GE/SRA/T-24/2023-24

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down/out unserviceable Wires only from the existing Sub-main Wiring of any type and any description, without disturbing Existing Conduit, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn through and including Rigid Non-metallic PVC Conduit 25mm in size, medium grade, ISI marked and its Accessories in Concealed (Partly)/ Surface (Partly) with necessary grouting of required size and depth on Wall and Making Good in Cement Mortar 1:3, providing PVC Gang Box (minimum 2.0mm thick)/Sunk Mild Steel Pressed Terminal Box (1.6mm thick) of suitable size( as required) duly painted with Red Oxide Metal Primer with 2.0mm thick Plastic Laminated Sheet Top Cover (as per Site requirement) for mounting Switches, Sockets, Fan Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE LIGHT/FAN POINT/ BELL POINT CONTROLLED BY ONE 1-WAY SWITCH 6 AMP, complete all as specified and as directed. (NOTES :- (i) Where tube light fitting is to be fitted/ suspended, CI Circular boxes shall be provided with the PVC Pipes in the ceiling & the unit rate shall be deemed to be included for the same. (ii) Quoted rate shall be deemed to be inclusive of the cost of terminal box & laminate cover. (iii) Cost of cutting chases for concealed wiring shall be deemed to be inclusive in the quoted rates. No claim in this regard shall be entertained at a later stage)

-Ditto- as item No 03 but for ONE 5 PIN SOCKET OUTLET 6 AMP ON THE SAME BOARD, complete all as specified and as directed.

-Ditto- as item No 03 but for ONE 5 PIN SOCKET OUTLET 6 AMP ON INDEPENDENT BOARD, complete all as specified and as directed.

All as per item No. 03 above but for one light point controlled by two 2-way switches complete all as specified and directed (surface type point wiring with terminal box).

M&L Point Wiring with 4.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable with 4.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Cable, drawn through and including Rigid Non-metallic PVC Conduit 25mm in size, medium grade, ISI marked and its Accessories in Concealed (Partly)/ Surface (Partly) with necessary grouting of required size and depth on Wall and Making Good in Cement Mortar 1:3, providing PVC Gang Box (minimum 2.0mm thick)/Sunk Mild Steel Pressed Terminal Box (1.6mm thick) of suitable size duly painted with Red Oxide Metal Primer with 2.0mm thick Plastic Laminated Sheet Top Cover (as per Site requirement) for mounting Switches, Sockets, Fan Regulators, etc. Earth Continuity Cable connected to Common Earth dolly for ONE 6 PIN SOCKET 16 AMP ON INDEPENDENT BOARD, complete all as specified and as directed. (NOTES :- (i) Where tube light fitting is to be fitted/ suspended, CI Circular boxes shall be provided with the PVC Pipes in the ceiling & the unit rate shall be deemed to be included for the same. (ii) Quoted rate shall be deemed to be inclusive of the cost of terminal box & laminate cover. (iii) Cost of cutting chases for concealed wiring shall be deemed to be inclusive in the quoted rates. No claim in this regard shall be entertained at a later stage)

M&L for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and incl PVC conduit complete with all fittings and accessories (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for One light point or one fan point or bell point controlled by one switch or bell push complete all as specified and directed. (NOTE :- (i) Where tube light fitting is to be fitted/ suspended, CI Circular boxes shall be provided with the PVC Pipes in the ceiling & the unit rate shall be deemed to be included for the same. (ii) Quoted rate shall be exclusive of the cost of terminal box & laminate cover which shall be measured seperately. (iii) Cost of cutting chases for concealed wiring shall be deemed to be inclusive in the quoted rates. No claim in this regard shall be entertained at a later stage)

All as per item No 08 here-in-before but for one 5 pin 5/6 amp socket out let point in the same switch board of light points (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches

All as per item No 08 here-in-before but for one 5 pin 5/6 amps multisocket outlet point in independent board (concealed wiring) (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches

All as per item No. 08 above but for one light point controlled by two 2-way switches complete (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches

All as per item No 08 above but using 4.0 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core for line conductor and 4.0 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core for earth continuty wire for one 15/16 amp multi socket out let independent. (concealed wiring) (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches

Materials and Labour for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in existing PVC conduit complete with all fittings and accessories, fixed to walls/ceiling, including mild steel terminal boxes 1.25 mm thick conforming to IS-5133 (Part-I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one light point /bell point/ ceiling fan/exhaust fan point controlled by one way switch complete all as specified and directed. (NOTE: Wiring shall be done in existing conduit. Quoted rate shall be excusive of the cost of conduit)

All as per item No. 13 above but for one 5 amps switch socket combination on independent board, complete all as specified and directed (concealed type point wiring with terminal box in existing conduit).

All as per item No. 13 above but using 4.0 sqmm single core multi stranded copper conductor FRLS-H PVC insulated and unsheathed, cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and incl 4.0 sqmm green FRLS-H PVC insulated and unsheathed, copper conductor as continuous earth wire with lugs complete all as specified and directed (concealed type point wiring with terminal box in existing conduit).

S&F Sub-main Wiring with 2-Runs of 4.0 Sqmm (nominal area) 1100 Volt, PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 1-Run of 4.0 Sqmm (nominal area) 1100 Volt, PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty Cable along with the Wiring drawn in PVC CONDUIT complete all as specified and as directed. (NOTE: The wires shall be provided in existing conduit. Quoted rates shall be exclusive of the cost of conduits)

S&F Sub-main Wiring with 2-Runs of 6.0 Sqmm (nominal area) 1100 Volt, PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 1-Run of 6.0 Sqmm (nominal area) 1100 Volt, PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty Cable along with the Wiring drawn in PVC CONDUIT complete all as specified and as directed. (NOTE: The wires shall be provided in existing conduit. Quoted rates shall be exclusive of the cost of conduits)

PIANO SWITCH, 5/6 AMPS, SINGLE POLE, ONE WAY

S & F new Switch piano, flush type

S&F in repairs new piano switch, flush type (incl taking down existing switch)

PIANO SWITCH, 5/6 AMPS, SINGLE POLE, TWO WAY

S & F new Switch piano, flush type

S&F in repairs new piano switch, flush type (incl taking down existing switch)

PIANO SWITCH, 15/16 AMPS, SINGLE POLE, ONE WAY

S & F new Switch piano, flush type

S&F in repairs new piano switch, flush type (incl taking down existing switch)

SOCKET OUTLET, 5 PIN, 5/6 AMPS,

S & F new socket outlet, flush type

S&F in repairs new socket outlet, flush type (incl taking down existing outlet)

SOCKET OUTLET, 6 IN 1, 3 PIN, 6/16 AMPS,

S & F new socket outlet, flush type with indicator lamp

S&F in repairs new socket outlet, flush type with indicator lamp (incl taking down existing outlet)

SWITCH SOCKET COMBINATION OUTLET, 3/5 PIN, 5/6 AMPS,

S&F new switch socket combination outlet, flush type

S&F in repairs new switch socket combination outlet, flush type with indicator lamp (incl taking down existing outlet)

SWITCH SOCKET COMBINATION OUTLET, 6 IN 1, 3 PIN, 6/16 AMPS,

S & F new switch socket combination outlet, flush type with indicator lamp

S&F in repairs new switch socket combination outlet, flush type with indicator lamp (incl taking down existing outlet)

BELL PUSH, 5/6 AMPS, 240 VOLTS

S&F new Bell push, flush type

S&F in repairs, Bell push, flush type (incl taking down existing fitting)

CALL BELL/BUZZER, AC 230/240 VOLTS, SINGLE POLE

S&F new Call bell, musical type

S&F new Call bell, ding dong type

S&F in repairs Call bell, musical type (incl taking down existing fitting)

S&F in repairs call bell, ding dong type (incl taking down existing fitting)

CEILING ROSE, THREE TERMINALS, 240 VOLTS

S&F new Ceiling rose, surface type

S&F in repairs, ceiling rose, surface type (incl taking down existing fitting)

FAN REGULATOR, STEPPED TYPE, 5 SPEED CONTROL, 230/240 VOLTS

S&F stepped type electronic fan regulator, flush type, 100 watts

S&F in repairs stepped type electronic fan regulator, flush type, 100 watts (incl taking down existing fitting)

LAMP HOLDER, PVC/POLYCARBONATE BODY

S&F lamp holder with back plate suitable for batten fittings or to be mounted on walls

S&F in repairs lamp holder with back plate suitable for batten fittings (incl taking down existing fitting)

MODULAR SWITCH, 5/6 AMPS, 1 MODULE, ONE WAY

S & F Modular Switch 1 way 6 A, 1 module

S&F in repairs new modular switch, 5/6 Amps, 1 module (incl taking down existing switch)

MODULAR SWITCH, 16 AMPS, 1 MODULE, ONE WAY

S & F Modular Switch 1 way 16 A, 1 module

S&F in repairs new modular switch, 16 Amps, 1 module (incl taking down existing switch)

MODULAR SOCKET, 6 AMPS, 2 MODULE

S & F Modular Socket 6 A, 2/3 pin combined 2 module

S&F in repairs new modular socket, 6 Amps, 2 module (incl taking down existing switch)

MODULAR SOCKET, 16 AMPS, 2 MODULE

S & F Modular Socket 6 A/ 16 A, 2/3 pin combined 2 module

S&F in repairs new modular socket, 6 A/ 16 A, 2/3 pin combined 2 module (incl taking down existing switch)

MODULAR FAN REGULATOR

S & F Modular Fan step regulator, 120 watt, 2 module

S&F in repairs new modular Fan step regulator, 120 watt, 2 module(incl taking down existing switch)

MODULAR BELL PUSH

S & F Modular Bell push 6A, 1 module

S&F in repairs new modular Bell push 6A, 1 module (incl taking down existing switch)

MODULAR BLANKING PLATE

S & F Modular Blank plate, 1 module

S&F in repairs new modular Blank plate, 1 module (incl taking down existing switch)

MODULAR TYPE WHITE/IVORY COVER PLATE WITH FRAME

S & F Modular type White cover plate with frame 3 module

S & F Modular type White cover plate with frame 6 module

MODULAR TYPE METAL FLUSH BOX

S & F Modular type Metal Flush box 3 module

S & F Modular type Metal Flush box 6 module

S&F 25 Amps motor starter switch, modular type complete all as specified and directed.

S&F in repair Hylem sheet for mounting switches,sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover of size 200 x 150 x 50 mm including cutting for mounting of switches and sockets, complete all as specified and as directed. (NOTE: This item shall not be measured for new point wiring)

S&F in repairs Hylem sheet for mounting switches,sockets,fan regulator etc with 3 mm thick plastic laminated sheet cover of size 250 x 200 x 50 mm including cutting for mounting of switches and sockets, complete all as specified and as directed. (NOTE: This item shall not be measured for new point wiring)

S&F in repairs Hylem sheet for mounting switches,sockets,fan regulator etc with 3 mm thick plastic laminated sheet cover of size 350 x 300 x 50 mm including cutting for mounting of switches and sockets, complete all as specified and as directed. (NOTE: This item shall not be measured for new point wiring)

S&F surface mounted LED luminaire, 1 X 20 Watt in aluminium housing, 110 lumen/watt, operating voltage 180-270 V, with acrylic/polycarbonate difuser & integrated constant current electronic driver complete with all other accessories internally prewired and including connecting up with three core flexible copper wire of suitable size complete all as specified and directed.

-ditto- as per Item No. 43 but of 1 X 9/10 Watt capacity in polycarbonate housing with lumen output not less than 105 lumen per watt

-ditto- as per Item No. 43 but of 1 X 05 Watt capacity in polycarbonate housing with lumen output not less than 105 lumen per watt

S&F LED Bulkhead fitting 09/10 watt, with IP65 degree of protection and with impact resistance of IK-08, mounted on wall /ceiling connected with insulated unsheathed flexible copper wire of suitable size complete all as specified and directed.

S&F recess mounted LED luminaire, of size 300 mm x 1200 mm, 110 lumen/watt, in powder coated CRCA housing , having glare free diffuser, operating voltage 180-270V, with constant current electronic driver complete with all accessories with and including 36 Watt LED and including all accessories, mounting frame etc and connecting up with three core flexible copper conductor wire of adequate size complete all as specified and directed.

All as per Item No. 47 above, but 36 Watt recess mounted LED luminaire, of size 600 mm x 600 mm complete

All as per Item No. 47 above, but 36 Watt surface mounted LED luminaire, of size 600 mm x 600 mm complete

S&F recess mounted LED flat panel luminaire, 100 lumen/watt, suitable for 300 mm x 300 mm snap grid ceiling, , in powder coated CRCA housing , having glare free diffuser, operating voltage 180-270V, with constant current electronic driver complete with all accessories with and including 15 Watt LED and including all accessories, mounting frame etc and connecting up with three core flexible copper conductor wire of adequate size complete all as specified and directed.

-ditto- as per Item No. 50 but surface mounted LED flat panel type of capacity 18 Watt

S&F recess mounted slim-fit downlighter, 100 lumen/watt, round or square, having glare free frosted diffuser, operating voltage 180-270V, with constant current electronic driver complete with all accessories with and including 15 Watt LED and including all accessories, mounting frame etc and connecting up with three core flexible copper conductor wire of adequate size complete all as specified and directed.

-ditto- as per Item No. 52 but recess mounted LED downlighter of capacity 12 Watt

-ditto- as per Item No. 52 but recess mounted LED downlighter of capacity 06 Watt

-ditto- as per Item No. 52 but surface mounted LED downlighter of capacity 15 Watt

-ditto- as per Item No. 52 but surface mounted LED downlighter of capacity 12 Watt

-ditto- as per Item No. 52 but surface mounted LED downlighter of capacity 06 Watt

NOTE FOR ITEM NO. 43 to 57 :- (1) List of approved makes has been provided in particular specifications. Contractor shall ensure that luminaire provided comply with the aforesaid specifications. No claim shall be entertained during currency of work. (2) Contractor has to furnish a replacement warranty of 02 years for LED light fittings complete incl lamps from the date of completion of work. The product will be replaced free of cost in following cases :- (a) Manufacturing Defects. (b) Failure due to mechanical and electrical impact. (c) Drop in lumen (or lux at 1 metre) below 90% of claimed value of lumen (or lux at 1 metre) of the LED/luminaire. (d) Decision of GE in this regard shall be final and binding. (3) All LED/luminaire shall meet the provision laid down in IS-16101, 16102 Part-I/II, 16103 Part-I, 16104, 16105, 16106, 16108/2012 and 15885 Part-II/Section 13. (4) The contractor shall submit the LM-80 and LM-79 test report (except decorative fitttings) as specified in Particular Specifications. (5) Any touch up of the wall surface due to changing of fitting shall be done by contractor with similar surface finish without extra cost to the department.

Taking down of Old MCB DB any type any size including MCCB/RCCB/MCBs and disconnecting the serviceable MCBs and keeping in safe custody for reuse at site or removal from site complete all as specified and directed.

S&F DB, VTPN, 4 way, vertical type, IP 43 protection, double door (premium range), 415 volts with provision for MCCB as incomer and MCB as outgoing and electrically connecting up complete all as specified and directed.

S&F DB, VTPN, 4 way, vertical type, IP 43 protection, double door (normal range), 415 volts with provision for MCCB as incomer and MCB as outgoing and electrically connecting up complete all as specified and directed.

S&F TPN DB, IP 43 protection, double door (premium range), 415 volts, 4 way (8+12), with 100 Amps copper bus bar for each phase complete all as specified and directed.

All as per Item No. 61 above 4 Way (8+12) TPN DB (normal range) complete all as specified and directed.

S&F SPN DB, IP 43 protection, double door (Premium range), 240 volts, 4 way, with 100 Amps copper Bus Bar complete all as specified and directed.

All as per Item No. 63 above 4 Way SPN DB (normal range) complete all as specified and directed.

S&F Double Door, Sheet Metal Enclosure for DBs (Premium range), for mounting of MCB for 240 Volts, 8 way, with 100 Amps rated copper bus bar, Single Pole & Neutral, complete all as specified and directed.

All as per Item No. 65 above 8 Way SPN DB (normal range) complete all as specified and directed.

S&F Sheet Metal Enclosure, Single Pole with a 2-Pin and Earth Plug and Socket with and including 1 No. MCB Single Pole, 32 Amp, 240 Volt and Connecting up complete all as specified and as directed.

NOTE FOR ITEM NO. 59 to 67 :- (1) Incoming MCCB/RCCB/MCB and outgoing MCBs shall be measured and paid seperately. (2) Quoted rate is deemed to be inclusive of blanking plate for slots remaining blank after fixing of MCBs. (3) DB, MCCB, RCCB & MCB shall be of the same manufacturer.

S&F MCCB (premium range), 4 pole, 100 Amps, 16 kA, 415 Volts, AC, 50 Hz with and including adjustable thermal and magnetic setting, fixed in DB complete all as specified and directed.

S&F MCCB (ordinary range), 4 pole, 100 Amps, 16 kA, 415 Volts, AC, 50 Hz with and including adjustable thermal and magnetic setting, fixed in DB complete all as specified and directed.

S&F MCB (premium range), 'C' series, TPN, 415 volts, 63 Amps, breaking capacity 10KA complete all as specified and directed.

S&F MCB (normal range), 'C' series, TPN, 415 volts, 63 Amps, breaking capacity 10KA complete all as specified and directed.

S&F MCB (premium range), 'C' series, SPN, 40 Amps, breaking capacity 10KA complete all as specified and directed.

S&F MCB (normal range), 'C' series, SPN, 40 Amps, breaking capacity 10KA complete all as specified and directed.

S&F MCB (Premium Range), 'C' series, single pole, 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed.

S&F MCB (normal range), 'C' series, single pole, 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed.

Supply only saddle/pvc gitti for fixing of PVC electrical conduict 25 mm packet of 100 complete all as specified and as directed.

Supply only electrical conduit PVC pipe 25 mm MMS type of length 03 Mtr, medium grade complete all as specified and directed.

Supply only electrical conduit PVC Casing caping pipe 25 mm MMS type of length 03 Mtr, medium grade complete all as specified and directed.

Supply only accessories for PVC conduits or casing capping such as Elbow, Tee, Coupling, Internal, External, Reducer complete all as specified and directed.

Supply only accessories for PVC conduits or casing capping such as Square Box, Junction Box complete all as specified and directed.

Supply, laying, jointing and testing, fixing to wall using clamps/ pole/ floor or in air or passing through pipes/ducts/road/path/drain, laid in trenches, 1100 volts grade heavy duty electric cable XLPE insulated, screened, PVC bedded, galvanised steel wire or wire armoured with electric power cable 1100 volts grade with stranded aluminium conductor of size 4 core 16 sqmm confirming to IS-7098 Part-1 and its latest amendments including takinf down existing unserviceable cable complete all as specified and as directed by Engr-in-Charge.

Materials and Labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanized steel earth wire 4 mm dia (upto 7.5 metres) by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 45 cm x 45 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 40 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing and dismantling of existing unsv earthing complete all as shown in Figure 15A of IS 3043 :1987, complete all as specified and directed.

shiv shanker enterprises

SHIVAM ENTERPRISES

M/s Luxmi Constructions

YOGINDER KUMAR GUPTA AND COMPANY

Aditi Formation Company

M/s Satguru Traders

Ajay Enterprises

STAR CONSTRUCTIONS