DINDIGUL DISTRICT VADAMADURAI PANCHAYAT UNION Rural Building Maintenance Scheme -2025-26 TN-05-10

1. Name of the work :Repairs to RCC Anganwadi Centre Building at S.Pudupatty H/o Sukkampatty of Vadamadurai Panchayat Union Estimate Amounts :Rs.194000/-

Dismantling , clearing away and carefully stacking materials useful for re-use of One Course of Pressed Tiles laid in cement mortar without weathering course including all labour charges etc., complete.,complying with standard specifications

Chipping the Concrete and Roughening the Concrete Surface and removing away the debries from site including all labour charges etc.,complete complying with standard specificationsincluing all labour Charges etc., Complete.,

Clean removal of Cement plaster from wall and ceiling and removed away from the site including all labour charges etc.,complete

Plastering with Cement Mortar 1:5 (One cement and Five Crushed Stone P.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Paving Floor with scratch proof ceramic tiles of any colour of size 200x200 x 6mm, laid in C.M 1:3 mix 20 mm thick & pointing with colour cement using 0.40kg per sq.m including cost & conveyance of all materials to site and all labour charges etc.complete

Providing granolithic floor finish to an average thickness of 20mm with plain cement concrete 1:2:4 (One Cement, Two Crushed Stone M-sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 20cmx20cmx20mm of approved quality laid in cement mortar 1:3 mix to 12mm thick (One Cement, Three Crushed Stone M-sand ) mixed with water proofing compound confirming to ISS by 2% weightof cement used and the joint pointed neatly to full depth of tiles with same water proofing compound with cement mortar, red oxide, etc., complete complying with std. Specifications. (Using 40% New tiles materials labour charges completed)

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. ( Old Plastered Surface)