Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹2.2 L
EMD Value
₹6,617
Closing Date
11 Dec 2025, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SH. PANKAJ KUMAR
220 KV NEAR POLE FACTORY VIDHISHA ROAD ASHOKNAGAR
Estimate for 5 Km 11 KV Line Conductor Aug. for Vidisha Road Feeder Under Ashoknagar Dc under Ashoknagar Division
2025_MKVVC_466058_1
DGM/STC/ASKN/PUR/25/411 ASKN Dt 04-12-2025
Open Tender
Electrical Works
Percentage
O/O THE DGM STC-STM MPMKVVCL CIRCLE ASHOKANGAR
Please refer Tender documents.
3 documents required · 3 mandatory
₹590
Yes
₹6,617
Yes
24 Dec 2025
4 Dec 2025
12 Dec 2025
4 Dec 2025
11 Dec 2025
4 Dec 2025
Provision- Estimate for 5 Km 11 KV Line Conductor Aug. for Vidisha Road Feeder
140 Kg.,8.0 Mtrs. long PCC pole
140 kg. 8.0 mtr. Long PCC Pole erection-[Including Pit Digging- Base padding of pole by Stone Block/Pre cost Block, pole erection, back filling/boulder, earthing coil]
11 KV Pin Insulator Polymer Composit (5 KN)
Labour for 11 KV Pin Insulator Polymer Composit (5 KN)
11 KV Strain hardware (T&C type) fittings
11 KV(45KN) Composite Polymer Disc Insulators
Labour for 11 KV(45KN) Composite Polymer Disc Insulators
AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.)
Stringing of AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.)
Aluminium Binding wire and tape
Aluminium paint
Labour for Aluminium paint
Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG)
Labour for Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG)
Back filling of poles with boulders.
Danger Boards Enamelled 11 KV
Labour for Danger Boards Enamelled 11 KV
Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire
G.I. WIRES 4.0 MM. (8 SWG)
Labour for G.I. WIRES 4.0 MM. (8 SWG)
Jointing Sleeves suitable for Raccoon (80Sq.mm.Al. Eq.) AAAC conductor
M.S.Nuts with Bolts
Red oxide paint
Labour for Red oxide paint
Stone Block/Pre cast block for base pedding(450X450X75MM)
11 KV 'V' cross-arms angle type (65x65x6 mm angle)
Labour for 11 KV 'V' cross-arms angle type (65x65x6 mm angle)
11 KV V-cross arm making Labour Charge
Labour for 11 KV Top clamps angle type 65x65x6 mm
11 KV Top clamp making Labour Charge
D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel
Labour for D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel
Hole Making Charges for 6/8 inch per Hole
Channel cutting Charges (Per Section Cutting)
Clamps for 140 kg PCC pole (50x6 mm Flat)
Back clamps (50x6 mm flat) for 140 kg PCC Pole
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 1.07 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.01 MB
fulldovid.pdf
Tender Documents • 4.96 MB
BOQ_547968.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .