Replacement of floor tiles and other allied works at VTC at Sasti Sub Area

Amount

Dismantling tile work in floors and roofs laid in cementmortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

Earth work in excavation by mechanical means (Hydraulicexcavator) / manual means in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, includinggetting out the excavated soil and disposal of surplusexcavated soil as directed, within a lead of 50 m.

Supplying and filling in plinth with sand under floors, includingwatering, ramming, consolidating and dressing complete

Providing and laying in position cement concrete ofspecified grade excluding the cost of centering andshuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominalsize derived from natural sources)

Brick work with fly ash briick ( 1:6) 1 cement and 6 sand

12 mm cement plaster of mix1:6 (1 cement: 6 fine sand

Providing and fixing white vitreous china pedestal typewater closet(European type W.C. pan) with seat and lid,10 litre low level white P.V.C. flushing cistern, includingflush pipe, with manually controlled device (handle lever),conforming to IS : 7231, with all fittings and fixturescomplete, including cutting and making good the wallsand floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply,including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includesjointing of pipes & fittings with one step CPVC solventcement and the cost of cutting chases and making goodthe same including testing of joints complete as perdirection of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc 15 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply,including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includesjointing of pipes & fittings with one step CPVC solventcement and testing of joints complete as per direction ofEngineer in Charge. Internal work - Exposed on wall25 mm nominal dia Pipes

Providing and fixing wash basin with C.I. brackets, 15 mmC.P. brass pillar taps, 32 mm C.P. brass waste of standardpattern, including painting of fittings and brackets, cutting and making good the walls wherever requireWhite Vitreous China Wash basin size 630x450 mm with asingle 15 mm C.P. brass pillar tap

Providing and fixing on wall face unplasticised Rigid PVCrain water pipes conforming to IS : 13592 Type A, includingjointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter

Providing and fixing white vitreous china flat back halfstall urinal of size 580x380x350 mm with white PVCautomatic flushing cistern,with fittings, standard size C.P.brass flush pipe, spreaders with unions and clamps (all inC.P. brass) with waste fitting as per IS :2556, C.I. trap with outlet grating and other couplings in C.P. brass,includingpainting of fittings and cutting and making good the wallsand floors wherever required Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

Repairs to plaster of thickness 12 mm to 20 mm in patchesof area 2.5 sq.meters and under, including cutting thepatch in proper shape, raking out joints and preparing andplastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete asper direction of Engineer-in-Charge.With cement mortar 1:4 (1 cement : 4 fine sand)

Providing and placing on terrace (at all floor levels)polyethylene water storage tank, IS : 12701 marked, withcover and suitable locking arrangement and makingnecessary holes for inlet, outlet and overflow pipes butwithout fittings and the base support for tank.

Providing and laying Vitrified tiles in floor with differentsizes (thickness to be specified by the manufacturer), withwater absorption less than 0.08% and conforming toIS:15622, of approved brand & manufacturer, in allcolours and shade, laid with cement based high polymermodified quick set tile adhesive (water based) conformingto IS : 15477, in average 6 mm thickness, includinggrouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm

Providing and laying Vitrified tiles in floor in different sizes(thickness to be specified by the manufacturer) withwater absorption less than 0.08% and conforming toIS:15622, of approved brand & manufacturer, in allcolours and shade, laid on 20 mm thick cement mortar 1:4(1 cement: 4 coarse sand) jointing with grey cement [email protected] kg/sqm including grouting the joints with whitecement and matching pigments etc. The tiles must be cutwith the zero chipping diamond cutter only . Laying of tileswill be done with the notch trowel, plier, wedge, clips ofrequired thickness, leveling system and rubber mallet forplacing the tiles gently and easilyGlazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm

Providing and laying Vitrified tiles in different sizes(thickness to be specified by manufacturer), with waterabsorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riserof steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry@ 3.3 kg/ sqm including grouting the joint with whitecement & matching pigments etc. completeSize of Tile 600x600 mm

Clearing grass and removal of the rubbish up to a distance of50 m outside the periphery of the area cleared.

Providing and fixing 600x450 mm beveled edge mirror ofsuperior glass (of approved quality) complete with 6 mmthick hard boardground fixed to wooden cleats with C.P brass screws and washers complete

Providing and fixing PTMT towel ring trapezoidal shape215 mm long,200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement ofapproved quality and colour,weighing not less than 88 gms.

Providing and fixing PTMT liquid soap container 109 mmwide, 125 mm high and 112 mm distance from wall ofstandard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing notless than 105 gms

Providing and fixing brass bib cock of approved quality 15 mm nominal bore

Providing and fixing brass stop cock of approved quality 15 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel ofapproved quality (screwed end) :25 mm nominal bore

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required said and colour complete to give and even said. Old work (one or more coats)

Total impact of GST for the purpose of CTC

Arvindkumar Singh

SHYAM JOSHI

M A SIDDIQUEI

M/s P K CONSTRUCTION

SANTOSH BHONGARE

Omprakash Yadav