Loading…
Loading…
Tender Value
₹5.7 L
EMD Value
₹11,359
Closing Date
10 Jul 2026, 12:00 pm
Similar tender results from the same govt authority in the past 3 years.
Executive Engineer
Executive Engineer, CD-I, APWD, Rangat
Repair and renovation of Repeater Station at Sabari.
2026_APWD_23469_1
21/DB/CD-I/RGT/2026-27
Open Tender
Civil Works - Buildings
90 days
Sabari
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹11,359
23 Jun 2026
23 Jun 2026
10 Jul 2026
23 Jun 2026
10 Jul 2026
23 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. | 28.56 | sqm | 1,108.6 | ₹31,661.62 | 1 |
| 2Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. | ||||||
| 2.1 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 2.1 | sqm | 4,267.4 | ₹8,961.54 | 3 |
| 3Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. | ||||||
| 3.1 | Fixed to openings /wooden frames with rawl plugs screws etc. | 114 | kg | 249.95 | ₹28,494.3 | 5 |
| 4Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : | ||||||
| 4.1 | 250x16 mm | 1 | each | 423.4 | ₹423.4 | 7 |
| 5Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : | ||||||
| 5.1 | 200x10 mm | 2 | each | 123.6 | ₹247.2 | 9 |
| 6Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : | ||||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.32 MB
TenderDocument.pdf
Tender Documents • 16.28 MB
BOQ_24879.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid