Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.5 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹29.5 L+₹4.1 L (15.9%)Rejected-AOC | L2 | Rejected-AOC Not Lowest bidder | |
| 3 | L3₹29.8 L+₹4.3 L (16.8%)Rejected-AOC | L3 | Rejected-AOC Not Lowest bidder |
Tender Value
Refer Docs
EMD Value
₹48,000
Closing Date
30 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE NAGPUR
Commander Works Engineers Bldg No. P-9, Sitabuldi Fort, Nagpur-440 001 Pin-900419, C/o 56 APO
BALANCE LEFT OUT B/R AND E/M WORK OF EXTERNAL SERVICES FOR MAP ACCN (PH-II) AT POCKET NO.07 NAGPUR UNDER GE KAMPTEE
2023_MES_616692_1
84771/E8
Open Tender
Civil Works
Item Rate
120 days
GE KAMPTEE
As per tender document
7 documents required · 7 mandatory
₹500
Yes
GE KAMPTEE
₹48,000
Yes
20 Oct 2023
1 Sept 2023
2 Oct 2023
1 Sept 2023
30 Sept 2023
14 Sept 2023
Amount
(A) WORKS PERTAINING TO OH TANK/ UG SUMP Note:- i) The rate quoted against all items for overhead tank & UG sump shall be deemed to provide any scaffolding /safety measures as required at site and no extra claim shall be entertained on this account. ii) Water proofing work of OHT/Sump shall be carried only after sucessful completion of NDT tests.
Material and labour for Injection Grouting in RCC wall of Over head water tank / US sump by Providing and grouting at construction joint cementitious nozzles by injecting cement slurry mixed with grout admixture Cebex 100 of FOSROC @ 225 gms per bag of cement or by using eqivalent proved product and mixing as per manufacturer's instruction, in the required consistency through the pre fixed PVC/Aluminium/GI nozzles in 18 mm dia holes at 60cm c/c, fixing of nozzles with Renderoc Plug and final cutting the projected nozzles and sealing off the nozzles after the injection operation is over with Renderoc plug etc. at regular intervals as per the requirements all as directed. Make-FOSROC or equivalent in Sikka, Pidilite as approved. Note- Work should be carried out through authorised applicator of the company as approved by Garrison Engineer.
Material and labour for Injection Grouting in structural cracks (more than 1 mm) of RCC wall of overhead tank /UG sump by using Epoxy grout and executing injection/pressure grouting in cracks in the parent concrete by fixing PVC nipples at 150 mm to 200 mm distance or specified distances as per design and as detailed herein below:- (i) Pressure grouting using low viscous epoxy grout Conbextra EP 10(M) of Fosroc or equivalent having mix density 1060 kg/m3,Compressive Strength (ASTM D695)-60 N/mm2,Tensile Strength (ASTM C 304-97)-20 N/mm2, Flexural strength (BS 6319 Part 4)-45 N/mm2. (ii) Pressure grouting shall be done at required pressure etc. complete as directed. Make - FOSROC or equivalent in Sikka / Pidilite as approved. Note- (i) Work should be carried out through authorised applicator of the company as approved by Garrison Engineer. (ii) Payment shall be made on actual grout consumed.
Material and labour for UG sump Waterproofing Coating 1.0 mm thick on RCC wall of Over Head water tank/ UG sump including cleaning the internal surface areas thoroughly so that they are free of all contamination like dirt and laitance & to remove all the loose material by various mechanical means, removing all surface imperfection, protrusions, loose concrete all as specified herein below :- (i) Filling of cracks using SBR latex Nitobond SBR latex modified mortar in the ratio of cement sand (1:4) using 5% by weight of cement. (ii) Fillets at the junction of the walls and the slabs using cement mortar at 1:4 mix admixed with 5% of SBR latex Nitobond SBR latex by weight of cement. (iii) Applying 2 coats of 2 component, prepacked, polymer modified cementitious coating of tensile strength of 5 N/mm2 as per D412, Elongation 120% as per ASTM D 412, crack bridging of 2 mm as per ASTM C 836, applied @ 3kg/Sqm, coving at junction of wall and slab using polymer modified mortar and brush application of Nitocote CM210- High performance elastomeric cementitious waterproofing system in two coats as per manufacturer’s specification. (iv) Sprinkling sieved coarse sand on wet surface of final coating for better adhesion of plaster or screed. (v) Allow the coating to dry before covering with screed. Make - FOSROC or equivalent in Sikka/ Pidilite as approved. Note - Work should be carried out through authorised applicator of the company as approved by Garrison Engineer.
Material and labour for Over head water tank RCC internal wall Plaster Applying plaster of average 15 mm thickness admixed with Conplast WL - Integral Waterproofing liquid admixture as per IS 2645 at a dosage of 125 ml per 50 kg cement, Cement sand mortar (1:4) all as directed. Make - FOSROC or equivalent in Sikka/ Pidilite as approved. Note- Work should be carried out through authorised applicator of the company as approved by Garrison Engineer.
Providing and applying two coats of Nitocote EP 405- Solvent free epoxy resin coating as per CFTRI 21 CFR 175 – 300 of US – FDA, Water absorption nit as per ASTM C870:90 over plastered surface after proper surface preparation, mixing base and hardener of Nitocote EP 405 using mechanical drill and paddle and apply the same in 2 coats using suitable brush or roller etc.complete including all tools and tackles as per manufacturer’s specification. Make -FOSROC or equivalent in Sikka / Pidilite as approved. Note - Work should be carried out through authorised applicator of the company as approved by Garrison Engineer.
Material and labour for plinth protection with 75 mm thick PCC (1:3:6) type C-2 ( using 20 mm graded stone aggregate) over 75 mm thick (consolidated thickness) hard core by using broken stone boulders not exceeding 63 mm gauge, complete all as specified and as directed.
Material and labour for mild steel work as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof confirming to Fe-290, Gde E-165 including securing bolts complete all as specified and as directed.
Material and labour for applying two coats of synthetic enamel painting over a coat of red oxide primer on new steel surface including preparation of surfaces complete all as specified and as directed.
Material and labour for applying two coats of cement based paint over a coat of alkali resistant primer on plastered surface including preparation of old surfaces complete all as specified and as directed
(B) EXTERNAL ELETRIFICATION
Excavation in trenches not exc. 1.5 m wide and not exc 1.5 m in depth, for laying of pipes/ cables/ poles/ foundation etc and getting out in soft/loose soil complete all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not. exc 25cm thick each layers by using excavated soil complete all as specified and as directed.
Removing excavated material/soil to a distance not exceeding 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specefied and as directed.
Supply and fixing Double wall Corrugated High Density Polymer Ethylene (HDPE) pipe of size 180mm outer diameter and 162.5mm inner diameter as per IS 14930 (Part-2):2001 , laid in trenches/floors and fixed on walls/poles, with and including necessary fittings such as bends, sockets and other connected accessories etc., for laying of electric cables, complete all as specified and as directed.
All as per item Sl no. 13.00 herein- before but of size 120mm outer diameter and 103.5mm inner diameter complete all as specified and as directed.
All as per item Sl no. 13.00 herein- before but of size 50mm outer diameter and 38mm inner diameter complete all as specified and as directed.
Material and labour for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.
Material and labour for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.
Supply, Laying or fixing or passing through pipe, laid in trenches/ in road crossing, laid through duct pipes/ fixed to poles , of size 185 Sqmm 3 core , 11000 volts grade, XLPE insulated , HT screened , PVC bedded , galvanised steel strip or wire armoured , heavy duty electric power cable including jointing with necessary lugs, cable glands etc. and testing complete all as specified and as directed.
Hiring of cable fault detector, to detect exact position of fault for XLPE /PVC LT/HT cable, 1100 Volts/11KV grade heavy duty aluminium conductor of any size including to and fro transporting charges etc. complete all as specified & as directed .
Supply and fix cable jointing kit for 11 KV (Earthed) grade cable for outdoor type termination heat shrinkable type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 185 sqmm complete all as specified and as directed.
Supply and fix cable jointing kit for 11 KV (Earthed) grade cable for outdoor type straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 185 sqmm complete all as specified and as directed.
Material and labour for danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for HT, of size 25x20 cm complete all as specified and as directed.
Supply and fixing cable route indicator made out of CI circular plate 6mm thick fixed on top of angle iron 40 x 40 x 6mm, 100mm dia and 500mm long with nuts, bolts, washers of appropriate size including painting with two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer and embossing voltage grade/ size of cable as per IS Code and embedding in PCC 1:3:6, type-C1 bed blocks of size 300 x 300 x 300mm complete all as specified and as directed.
Supply and fixing galvanised mild steel pipe / tubing, of size 100 mm bore, light grade complete with all fittings, laid in trenches / under roads, drain, paths, fixed to poles/ walls with Mild steel clamps , bolts , nuts and washers complete all as specified and as directed. Note:- Excavation & earth work shall be measured and paid separately.
Laying, jointing, testing and commisioning LT cable of size 150 Sqmm x 3.5 core 1100 V grade PVC insulated , PVC sheathed armoured, heavy duty, electric cable with multi-stranded aluminium conductor laid in trenches/ passing through pipe/ duct road crossing on pole , wall complete all as specified and as directed. Note : i) Cable will be issued under Schedule 'B' free. ii) However jointing acessories such as lugs, cable gland etc,. shall be provided by contractor and rate of same deemed to be included in the quoted rates.
Material and labour for installing APFC panel of capacity 100 KAVR, including testing and commissioning microprocessor based automatic power factor control LT panel board (MPFCS) 433 volt, 50 cycles per second, cubical type, front & back openable double leaf type, dust &vermin proof with locking arrangement, powder coated with approved colour, made out of CRCA sheet 16 SWG, outdoor type with canopy, cable entry glands, double compression type, duly pre-wired with suitable pillars made out of 50mm x 50mm x 6mm angle iron, fixed on 50 x 50 x 5 mm MS angle frame fixed 300mm above groud level and 450mm below the ground grouted in and including PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) all as per latest IS specifications & suitable for housing & including supply and fix of connected accessories as required to make the panel functional complete Note : Panel only will be issued under schedule ‘B’ free for fixing and other items such as steel frame, PCC and connecting accessories shall be provided by the contractor which shall be deemed included in the rate quoted
Material and labour for earthing complete with galvanized iron earth plate electrode 600x600x6mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of earth plate not less than 1.5m below ground level connected to galvanized earth lead strip 32 x 6 mm by means of bolts, nuts, check nuts, washers of phospher bronze/naval brass/copper silicon all as shown in electrical plate No 3 connected to earthing test point all as specified and testing on completion including the material and labour for complete all as specified and directed. (a) Excavation and earth work in any type of soil. (b) Drilling of holes in electrode (c) PCC pit in cement concrete (1:2:4) type B-1 (d) Pre cast RCC cover with suitable handle 50mm thick in PCC (1:2:4) reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm. (e) Funnel with watering pipe of GI 20 mm nominal bore ,light grade & aluminium lug etc. (f) 40 mm nominal bore light grade GI protection pipe 7.50 m long for protection of earthing lead. (g) Requisite quantity of charcoal and common salt. (h) Connection to earthing test point and testing on completion.
Supply, erection, testing and commissioning complete of manufacture of OEM manufactured, static silent (sound proof enclosure) diesel Engine Driven generating set capable of delivering 25 KVA, water cooled, 415 volts (AC three phase, 4 wire ain system of supply) 50 HZ at power factor 0.8 minimum. The DG set shall consists of diesel engine coupled to a matching alternator, through flexible coupling and mounted on common base frame and complete with control panel standardized by manufacture's, fuel tank with mounting arrangements and inlet outlet return inlet oil arrangement exhaust pipe complete and suitable for conditions prevalent at Nagpur (capacity of Engine, alternators shall be worked out taking all derating factors into consideration) including PCC foundation (of suitable size leaving at least 0.5 M all around for easy of movement and 0.5 M height) anti vibration pads, including all features to complete with latest CPCB guidelines and comprising of following as described :- Make: Kirloskar /CG / Ashok Leyland/Cumins (A) ENGINE (Prime Mover): Diesel Engine 1500 RPM, direct injection, type four stroke, suitable for 25 KVA DG setconfirming to ISO 3046/ BS 5514, water cooled, naturally turbo charged, (Taking all derating factor into consideration), 12 Volt (as per manufacturer recommendations) electric battery start, complete with fly wheel all standard fittings /fixtures as per manufacturer and including suitable panel with tachometer, lub oil, temperature, pressure guage and frequency meters and also including self contd....
Contd... 38.00 starter system, dynamo, fuel electric control panel with electronic governor (ECPG) and engine protection system (shut down, High water temperature, low lub oil, oil pressure, over speed etc) fuel tank and first fill of lub oil and other consumables etc. (B) ALTERNATOR: Brushless AC alternator, 3 phase, 415 volt, 4 wire, rated for, minimum power factor 0.8, 1500 RPM, IP 23 protection class enclosure, insulation class "H" salient pole, revolving field single bearing automatic voltage regulator coupled through flexible coupling with and to match the above engine.25 KVA DG set Note: Alternator Capacity calculated as per ambient temperature 50 degree centigrade of Nagpur Area. (C) BASE PLATE: Made out of structural steel as per manufactures recommended design/specifications. (D) IN BUILT AMF CONTROL PANEL: Factory made cubical type Inbuilt AMF panel board, indoor type made out of MS angle not less than 25X25X5 mm and 2 mm thick MS CRCA sheet, front opening type, protection class IP- 54, duly powder coated after seven tank process, with electrolytic grade copper bus bar of 100 Amps capacity for four poles, with all standard switchgear and protection, internal wiring of adequate size PVC Insulated multistranded copper conductor cable etc and also consisting of following; (a) MCCB 63 Amp, 415 Volts, rating 4 pole 25KA, rupturing capacity, specially fixed for incoming supply with over load relay, short circuit and earth fault protection-01 Nos with suitable rating HRC back up fuses. contd....
contd....38.10 (b) AMF logic panel including wiring, power contactor with MCCB suitable capacity for DG Set of main supply, single phase preventor, digital multifunction meter (showing Amps, Volts, Hz, KWH etc), Emergency stop Button, DG Set over load, High water temp, Low lub oil pressure, Auto charging unit and failure to start, Phase indication lamp LED type RYB includig all relays, circuit and protection required for automatic operation of DG Set. (E) ACCOUSTIC ENCLOSURE: Sheet metal fabricated cope type silent enclosure manufactured on CNC machines as per CPCB norms and powder coated after seven tank process, the enclosure shall be designed for reducing the sound level to 75 DB (A) at a distance of 1 M at 75% load under field condition and OX, 70 DB at 3 M from Gen set when DG set is working at full load alongwith testing conformance, lebelling certification etc as laid down in GSR No 371 (E) dt 17 May 2002. (F) Foundation / Plinth /Base Shall be provided as per manufactures recommendations, however minimum 0.5 M space should be available all around the set and height of plinth shall not be less than 0.5 M. (G) Diesel storage tank as per manufacturer specification (H) MISC: Tool kit, operation and maintenance catalogue spare part list, overhauling manuals, guarantee card etc shall be provided as per manufacture standard practices.
Supply and fix for aviation obstruction light fitting, LED type, including lamp & all other accessories complete all as specified and directed. Make:- Philips cat part no.XGP 400 1xLED-K2-RD 240 Volts or equivalent in CG/ Surya/ Havells/ Bajaj.
Supply and fix aluminium strip , 25mm x 3mm with saddle and fixing screws etc ,for roof conductor and down conductors complete all as specified & directed.
Supply and fix test point terminal block made of gun metal or phosphorus bronze size 75 x75x25 mm drilled and screwed 3 Nos 8 mm dia 25 mm long hexagonal head screw including MS box of size 150 x150x 100 mm made out of 3 mm thick MS sheet including applying two coat of synthetic enamel paint over a coat of red oxide primer on inner and outer surfaces with 3 mm thick PVC laminated cover complete all as specified and directed.
