
Amount
CHAIR SCHOOL WITH HARD BOARD (Drg No FD/E6/MAP/05 Sh 1/1) Replacement of PVC seat, 4mm thick with 4x10mm ribs running in longitudnal & transverse direction, moulded internally with seat, to be fitted with screws made of alumunium alloy complete all as specified.
S&F openable top, 18mm thick prelaminated particle board of extenior grade conforming to IS-12823 (Including supporing clamps as per drawing duly screwed with openable top) duly fitted to slide on the right frame. The edge of top shall be provided with 1.5mm thick PVC beading fixed with wire nails complete all as specified.
Taking out U/S rubber shoe and SF rubber shoes size and shape exists all as shown on drg.
Material and labour for Preparation of old painted steel surfaces of chair school with hand board , cleaning including removing dents if any, priming dents portion and applying one coat of synthetic enamel paint of black colour by spray painting (with spray Gun) complete all as spfd and directed by Engr-in- Charge. (Make of Synthetic Enamel Paint : Apcolite of Asian, superlac of Shalimar, nerolac of Good lass Nerolac, Berolac of Johnson & Nicholson).
CHAIR VARANDAH (Drg No FD/E6/MAP/01 SHEET 1/1 Welding to leg joints any size, electric arc or gas welding, joints of welded portion finished smooth complete all as specified.
M&L for seat & Back for chair varndah including removing of old unserviceable seat & back from the frame complete all as specified.
M&L for preparation of old steel surfaces of chair verandah and applying one coat of synthetic enamel paint (white) with brushes complete all as specified. Make of Synthetic Enamel Paint: Asian, Shalimar, Nerolac, Burger, Johnson & Nicholson (1st quality)
CHARPOY GI PIPE (Drg No FD-220) S&F in replacement, long rail, 1.88 m long made out of 32mm dia, GI pipe, medium grade, cut to required length, threading both ends and including taking out old unserviceable long rail from GI charpoy frame complete all as specified. Make of pipe:- JINDAL/ TATA/ PARKASH/ BST/ OSWAL
Fixing only, in replacement, short rail, 0.815 m long made out from old long rail 32mm dia, retrieved from Srl item No 3.00 here-in-before including cutting and threading both ends & fixing in position including taking out old unserviceable short rail from GI charpoy frame complete all as specified. Note:- Long rails retrieved from Srl Item No 3.00 shall be converted into two short rails and credit recovered for balance unservicable pipe.
S&F GI check nut duly threaded (ISI marked) suitable for 32mm dia GI pipe including taking out old unserviceable elbow from GI charpoy frame complete all as specified.
S&F GI elbow 3 way duly threaded (ISI marked) suitable for 32mm dia GI pipe including taking out old unserviceable elbow from GI charpoy frame complete all as specified.
S&F in replacement 12mm thick plywood, 7 ply, commercial BWR type, size 1980x900mm fixed with 10 nos bolts & nuts including washers (3 nos on long rail & 2 nos on short rail each) including S&F flat iron stiffeners/supports 3 nos made out of 40x4mm flat iron, 850mm long, welded to long rails, gap between rails and plywood top to be filled with 4mm thick 40mm wide , stiffeners/supports also to be fixed with plywood top with 2 nos bolts & nuts provided to each stiffeners/supports including painting to mild steel work with synthetic enamel paint black, including removal of unserviceable newar, tightening of check nuts, elbows, rails, legs etc complete all as specified.
TABLE PEG (Drg No FD-384) M&L for replacement of top of table, size 450mm x 300mm, made out of 18mm thick pre-laminated particle board (exterior grade) melamine faced ISI marked complete all as specified and as directed.
M&L for replacement of leg made out of 1st class hard wood (Sheesham), size and shape as shown on drg complete all as specified and as directed.
M&L for replacement of Long rail made out of 1st class hard wood (Sheesham), size and shape as shown on drg complete all as specified and as directed.
M&L for replacement of stiffners made out of 1st class hard wood (Sheesham), size and shape as shown on drg complete all as specified and as directed.
M&L for replacement of short rail made out of 1st class hard wood (Sheesham), size and shape as shown on drg complete all as specified and as directed.
M&L for preparation of surface of table with sand papers for smoothening, removing scratches, spot and dots etc and polishing with french polish complete all as specified and as directed.
M&L for providing PVC shoes of best quality including removing of old unserviceable PVC shoes complete all as specified.
MIRROR DRESSING GENTS (Drg No FD-E6/MAP/16) S & Fixed in repairs new back of dressing mirror gents made out of 12 mm thick commercial ply wood rest all as shown on drg and all as specified and directed.
Removing of existing unserviceable sides of dressing mirror gents and S&F new side of size 1200 X 100 mm made out of 18mm thick prelaminated MDF board exterior grade with decorative finish both side , rest all as shown on drg and all as specified and directed.
Removing of existing unserviceable side (Top/Bottom) of dressing mirror gents and S&F new side (Top/Bottom) of size 600 X 100 mm made out of 18mm thick prelaminated MDF board exterior grade with decorative finish both side, rest all as shown on drg and all as specified and directed.
S & F in repairs of glass shelves of dressing mirror gents 5 to 5.5 mm thick including supply & fixing of runner/glass holder to the dressing mirror gents, rest all as shown on drg and all as specified and directed.
S&F in replacement looking mirror 5.5mm thick backed by 12mm thick BWR grade ply as per IS-303 covered by decocrative PVC mould and supported on 50x28mm Teak wood frame complete all as specified. Make: Modi Guard/Saint Gobin
S&F in replacement of continous piano hinges to open the mirror frame in horizental circle complete all as specified.
S&F magnetic catch-02 Nos at top & bottom, inside the cabinet to catch mirror frame of best quality duly apporved complete all as specified.
Chair dining PVC Seat (FD/MAP-II/04 & FD/E6/MAP/10 or Similar) Removing the existing unserviceable rear leg and providing with new teak wood rear leg rest all as shown on drg and all as specified and directed.
Removing the existing unserviceable front leg and providing with new teak wood front leg rest all as shown on drg and all as specified and directed.
PVC Sheet
TABLE CENTRE (Drg No FD-274) M&L for replacement of table centre top of size 900x450mm made of 18mm thick prelaminated particle board (exterior grade) ISI marked including 18mmx4mm teak wood beading all round complete all as specified and as directed.
M&L for replacement of leg made of 1st class hard wood (Sheesham) size and shape as shown on drg complete all as specified.
M&L for replacement of front or rear rail made of 1st class hard wood (Sheesham) size and shape as shown on drg complete all as specified.
M&L for replacement of side rail made of 1st class hard wood (Sheesham) size and shape as shown on drg complete all as specified.
M&L for preparation of surface of Table centre person with sand papers for smoothening, removing scratches, spot and dots etc including providing bamboo pins to joints where required and polishing with french polish complete all as specified and directed.
CHAIR WRITING STEEL/CHAIR VISITOR STEEL (Drg No FD/E6/MAP/12 & TP ) S&F in replacement PVC arm of Chair Writing MAP with new PVC arm (2 Nos) all as per existing size, shape and pattern as shown on drg complete all as specified.
S&F in replacement of old unservicable cushion of back with new cushion 40 denisity, along with the fabric of approved quality & color with PVC lipping all around including new hot pressed plywood 12mm complete all as specified and as directed. Make: Kurlon or equivalent.
S&F in replacement of old unservicable cushion of seat with new cushion 40 denisity along with the fabric of approved quality & color with PVC lipping all around including new hot pressed plywood 12mm complete all as specified and as directed. Make: Kurlon or equivalent.
M&L for preparation of old steel surface of chair writing and applying one coat of black Japan paint (1st quality ) complete all as specified.
CHAIR COMPUTER (Drg No FD/E6/MAP/01 , TP & similar drg) S&F in replacement PVC arm of computer chair with new PVC arm (2 Nos) all as per existing size, shape and pattern as shown on drg complete all as specified.
S&F in replacement of old unservicable cushion with new cushion 40 denisity along with the fabric of approved quality colour and PVC lipping all around including new hot pressed plywood 12mm complete all as specified and directed. . Make: Kurlon or equivalent.
All as per Srl Item No 09.01 here-in-before but for back of chair complete all as specified.
S&F in replacement of nylon castor wheels complete all as specified.
S&F in of wheel base of suitable size to chair in complete set with wheels assesory complete all as specified.
S&F in replacement Gas lift pneumatic system cylinder and assesory complete all as specified.
CHAIR REVOLVING EXECUTIVE(HIGH/LOW BACK),CHAIR REVOLVING WITH ARMS:- TP Removing unserviceable seat, S & F new seat of 12 mm thick hot pressed plywood upholstered with fabric/leather as required matching with chair pattern & moulded polyurethane foam. The seat foam shall be designed with contour lumber support with PVC lipping all around / as per chair pattern. The cushions shall be of 40 density, thick (as per chair pattern) along with the fabric of approved quality & color. complete all as specified and directed.
All as per serial item No.10.00 here-in-before but for back of chair,complete all as specified and directed.
Removing unserviceable castor wheels, S & F new castor wheels as per the approved sample complete all as specified and directed.
Removing unserviceable hand rest, S & F new hand rest matching the previous all in shape,size,material & quality complete all as specified and directed.
Removing unserviceable pedestal assembly, S & F new pedestal assembly all matching the shape,size & quality of the previous, complete all as specified and directed.
Removing unserviceable synchro tilting mechanism & replacing with new synchro tilting mechanism, complete all as specified and directed.
M & L servicing the gas lift mechanism & making the seat adjustment functional, complete all as specified and directed.
TABLE COMPUTER (Drg No FD/E6/MAP-03 & TP) S&F in replacement computer table top made of 18mm thick prelaminated particle board with PVC lipping alround complete all as specified and shown on drg.
All as per Srl Item No 11.00 here-in-before but for key board tray, pull out tray fixed with telescopic channels-02 Nos complete all as specified.
All as per Srl Item No 11.00 here-in-before but for drawer, fixed with telescopic channels-02 Nos and knob-01 No complete all as specified.
All as per Srl Item No 11.00 here-in-before but for shelf (all horizontal , vertical and bottom), fixed with screws complete all as specified.
TABLE BED SIDE (Drg No FD/E6/MAP/15 (R) Sh 1/1) :M & L replacement of existing unserviceable Top of Table bed side with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 4 mm thick teak wood beading all round table top complete all as directed by Engineer in charge.
M & L replacement of unserviceable back of Table bed side of 06 mm thick and commercial ply wood size 450x410 mm, complete all as directed by Engineer in charge.
M & L for replacement of shelve of Table bed side made out of 12 mm thick BWR plywood with teak veneered surface on top & commercial on other side including 04 mm thick teak wood beading all round to exposed surface of shelves complete all as directed by Engineer in charge.
M & L for replacement of unserviceable side of Table bed side of size 510x230 mm made out of pre laminated particle board exterior grade with and including 04 mm thick teak wood beading to all exposed surface all round the sides complete all as directed by Engineer-in-charge.
ALMIRAH LARGE STEEL (Drg. No FD-67) Material and labour for replacement of leg made out of PBI sheet 1.00mm thick of almirah including cutting, welding turning, drilling, bending as requited shape complete all as specified and directed.
All as per serial item No. 13.00 here in before but Shutter made out of PBI sheet 1.00mm thick including hinges-2 Nos complete all as specified and directed.
All as per serial item No. 13.00 here in before but Shelves made of PBI sheet 1.00mm thick including brackets complete all as specified and directed.
Supply and fixing in repairs Mild steel lock, size 65mm with key in duplicate complete all as specified. Make: Harrison /Eleri/Anand.
Supply and fixing in repairs Mild steel chromium plated handle 100mm long complete all as specified.
Supply and fixing in repairs Mild steel brackets with screws to support shelves complete all as specified.
BED HARD STEEL (Drg. No FD/E6/MAP/08(R) & Similar Drawings) Taking out existing broken plywood from the bed hard by loosening the nut bolts with washers and Supply and fixing new 12 mm thick BWR grade plywood fixed to bed hard frame with new GI Nut, bolts complete all as specified.
Taking out existing broken head board from bed hard steel and Supply and fixing new head board with 18 mm thick exterior grade pre laminated MDF board both side laminated in light walnut shade or shade as approved by GE with 4mm thick teak wood beading in matching shade with new screws complete all as specified.
Taking out existing broken foot board form bed hard and Supply and fixing foot board with 18 mm thick exterior grade pre laminated MDF board both side laminated in light walnut shade or shade as approved by GE with 4mm thick teak wood beading in matching shade with new screws complete all as specified.
Spray painting all steel surface with existing shade and colour or as approved by GE after application of sand paper and grinder to make the surface smooth and even over red-oxide primer complete all as specified and directed.
Material & Labour for rubber shoe of approved quality to bed hard steel including Opening of and removal of old unsv shoe complete all as specified and directed by Engr-in-Charge.
Supply and fixing of stiffeners made of Square pipe 25 mm size having 1.6mm wall thickness including taking out the old unsv parts including one coat of red oxide primer and painting the steel frames with one or more coat of synthetic enamel paint black/olive green complete all as specified and directed by the Engr-in-Charge.
Material & Labour for replacement long rail made out of MS square pipe of required size all as per mentioned in drg including painting with two coats of synthetic enamel panit over a coat of red oxide primer complete all as specified and directed.
BATH MAT PVC : (Drg No FD/E6/MAP/07 Sh 1/1) Supply and fixing of bath mat PVC complete all as specified. Make : Cello/Supreme or equivalant
RECEPTICLE PVC : (Drg No FD/E6/MAP/13 Sh 1/1) Supply and fixing of recepticle PVC complete all as specified. Make : Cello/Supreme or equivalant
CHAIR DINNING Offrs: (Drg No FD/E6/MAP/04 Sh 1/1) ) Material & labour for following wooden parts made of 1st class Hard wood (Sheesham) duly smooth size and shape as shown on drg including removing/ taking off old unsv parts complete all as specified and as directed by Engr-in-Charge. (a) Front Leg
(b) Rear Leg
(c) Seat frame with cushion
(d) Front stiffener
(e) Rear stiffener
(f) Side Stiffner
(g) PVC Shoe
Material & labour for replacement of old unserviceable cushion with new cushion 40 density for chair dining Officer as per sample kept in BSO (W) JRC yard duly covered with tapesty cloth best quality, complete as specified and directed. Make: Kurlon or equipvalent.
CHAIR DINNING (Drg No FD-279 & 1105) Material & labour for following wooden parts made of 1st class Hard wood (Sheesham) duly smooth size and shape as shown on drg including removing/ taking off old unsv parts complete all as specified and as directed by Engr-in-Charge. (a) Front Leg
(b) Rear Leg
(c) Seat frame with cushion
(d) Front stiffener
(e) Rear stiffener
(f) Side Stiffner
(g) PVC Shoe
M&L for recanniing of chair dining which require canning . The canning shall be done in GODREJ PATTERN with half round plastic cane 2mm to 2.5mm wide and for border 3mm wide cane plastic including cutting and removing of old unserviceable cane from thre frame complete all shown on the draewing,specified and as directed by the Engineer-in-Charge.
M&L for recanniing of chair Easy which require canning . The canning shall be done in GODREJ PATTERN with half round plastic cane 2mm to 2.5mm wide and for border 3mm wide cane plastic including cutting and removing of old unserviceable cane from thre frame complete all shown on the draewing,specified and as directed by the Engineer-in-Charge.
M&L for recanniing of Chair Wrting which require canning . The canning shall be done in GODREJ PATTERN with half round plastic cane 2mm to 2.5mm wide and for border 3mm wide cane plastic including cutting and removing of old unserviceable cane from thre frame complete all shown on the draewing,specified and as directed by the Engineer-in-Charge.
M&L for prepartion of old steel surface of Chair Varandah commplete and applying one coat synthetic enamel paint (white) all shown on drawing, spdf and as directed by Engr-in-charge.Make of shynthetc eamel paint. Apocolite of Asian/ Superiac of shalimar (Drg No FD-19 & 256)
M&L for recanning of chair verandah require canning (Godrej pattern) with and including half round plastic cane 2mm to 2.5mm wide and for border 3mm wide cane plastic cane shall be conforming to IS: 5378-1994 type-I(HDPE) and type–II (LDPE) including cutting and removing of old unserviceable cane from the frame complete all as specified. Make of Cane : Shah Plastic/Premier
SANMATI UDYOG (BID ID -3499561)
M/S INDAN FURNITURE MART (BID ID -3495961)
KHAZAN SINGH SAWHNEY (BID ID -3503731)
om parkash and sons (BID ID -3498821)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.24 MB
TenderDocuments104.pdf
Tender Documents • 0.61 MB
BOQ_829527.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .