Construction of Balance Work at KGBV Dhanwalt Zone Kulwanta Distt Udhampur

Amount

Earth work in excavation in foundation by manual means over areas(exceeding 30 cm in depth and up to 1.50m depth 1.50 m in width as well as 10 sqm on plan ) , including disposal of excavated earth upto I metre for cutting of edges ,disposal earth to be leveled and neatly dressed.(70% All Soils and 30% S.Rock) (including all carriages lead and lift if any)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40mm nominal size nallah (including all carriages lead and lift if any)

Providing and laying in position (1:5:10) grade,under flooring using brick (40mm nominal size) (including all carriages lead and lift if any)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All works upto plinth level in M-15(1:3:6) grade with 20%boulders (including all carriages lead and lift if any)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcem 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size (including all carriages lead and lift if any)

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in Cement mortar 1 :6 ( 1 cement : 6 coarse sand) in superstructure upto floor V level. (including all carriages lead and lift if any)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. (including all carriages lead and lift if any)

Half brick masonry with bricks of class designation 75 in : Cement mortar 1 :4 ( 1 cement : 4 coarse sand) in superstructure upto floor V level. (including all carriages lead and lift if any)

Providing and Fixing flat iron, hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden flungs and embedded in concrete cement block 1:2:4 min (including all carriages lead and lift if any)

Centering and Shuttering including strulling, popping and removal of form work :drain and protection wall (including all carriages lead and lift if any)

Centering and Shuttering including strulling, popping and removal of form work : Lintel Beam (including all carriages lead and lift if any)

Centering and Shuttering including strulling, popping and removal of form work : Slabs (including all carriages lead and lift if any)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood (including all carriages lead and lift if any)

Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al!complete as per direction of engineer- in charge. Second class deodar wood (including all carriages lead and lift if any)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Ply wood 5 ply, 9 mm thick Decorative ply wood one side decorative veneer and commercial veneer on other face (type 1) conforming IS 1328 BWR type (including all carriages lead and lift if any)

Providing and fixing 35 mm glazed shutters for doors, windows and clerestory windows using 10 kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt· hinges bright finished of required size with necessary screws. (including all carriages lead and lift if any)

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works (including all carriages lead and lift if any)

Providing and fixing wooden mouled bedings to doors and window frame size (50 x 12)mm 2nd class teak wood (including all carriages lead and lift if any)

Providing and fixing hand rail by welding etc to steel ladder, railing, balcony, railing and staircase railing including priming coat of approved steel primer GI tube (40mm) nominal size (including all carriages lead and lift if any)

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) (including all carriages lead and lift if any)

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) (including all carriages lead and lift if any)

6mm cement plaster 1 : 3 (1 cement: 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams (including all carriages lead and lift if any)

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand . : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mmthick with 20mm nominal size stone aggregate. crushed (including all carriages lead and lift if any)

Providing and fixing Ceramic gla.z:ed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete. (including all carriages lead and lift if any)

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (including all carriages lead and lift if any)

Finishing walls with water proofing cement of required shade new work (two or more ocats) applied @ 3.84 kg/10 sqm (including all carriages lead and lift if any)

Providing and Applying white cement based putty of average thickness 2mm of approved brand and manufactured over the plastered wall surface to prepeare the surface even and smooth (including all carriages lead and lift if any)

Distampering with oil based bound washable distemper of approved brand and manufactured on wall surface new work ( two or more coar) ocer and including priming coat with cement primer (including all carriages lead and lift if any)

Applying priming coat of approved brand and maufacturer on new wrok (including all carriages lead and lift if any) (including all carriages lead and lift if any)

Printing with synthetic enamal paint of Approved brand and manufacturer to give an even shade, two or more coat on new work (including all carriages lead and lift if any)

Steel work welded in built up section/framed works including cutting,hoising,fixing in position and applying a primer coat of approved steel primer using structural steel primer as required TRUSS. (including all carriages lead and lift if any)

Providing corrugated G.S sheet roofing fixed with polymer coated J or L hooks,bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limpet washers fille with white lead and including a coat of approved steel primer and two coats of approved paint on overlaping of steels complete(upto a pitch of 60 degrees),excluding the cost of purlins,rafters and trusses. 0.63 mm (including all carriages lead and lift if any)

Providing and laying plinth protection in cement concrete 1:3:6 excluding the cost of centering and shuttering, all work upto plinth level with crushed stone aggregate over 75 mm thick under layer of dry brick bats, including all costs and carriage of all material involved (including all carriages lead and lift if any)

providing and fixing aluminium sliding door bolts ISI marked anodize ( anodic coating) not less than grade AC10 as per IS 1868) transpaent or dyed to required colour or shade with nuts and screw etc complete (300 x 16)mm (including all carriages lead and lift if any)

Providing and fixing Aluminium tower bolts ISI marked anidized (anodic coating) not less than grade AC 10 per IS 1868) transpaent or dyed to required colour or shade with screw etc complete (300 x 16)mm 100 x 10 mm = 122 nos @ Rs 47.60 (including all carriages lead and lift if any)

Providing and fixing Aluminium tower bolts ISI marked anidized (anodic coating) not less than grade AC 10 per IS 1868) transpaent or dyed to required colour or shade with screw etc complete (300 x 16)mm 200 x 10 mm = 64 nos @ Rs 78.1 (including all carriages lead and lift if any)

Providing and fixing Aluminium hanging floor door stopper ISI marked anidized (anodic coating) not less than grade AC 10 per IS 1868) transpaent or dyed to required colour or shade with twin rubber stopper (including all carriages lead and lift if any)

Providing and fixing Aluminium handels ISI marked anidized (anodic coating) not less than grade AC 10 per IS 1868) transpaent or dyed to required colour or shade with nuts and screw etc complete 125mm = 32 x 2 = 64no (including all carriages lead and lift if any)

Providing and fixing Aluminium handels ISI marked anidized (anodic coating) not less than grade AC 10 per IS 1868) transpaent or dyed to required colour or shade with nuts and screw etc complete 100mm = 94 no (including all carriages lead and lift if any)

Providing and fixing white vilreous china pedestial type water with europen type seat and lid, CP brass hinges and rubber buffers, 10 ltr low level various china flushing cistern with fillings. CI/MS brackets 40mm diameter flush bend, overflow arrangement with special of standard make WC plan with ISI marked while solid plastic seal lid with vitreous china flushing and CP lush bend (including all carriages lead and lift if any)

Providing and fixing salem stainless steal A ISI 304 (18/8 kitchen sink as per IS 13983 with CI brackets stainless steel plugs 40 mm including painting of fillings and brackets, cutting and making the good walls wherever required. Kitchen sink with drain board 470 x 420 mm bowl depth 178 mm (including all carriages lead and lift if any)

Providing and fixing wash basin with Ci brackets 15mm Cl brass pillar taps, 32 mm CP brass waste of standard pattern, including, painting of fillings fillings and brackets, cutting and making the good walls wherever required. White vitreous china wash baisin size 630 x 450 mm (including all carriages lead and lift if any)

Providing and fixing white vitreous china pedestial for with baisin completely at the back for the reception of pipes and filling (including all carriages lead and lift if any)

Providing and fixing GS Pipes complete with GI fitting and clamps including cutting and making good the wall etc (external work) 15mm nom dia 50 m (including all carriages lead and lift if any)

Providing and fixing GS Pipes complete with GI fitting and clamps including cutting and making good the wall etc (external work) 20mm nom dia 50 m (including all carriages lead and lift if any)

Providing and fixing GS Pipes complete with GI fitting and clamps including cutting and making good the wall etc (external wall exposed on wall) 15mm nom dia 50 m (including all carriages lead and lift if any)

Providing and fixing GS Pipes complete with GI fitting and clamps including cutting and making good the wall etc (external wall exposed on wall) 20 mm nom dia 10m (including all carriages lead and lift if any)

Providing and fixing PVC waste water / rain water disposal 100 mm nom dia 80 m @ rs 200/m (including all carriages lead and lift if any)

Providing and fixing PVC waste water / rain water disposal 75 mm nom dia 602 m @ rs 175/m (including all carriages lead and lift if any)

Providing and Fixing PVC bends 75 mm dia pipe = 20 nos (including all carriages lead and lift if any)

Providing and Fixing PVC bends 100 mm dia pipe = 20 nos (including all carriages lead and lift if any)

Providing and Fixing PVC pipes for sink or wash basin including PVC waste fittings complete 40 mm dia (including all carriages lead and lift if any)

Providing and Fixing CP brass long nose cock of app quality 15 mm nom dia (including all carriages lead and lift if any)

Providing and Fixing Cpstop cock ( conceled/ of standard design)conforming to is 8931 15mm nominal bore (including all carriages lead and lift if any)

Providing and Fixing brass bib cock of app quality (including all carriages lead and lift if any)

Providing and fixing towel rod 6 nos (including all carriages lead and lift if any)

Providing and fixing towel rod Towel ring 20 no (including all carriages lead and lift if any)

Providing and fixing CP bras angle valve for basin mixer and giyser points of approved make conforming IS 8931 15 mm nom (including all carriages lead and lift if any)

Providing and fixing (600 x 450) mm bevelled edge mirror of superior glass( of approved quality) complete with 6mm thick hard based ground fixed to wodden with CP brass screws and washers complete (including all carriages lead and lift if any)

Providng and fixing terrace polyethelene water storage tank (including all carriages lead and lift if any)

Providing and laying glass strips in the flooring 40 x 4mm (including all carriages lead and lift if any)

Electric wiring with 1.5 sqmm copper cable including 20mm dia,2mm thick pvc pipe,5 AMP switch,sunken box and connections to themain pole complete as directed by engineer in charge. (including all carriages lead and lift if any)

Dry random rubble masonry with hard stone in foundations and plinth( using without Bond stone) (including all carriages lead and lift if any)

Om Parkash Parihar

sanjeev singh

M/s Mohd Azam Wani and Sons

M/S ABDUL KARIM WANI

M/s Swami Raj