Construction of Toilet Block And Electrical Work at SWM site of Shedbal TP Limit.

Construction of Toilet Block And Electrical Work at SWM site of Shedbal TP Limit.

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...

Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...

Form Work: As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. PWD Common DSR 2023-24 Volume 1 (P No: 111 Adden...

Form Work: As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. PWD Common DSR 2023-24 Volume 1 (P No: 111 Adden...

Form Work: As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. PWD Common DSR 2023-24 Volume 1 (P No: 111 Adden...

Form Work: As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. PWD Common DSR 2023-24 Volume 1 (P No: 111 Adden...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) inc...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, ...

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat mo...

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to ...

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests SR 2023-24 Page No 131 I No 14.1.1 (Volume-II)

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 SR 2023-24 Page No 119 I No 13.12 (Volume-III)

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 25 mm nominal bore SR 2023-24 Page No 117 I No 13.4.1 Base Rate 549 Add 5% 27.45=576.45 (Volume-III)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing Single lever sink cock (Lifting type cold water cartridge) with swivel spout and wall flange made of Stainless steel with all concealed fitting arrangements & all necessary acceso...

Providing and fixing Wall Mixer Telephonic with crutch only made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class b Premium SR 2023-24 Page No 143...

Providing and fixing Single flow hand showers with Anti lime jets with 1.5m PVC tube and holder made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Cl...

Providing and fixing 100 mm sand cast Iron grating for gully trap. CSR P No.136 /I No.14.29 Vol-2

Providing and fixing toilet paper holder C.P. brass: CSR P No.136 /I No.14.34.1 Vol-2

14.38 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mmhigh and 112 mm distance from wall of standard shape with bracket ofthe same materials with snap fittings of approved quality a...

450 mm long towel rail with total length of 495 mm, 78 mm wide andeffective height of 88 mm, weighing not less than 170 g. CSR P No.137 /I No.14.40.1 Vol-2

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :14.32.1 Cir...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

KSRB13-10 : Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00 kgs/sqcm working pressure of outside diameter chemp plast I Wavin or equivalent make with pipe fittings, wall ...

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc 100x58x1.9mm. CSR.2023-24 P No.106/I No.12.68.2 Vol -2

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete 100mm. CSR.2023-24 P No.107/I No.12.73.2 Vol -2

Providing and fixing aluminium tower bolts, ISI marked, anodised (an odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws et...

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

Supplying heavy gauge PVC Conduit Pipe 20 dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire ...

Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. 12" x 12" x 3" ...

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Lamp Holder P No.10/I No.3.14.6 CSR Ele 2023-24 Vol-6

1.1 kV Class HR (Heat Resistant) PVC Insulated & Sheathed Aluminium Single Core Lead wires as per IS-694: 2010 PVC Wire - 2.5 Sqmm Weight per 100 Mtr Coil: 1.8 Kg P No.21/I No.48.Escoms CSR 2023-24

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 16 Amps P No.14/I No.5.7.1 PWD Ele CSR 2023-24 Vol-6

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch P No.9/I No.3.6.10 PWD Ele CSR 2023-24 Vol-6

Supplying and fixing of Modular MCB Devices (Tripper) With Breaking capacity of 6k A.16 - 32 A SP. P No.21/I No.5.46.1 PWD Ele CSR 2023-24 Vol-6

Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete.1 to 2 Way. P No...

GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long,3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg. P No.22/I No.51.01.Escoms CSR 2023-24 Vol-6

Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each. P No.22/I No.51.02.Escoms CSR 2023-24 Vol-6

Good Quality Salt for grounding purposes packed in 50 Kg gunny bag. P No.17/I No.54.03 Escoms CSR 2023-24 Vol-6

Digging of Pit for providing GI Pipe type Earthing LABOUR RATE Ordinary soil. P No.43/I No.1.6.1 Escoms CSR 2023-24 Vol-6

8 SWG GI Wire MT - PER KG (4.064 mm Dia), Std Wt: 125 Kg/KM. P No.5/I No.8.02 Escoms CSR 2023-24 Vol-6

Brass Cable Gland 25mm. P No.28/I No 63.01 Escoms CSR 2023-24 Vol-6

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

LED Tube Light Fitting with Tube . P No.136/I No.67.18 PWD Ele CSR 2023-24 Vol-6

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...