Supply and fixing 2 core 4 Sqmm 1100 Volt grade heavy duty stranded conductor cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed with and including 25 mm dia rigit PVC conduit fixed on wall/column of over head reservior with necesary fixing arrangement such as gutties , screws or clamp etc complete all as specified and directed.
(E) EXTERNAL WATER SUPPLY NOTE :- Items of earthwork such as Excavation, returning filling , removing etc shall be measured under relevant items here-in-before.
Material and labour for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.
Supply & fix in repair CI mechanical joint adapter type complete with jointing materials such as rubber gaskets,nut,bolts & washers but for the cast iron pipe of 150mm bore complete all as specified and as directed
All as per item sl no. 35.00 herein-before but of 100mm bore complete all as specified and as directed
All as per item sl no. 35.00 herein-before but of 80mm bore complete all as specified and as directed
Cutting of cast iron pipe mains 150mm bore for insertion of tees, collars,sluice valves etc includiing dewatering work required for working water pipe lines complete all as specified and as directed
All as per item sl no. 38.00 herein-before but of 100mm bore complete all as specified and as directed
Supply and fix sluice valves of 150mm bore , flanged and drilled type PN-1.6 ISI marked with CI hand wheel and stainless steel spindle of IS:6603 bronze rings complete with jointing and jointing materials such as bolts, nuts, washers and rubber gaskets complete all as specified and as directed
All as per item sl no. 40.00 herein-before but of 100mm bore complete all as specified and as directed
All as per item sl no. 40.00 herein-before but of 80mm bore complete all as specified and as directed
Material and labour for high density poly ethylene pipes (HDPE) PE 100 of pressure rating 10 Kg/cm2, IS-4427, IS-4984 (1995) laid in trenches with all fittings and fixtures laid in trenches complete all as specified and as directed.
Supply and laying galvanised steel water tubing, 50 mm medium grade, including provision of (ISI marked) specials such as bends, elbows, tees, unions etc laid in trenches complete all as specified and as directed
Supply and laying in trenches ductile iron pipes of size 150mm, spigot and socketed ended class K-7 complete all as specified and as directed. Note: Earth work will be measured and paid seperately.
All as per item sl no. 45.00 herein-before but of size 100 mm complete all as specified and as directed
All as per item sl no. 45.00 herein-before but of size 80 mm complete all as specified and as directed
Material and Labour for gun metal globe valve 50 mm with iron wheel head heavy duty screwed both ends for iron pipe for union (ISI marked) complete all as specified and as directed.
Material and labour construction of brick masonary valve chamber of size 1000x1000x1000mm (Internal dimensions) with PCC foundation 1:4:8 type D-2 (using 40mm graded stone aggregate) 150mm thick, 150mm wide off sets all round over 100mm thick hard core, 230mm thick brick wall buit in CM 1:6 , 50 mm thick PCC 1:2:4 type B-1 coping finished even and smooth , without using extra cement internally including top of floor, excavation earthwork in any type of soil 3 mm thick MS sheet cover fixed on 40 mm x 40 mm x 6 mm thick angle iron frame with hold fasts embedded in PCC coping with locking arrangement , mild steel handles and painting to steel surfaces with two coat of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 50 m etc complete all as specified and as directed.
All as per Sl. item No. 49.00 herein-before but of internal dimensions 600 x 600 x 600mm complete all as specified and directed.
Material and labour CI /DI fittings for spigot socket end pipes up to 150mm, 100 mm or 80mm bore bends ( any type, radius and angle) Tapers any type ( straight bend , increasing , decreasing or double socket etc) tee pieces single branch Y junction double bend cross (all sockets or socket and spigot) collars, caps and plugs complete all as specified and as directed.
I P Constructions
CREATIVE CONSTRUCTION
Bidder Name
chronicle enterprises
CREATIVE CONSTRUCTION
I P Constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .